2905 offers

maximum number of results exceeded > 1000
please refine your search

Category: 605: other textile machines
New in: used
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

Max. working width: 3000mm, with two expander rolls, bottom illumination and automatic edge control.

Category: 209: other wood working machines
New in: 2007
Price: request quote
Location: Land-be BE
Seller: Vebim

Vertical machining center with 3 axis Panel sizes: length 250 to 3200 mm, width 120 to 820 mm, thickness min. 10 mm, max. 60 mm top machining head 26 drilling spindles (18 vertical / 8 horizontal) Grooving saw in X/Y Router 6,6 kW bottom machining head 26 drilling spindles (18 vertical / 8 horizontal) Grooving saw in X/Y Router 6,6 kW

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-de DE 51107 Köln, Porzer Str. 70 B
Seller: AY-BACK Technik Bäckerei & Gastronomiemaschinen

SERVEX SB KühlthekeEdelstahl approx. 270 cm breitgebrauchtschöne well-preserved SB refrigerated counter from stainless steel and Plexiglas3 floors with 18 valves to open after top rear 4 sliding Windows to the Bestückenauf the left side below stainless steel tray with drain for Flaschendarüber 2 Glass plates approximately 120 x 40 cm (B x T) the height of individual disciplines is seen from bottom to top: approx 38 cm; about 2 x 15 cmauf the right side from the bottom after seen above: approx. 21 cm, 18 cm and 15 cmauf of the right side 3 glass plates of approx. 58 x. 40 cm (B x T) below storage space, right refrigeration unit front tray approx. 34 cm width right: approx. 200 cm wide she ...

Category: 203: planing machines
New in: 1990
Price: request quote
Location: Land-be BE
Seller: Vebim

Capacity: in 180 x 130 mm., out 170 x 120 mm Feed speed: 6 to 28 m/min, 2,2 kW motor Cardan shaft drive Pneumatic pressures Spindles: 8 Bottom 5,5 kW, fence 5,5 kW, near 5,5 kW, fence 5,5 kW, top 11 kW, top 7,5 kW, bottom 5,5 kW, universal 5,5 kW Spindles 40 mm diameter Spindle speed: 6000 rpm Mechanical digital read-out Infeed table length: 2 m. Max. cut on 1st spindle: 10 mm. Min tool diameter: 100 mm, max tool diameter: 180 mm on first and universal spindle, 195 mm on vertical spindles, 200 mm on top spindles and 2nd bottom spindle Safety hood

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-de DE 51107 Köln, Porzer Str. 70 B
Seller: AY-BACK Technik Bäckerei & Gastronomiemaschinen

KMW MR2A18HSSX net cooling rack 230 V with cold roller blind used good condition 3 shelves 180 x 42 cm (W x D) Each shelf front has an approx. 5 cm-wide strips for price tags bottom tray 180 x 64 cm (W x D) height-adjustable feet Technical data: Manufacturer: KMW Model: MR2A18HSSX NET Climatic class 3 (25°C/60% RH) Rated power: 2240 W 10.38 A Fan: 20 W 0.28 A Condensate heating: 500 W 2.17 A Furniture lighting: 47 W 0.21 A Aggregate: 1573 W 7.7 A Refrigerant: R404a 2,6 kg Dimensions: Width: 190 cm Depth: approx. 83 cm Height: 205 cm The Cabinet is cleaned and tested for function. Inspection prior to purchase is required. Pick up must be maximum 10 days af ...

Category: 203: planing machines
New in: 1990
Price: request quote
Location: Land-be BE
Seller: Vebim

Capacity: 220 x 130 mm. Spindles: 4 Bottom 5,5 kW, fence and near 7,5 kW, top 5,5 kW Cardan shaft drive Variable feedspeed Pneumatic pressures 4 cutterblocks Setting gauge Safety enclosure Width and thickness with mech/dig readout

Category: 707: catering machines
New in: used
Price: request quote
Location: Land-de DE 51107 Köln, Porzer Str. 70 B
Seller: AY-BACK Technik Bäckerei & Gastronomiemaschinen

HOBART UW 205 commercial dishwasher Stainless steel 380 V used Commercial dishwasher with large tub suitable for boxes, plates, pots, kettle etc top 2 rinse arms, bottom 2 rinse arms 3 course Rinse Dimensions: Width: 120 cm Depth: 76 cm Height: 187 cm Open the door is approximately 43 cm forward Dimensions in: Width: 105 cm Depth: 60 cm Height: 80 cm The unit is cleaned and tested for function.

Category: 203: planing machines
New in: 1985
Price: request quote
Location: Land-be BE
Seller: Vebim

Capacity in: 180 x 130 mm. Spindles: 6 40 mm spindles Bottom 4 kW, fence 4 kW, near 5,5 kW, fence 5,5 kW, top 5,5 kW, bottom 7,5 kW Chain feed, motor 3 kW Pneumaticaly loaded feedrollers 5 cutterblocks with throw-away knives

Category: 707: catering machines
New in: used
Price: request quote
Location: Land-de DE 51107 Köln, Porzer Str. 70 B
Seller: AY-BACK Technik Bäckerei & Gastronomiemaschinen

Gas cooker 6 burner with 2 ovens stainless steel city gas and Grill plate 380 V used Cook combination for gastronomy Gas stove with 2 ovens 6 cooking flame, different size each plate can be separately adjusted. Backsplash rear 3 gas burners Ã? approx. 11 cm 3 gas burners ø 9 cm 2 ovens with a total of 3 racks left Grill plate with 3seitiger back splash: approx. 36 x 49 cm (W x D) Upstands are about + 6.5 cm high and beveled on both sides forward. Under the grill plate is on the left side collect a fat tray. Can out very moved and easily cleaned werdebn. Bottom shelf without splashback approx. 32 x 77 x 40 cm (W x D x H) The grill is operated with 380 ...

Category: 203: planing machines
New in: 1996
Price: request quote
Location: Land-be BE
Seller: Vebim

Capacity: 230 x 130 mm. Spindles: 8 Bottom 5,5 kW, fence 5,5 kW, near 5,5 kW, fence 7,5 kW, top 5,5 kW, bottom 11 kW, top 5,5 kW, bottom 5,5 kW Spindle diameter: 50 mm. 4 driven rollers in table Feed: 6 - 36 m/min, motor 5,5 kW

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-de DE 51107 Köln, Porzer Str. 70 B
Seller: AY-BACK Technik Bäckerei & Gastronomiemaschinen

REGO SM 3 automatic Stop machine / mixer used   Stainless steel boiler, adjustable in height Timer 30 minutes Automatic can be switched off Speed infinitely adjustable Emergency off switch Accessories: 2 whisk 1 dough hook 2 stainless steel boiler for termination and the stirring of technical data: Manufacturer: REGO - machine factory model: SM 3 1.5 PS 220 / 380 Amp: 5.2 / 3.0   Dimensions: Width: 51 cm Depth: 58 cm Height: 159 cm Dimensions boiler 1: Height: approx 35 cm Ã? approx. 35 cm;  Dimensions of boiler 2: Height: approx. 21 cm Ã? CA. 37 cm round bottom The machine is cleaned, check ...

Category: 206: presses
New in: 1982
Price: request quote
Location: Land-be BE
Seller: Vebim

Line consisting of: Top/bottom glue spreader Disc conveyor capacity 1400 mm Throughfeed press with platen size 1400 x 4400 mm platen thickness 38 mm Specific pressure on 80% of the surface: ca. 5 kg/cm2 downstroke rams 8 x diam 110 mm water heating (boiler not included) outfeed belt 5500 mm

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-de DE 51107 Köln, Porzer Str. 70 B
Seller: AY-BACK Technik Bäckerei & Gastronomiemaschinen

REGO SM 2 automatic Stop machine / mixer used   Stainless steel boiler, adjustable in height Timer 60 minutes Automatic can be switched off Speed infinitely adjustable Emergency off switch Accessories: 2 whisk 2 stainless steel boiler for termination and the stirring of technical data: Manufacturer: REGO - machine factory model: SM 2 Series Nr 70 / 4 1.5 Volts: 220 / 380 Amp: 4.0 / 2.3   Dimensions: Width: 42 cm Depth: 48 cm Height: 138 cm Dimensions boiler 1: Height: approx 32 cm Ã? approx. 33 cm;  Dimensions of boiler 2: Height: 32 cm Ã? 19 cm round bottom The machine is cleaned, checked fo ...

Category: 206: presses
New in: 1992
Price: request quote
Location: Land-be BE
Seller: Vebim

Line consisting of: Destacker Bargstedt Cleaning brush Bürkle Top/bottom glue spreader Bürkle Glue mixing station Oest Disc conveyor infeed belt, preparation table Throughfeed press with platen size 1400 x 5800 mm Press platen thickness: 100 mm Press opening 150 mm Specific pressure on 80% of the surface: ca. 6 kg/cm2 downstroke rams 12 x diam 125 mm Thermic oil heating (boiler not included) Max working temperature 140°C outfeed belt Destacker Bürkle

Category: 841: paper converting: carton gluers
New in: 1996
Price: request quote
Location: Land-pl PL 30199 Krakow, Strugi 18
Seller: TOP GRAPHIC MACHINERY

Semi - automatic folder gluer Andrew & Suter Multinova 1600 ref 2139EU Year - 1996 Straight line lock bottom

Category: 205: boring mills, machining centers
New in: 1991
Price: request quote
Location: Land-be BE
Seller: Vebim

Equipment: Machine prepared to take 2 horizontal units at later date 6 x bottom unit with 3 motors 1,5 kW 9 13-spindle drilling blocks, centers 32 mm, 2 11-spindle drilling blocks, centers 32 mm, vertical blocks swivelling 360° Min/max motor centerdistance: 160 - 544 mm Min drilling unit center distance: 192 mm 1010 mm long infeed conveyor belts at machine infeed Preselection for automatic cycles Panel sizes, length 250 up to 3000 mm, width 200 up to 800 mm, thickness 12 up to 40 mm

Category: 841: paper converting: carton gluers
New in: 2009
Price: request quote
Location: Land-pl PL 30199 Krakow, Strugi 18
Seller: TOP GRAPHIC MACHINERY

Folder gluer Bobst Expertfold 110 A2 ref 2140EU Year - 2009 Max width - 1100 mm Accufeed feeder Prefold Straight line glueing Lock bottom CUBE system

Category: 205: boring mills, machining centers
New in: 1997
Price: request quote
Location: Land-be BE
Seller: Vebim

working width: 260 - 3090 mm workpiece thickness: 10 - 70 mm digital positionning width Drilling: 2 bottom units, split heads dowelinserting: 1+1 Dowelmagazine with shaker and 5 exits 1+1 Separator for 5 dowels 5+5 Glue guns with dowel inserter

Category: 201: saws
New in: used
Price: request quote
Location: Land-pl PL 83-33 Miechucino, Mojusz 51a
Seller: StanDrew

-made in Germany -the original documentation on DTR -very good condition TECHNICAL PARAMETERS: -max cutting height 170 mm -min length of a single element to be administered to cut 740 -max cutting width 350 mm -max distance from the Guide to track measure 380 mm -max blade diameter 450 mm -80 mm sleeve diameter -spindle diameter saw blade 60 mm -bottom bracket drive motor power of vertical shaft set 0, 75kW -the power of the main engine 55 kW -feeding motor power 4kW -adjustable feed rate on the inverter 4-24 m/min -the working surface of the table 1910x790mm -table height from the base of the 820mm -dimensions length/width/height 4460/1780/1870mm -weight 35 ...

Category: 205: boring mills, machining centers
New in: 1995
Price: request quote
Location: Land-be BE
Seller: Vebim

4 bottom units, split heads, each with 9 spindles, 32 mm centers 2 side units manual setting with digital read-out Quick-release chucks

Category: 203: planing machines
New in: used
Price: request quote
Location: Land-pl PL 83-33 Miechucino, Mojusz 51a
Seller: StanDrew

-Machine in stock -After reviewing the technical -Prepared to work -YEAR of PRODUCTION 1997 TECHNICAL PARAMETERS: -Planing width 20-220 mm -Planing height 8-120 mm -For wood, WET -Spindle fi 40 mm -Threaded Spindle -rollers in the countertop before the first head -Feed smoothly adjustable on the geared motor 4-32 m/min – ELECTRIC HEIGHT ADJUSTMENT THE PLANING -Spindle brakes -MACHINE IS CONTROLLED FROM THE DESKTOP Spindle 5 pieces arranged: BOTTOM + RIGHT + LEFT + TOP + BOTTOM 1) horizontal spindle-7.5 kW 6000 RPM 2) Spindle vertical right-7.5 KW 6000 RPM 3) Spindle vertical left-7.5 kW 6000 RPM 4) Spindle horizontal top-7.5 kW 6000 RPM 5) lower horizonta ...

Category: 205: boring mills, machining centers
New in: 1992
Price: request quote
Location: Land-be BE
Seller: Vebim

Line has got 2 throughfeed drilling machines Weeke 1st drill Weeke BST30/25, N° 0-259-05-3283-01-0810, 1992 Equipment: 2 x hor. Units, split drilling blocks, each with motor 1,8 kW, 13-spindle drilling blocks, centers 32 mm 6 x bottom unit, split drilling blocks, each with 1,8 kW motor vertical blocks swivelling 360° Min/max motor centerdistance: 160 - 576 mm Min drilling unit center distance: 192 mm Preselection for automatic cycles Panel sizes, length 250 up to 2500 mm, width 200 up to 800 mm, thickness 12 up to 40 mm 2nd drill Weeke BST30/25, N° 0-259-05-3284, 1992 Equipment: Machine prepared to take 2 horizontal units at later date 6 x bottom unit, split drilling blocks, each with 1 ...

Category: 203: planing machines
New in: 2008
Price: request quote
Location: Land-pl PL 83-33 Miechucino, Mojusz 51a
Seller: StanDrew

-Machine in stock -After reviewing the technical -Prepared to work -YEAR of MANUFACTURE: 2008 -Planing width 20-230 mm -Planing height 8-150 mm -Spindle fi 40 mm -Threaded Spindle -Feed smoothly adjustable on the geared motor 4-32 m/min -AUTOMATIC HEIGHT ADJUSTMENT THE PLANING -AUTOMATICALLY ADJUSTABLE PLANING WIDTH -Spindle brakes -MACHINE IS CONTROLLED FROM THE DESKTOP Spindle 6 pieces arranged: BOTTOM + RIGHT + LEFT + TOP + TOP + BOTTOM 1) horizontal spindle-7.5 kW 6000 RPM 2) Spindle vertical right-8.6 KW 6000 RPM 3) Spindle vertical left-7.5 kW 6000 RPM 4) Spindle horizontal top-12.6 kW 6000 RPM 5) Spindle horizontal top-8.6 kW 6000 RPM 6) horiz ...

Category: 209: other wood working machines
New in: 1999
Price: request quote
Location: Land-be BE
Seller: Vebim

Edges: coil edges 0,4 - 3 mm Panel thickness: 6 - 45 mm Equipment: 1902 Edge magazine 1906 Holt melt unit with cartridges 1902 Lateral pressure rollers 1973 MF End trimming, motor 0,3 kW 1942M Multi-function top and bottom frims, motors 0,6 kW, tilting

Category: 203: planing machines
New in: 2010
Price: request quote
Location: Land-pl PL 83-33 Miechucino, Mojusz 51a
Seller: StanDrew

-machine in stock -After reviewing the technical -very good condition -year of manufacture 2010 TECHNICAL PARAMETERS: -working width 180 mm -working height 120 mm -spindle diameter 40 mm -spindle horizontal bottom 5.5 kW -vertical spindle right and left 7.5 kW – the spindle top 5.5 kW -the motor feed 1.1 kW -spindle RPM 6000 RPM -four top steel roller stretching -one upper rubber traction roll -two types of feed rate 6 12 -feeding table length 170 cm -the diameter of the nozzle 4 x 120 mm Overall dimensions of the machine: -length 300 cm width 140 cm -height 160 cm -weight 1300 kg

Category: 209: other wood working machines
New in: 2006
Price: request quote
Location: Land-be BE
Seller: Vebim

Single sided edge bander with hot melt, fixed side at the right, pre-milling unit Edge thickness: 0,4 to 3 mm Workpiece thickness: max 50 mm Min workpiece length 150 mm Feedspeed 22 m/min Workpiece transport by chain, top pressures with rubber rollers Sound enclosure over all trimming motors Equipment: Pre-milling with 2 shapers, motors 1,5kW Glue pot for both EVA and PUR glue Pressure zone with segmented pressure shoe End trims K3, motors 0,2kW, 0° and 3° tilting Rough trimming, motors 0,7kW Top/bottom radius trimming, tilting, automatic positioning, motors 0,3kW Postform trimming unit AKF, 2-axis cnc controlled, motors 0,35kW Radius scraping unit ZK Glue scrapers ZK-F Buffing unit (Retur ...

Category: 203: planing machines
New in: used
Price: request quote
Location: Land-pl PL 83-33 Miechucino, Mojusz 51a
Seller: StanDrew

-machine in stock -After reviewing the technical -very good condition -year of production 2000 TECHNICAL PARAMETERS: -working width 230 mm -working height 160 mm -chrome-plated tops -first bottom spindle, 7.5 kW -the second right spindle, 7.5 kW – the third left spindle, 7.5 kW -the fourth right spindle, 7.5 kW Fifth upper spindle 11 kW -Sixth lower spindle 11 kW -adjustable feed the wariatorze -feeding speed 6 – 32 m/min -automatic height adjustment -automatic control of the left head -the diameter of the spindle 40 mm -tool diameter 160 mm -three rolls in counter -eight steel upper rollers -the two upper rollers of rubber -a central lubrication system -f ...

Category: 209: other wood working machines
New in: 1999
Price: request quote
Location: Land-be BE
Seller: Vebim

Panel thickness: 12 - 60 mm Feed speed: 18 - 24 m/min Edge thickness: 0,4 - 3 mm for coil edges, 0,4 - 20 mm for strips / solid wood Equipment: Help carriage feeding the panels rectangular automatic fence at the infeed Squaring device: 2 x 3,0 KW Panel edge pre-heater Hot melt unit: QA34 / A20 edge magazine Lateral pressure rollers, thickness programmable, 1 driven, 6 non-driven rollers End trims HL83, programmable change straight/chamfer, 2 motors 0,5 kW Rough trimming: 2 x 1,5 KW Top/bottom fine trimming, tilting, 2 x 0,4 kW Contour trimming FK 13, 2 x 0,4 KW, with 8-fold toolchangers Universal milling motor 4kW Profile scrapers Flat scrapers Buffing unit with oscillation Controlls: HOMATI ...

Category: 203: planing machines
New in: used
Price: request quote
Location: Land-pl PL 83-33 Miechucino, Mojusz 51a
Seller: StanDrew

-machine in stock -After reviewing the technical -very good condition -for wood, wet -year of manufacture 1996 TECHNICAL PARAMETERS: -planing width 230 mm -planing height 160 mm -spindle diameter 50 mm -bottom spindle 11 kW – the spindle right 11 kW -spindle left 11 kW – the spindle height 18.5 kW -bottom spindle 15 kW -the last two spindle on podtrzymkach -four rolls of stretching in the countertop -six of the upper rollers pulling steel -three telescopic feed rollers -the two upper rollers pulling rubber -pneumatic profile knives jointer -6-60 feed speed m/min -cardan shafts feed -hydraulic feed -feed motor 11 kW -electrical height adjustment -h ...

Category: 209: other wood working machines
New in: used
Price: request quote
Location: Land-be BE
Seller: Vebim

Working width: 3200 mm Electronic setting of width Equipment: 1+1 scorer top 1+1 scorer bottom 1+1 hogger 1+1 jump shaper 6000 r/min 1+1 jump shaper 6000 r/min

Category: 203: planing machines
New in: used
Price: request quote
Location: Land-pl PL 83-33 Miechucino, Mojusz 51a
Seller: StanDrew

-machine in stock -After reviewing the technical -very good condition -year of production 1999 -ideal for the production of Windows TECHNICAL PARAMETERS: -planing width 230 mm -planing height 150 mm -pneumatic head jump right and top 50 mm -spindle lower 5.5 kW -left and right spindles 7.5 kW – the spindle top 5.5 kW -bottom spindle 4 kW -power undercutting 2.2 kW -unit with pneumatic doskokiem -spindle diameter 40 mm -spindle RPM 6000 -adjustable feed smoothly 3-32 m/min -feed motor 2.2 -four upper pinch rolls gear -the upper three rubber rollers pinch -Additional rolls for the strip shaft -rubber draw roller in the counter -electric control head top  ...

Category: 209: other wood working machines
New in: 1996
Price: request quote
Location: Land-be BE
Seller: Vebim

Panel feed with chain, feed speed 8 and 16 m/min Top pressures with rollers Coil edges 0,3 to 3 mm, strips 0,3 to 13 mm. Edges up to 66 mm height Panel thickness 6 to 60 mm (limited to max. 45 mm for the end trims) Equipment: 1906 Glueing unit with hot melt cartridges 1901 Edge magazine with guillotine for coil edges 1926 Pressure rollers, pneum. loaded, 1 driven, 3 non-driven rollers 1916MF End trims, front and rear, motors 0,45 kW, straight and chamfer 1942 Top and bottom frims, motors 0,6 kW, tilting 1942M Multi-function top and bottom frims, motors 0,6 kW, tilting 1944 Buffing with oscillation Sound enclosure

Category: 706: beverage machines
New in: used
Price: 194.000 €
Location: Land-de DE
Seller: MVRG UG (haftungsbeschränkt) & Co. KG

Can be filled: 1 l / 10.000 FL/h / wet glue labelling / 6s-carrier 0.5 l / 12,000 FL/h / wrap sleeve labelling / 6s-carrier / 12s trays 0,33 l / 12,000 FL/h wrap sleeve labelling / 12s trays PET line consisting of: (1) bottle task system, manufacturer POSIMAT type Depemat, consisting of: inlet roller conveyor, B 800 mm, L 7,000 mm, pallet lift, box location sampling system, vacuum lifters, stacking, euro pallet output magazine, transfer chute, stainless steel hopper, 1200 x 3,000 mm, Strand conveyors, transfer station Year of construction: 2002 (2) 1 x Belt conveying system, comprising: belt conveyor table 1200 x 3,000 mm, belt conveyors, belt width 400 mm, L 7,000 mm, bel ...

Category: 209: other wood working machines
New in: 2013
Price: request quote
Location: Land-be BE
Seller: Vebim

Edges up to 3 mm from coil, 6 mm strips Workpiece width min: When Workpiece thickness 12-22mm 70 mm When Workpiece thickness23-40 mm, 120 mm When Workpiece thicknesse 41-60mm 150 mm in relation to workpiece length Feed speed 11 m/min Equipment: Pre-Milling 2 X 2,2 KW Pre-heating of panel edge Glue aggregate A6 Coil edge magazine Pressure zone, central positioning End trims, chamfer 15°/straight, 2 X 0,18 KW, 12.000 rpm, electro-pneumatic setting central control Top & Bottom trimmng, 2 X 0,27 KW, automatic adjustment when switching from straight to angle Corner rounding unit 1 X 0,35 KW, 12000 rpm, max. 3 mm edge thickness, workpiece thisckness: max. 40 mm, feedspeed 11 m/min., min workpiece ...

Category: 401: filling machines
New in: 2003
Price: request quote
Location: Land-tr TR 43100 Kutahya, Adnan Menderes Bulv. Balikli Mah.Hicret sk.P.Hamit
Seller: Ozbek Machinery Trade

TBA3/1000ml machine Year 2003 Capacity : 3400Kg/h standart Dimensions : 3,30m x1,60m x4,50m from above Photos at the attahed document

Category: 204: grinding machines
New in: 2008
Price: request quote
Location: Land-be BE
Seller: Vebim

Profile width: 25 to 230mm Max profile height: 100mm Equiped with 10 sanding brushes, each with motor 0.37kW, speed adjustable by freq.converter 750 to 1500 r/min Positioning of the brushes: 1 and 2: top 3 to 5: right 6 to 8: left 9 and 10: bottom Feed by motor 0,37 kW Total power installed: 2,17 kW

Category: 706: beverage machines
New in: used
Price: request quote
Location: Land-de DE 49626 Bippen-Ohrte, Quakenbrücker Str. 13-15
Seller: Ohrter Getränkemaschinen Handel

KHS Innoclean Bottle cleaning machine for glass bottles 40,000 bottles / h available by 2020

Category: 108: welding machines
New in: used
Price: request quote
Location: Velen-Ramsdorf (46342)
Seller: WMT GmbH & Co. KG

table length: 2400 mm table width: 1200 mm table height: 900 mm weight of the machine ca.: 0,64 t dimensions: 2,4 x 1,2 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed steel S355 JR The surface is untreated. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional

Category: 706: beverage machines
New in: used
Price: request quote
Location: Land-de DE 49626 Bippen-Ohrte, Quakenbrücker Str. 13-15
Seller: Ohrter Getränkemaschinen Handel

KHS Innofill DMG VVF 84/18 KK 50,000 bottles / h Siemens S7 control available spring 2020

Category: 108: welding machines
New in: used
Price: request quote
Location: Velen-Ramsdorf (46342)
Seller: WMT GmbH & Co. KG

table length: 2000 mm table width: 1000 mm table height: 900 mm weight of the machine ca.: 0,45 t dimensions: 2,0 x 1,0 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed steel S355 JR The surface is untreated. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional

Category: 705: pharmaceuticals and cosmetics machines
New in: 1997
Price: 25.000 GBP
Location: Land-uk UK CH6 5 Flint, Flintshire, Unit 5, Ashmount Industrial Centre, Castle Park Industrial Estate
Seller: Lex Machinery Ltd

Nauta conical screw mixer designed for batch mixing of segregative, free-flowing powders, pastes and thick liquids. Working volume on liquids: 2,000 litre. Working volume on solids: 1700 litre. Suitable for a wide range of processing activities including: moistening of powders, coating, granulation, drying by means of heat input at atmospheric conditions or in combination with vacuum and possible liquid recovery, coating of solids with liquids (with intensifier). Especially suited for delicate products and processes where very accurate results are required and is synonymous with gentle mixing of large volumes. The screw has an average speed of 70 rpm whilst the arm rotates at 1 to 2 rpm deli ...

Category: 106: presses
New in: 2005
Price: request quote
Location: ab Standort
Seller: Frech GmbH

pressure: 130 t chamfer lenght: 3050 mm distance between columns: mm stroke: 215 mm operating pressure: 340 bar Control: total power requirement: kW weight of the machine ca.: 12 t dimensions of the machine ca.: 3,70 x 2,40 x 2,50 m - controlled axes: Y1, Y2, X, R, Z1, Z2 - Sliding support slidable - CNC controlled crowning - controlled backgauge - hydraulic tool clamping top and bottom - Pneumatic matrix displacement - Safety light curtain Lazersafe (removable) - 2D graphics control Delem - Without tools

Category: 705: pharmaceuticals and cosmetics machines
New in: used
Price: 15.500 GBP
Location: Land-uk UK CH6 5 Flint, Flintshire, Unit 5, Ashmount Industrial Centre, Castle Park Industrial Estate
Seller: Lex Machinery Ltd

Swiftpack Swiftcount SPC12P tablet/capsule counter. Automatic 12 track counter for packaging of tablets, caplets or soft/hard capsules. Speeds of 10 to 60 containers per minute, depending on materials and application. Tablet diameter range: 2.5mm to 22mm (can go up to 25mm with correct tooling). Container size range: 25mm to 100mm diameter x 40mm to 200mm high (with correct change parts). 316 Stainless Steel contact parts. Microprocessor controls eliminate miscounts, with count, batch size, bottle indexing, product scan time, pre-count and speed set back memorized for instant recall on up to 100 products. Product feed hopper. Integrated control panel. Primary and secondary feed vibrators. Di ...

Category: 109: other metal working machines
New in: 2000
Price: used machinery auction RESALE 70 €
Location: Land-de DE Germany, 76316 Malsch
Seller: Surplex GmbH

Weight approx.: 650 kg Dimensions (l x w x h) approx.: 0 x 0 x 0 mm Description: - Manufacturer: unknown - Type: unknown - Diameter bottom: 800 mm - Diameter top: 460 mm - Table bore: 200 mm - Height: 550 mm - Control: conventional Clamping pot for hobbing machine

Category: 402: packing machines
New in: used
Price: 1.950 GBP
Location: Land-uk UK CH6 5 Flint, Flintshire, Unit 5, Ashmount Industrial Centre, Castle Park Industrial Estate
Seller: Lex Machinery Ltd

3M-Matic 12AF-2, type 59300 case sealer capable of sealing between 10 and 20 boxes per minute, depending on box size and application. Adjustable for case height and width. Top and bottom belt drive for positive box conveying. Maximum box dimensions: length 600mm x width 550mm x height 520mm. Minimum box dimensions: length 150mm x width 100mm x height 150mm. Through roller conveyor: width 550mm x length 1400mm. 16-gauge welded steel frame and epoxy paint finish. Power supply 380V, 50Hz, 1.4 Amp, 240 Watts. Machine size: 1500mm x 1100mm x 600mm high, approx. weight 100kg. CHECKED/TESTED/RUNNING

Category: 1900: general inventory
New in: 2008
Price: used machinery auction RESALE 1.370 €
Location: Land-it IT Italy, 25011 Zona Industriale di Calcinato
Seller: Surplex GmbH

Weight approx.: 400 kg Dimensions (l x w x h) approx.: 1200 x 800 x 1200 mm Description: .

Category: 402: packing machines
New in: 1991
Price: 8.500 GBP
Location: Land-uk UK CH6 5 Flint, Flintshire, Unit 5, Ashmount Industrial Centre, Castle Park Industrial Estate
Seller: Lex Machinery Ltd

Fleximatic 5000 bottle unscrambler with hopper and infeed elevator. Fully automatic with 6 lanes designed for square and round bottles. Output speeds of 40 to 80 bottles per minute depending on bottle size and machine set up. Maxium bottle size 275ml. Outfeed conveyor. 3ph, 220/380V, 0.75kW. Max 6 bar air pressure. Machine sizes: unscrambler 1600mm x 1200mm x 2050mm high, approx. weight 250kg, hopper including infeed conveyor 1450mm x 1200mm x 1880mm high, approx. weight 150kg

Category: 109: other metal working machines
New in: 2000
Price: used machinery auction RESALE 70 €
Location: Land-de DE Germany, 76316 Malsch
Seller: Surplex GmbH

Weight approx.: 650 kg Dimensions (l x w x h) approx.: 0 x 0 x 0 mm Description: - Manufacturer: unknown - Type: unknown - Diameter bottom: 550 mm - Diameter top: 350 mm - Table bore: 125 mm - Height: 550 mm - Control: conventional Clamping pot for hobbing machine

Category: 403: labeling machines
New in: used
Price: 7.000 GBP
Location: Land-uk UK CH6 5 Flint, Flintshire, Unit 5, Ashmount Industrial Centre, Castle Park Industrial Estate
Seller: Lex Machinery Ltd

Pack Leader Pro-515 automatic wrap around labeller for various diameter/ length round bottles. Built in control panel with cross memory module to record best label setting methods which boost productivity and speed up changeover process; labelling delay function; labelling quantity count function; production pre-set function; miss label set and built in trouble shooter. Hand wheel mechanism to suit various product sizes and labelling positions with label gapping system. High beam for handling tall bottles with high labels (machine currently set up to 160mm label height). Allen hot foil coder. Dispensing speed: 40m/min max; conveyor speed: 22m/min max (customizing optional); applicator height ...

Category: 109: other metal working machines
New in: 2000
Price: used machinery auction RESALE 70 €
Location: Land-de DE Germany, 76316 Malsch
Seller: Surplex GmbH

Weight approx.: 650 kg Dimensions (l x w x h) approx.: 0 x 0 x 0 mm Description: - Manufacturer: unknown - Type: unknown - Diameter bottom: 700 mm - Diameter top: 580 mm - Table bore: 250 mm - Height: 550 mm - Control: conventional Clamping pot for hobbing machine

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)