bag in box used for sale

Key data: 470 A, 550 , 60

Refurbished OPS Ingersoll Gantry 500 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, were completely replaced. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

turning diameter: 510 mm turning length: 1000 mm control: MAZATROL T PLUS total power requirement: 22-26 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tyristor amplifier Indramat from milling machine for controlling DC motors, incl. connection diagrams, transformers, transform 1 pc. 3 TRM 2 – G11 , for 3 axes, programming module TSS11/ 109, 144, 109 1 pc. 1 TRM 3 W23-W0 for 1 axle, TSS8 535-1 1 pcs. TRK 6 – 4U 380 , Tyristor Control Amplifier for Milling Motor, Programming Module TSS10-527 Price per piece: Euro 300,- 1 pc DC servo motor Indrumat, type: 2 G 1115 1 R-B3-3303 H2, speedometer TDC 2.6 H1 Price : Euro 400,-

Tyristor amplifier Indramat from milling machine for controlling DC motors, incl. connection diagrams, transformers, transform 1 pc. 3 TRM 2 – G11 , for 3 axes, programming module TSS11/ 109, 144, 109 1 pc. 1 TRM 3 W23-W0 for 1 axle, TSS8 535-1 1 pcs. TRK 6 – 4U 380 , Tyristor Control Amplifier for Milling Motor, Programming Module TSS10-527 Price per piece: Euro 300,- 1 pc DC servo motor Indrumat, type: 2 G 1115 1 R-B3-3303 H2, speedometer TDC 2.6 H1 Price : Euro 400,-

Tyristor amplifier Indramat from milling machine for controlling DC motors, incl. connection diagrams, transformers, transform 1 pc. 3 TRM 2 – G11 , for 3 axes, programming module TSS11/ 109, 144, 109 1 pc. 1 TRM 3 W23-W0 for 1 axle, TSS8 535-1 1 pcs. TRK 6 – 4U 380 , Tyristor Control Amplifier for Milling Motor, Programming Module TSS10-527 Price per piece: Euro 400,- 1 pc DC servo motor Indrumat, type: 2 G 1115 1 R-B3-3303 H2, speedometer TDC 2.6 H1 Price : Euro 500,- 2 pcs permanent magnet DC servo motor, Indrumat, type: MDC 10.40C / MMA-0/ S06

Tyristor amplifier Indramat from milling machine for controlling DC motors, incl. connection diagrams, transformers, transform 1 pc. 3 TRM 2 – G11 , for 3 axes, programming module TSS11/ 109, 144, 109 1 pc. 1 TRM 3 W23-W0 for 1 axle, TSS8 535-1 1 pcs. TRK 6 – 4U 380 , Tyristor Control Amplifier for Milling Motor, Programming Module TSS10-527 Price per piece: Euro 400,- 1 pc DC servo motor Indrumat, type: 2 G 1115 1 R-B3-3303 H2, speedometer TDC 2.6 H1 Price : Euro 500,- 2 pcs permanent magnet DC servo motor, Indrumat, type: MDC 10.40C / MMA-0/ S06

7 pcs Index VD30 mounts with capto interface, 3 pcs driven by it, mint condition!

EDM machine Agie Agiectron Integral 2 BJ 1997

turning diameter: 500 mm turning length: 910 mm control: Mazatrol Smooth G axis stroke (X,Y,Z): 450/200/960 mm : 1436 mm rapid travel x/y/z: 40000 mm/min rapid travel W: 30 m/min Main spindle:: spindle turning speed range: 5000 U/min Motor output (40%ED): 11 KW capacity at 100%: 7,5 KW spindle bore: 76 mm bar material dia.: 65 mm spindle nose: A2/6 3-jaw chuck: Kitagawa BR08 milling spindle: turning speed range: 12000 U/min power capacity: 7,5 kW tool taper: Capto C6 tool change unit: numbers of positions in the tool changer: 36 max. tool diameter: 125 mm max. tool length: 210 mm max. tool weight: 5 kg 2nd Spindle:: Subspindle Power: 11 / 7,5 kW Subspindle - speed: 5000 U/min spindle bore: 61 mm spindle nose: A2/5 total power requirement: 51,1 kVA weight of the machine ca.: 9,5 t dimensions of the machine ca.: 3,8 x 2,5 x 2,5 m - CNC Control Smooth G - Main & Subspindle - ATC for 36  ...

control: SIEMENS - - -: - - - - - - - - -: - - - - - - CNC Turning- and Milling Center | INDEX - GU 600 The machine is in a well-maintained condition. Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: GU600 | GU-600 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: SIEMENS - - -: - - - - - - - - -: - - - - - - CNC Turning- and Milling Center | INDEX - GU 600 The machine is in a well-maintained condition. Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: GU600 | GU-600 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inoxmim 500L High shear mixing vessel 2020, Stainless mixing vessel, top mounted agitation with scrape surface, bottom mounted high shear mixer 7.5Kw, jacketed both steam and water, with digital temperature display and a Thermosiphon vessel, mobile, with PDF manuals, 3Ph

The Mazak INTEGREX 200-IV S is a multi-tasking CNC turning and milling center with a second/sub-spindle. The S” indicates the sub-spindle, allowing complete machining of both sides of a workpiece in a single setup. Typical specifications include a maximum machining diameter of approximately 660 mm, a machining length of around 995 mm, and X/Y/Z travels of approximately 580 / 160 / 1,045 mm. The machine features a B-axis milling head, a main spindle and sub-spindle up to approximately 5,000 rpm, and a milling spindle typically capable of 12,000 rpm. It normally uses Capto C6 tooling and is often equipped with a 40-position automatic tool changer. Machines manufactured around 2006–2010 are commonly equipped with the Mazatrol Matrix CNC control. The INTEGREX 200-IV S is designed for complete machining of complex components, combining turning, milling, drilling, tapping and 5-axis positi ...

- Multi-Tasking Machining in a Single Machine Setup - Sub spindle for overtaking with full C-Axis 0,001 Degrees - 5500 Cutting hours ! - The INTEGREX IV series can finish all machining processes. - High speed, advanced milling spindle that can tilt up to 240 degrees swiveling. - Lower turret with rotary tool spindle so livew tooling - Chip conveyor with coolant and 15 Bar iKZ - Double chuck KNCS-N 210-53 SMW Autoblock - MAZAK Flex -GL150F Gantry Loader - Gripping range 200 x 120 length x 15 Kg

CURRENTLY I can offer you this HM 4 Industry planer from Hundegger. FREE Dec. 26 The high-performance plane from Hundegger! A used HM 4 planing machine from HUNDEGGER HM-400 2008 with the entire mechanization to the left and right of the HM4 planing machine for 16 m of timber lengths, as shown in the photos. 4 x 11KW planing motors. 4 x bevel unit. Fully automatic cross-section measurement Sale as seen from site in assembled condition without warranty and guarantee, without dismantling. Price 69,000 euros net

Available from Dec.26, a used Hundegger K2 industry 650, built in 2020.. TOP as good as new... sale as seen without warranty and guarantee from location. Without dismantling more details on your request. Please include your name, address and email address in your request.

turning diameter: 700 mm turning length: 3074 mm control: Mazatrol Matrix Smooth X : 91 mm : JIS A2-11 : 4000 1/min spindle motor: 30 / 22 kW Positioning speed: 12000 1/min milling spindle drive: 24 / 22 kW : 845 mm : 430 mm : 3126 mm : -30 / +210 ° Feeds (X,z,u,w-axis): 360 ° : HSK 100 : 36 Rapid Travel X / Y / Z-Achse: 50 / 50 / 40 m/min tailstock quill taper MT: 5 total power requirement: 77,73 kVA weight of the machine ca.: 25,5 t dimensions of the machine ca.: 7,3 x 3,4 x 2,95 m - Mazatrol Smooth X CNC control - 5-axis lathe - 36-position tool changer - IKZ / spindle cooling - Standard tool set (HSK T100) included - C-axis 0.001° - Tailstock - Milling head with milling spindle speed of 12,000 rpm -- B-axis 240° (-30° / +210°) - Smw 5.1 fixed tailstock (range 85–350 mm) - Kitagawa 21 3-jaw chuck - Renishaw RMP60 wireless probe - Engraving function, thread cutting, thread star ...

Turning diameter: 920 mm Turning length: 6000 mm Control: Mazatrol Matrix Spindle bore diameter: 170 mm Spindle nose: A2-11 spindle motor: 45/37 kW spindle turning speed range: 35 - 1600 U/min Spindle nose sub spindle: Turning speed sub spindle: 35 - 1600 U/min Movement X-axis: 1025 mm Movement Y-axis: 650 mm Movement Z-axis: 6170 mm w-axis: 4816 mm B-Axis travel: +210 / -30 ° C-Axis indexing: 0,0001 ° Tool Taper: BT 50 Tools in tool magazine: 80 Milling head speed: 10000 1/min milling drive: 37 kW total power requirement: 120 kVA dimensions of the machine ca.: 13267 x 3,300 x 3,200 mm Total weight, approx.: 44 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stainless steel tanks Capacity 250 litres Cylindrical stainless steel tank standing on feet single-walled, hinged lid Agitator from above Dimensions: Diameter inside 63 cm Diameter outside 65 cm Cyl. Height 80 cm Outlet DN 40

M. No.: PD01900101 Equipment / Additional information: Ultimate pressure: 120 mbar

Top/bottom calibrating line: Bottom sander Number of sanding units: 4 1. Steel roller with motor 55 kW 2. Steel roller with motor 45 kW 3. Rubber roller with 90 Shore, motor 30 kW 4. Rubber roller with 90 Shore, motor 22 kW 5. Cleaning brush Variable Feed Speed Vacuum workpiece suction Top sander Number of sanding units: 4 1. Steel roller with motor 55 kW 2. Steel roller with motor 45 kW 3. Rubber roller with 90 Shore, motor 30 kW 4. Rubber roller with 90 Shore, motor 22 kW 5. Cleaning brush Variable Feed Speed Vacuum workpiece suction

Code: 0480 Brand: CASADEI INDUSTRIA Model: K 60 PM - CE Standard Automatic edge bander with trimming unit for panels, furniture, furnishings, kitchens, and various - Year 2024 - CE Standard Technical data: Min/max panel height 8–60 Edge thickness10 mm Min panel length 120 mm Min panel width 110 mm Panel feed speed 11 mt/min Panel support roller opening 500 mm Configuration: Infeed trimming unit : 2 diamond cutters diameter 60 mm 64 mm height - PLC-controlled work cycle - Adjustable material removal from 0 to 2 mm with digital display - HF motors, 200 Hz - 12000 rpm - 1,1 Kw each PLC-controlled logic operation - Full machine control - Electronic glue heating control - Automatic temperature standby Infrared lamp for preheating the panel after pre-milling Anti-adhesive liquid spray unit Glue tank - Tank capacity 2 kg - n° 7 electric heating elements Pressure rolle ...

X-axis: 525mm, Y-axis: 400mm, Z-axis: 450mm, Y-axis at electrode change and loading position: 675mm, internal dimensions of working tank: 750x650x420mm, max. dielectric level: 375mm, max. head load: 100kg, distance from tool carrier plate to worktable: 135-585mm, integrated C-axis speed, adjustable: 1-20rpm, measuring resolution: 0.001°, load capacity with manual electrode change: 50kg, load capacity with automatic electrode change: 15kg, support surface: 730x630mm, worktable load capacity: 1,000kg, connected load: 7kVA, fuse protection: 25A, length: 2900mm, width: 2200mm, height: 2653mm, machine weight: 4.4t, generator weight: 200kg, with documentation, C-axis, EW20 electrode changer, TAE M10 cooling unit, CO2 fire extinguishing system, 4µm filter system, locators, MultiProg software, an on-site inspection is possible.

Overview KHS Innofill NRF filling and closing monoblock for still wine in glass bottles, built in 2007. A 50-valve filler is followed by two 10-head closers: a KHS natural-cork closer with vacuum device and an aluminium roll-on capper by Zalkin, so the machine closes either corks or screw caps. Output 12,000 bottles per hour. The operator panel and software were updated by KHS in 2022. Technical data Manufacturer: KHS Model: Innofill NRF Year of manufacture: 2007 Output: 12,000 bottles/h Filler: 50 filling valves, pitch circle 1,800 mm, filling tube diameter 20 mm Cork closer: KHS, 10 heads, pitch circle 360 mm, electrically heated cork jaws, cork sorter mounted on top Vacuum device with vacuum pump Screw-cap closer: Zalkin aluminium roll-on capper, 10 heads, pitch circle 360 mm, for 31.4 x 24.2 mm aluminium caps Machine pitch 36π, running direction left to right Conveyor: stainless ste ...

Overview This KHS Innopack CA-1, built in 2006, is a carton erector that forms cartons from flat blanks and closes their bottom with hot-melt glue. Blank stacks are fed on a roller conveyor into the magazine; suction grippers pick each blank, erect it, fold the inner bottom flaps, apply glue with a Robatech hot-melt unit, close and press the outer flaps and discharge the carton onto the outfeed roller conveyor. The machine is still installed in a wine bottling and packaging line and can be inspected on site. Technical data Manufacturer: KHS Model: Innopack CA-1 Year of manufacture: 2006 Machine type: carton erector with bottom gluing Glue system: Robatech Concept hot-melt unit with glue nozzles for the bottom flaps Power supply: 400 V, 3 Ph, 50 Hz, 15 A Compressed air: min. 5 bar operating pressure Overall dimensions (L x W x H): 4,550 x 3,450 x 2,720 mm Blank infeed: roller conveyor wit ...

Overview This KHS Innopack SP, built in 2006, is a pick-and-place case packer for bottles. Empty cases run on the case conveyor into the packing zone, where they are stopped and centred; the gripper head picks the bottle formation from the four-lane infeed table and sets it into the cases. The lifting unit travels on a vertical lifting column with counterweight, and the motion is controlled by a KUKA KR C2 controller with KCP teach pendant. Four change-part trolleys with gripper heads for different bottle sizes are included. The packer is still installed in a wine bottling and packaging line and can be inspected on site. Technical data Manufacturer: KHS Model: Innopack SP Year of manufacture: 2006 Machine type: pick-and-place case packer Bottle infeed: 4 lanes, lane width 85 mm Gripper head: 2 x 18 bottle tulips, formation 3 x 6 bottles Case clearance: 175 x 400 mm Power supply packer: 4 ...

Overview This KHS Innopro warmer-cooler is a skid-mounted thermoregulator for wine, built in 2006 by KHS AG in Dortmund, Germany. It brings wine to a set temperature, heating or cooling as required, at up to 9,900 l/h (99 hl/h), designed for an outlet temperature of 18 °C. The core is a three-section Thermowave plate heat exchanger; stainless steel piping, pumps, pneumatically operated valves and instrumentation are mounted on one frame and run from a freestanding KHS stainless steel control cabinet with touch panel. The unit was last used in a wine bottling line. Technical data Manufacturer: KHS AG (Dortmund, Germany) Model: Innopro warmer-cooler Year of manufacture: 2006 (control cabinet 2007) Machine type: thermoregulator for heating or cooling wine, skid-mounted Product: wine Throughput: 9,900 l/h (99 hl/h) Cooling section: wine from 26 °C to 18 °C, cold water 10 °C to 14 °C at  ...

Used pick and place ” robot made by Pro Inzynier with a carton packaging machine. New 2022. Technical specifications: Power supply: 400 V, 50 Hz, 12 kW; Weight: 10,000 kg; Plastic conveyor belt; Conveyor belt width: 500 mm; passage dimensions: 530 mm x 120 mm; Overall dimensions: 3,250 mm x 7,700 mm x 2,550 mm.

Important note: the spindle was replaced in 2025 for approx. 40,000 EUR, therefore few spindle hours! The pallets are clamped on the rotary tilting table. Incl technical documentation and HSK-E 40 tool holders and three pallets. additional technical data: • rapid traverse: max. 30 m/min

With technical documentation as well as workbench and accessories such as HSK-E 40 tool holders, equipped with tools. Additional technical specifications: • Table T-slots quantity: 5 pcs • T-slots dimensions: 18H12 • Distance HSK holder - table: 550 mm • Feed drive X-, Y- and Z-axis: Traversing speed: 30 m/min • Dimensions of the workbench: approx. 1500 x 900 x 1100 mm

Plummer block housings, pillow block housings, pillow block housings, pillow block housing units, pillow block housing units, SKF pillow block housings, pillow block housing units -Plumb block bearing: bearing block, inner Ø 50 mm -Holes: 160 mm spacing x Ø18 mm -Quantity: 3 pillow block housings available - Price: per piece -Dimensions: 210/50/H170 mm -Weight: 3.3 kg/piece

2018 Italian Pack inline traysealer – pre-owned, Compact inline traysealer for fresh products., This 2018 Italian Pack traysealer seals trays with top film and is built as an inline machine with infeed and outfeed conveyor. It comes complete with a vacuum pump and several tool sets, and is suitable for MAP packaging depending on the configuration., Key features, - Inline version: infeed and outfeed conveyor with guards, ready to run in a packaging line, - Stainless steel construction: suited to hygienic food production environments, - PLC control with touchscreen: simple operation and programmable settings, - Automatic film feed: reel holder for top film above the sealing unit, - Vacuum pump fitted: suitable for MAP packaging, depending on the configuration, - Compact footprint: fits smaller production rooms as well, Tooling included, The machine comes with a set of tools for different ...

Description Item # 9396 - AUTOMATIC TRAY SEALER Manufactured by MECAPACK Model Meca 2003 VG Inox Year 2003 Completely refurbished & updated in 2017 by SODIMA Company 3m loading conveyor extension equipped with a variable speed drive and 1 emergency stop button (SODIMA) Tray denester with 1 magazine, 4-lane setup (SODIMA) Siemens automation system with touchscreen (SODIMA) 160 m³/h vacuum pump (SODIMA) 4-to-1 lane merging system for batch code printing (SODIMA) 1 set of 4-lane tooling sized for the trays (SODIMA) Products: 120 x 76 mm dual-compartment PP tray – fruit puree / biscuit Tray depths from 20 to 80mms Film width: 470 mm Cut pitch: 154 mm Machine core diameter: 76 mm Around 10-12 cycles per minute Line speed: 40 trays/minute (i.e., 2,400 trays/hour) Also including a FILLPACK Dual Dosing Unit Two Dosing Units, each up to 300cc Year 2017, Fruit pieces in compote for dosing unit  ...

5-axis machining center Hedelius ACURA 65 incl. standby magazine Control: TNC 640 Year of Make: 2017 Internal machine no. 80 Travels: X-axis: 700 mm Y-axis H / V: 650 / 465 mm Z-axis: 600 mm Swivel table: Ø 650 x 540 mm Swivel range: +30° to -115° Table load: 500 kg Mount: DIN 69871 AD 40 Tool magazine: 65 – compartment Spindle speed: 50 - 14,000 rpm Accessories Standby magazine 180 seats Inclined bed coolant system SKM 900 Chip conveyor LTA Suction 3D Probe Rinsing gun KinematicOpt

Offer 26219 Technical data: - Saw blade dimensions 3375 x 27 x 1.1 mm - Cutting speed infinitely adjustable 18 - 100 m/min - Hydr. Cutting pressure regulation - Hydr.- Lifting + lowering of the saw frame - Machine table left + right swivel for mitre cuts - Cutting area - at 90° around 255 mm - Square 240 mm - flat 300 x 180 mm - at 45° around 210 mm - flat 200 x 160 mm - at 60° left about 135 mm - Max. opening width of the vice 310 mm - Drive 400 V / 2.2 kW - Space requirement approx. W 2000 x H 1500 x D 2100 mm - Weight approx. 990 kg with - Feed roller conveyor 5000 mm - Discharge roller conveyor with dimension stop 5000 mm

General SKU376X935 MakeBecomix LocationBarneveld CEcheck TypeDH-500 Motor Motor power8 kiloWatt Main Features MaterialStainless steel Motor8 KW Inlet diameter50 mm Specified Features - Inline mixer Colloid millcheck Emulsifiercheck Rotor sizesDia 245 x 40 mm Teethed rotorcheck Without hoppercheck Inlet25 mm and 50 mm Outlet50 mm With mechanical sealcheck Motor8 kW (400 V, 2950 rpm) With variable speed drive(freq controller) Speed2910 rpm. Inline high shear mixers MaterialStainless steel 1.4306 (304L) General No.070/4-N0003 Year of construction2010 Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace0,6 x 1 m Total height1 m Weight250 kg Extra Specifications:in-line: colloid-millBiotechnologyAgrochemicalsCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsCosmeticsFood additivesInline high shear mixersLubricants  ...

Overview Complete wine bottling line with KHS and Krones machines for 0.75 l glass bottles, rated at 12,000 bottles per hour. The line runs from depalletizing, bottle washing and empty bottle inspection through the KHS Innofill NRF filler-closer monoblock (natural cork or aluminium screw caps) to capsuling, labelling, case packing and robotic palletizing. A KHS process area with cartridge filtration and a wine warmer-cooler prepares the wine ahead of the filler. The line is still installed and can be inspected on site. Technical data Product: still wine Containers: glass bottles, design bottle 0.75 l Line output: 12,000 bottles/h Closures: natural cork, aluminium roll-on screw caps, shrink capsules Years of manufacture: 2006 - 2023 Scope of Delivery Type | Manufacturer | Model | Description | Year | Listing Bottling line Glass depalletizer | Krones | PRESSANT UNIVERSAL 1N | sweep-off dep ...

Key data: 660 mm, 995 mm

We hereby offer this neat CNC lathe and milling machine. It is a Mazak Integrex 200-IV S from 2010 with the Mazatrol Matrix control. Technical data: Turning diameter: 260 – 660 mm Max. turning length: 1495 mm Bar Passage: 65 mm X-axis travel: 580 mm Y-axis travel: 150 mm Travel Z-axis: 1,045mm Travel W-axis: 1,050mm B-axis travels -30 to 210° Main and sub-spindle: 5,000 1/min. Milling spindle: 12,000 1/min. (Capto C6) Tool magazine: 40 tool positions We can imagine that you would like more information or would like to view the machine. In this case, please contact us with your company details so that we can contact you. About Mamach Machinehandel B.V. : With over 40 years of experience in the CNC machine business, we are now one of the leading suppliers of metalworking machines in Europe. Our success is based on high q ...

Metal detector on its own conveyor, This Lock MET 30+ by Lock Inspection Systems (England) checks products for metal particles as they pass through the detector head on the belt. The detector sits on its own frame with a modular plastic belt and castors, so it is easy to place in a line. Product settings are selected with the keys on the display; one of the stored programmes is for tomatoes., The serial number and year of manufacture have not been filled in on the rating plate, so they are unknown., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/lock-met-30-metal-detector-with-conveyo r/, Type: Metal detector with conveyor, Belt: Modular plastic belt, Controls: Display with selection keys, stored product programmes, Construction: Stainless steel, frame on castors

Minebea Intec metal detector on conveyor, built in 2021, This Minebea Intec metal detector is mounted on a mobile conveyor with a 350 mm wide modular belt, a reject unit and a roller section at the outfeed. The aperture is 400 × 165 mm (w × h), the belt is 2,100 mm long. The conveyor has a transparent guard over the belt., Located in Emmeloord, the Netherlands. Available on request, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/2021-minebea-intec-metal-detector-conve yor/, Type: Metal detector with conveyor, Aperture: 400 × 165 mm (w × h), Belt width: 350 mm, Belt length: 2,100 mm, Dimensions: Approx. 2,400 × 1,200 × 1,200 mm (l × w × h)

The scope of delivery includes: 01x U-shaped collision protection corner, new Material colour: yellow / black (according to DIN standard) Total height: 400 mm Total width: 340 mm Total depth: 205 mm Unit weight: 10.366 kg Opening inner dimensions: 240 mm Base plate: 50 x 200 mm Bore diameter: 15.5 mm Leg length at the bottom: 200 mm Top leg length: 200 mm Material thickness: 5 mm General information about the article: This item is only offered for collection. An additional transport requested or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

The scope of delivery includes: 01x U-shaped collision protection corner, new Material colour: yellow / black (according to DIN standard) Total height: 400 mm Total width: 350 mm Total depth: 200 mm Unit weight: 7.92 kg Opening inner dimension: 236 mm Base plate: 60 x 200 mm Bore diameter: 15.5 mm Leg length at the bottom: 200 mm Top leg length: 55 mm Material thickness: 5 mm General information about the article: This item is only offered for collection. An additional transport requested or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

The lathe has only ever been used for hobby purposes. The guideways are in very good condition. Hardened bed. Everything operates smoothly and is fully functional. The motor requires a 400-volt connection; consequently, it offers more power and runs more smoothly than a 230V version. For additional equipment, please see the photos.

turning diameter:200 mm swing diameter:260 mm turning height:200 mm Tool table:1054 x 400 mm Dimensions (L/W/H):2200 x 2300 x 2300 mm weight:3300 kg slide travel radial ( X-axis ):520 mm slide travel axial ( Z-axis ):200 mm no pallet circulating belt, no C-axis, no driven tools

number of spindles:6 spindle passage:22 mm ?Bar feeder complete is 4.70 meters - for 3 meters of material ?The machine is still on ?Materail to be processed on the machine: Steel ?Production with OIL Machine has only Single-NCU without PCU. The complete energy supply of all 6 main spindles was replaced in April 25. No socket for powered tools!

turning diameter:270 -300 mm turning length:710 mm total power requirement:43 kW weight of the machine ca.:8,5 t dimensions of the machine ca.:3,16 x 2,15 x 2,15 m The machine does not include a chuck or tools ? the machine was originally purchased without these accessories. The G300 has X, Z, Y, C, SP, and driven tools. A bar feeder can be used, but the machine does not have one.

turning diameter:270 mm turning length:710 mm weight of the machine ca.:6,5 t max. swing diameter:590 mm with automatic loading and unloading system G300 with "spindle bore clamping capacity 90mm" in tailstock version The machine has no driven tools. The information in the circuit diagram refers to the rotary drive for indexing the turret, not to driven tools.

turning diameter:270 mm turning length:710 mm weight of the machine ca.:6,5 t max. swing diameter:590 mm with live tools:VDI40 Live tooling VDI40 with automatic loading and unloading system G300 with "spindle bore clamping capacity 90mm" in tailstock version Chip conveyor, belt filter press, hydraulic unit, as well as infeed and outfeed chain conveyor EWAP, with 33 pallets. The machine has no driven tools. The information in the circuit diagram refers to the rotary drive for indexing the turret, not to driven tools.

turning diameter:270 mm turning length:710 mm weight of the machine ca.:6,5 t max. swing diameter:590 mm with automatic loading and unloading system, chip conveyor G300 with "spindle bore clamping capacity 90mm" in tailstock version The machine has no driven tools. The information in the circuit diagram refers to the rotary drive for indexing the turret, not to driven tools.

turning diameter:626 mm turning length:3000 mm Turning diameter:600 mm spindle bore:100 mm spindle turning speed range:2800 U/min weight of the machine ca.:18 t Machine overhold and retrofit in 2003 with SIEMENS 840 D control - NC steady rest - 12-fold revolving head - splash doors - tailstock - coolant device