Fully Automated Craft Brewery 30hl/brew with Meura Mash Filter This fully automated 30 hl craft brewery, installed in 2015–2017, is in excellent condition and represents high-end European brewing technology. The system is a complete, turnkey solution including all necessary auxiliary equipment. The brewery is still installed and fully operational. The brewhouse has a capacity of 30 hl per brew and is capable of producing approximately 6–8 brews per day. It features a traditional three-vessel configuration equipped with a Meura mash filter for efficient wort separation. The brewery has been used to produce a wide range of both filtered and unfiltered beer styles. The cold block includes 3 × 75 hl fermentation tanks and 2 × bright beer tanks. Additionally, the system is equipped with advanced beer filtration capabilities, including a GEA centrifuge (unitank-compatible), kie ...
Complete production and filling plant for a pub brewery, consisting of the following components: 1. Milling plant Milling mill with malt feed hopper and pipe chain conveyor system for malt grist. 2. Brewhouse 2-unit brewhouse (Kaspar Schulz, built in 2013) as a brewing block with copper-clad stainless steel vessels. The wort is cooled by a separate plate heat exchanger (API Heat Transfer, built in 2013) with downstream wort aeration. There is also a hot water tank (Kaspar Schulz, 2013) with insulation and heating jacket. 3. Fermentation and storage cellar 4 cylindroconical fermentation and storage tanks (Kaspar Schulz, built in 2013) with a gross volume of 12 hl each and a maximum overpressure of 3 bar. 3 cylindroconical fermentation and storage tanks (Kaspar Schulz, 2013) with a gross volume of 25 hl each and a maximum overpressure of 3 bar. The temperature of these 7 cylindroconical fe ...
Micro Brewery 2-Vessel 5hl Braukon 750hl / annum The brewery is a modular 5 hl two-vessel Braukon brewhouse system with a separate whirlpool, designed for production of both top- and bottom-fermented beers. Brewing is controlled with manual valves, but brew vessels and temperature controls are made with Braukon brew control PLC. Upto 18° Plato high gravity beer production is also possible with this brew line. Brew vessels are bottom heated with hot water generated with plate heat exchanger from low pressure steam and wort is heated with external boiling system. The 2-vessel system is constructed entirely in stainless steel (AISI 304) and delivered as a fully integrated, pre-piped and pre-wired unit, enabling rapid relocation works. Nominal capacity is 3–4 brews per day, depending on recipe and process parameters which is approx. 750 hl/annum. Brew control is semi-automatic and made ...
consisting of: - Malt milll - Mash-/Wortkettle/Whirlpool - Lauter tun - Warmwater vessel - Wort cooler - Wort aeration - Siemens touch screen - 4 x Fermenting vessel - 8 x Storage tanks with shell cooling surface - Icewater vessel - mobile beer pump - Steam boiler - 2 Bottle-filler + 1 Can-filler by Fillmatic - bottle filler A. Gruber, Additional title: 5 hl-Brewery, with Grist Mill, Compact-Brewhouse, Fermenting vats, Storage tanks, Cast out wort: 500 l, Capacity wort cooler: 750 l/h, Wort cooling time: 40 min., Material: Brewing vessel, hotwater tank, fermenting and storage tanks in stainless steel, 1.4301, Base construction: Brewhouse compact unit on stainless steel frame, vertical Fermenting vats on feet, horizontal storage tanks on two layer in a stainless steel frame., Features: mobile grist mill, mash-/wortkettle, lauter tun, warm water tank, wort-cooling and aeration, 4 fermentin ...
The brewing system has a 470 L wort kettle and a 500 L lauter tun. The heating is electric with 21 kW heating power. The heating is in the walls and floor ordered. The brewhouse yield is max. 74%. The original gravity can be brewed up to 18 degrees Plato . Two-vessel brewhouse, consisting of a mash tun/wort kettle combination and a lauter tun/whirlpool vessel. Under the mash tun is a highly efficient pump with which the wort is mixed and passed between the devices by means of hoses. can be transported here. recipe management, automatic mashing program, timer function and manual Operating modes are operated via a control system, which has a 7-inch touch display. The built-in plate heat exchanger for re-pouring preparation makes it possible to use tap water directly to the required temperature and by means of nozzles in the lid of the lauter tun directly and gently. No addition ...
A complete - with a production capacity of approx. brew is for sale. The brewhouse comprises a mash tun, mash kettle, lauter tun, and wort kettle. The system was modernized and rebuilt several times between 1990 and 2001, resulting in a combination of traditional copper construction and modernized stainless steel components. The brewing vessels are robust and efficient in design: the mash tun and lauter tun are made of copper, and the wort kettle also has a copper core with stainless steel inner lining and an integrated inner boiler. The mash tun is made of stainless steel (1977). The equipment also includes a pan vapor condenser, wort cooling, plate cooler, and peripherals such as a spindle station, wort pumps, drain pump, and hot water tank. The CIP system allows for convenient cleaning of the wort kettle, including two 20 hl containers for lye and acid; the remaining vessels can ...
10BBL Brewery Complete Brewery Consisting of : 10 Brl Brewhouse (Hot Liquor Tank, Mash Tun with Underback and Kettle/Copper) built and installed by Johnson Brewery Designs in 2011. The brew house is powered by immersion heaters and requires a 3 ph (415v) electricity supply. The Majority of brewery pipework is hard piped and integrated with Brewhouse pumps, includes in-line hop seed filter, 10 Brl per hour Heat Exchanger (previously operating on 11ºC well water) and able to chill wort down to 18ºC The Wort kettle is set up to use whole hops Grist Case. 350 kg capacity with 8m x 4” auger tube ( 2 tonne per hour) feeding to grist hydrator. Typical mashing in time 12min to 14min HWT: Gross Capacity 2,500, Temperature controlled with recirculation pump. 2 x 12 kW Immersion elements. Top manway access for additions. Overflow Pipe. Mash Tun: Maximum Grist capacity 500 kg. ...
5UKBBL / 800Liter Brewery Stainless Steel, Insulated & Clad in Wood. Mash Tun with Wedge-wire Floor Plates & Front Manway. Copper with 18kW & 12kW Elements (both new) & Copper Dome Top. Hot Liquor Tank with 2 x 18kW Elements; One New. 3 x Fermenting Vessels with Temperature Probes, Tops & Lids; Raised On Stainless Steel Legs. Cold Liquor Tank, raised on Stainless Steel Legs. Underback / Hopback Vessel. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
50 HL Brewhouse Manufactured by fabdec in 2013 Gas Fired brew house consisting of Mash tun/kettle/hot liquor tank/underback/heat exchanger/wort pump/swing bend plate /work platform/gas burner and associated pipework and fittings This is a SECOND HAND brewhouse and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk For more information and more available stock please visit us at - advancedbrewing.co.uk
Second hand ABUK 5 BBL Brewery System System consists: - 5 BBL Hot Liquor Tank; electric heating element. - 5 BBL Cold Liquor Tank; 1000 litre square IBC, plastic. - 5 BBL Mash Tun; drilled-plate floor, re-circulation & thermo-well. - 5 BBL Kettle designed for WHOLE FLOWER HOP; low-level thermo-well; electric heating elements. - (2x) 5 BBL Fermenting Vessels; sample taps; extension legs; racking outlet. - Under-back. - Hop Seed Strainer. - Plate Heat Exchanger. - Fixed / welded / partially flexible brewhouse pipework. - Brewers Hoses. - Butterfly & Diaphragm Valves. - (3x) Pumps & Pump Adaptors. - Remote Ice-bank Cooler with internal heat dump. - Electrical Control Panel. SECOND HAND SOLD AS SEEN. For more information and more available stock please visit us at - advancedbrewing.co.uk
This plant is currently intact and fully connected. The footprint is rectangular and measures approximately 9x5 metres (not including the steam plant, which is in a separate building, adjacent to the brewery). All brewery pipework is stainless steel with clamp-type connectors. The Vessels are all 1,250 litres (except for the glycol tank). - Hot Liquor Tun with level sight. - Mash Tun with wedge-wire filter and powered rakes; inlets for sparge; CIP and Vorlauf. - Combined Copper / Whirlpool with 2 x outlets; exhaust condenser; CIP ball. - Glycol Tank; 2,500 Litres. - 5 x Cylindro-conical, insulated fermenters with CIP, pressure gauge, sample outlet, spunding valve, racking and base outlets. - Side and top-entry access door. - Bright Beer Tank. Spec. as fermenters, but without the conical base. - 2 x Glycol Chillers. - Two Stage Heat Exchanger (water/glycol) with clamp-typ ...
Beer Brewery Two Vessel VELO 15hl/brew, up to 4000hl/annum Complete two-vessel beer brewing line manufactured by Italian VELO (now part of TMCI Padovan), suitable for producing a wide range of beer styles—from ales and lagers to non-alcoholic beers and high-strength varieties such as Imperial Stouts over 10% ABV. The standard brew size is 1,500 liters, with the capability to produce two brews during a 10-hour day in peak season. The maximum malt load per batch is 600 kg. Without sugar addition, wort strengths range from 18.5° to 21° Plato; with sugar addition, up to 35° Plato. A complete brew cycle, including CIP, takes approximately 5–6 hours. In regular operation, brewing batches have been overlapped: once lautering and spent grain removal from the first batch is complete, the next brew begins. With 10-hour working days, the maximum weekly capacity is six brews (three ...
Braumeister Micro Brewery System – 500 L The Braumeister is a fully automated brewing system designed for simplicity of operation, ease of cleaning, and reliable performance. It features a five-step automated control process that streamlines the brewing cycle and ensures consistent results. The 500-liter system is well suited for small commercial applications such as bars, cafés, and pilot breweries, as well as for highly experienced home brewers. The unit is supplied with integrated wheels and a hoist for ease of handling. It has a compact footprint, fully automated operation, and a jacketed vessel for efficient cooling. The system also includes a whirlpool function, making it a comprehensive solution for small-scale commercial brewing. Technical Characteristics Manufacturer Speidel GmbH Model Braumeister 500 Litre Manufacturing year 2016 Capacity approx. 500 l fin ...
Microbrewery – Brewiks 500 L, 760 L/brew, 5,000 L/month – 2017 This is a complete two-vessel microbrewery, installed in 2017, equipped with all essential components for brewing, fermenting, and packaging beer in glass bottles. It is ideal for small- to medium-scale production. The main unit is a Brewiks 500 L two-vessel system, comprising two multifunctional tuns: • Mash Tun / Boiler / Pasteurizer • Lauter Tun / Sparging / Whirlpool Both vessels have been modified by Mithreum, including the addition of a manhole for easier spent grain removal. The Mash Tun / Boiler has a maximum capacity of 760 liters and can produce two brews in 8–11 hours, depending on the beer type. The current monthly capacity is approximately 5,000 liters, limited by fermenter volume. If higher output is needed, the Brewiks 500 system can be upgraded with a Brewiks PLUS module (an additional bo ...
Craft brewery for craft beers is available for sale as machine equipment or as a takeover of the business and rented premises consisting of: - Main brewing plant Fabr. HG Machinery, with 3-vessel brewhouse, 12 hl net wort output, electr. Steam generator, 10 hl hot water tank, malt mill, plate cooler. YOC 2023 - 8 x 600 lt fermentation tanks and 2 x 12 hl storage tanks furthermore: - Second plant for small batches with 2-unit brewhouse for 500 lt net wort output, gas-heated - Third system for e.g. brewing courses with 2-device brewhouse for 120 lt net wort output, el. Heated, with 120 lt plastic fermentation tank, KEG cleaning system, air compressor, KEGs, bottles and much more. The facility is still under construction.
Complete brewery 2 appliances - 6 hl per brew 1 brew per day possible Year of manufacture 2013 - Manufacturer: Caspar Schulz / Germany Consisting of: malt reception and transport 2 devices brewhouse - lauter tun - wort cooler - fermentation and storage tanks - brewhouse technology complete - bottle filler - KEG cleaner etc. - PROJECT: BRAU-KOMPLETT-25-6HL-2GER-HEBAF
Subj.: Offer about second-hand brewery Dear Mr Wamae, We have pleasure to provide you with an offer about second-hand brewery that is immediately for sale. Qty. 1 Second-hand brewery - BREWERY BM500 Mfc.: Speidel, Kreyer / Quantor Built: 2016, 2019, 2021 Brewing capacity: approx. 500 l Finished beer: approx. 550 L wort Heating coil: 6 x 3000 W Pump: 1 x 370 W Electrical connection: 400 V Total power: 18.4 kW Cooling: 1.8 m2 double-jacketed cooling jacket Can cool the wort to 25 °C in approx. 120 minutes with ice water and whirlpool. Extra wort cooler Large cooling coil Extra wort cooler plate cooler Max. malt quantity: 120-135 kg Control unit IP 65 Water resistant Touchscreen 5" Control Voltage: 24 V Dimensions: L 253 cm x W 130 cm x H 277 cm CAN for future accessories Connectable unit Wifi and Bluetooth for control. Scope of supply: Brewer ...
CIP Facility Year of construction 2012 á 4 containers Acid + Alkali + Disinfection + Water á 300L
Steam generator Loos / Germany Type US-H54 Year of construction 2009 With oil burner 67 Kw Operating pressure 3-6 bar
Malzmühle Fa. Künzel Type 16/16 2 reels Malt hopper with scales Shotgun - 1.5 KW Built in 1994
Complete brewery 2 devices 6 hl per brew 2 brews per day possible Year of construction 1994 - 2022 Manufacturer: Rudolf Würth / Austria Consisting of: malt reception and transport- 2 devices brewhouse - lauter tun - wort cooler- fermentation and storage tanks - brewhouse technology complete etc.- PROJECT: BREWERY-COMPLETE-25-6HL-2GER-MAWAAU
Craft of restaurant brewery: ready-made kit with turnkey installation, including commissioning, staff training and 3 beer recipes. For the production of any type of beer - both bottom and top fermentation. Equipment material: stainless steel DIN 1.4301 / AISI 304 • any type of beer can be brewed (lagers, ales, wheat, etc.) • the infusion or decoction brewing method is based on the original Austrian calandria technology: easily controlled and automatically controlled heating occurs without direct contact of the heating elements with the raw materials, and without the use of steam • the brewer can program many automatic processes independently • the volume of one brew can be increased to 2 x 1000 = 2000 l by installing a second brew kettle • automation: after the start, brewing can occur without the presence of a brewer, which is especially convenient in the case of nigh ...
CAT NO: 23-0078 https://eurolux.de/product/23-0078-meura-sudhaus-kleinsudhaus-kleinbra uerei-65-hl AS UNI HÖRN steam-heated brewhouse for a 6.5 hl. Thanks to the heatable intermediate tank, 13 hl are possible in the double brew. A fermentation cellar equipment consisting of a 10 hl fermentation tank and 2 x 6.8 hl insulated, coolable tanks is also offered.
BAVARIAN BREWERY TECHNOLOGY - 80HL BREWERY WITH TANKFARM YEAR 2009, UPGRADED 2020 FORMER DARK STAR UK BREWERY Alan Ruddock Complete Malt Milling System with Steels Masher Bavarian Brewery Techology Mash Mixer Bavarian Brewery Techology Lauter Tun Bavarian Brewery Techology Brew Kettle Bavarian Brewery Techology Whirlpool Scada Control System (2020) HLT Vessel 1 8500 Litre HLT Vessel 2 8500 Litre CLT Vessel 20,000 Litre Brewhouse Pumps, Flowmeters, Valves, Pipework TANK FARM 6x Bavarian Brewery Technology Stainless Steel Jacketed Conical Fermenter, 9,000 litre 4x Biomashin Stainless Steel Jacketed Conical Fermenter 9375 litre, 2011 4x Biomashin Stainless Steel Jacketed Dish bottom tank, 9200 litre, Year 2012 TMINOX 20,500 litre CCT Jacketed Stainless Steel Conical Fermenter TMINOX 20,500 litre CCT Jacketed Stainless Steel Conical Fermenter Also 37 bbl ...
1 of used single-infusion brewery, make DME, capacity 32 HL / 20 BBL. RECENTLY Decommissioned – EXCELLENT condition! Brewhouse Single infusion temperature Mash Vessel with Grist Hydrator, Gas fired kettle and separate whirlpool vessel suitable for whole hops and pellets Grain Handling Floor mounted Grist case with flexible grain elevator leading to Grist hydrator Hot Liquor tank 10,000 litre vertical cylindrical vessel with stainless steel shell, shallow cone top and base. 2 x 18kW electric heating element, temperature pocket. 1.5 inch Tri Clamp outlet, Round Top Manway, all in T304. Free standing on stainless steel legs and feet . Insulated on the shell, clad in fully welded stainless steel 2.160,00 mm Diameter x 4.290,00 mm high Cold liquor tank Size and specification as per the above HLT but with a suitably sized external chilling panels Liquor Blending System Te ...
100hl Complete Brewery Location: UK SCADA Controlled 100HL SPR UK brewery capable of 3 brew cycles per day Mash Conversion Vessel Lauter Tun Copper Kettle Whirlpool Porteus Mill System Scada Control System 100hl FV x 4 200hl FV x 3 200hl MV x 6 200hl Bright Beer Tanks x 2 50hl Rough Beer Tanks x 2 50hl Bright Beer Tank FV 50hl Schenk Filtration System Yeast tanks x 5 CIP System x 2 Heat Exchanger x 5 Stainless Steel mixing tanks Stainless Steel buffer tanks Spirax Condensate recovery x 2 Babcock Wanson Steam Generator Abac Air Compressor Water Treatment Plant Various Stainless Steel Pumps Laboratory Equipment CO2 Tank Glycol Chiller
The syrup room is designed to mix sugar with water to a given concentration of the resulting Brix of syrup, heat treatment of the syrup, in order to increase biological resistance. Capacity: until 10 t/h Operating mode: automatic Registration of mixing, pasteurization process parameters Automatic control of temperature, flow, pressure Touch control panels Memory configuration The choice of settings for different operating modes Syrup room consists of: sugar loading into the system unit mixing tank I hot water preparation unit for syrup with distribution panel I filtration unit buffer tank pasteurizer blending tanks with pumping station distribution panel II tank for mixing components cabinet for system control with touch control panel
used
Qty. 1 Second-hand pub brewery Mfc.: EcoBrewtech Capacity: 15 hl Built: 1996 Consist of: 2 Vessel Brewhouse 3 x 15 HL fermenting tanks (w/ cooling jacket) 4 x 15 HL BBT (w/ cooling jacket) 4 x 15 HL BBT (PED) 1 water tanks 20 HL Steam generator (NEW): 106.4 kWn, 150 kg/h Steam, 5 bar ITWS (NEW): 25800 kcal Malt handling
Brewery museum Beautiful restored collection of historic brewery equipment, as for example copper sprinkler system cooler, bottle filler, mass filter, barrel filler and much more.
Cat. No. 11-3210 New Plant description Sudwerk This small-sud plant comprises all components for a complete and fully functional brewing plant. All system parts used have a high quality standard and are characterized by their ease of use. The two-device brewhouse consists of a mash/spice pan and a purified vat, which is also used as a hot tub. Technical description All pipes are cleaned by a circulation pumping system. a) In the mash pan, the mash is boiled, then the mash is pumped with the beer pump into the purifier pond. b) When bluish, the wort is pumped back into the mash pan. c) After bluish, the purified vat is cleaned and the sieve bottom removed. A special injection nozzle is installed on the cylinder wall at the bottom of the läuterbottich. As a result, it can also be used as a hot tub after removing the mobile screen floor. d) After boiling the hops ...
Cat.-Nr. 11-3210 new Basic Equipment The Brew House is complete with all equipment. All equipment are with high standard an very simple to use. This 10 hl Brew House is built as 2 devices-brew house manual version with manual butterfly valve. It is possible to make 2 brews/day (40 hl) Technology All the pipes can be cleaned and sterilized in the circuit over the pump included. a) In the mash boiler the mash will be cooked, then it will be pumped with one beer pump made of stainless steel from mash boiler to the lauter tun. b) After the lauter wort will be pumped back to the mash boiler. c) After emptying the lauter tun the grit floor will be removed. The lauter tun will be changed to a whirlpool. d) After cooking the hops a special injection valve is introduced inside the lauter tun so that it can be used as a whirlpool. Mashing Tun / Wort Boiler Volume brutto: ...
Cat.-Nr. 11-3200 new Necessary space for mash and lauter tun: LxWxH: 3 x 2 x 2,80 m Necessary space for tanks: LxWxH: 4,0 x 5,0 m complete 2 brews / day = 10hl Basic Equipment The Brew House is complete with all equipment. All equipment are with high standard an very simple to use. This 5 hl Brew House is built as 2 devices-brew house manual version with manual butterfly valve. It is possible to make 2 brews/day (10 hl) Technology All the pipes can be cleaned and sterilized in the circuit over the pump included. a) In the mash boiler the mash will be cooked, then it will be pumped with one beer pump made of stainless steel from mash boiler to the lauter tun. b) After the lauter wort will be pumped back to the mash boiler. c) After emptying the lauter tun the grit floor will be removed. The lauter tun will be changed to a whirlpool. d) After cooking th ...
