We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,097 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Metrics: Total length : 4600 mm Upper band length: 2800 mm Belt width: 900 mm Equipment: own drive, press pressure adjustment with pneumatic cylinder ( 3 pressure zones, separately adjustable) on heavy-duty rollers for lateral Displacement, cutting alignment with 2 driven belt stations, middle press belt with guide rollers
used
CA 1962 Rotation slot - and die-cutting machine, strength of cardboard: 0,5-4 mm, thickness of the corrugated board: 3-7 mm, capacity (speed): until 3600 single cuts per hour, slots and booklet edge at side performed in a single pass, soil or cover can in one Operation individually, and with Zentralo cut twice, produced, additional delivery one cutting and creasing device can corrugated cardboard in a single punched, slotted, and grooved in one direction and cropped, automatic Waste ejection device, line 5301, Max: 1300x1200mm, min: 250 mm, 3600/hours
used
on request
used
Manufacturer: Bobst Model: IRT.II. It is a rebuilt 2-color letterpress printing machine that uses flexographic clichés "I'm not going to be Year: 1966 Serial no. 5305 Automatic feeder Cliché execution: - Thickness: 4.75 mm, details without the thickness / thickness of the cliché adhesive tape - default: 2% Solid board and corrugated board Cardboard thickness maximum: 65 mm Minimum sheet format: 100 x 300 mm Sheet format maximum: 1,050 x 1,600 mm Working speed maximum 3,200 sheets / hour Manuals (English) available Hints: Colors: We haven't bought any more colors in a while. Inks for letterpress printing are not allowed dry oxidatively. (This should use inks from offset printing, in which the dry matter is omitted, so work, such as B. the low-migration MGA inks.) The machine still works, but prints with a large offset of approx. 1 cm in all directions. So it can o ...
used
Format range: 1450 mm, min. 290 mm Equipment: Longitudinal seam, folding bottom, double edge, 4 point bonding, electronic Upper glue unit HHS 16 channel with 2x 4 and 2x 2 application heads, High-pressure pump, vibrator & dental gauge on the feeder, Pre-crusher left, kicker, counter, 2x pneumatically ascendable Accessory holders, additional folding floor module with press, additional means transport in folding, pressing rollers after folding, fully automatic format adjustment, 2x alignment to the press belt, UV marking device, video surveillance on the press belt, pneumatic, clocked press belt. Overhaul 2022: cleaned, tested, painted and equipped with new feeder and transport belts. Other: Machine can be visited by arrangement while running.
used
Min. size 350 x 500 mm / 920 x 1260 mm Speed of 5,000 c / h Quick clamping system in the stripping station Paper 80 g / m2 Cardboard max 2000 g / m2 16 heating zones Temperature 50 ° to 160 ° Autoplaten concept Stripping
used
recently refurbished by Bobst, more details on request
used
Bobst SP 142 ER Year 1981 Max.Size: 1420x1020mm Min.Size: 700500mm Max Speed: 6000sh/h Max. cutting force: 600T center line Without blanking – only separating possible.
used
Format range: max. 1000 mm, min. 126 mm Equipment: Longitudinal seam, folding bottom, double edge, electronic top gluing unit HHS X-tend, 4 channel with 2 application heads, Disc gluing unit left, feeder with vibrator, folding floor module A2 Primary crusher right and left, kicker, counter, Bobst CUBE control, additional middle transport at the top/bottom in folding, cutting alignment on the press belt, pneumatic, intermittent press belt. Overhaul 2023: cleaned, tested, painted and fitted with new feeders and Transport belts, as well as equipped with new press belts. Other: The machine can be viewed while running by appointment.
used
Bobst SP 142 E year: 1978 Max speed: 6500 sh/h Max Size: 1020x1420mm Minimum Size: 500x700mm
used
Bobst SP 142 E,, Year 1978, Max.Size: 1420x1020 mm, Min.Size: 700 x 500 mm, Max.cutting force: 600 T, Feeder: Non-Stop, Centerline, Quicklocksystem, Location in Germany
used
Reference ID: PP-35237 Category Folder Gluer Manufacturer Bobst Model E-Fold-1100 Elite Year Built 2021 Condition Very Good Location Europe Availability December 2023 Machine Description Crash-lock bottom boxes Straight-Line boxes 4/6 corner boxes Card board:200-800 g/m² Corrugated board:N/E/F Flute Belt Speed:320 m/min (420 m/min as optional) Jogging Speed: 20 m/min Strong and steady construction to improve running conditions; Modular design for easy adaptation to accommodate various boxes from food, pharma to cosmetic, electronics and so on; New HMI with icon design for easy communication ; Wired for connection with other equipment including smart logistic, electronic gluing, inspection system and so on; Equipped with high speed electronic counting device for accurate box count; Special B-Type lower glue pot for easy maintenance and glue wheel exchange; Smart ...
used
2 Side Rotary creasing and slotting Machine, series 69175/60, Max: 1300mm, Min: 135x80mm, 100m./minute
used
Format range: 680 mm, min. 126 mm Equipment: Longitudinal seam, folding bottom, double edge, electronic upper glue HHS, 4 channels with 2 application heads, disc gluing unit on the left, Bobst CUBE control, vibrator, pre-crusher right and left, Kicker, counters, digital position indicators, additional means transport up / down in the folding station, folding floor module, pneumatic, clocked press belt. Overhaul 2021: cleaned, tested, painted, new feeder and transport belts.
used
(series 5310) 2 Side Rotary creasing and slotting Machine, Max: 1300mm, Min: 135x80mm, 100m./minute Year: ca. 1961
used
Format range: 720 mm, min. 126 mm Equipment: Longitudinal seam, folding bottom, double edge, electronic upper glue with 2 application heads, disc glue on the left, Bobst CUBE control, vibrator & dental gauge on the feeder, Pre-crusher right and left, kicker, counter, digital position indicators, Folding floor module A2 with additional means transport above / below, additional means transport at the top / bottom of the fold, pneumatic Press belt. Overhaul 2022: cleaned, tested, painted, new Feeder and transport belts. Other: Machine can be visited by arrangement while running.
used
Format range: 720 mm, min. 126 mm Equipment: Longitudinal seam, disc glue on the left, Vibrator & dental apprenticeship on the feeder, pre-crusher right and left, Kicker, counter, fully automatic format setting with Program memory, pneumatic, clocked press belt. Overhaul 2022: cleaned, tested, painted and equipped with new Feeder and transport belts equipped. Other: Machine can be visited by arrangement while running.
used
Details Name Bost SP 142-ER ID PP-28816 Category Flatbed The Cutters Manufacturer Bobst Model SP 142-ER Year 1979 Speed 6000 sheets/h size 1420x1020 mm Min. Size 700x500 mm Condition Good Location Europe Availability Immediately Description • Double stripping • Cutting force 600 t • Working hours: 53000
used
Format range: 480 mm min. 56 mm Equipment: Longitudinal seam, folding floor, double edge, electronic gluing unit HHS, 4 channel with 2 application heads, pane under-gluing unit left, Bobst CUBE control, vibrator, primary crusher right and left, Kicker, counter, minimal folding device, pneumatic, clocked Pressing tape. Overhaul 2023: cleaned, tested, new investor and Transport belts.
used
Year: 1974 General refurbishment: 2017 Electrical connection: 25 kVA Main engine power: 15 kW Machine weight: 10t Max speed: 400 m/min Min speed: 20 m/min Optimum speed: 250 m/min Max dimension: 1300 mm Min dimension: 130 mm Max thickness of folded box: 8mm Point of glue: 1-3 Gluing: cardboard 280-800g, B, E and F flute
used
Manufacturer Bobst Model Domino 110-M Year 1984 max paper lenght 110 cm Machine is in production
used
Format Range: max. 1000 mm min. 126 mm Equipment: Longitudinal seam, folding bottom, double edge, 4-point gluing, electronic gluing unit HHS, 8 channel with 2 application heads, Disc gluing unit left, new electronic overhaul folding with servo motors, 4-point control with touch screen and Order memory, feeder with vibrator & dentistry, Folding floor module A2 with central transport, primary crusher right and left, Kicker, counter, Bobst CUBE control, digital position indicators, pneumatic, clocked press belt. Overhaul 2024: cleaned, tested, painted and equipped with new and conveyor belts. Other: The machine can be viewed while it is running by arrangement.
used
Bobst SP 1650 E Max.Size: 11501650mm Min.Size: 570850mm Max Speed: 4500sh/h Year 1970 In good production condition.
used
Bobst SP 130 E Year 1985 Max.Size: 920x1300mm Min.Size: 450x580mm Max Speed: 7000sh/h Max. Cutting force: 500T center line Immediately available.
used
Bobet Materiel boot cleaning station, type: L.B.M 92 E, serial number: 1255, year of construction: 2006, 400 V, 3 Ph, 50 Hz, brush length: 360 mm, total dimensions: 1450 mm x 720 mm x 1350 mm.
used
Format max: 92 x 130 cm Format min: 45 x 58 cm max. machine speed 7000 sheets/hour max. pressure 500 tons apporx. 60 cm raised - pull guide at the left side - setting frame - cutting plate - diverse pins and bars
used
Max. punching force: 400t, output: 6000 sheets/h, format: 600x520-1600x1100mm, including Feeder Easyloader, Panel Seperator Pallmac and documentation, without spare parts, the machine can only used outside the EU.
used
min./max. format: 700mm x 500mm/1420mm x 1020mm, throughput: 4500 sheets/h, max. punching force: 600t. Working materials: paper from 90 g/m2, cardboard up to 1.5mm thick, corrugated cardboard up to 4 mm thick. Dimensions X/Y/: 9900mm/2350mm, weight: 25500kg. Documentation available. On-site inspection is possible.
used
Name Bobst Omega 1600 ID PP-31247 Category Folder Gluer Manufacturer Bobst Model Omega 1600 Year 1982 Size 1600 mm Min. Size 314 mm Condition Good Location Europe Availability April 2023 Description • Glue type HHS cold glue with 3 nozzles • Cardboard thicknesses: EB, BC, C, B, EE, E • Longitudinal seam • Types of boxes that can be made 4 corners, 6 corners, junction, self-supporting bottom, reinforced self-supporting bottom
used
Bobbio CNC 502 spring coiling
used
BTS 200 spring coiling machine + AB1 decoiler cap wire diameter: 0,4 gt; 1,5 mm winding diameter: max 40 mm 18 gt; 445 pieces/min power: 1,5 kW length: 990 mm width: 1000 mm height: 1600 mm weight: 610 kg nbsp; extension springs - compression springs - conical springs - biconicalsprings with winding on the right or on the left
used
BTO 236 spring coiling machine + AB1 decoiler cap wire diameter: 1 gt; 3 mm winding diameter: max 70 mm max spring length: 180 mm max length of leg: 80 mm speed: 80 m/min power: min 9 kW / max 13,4 kW length: 1500 mm width: 1100 mm height: 1500 mm weight: 1300 kg
used
BX 400 spring coiling machine + AB2 decoiler cap wire diameter: 0,8 gt; 4 mm winding diameter: max 70 mm speed: 180 m/min (max 90 pieces/min) power: 6 kW length: 1400 mm width: 1350 mm height: 1900 mm weight: 2200 kg nbsp; extension springs - compression springs - conical springs - biconicalsprings with winding on the right or on the left
used
BTO 215 spring coiling machine + AB1 decoiler cap wire diameter: 0,2 gt; 1,5 mm winding diameter: max 45 mm max spring length: 100 mm max length of leg: 60 mm speed: 80 m/min power: min 3 kW / max 5,2 kW length: 1300 mm width: 900 mm height: 1300 mm weight: 620 kg
used
Year of construction 2017, 44.3 kw, 3145 h, with Winkelbauer snapit quick changer, 140 cm slope bucket, leveling blade, 8600 kg own weight
used
GIDUE COMBAT 370 Year 2005 8 colors BST web edge control Kelva web cleaning 8x flexographic printing unit with IST Metz UV drying system (7DW + 1DW retrofitted) Cooled chill rolls (without cooling system) turning cross Delam/Relam Cold foil 3 punching units, 1x Kocher & Beck Gap Master BST PowerScope 3000 registration camera Register control Sensotec Small roll rewinder Arsoma TR450 with 76mm + 40mm pusher Printing Cylinder x 8 96", 104", 160", 176", 136", 192", 190" Magnetic Cylinder 96", 104", 160", 176", 136"
used
Type Of Laminator: Solvent and Solventless // Working Width: 1325 mm
used
Format Range: max. 800 x 800 mm Equipment: Corrugated box packaging machine for longitudinal seam, 4+6 dot boxes, stack height max. 360 mm, stacking chute, pneumatic parcel removal, new main drive motor, new Siemens control system, new electrics / electronics. Other: The machine can be viewed while it is running, by arrangement.
used
Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor -Manufacturer: Bobolowski, servo motor -Type: HTBL-S 070/035-3SPE-2-1111-C -Voltage: 700V -Shaft: Ø 14 x 25 mm -Techn. Data: see photo type plate -Number: 2x servomotors available -Price per piece -Dimensions: 140/70/H120 mm -Weight: 2.1 kg/pc.
used
Format Range: max. 480 mm min. 56 mm Equipment: Longitudinal seam, disc glue on the left with glue, Bobst CUBE control, vibrator, primary crusher right and left, Kicker, Counter, Minimal Folding Device, Pneumatic, Cycled Press tape. Overhaul 2023: cleaned, checked, painted, new feeder and transport belts. Other: The machine can be viewed while it is running by arrangement.
used
Full revised in 2023 100 cm 3 point glueing NORDSON” Cold Glueing System "ERO" Glueing System 2023 (optional) KQ” Glueing System 2023 (optional) With standart equipments Regularly maintained by Bobst It is completely overhauled in 2020 It is completely cleaned and painted It is in perfect condition Available immediately
used
With chases and frames 92 x 126 cm In a good condition Can be seen in our warehouse in Istanbul Immediately Available
used
Hot Foil Stamping Machine Carton board min: 80 gr Carton board max: 800 gr Corrugated board max: 2 mm Sheet size min: 29,5x35 cm Sheet size max: 78x108 cm Speed max: 4000 s/h Stamping speed max: 4000 s/h Stamping & embossing size max: 78x108 (Longitudinal) Stamping & embossing size max. 78x108 (Transversal) Die cutting size max: 78x108 Temperature max 180 ºC Foll length: 1000 meter Longitudinal: Web width advance shafts: 72 cm Transverse: Web width advance shafts 102 cm Max. pile height (feeder unit): 120 cm Max. pile height (delivery unit): 120 cm It is in very good condition Available immediately
used
Convertible stock EXPERTCUT 1.6 | 1.6 PR Corrugated board 0.75 - 9 mm .03 - .35 in Corrugated flute types A, B, C, D, E, F, G, N, O, AB, AC, BC, EB, EF, Triple wall Batch height Feeder, min. 20 mm 0.78 in Feeder, max. depending on board quality and weight Delivery, max. 300 mm 7.87 in Capability Sheet size, max. 1,600 x 1,100 mm 62.99 x 43.30 in Sheet size, min. 600 x 520 mm 23.62 x 20.47 in Sheet size, min. (with Accuracy Pack) 730 x 520 mm 27.56 x 20.47 in Production speed, up to 6,000 s/h 6,000 s/h Die-cutting With gripper margin, max. 1,600 x 1,075 mm 62.99 x 42.32 in Gripper margin (adjustable) 15 mm (+3/-4 mm) 0.59 in (+0.11/-0.15 in) Height of cutting rules 23.8 mm .93 in
used
BOBST SP 102 - SE year 1992 A Die Cutting machine of size 72 x 102 cm Equipped with : Max. sheet 720 x 1020 mm, Min. sheet format 350 x 400 mm Pressing force 2.5 MN (250 tones), NON Strop feeder and delivery Max. speed 7500 S/Hour, Quick lock system, Suction head feeder, Cutting section Stripping section. IN VERY Good Condition ! (No Air Compressor, machine was plug on a Air Central)
used
BOBST SP 76 BM FOILMASTER FROM 2004 – AUTOMATIC HOT FOIL STAMPING Manufacturer: Bobst S.A. Switzerland Type: SP 76 BM Year of production: 2004 Max. Sheet size: 760 x 560 mm Min. Sheet size: 300 x 260 mm Mechanical Max. Speed: 7000 Sheets /hour Embossing and die cutting Distance between front edge of sheet and embosing die: 14-22 mm Gripper Margin: 9-17 mm Force: Adjustable stamping up to: 1.6 MN Heatable Beam: Adjustable temperature: 50-160 °C Zones individually controlled: 12 Category: Die Cutter - Automatic
used
Fully automatic flatbed die-cutter, non-stop feeder, automatic introduction with large vacuum plate, double sheet cleaning station, platinum unit, turn die cutting frame, (batch delivery) non-stop delivery with belt, cutting force 300 TON, 4.500 speed/h, working with corrugated cardboard of thickness max. 9.5 mm, min. 0.8mm, The Machine Can Cut On Micro-corrugated Cardboard, Jobs Quick Change Device, Working With Compact Stock Of Thickness 1 mm And Beyond, Cutting Force 350 TON, Format: Max. 1055x1575mm, Min. 400x600mm, Standard Accessories
used
BOBST SP 103 – E Type: AUTOPLATINE SP 103-E Year: 1995 Sheet size max: 1030 x 720 mm Sheet size min: 400 x 350 mm Max. Punching with gripper edge drop 1030 x 705 mm Max. Cutting without gripper edge drop 1030 x 720 mm Coinage 1030 x 690 mm Gripper edge 9 – 17 mm Platen pressure max 2,5 (250) MN(t) Production speed 8000 B/Std. Min. Paper 80 – 90 g/m2 Max. Carton 2000 g/m2 Corrugated E B - max 4 mm The machine is in very good working condition / Like new Push lay opposite operator side Pull lay operator side Centerline
used
Series No: 96225/64, Straight Line, Crash Lock, 4 Gluing Points, Width unfold: Max: 880, Min: 45, Width fold: Max: 425, Min: 18, Lenght Unfold: Max: 900, Min: 60, Capacity: 0-300 m/min, Material: Corrugated Cardboard with Waves E and B, Cardboard, With Bobst Polyfoder, M-No. 390101, AGE: 1972, Standard Accessories
used
Bobst SP 130 E Year 1985 Max.Size: 920x1300 mm Min.Size: 450x580 mm Max.Speed: 7000 Sh/h Max. Cutting force: 500 T Centerline Immidiately available.