automa used for sale

Flat Conveyor Belt FK 100 Width: 300 mm Length 2500 mm

Throughput depending on material type, speed, and cutting set Capacity: up to 4.000 kg/h Main motor power: 10KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Lenght: 90 Height: 115

Ultimate sealing flexibility with dual impression

We sell this conveyor belt 10 m long. Conveyor width 50 cm, belt width 40 cm.

Powder coating plant Complete line for automatic powder coating The line was operated by us until the end of February and until then it was functional and as required has coated 1 or 2 coats. The complete line includes the following elements: 3 zone spray washing system (DEGREASING): Manufacturer OMT Otto Müller GmbH, Fellbach Year of construction 1997 The pretreatment tunnel is a unit of the painting line, where the surface treatment of the parts is carried out by spraying with chemical solutions. solutions. Its purpose is to degrease and clean the surface of the parts. Dimensions approx: - Length 13.000 mm - width 230 mm - Height 3950 mm (tunnel and fan in total) Dimensions of workpieces: - Length 1,200 mm - width 300 mm - height 600 mm AUTOMATIC SPRAY BOOTH: Company ESB Vöhringer GmbH (now Wagner GmbH) Series: IC-3 Type: A2M 8000 year of construction 1989 Ext ...

Coil line with 4 tonne coiler incl. coil turner HS Automation Conveyor system with 4 tonne decoiler incl. coil turner type MS41OL, year of manufacture 2015 Technical data decoiler: Max. Coil weight: 4000 kg Standard strip width: 500 mm Spreading range: 450 - 550 mm Outer ring diameter max: 1900 mm Spreading process Decoiler drive: hydraulic, three-phase motor 400V 50 Hz Decoiling speed: 30 m/min Tape loop control: Pull-off via preset pressure or via loop control Coil stop arms: 6 pieces with quick clamping system Protective device: andes Reel structure and function The reel consists of a solid structure of electro-welded and machined elements. The expanding mandrel can unwind to the left and to the right. Spreading is performed hydraulically via operating elements from the control panel. The reel is equipped with a three-phase motor with which the reel crown can be wound an ...

We are offering for sale an Automatic Powder Coating Line with full encapsulation of the production process manufactured by Ecoline. Machine is new. Has not been used! Elements included in the line: - Surface preparation tunnel - Drying oven - Cooling tunnel after drying - Manual cabin for short series - Dielectric automatic cabin for quick color change - GEMA applications - Cleanroom to maintain constant operating parameters throughout the year (temperature and humidity) - Polymerization oven - Cooling tunnel after firing - Automatic mono rotary conveyor Additional Information: - 3-zone tunnel entirely made of stainless steel. The first section is heated by an external exchanger and equipped with a coalescing oil separator and bag filtration. Additional equipment includes an automatic chemical dosing system from Endress Hauser. - Drying oven with very good insulation with air curt ...

Unused, complete automatic filling system with heating tank and conveyor belt. manufacture Danish Candle Machinery. Intended for wax-based candle production, but can be used for many other types of filling work. Everything made to order in 2021 in Denmark. Supplied with instructions and EU declaration of conformity. Filling system for filling five units at a time • 1 x 6 kW / 3 x 400 v • Pump, pump bracket, hose • The nozzles are replaceable and come in sizes ø2, ø4 and ø6 mm Heating tank 2000 liters • Heating element: 1 x 9 kW / 3 x 400 v / 30 - 110 ° C • Dimensions: 220 x 120 x 134 cm • Inner and outer tank in stainless steel • Insulation cover in galvanized steel • Lid in aluminum Conveyor • Motor-driven and sensor-controlled • Dimensions: 5 x 0.5 m Find more here - .ucymachines/

Manufacturer: Suzuki Model: K5 Automatic Year of Manufacture: 2001 Type of Machine: Warping Machine Minimum Warping Capacity: 10 meters Maximum Warping Capacity: 1200 meters Creel: ROSTONI, 240 positions Condition: Fully operational and in perfect working condition Find more here - .ucymachines/ Contact us at - sales@ucymachines

ID3532 FC Maschinenbau-Schlüsselbauer-Schindler year/Baujahr 1995/2010 Fully automatic stone finishing system (edge aging, bush hammering, impregnation) Fully automatic stone finishing system for the artificial processing of concrete block surfaces and edges, as well as for impregnation. The special feature of this system is that, unlike conventional processes, only the edges can be aged. Furthermore, the system also allows bush hammering of the stone surface. Fully automatic brick finishing system (stone edge aging, stick planting, impregnation) Fully automatic stone cutting system for the artificial processing of concrete block surfaces and edges as well as impregnation. The special feature of the system is that, in contrast to conventional processes, only the edges can be aged.  In addition, the system also allows the stone surface to be hammered. More details and price ...

Tunnel conveyor belt, conveying height approx. 190cm, total length 380cm, height adjustable, current width approx. 105mm. 380V motor, little used. (there are two tapes)

Key data: 900 mm, 600 mm, 370 mm

The compact laser gantries with laser scanner NSP-9060-xx stand for NanoSec laser processing systems that are based on high-quality fiber lasers or CO2 laser technologies. The laser wavelengths of 1064nm, or 10600nm, are suitable for marking all metals, plastics, organic materials, as well as glass. Portals and scan fields of different sizes can be configured with each other. The new system concept allows the scanners with their high precision and speed to be combined with the x,y,z axes of a gantry. Multiple feeds or large formats are processed with the highest precision and production speed.

Our KVK 3 Automatic is a popular machine. This automatic stretch wrapper with turntable, which, unlike the KVK 3, independently applies the film to the pallet and also separates it again after the wrapping cycle. The winding can also be conveniently started by remote control. No more getting off the forklift, no more bending down to attach the film to the pallet. It is also equipped with a pre-stretch system for 250% elongation. Thanks to the pre-stretching system, you can produce up to 3.5m of film on the pallet from 1m of film on the roll and thus reduce your material consumption enormously. In addition, this system creates only a minimum application tension, so that even light packaged goods are not pulled from the turntable. With a weight of 700 kg, this model is very stable and designed for loads of up to 2000 kg. The KVK 3 Automatic has a 1650 mm turntable and can wrap pall ...

Vibratory Spiral Conveyor / Sorting Device / Spiral Conveyor / Vibratory Conveyor RNA Vibrating Bowl, Sorting Device / Screw Feeder with Vibratory Conveyor for Screwing TechnologyFeeding System, Feeding DeviceManufacturer: RNA Rhein-Nadel Automation GmbHTyp: SRC-N 250-2LSer.- No: 03613 Year of Construction: approx. 2000Pot Diameter Bottom: 250 mmPot Diameter Top: 380 mmPot Inner Height: approx. 70 mmSorting Lane Width: 30 mmTotal Height (Drive + Pot with Sorting Path): 390 mmOscillation Frequency: 100 Hz / 6000 min-1Power supply: 230 volts, 50 Hz control unit

Vibratory Spiral Conveyor / Sorting Device / Spiral Conveyor / Vibratory Conveyor RNA Shaking Bowl, Sorting Device / Screw Feeder with Vibratory Conveyor for Screwing TechnologyFeeding System, Feeding DeviceManufacturer: RNA Rhein-Nadel Automation GmbHTtype: SRC-N 250-2LSer.- No: 03609 Year of Construction: approx. 2000Pot Diameter Bottom: 300 mmPot Diameter Top: 350 mmPot Inner Height: approx. 25 mmSorting Track Width: approx. 30 mmTotal Height (Drive + Pot with Sorting Track): 380 mmOscillation Frequency: 100 Hz / 6000 min-1Power supply: 230 volts, 50 Hz

Vibratory Spiral Conveyor / Sorting Device / Spiral Conveyor / Vibratory Conveyor RNA Shaking Bowl, Sorting Device / Screw Feeder with Vibratory Conveyor for Screwing TechnologyFeeding System, Feeding DeviceManufacturer: RNA Rhein-Nadel Automation GmbHTyp: SRC-N 250-2LSer.- No: 03611 Year of Construction: approx. 2000Pot Diameter Bottom: 300 mmPot Diameter Top: 350 mmPot Inner Height: approx. 25 mmSorting Track Width: approx. 30 mmTotal Height (Drive + Pot with Sorting Path): 380 mmOscillation Frequency: 100 Hz / 6000 min-1Power supply: 230 volts, 50 Hz- The

Vibratory Spiral Conveyor / Sorting Device / Spiral Conveyor / Vibratory Conveyor RNAVibrating Bowl, Sorting Device / Screw Feeder with Vibratory Conveyor for Screwdriving TechnologyFeeding System, Feeding DeviceManufacturer: RNA Rhein-Nadel Automation GmbHType SRC-B200-2RBeauguration: approx. 2000Pot diameter top: 300 mmPot diameter bottom: 180 mmPot inner height: approx. 45 mmSorting lane width: approx. 5 mmTotal height (drive + pot with sorting track): 260 mmPower supply: 230 volts, 50 Hz.- RNA control device, type ESG 90 for Adjustable

AUTOMATIC FEEDER FOR HERRING, SARDINE, BAADER 488 Technical description: Power supply: 400 V, 50 Hz, 3 Ph Approx dimensions: 3100 x 1400 x 1900 mm It can be combined with Filleting machine for herring, sardine and mackerel Baader 35

JONAB automation for planing line, Consisting of:, - Tilt hoist, - Cross chain with transport belt, - Cross chain with separation, - Infeed roller conveyor

A vacuum lifting beam including a small sanding unit and a motor is available. Year of construction: 1994, load capacity: 10000kg, dead weight: 3000kg. Engine: Hatz 3L40C and sanding station: Hommel. On-site inspection is possible.

1.0 pcs IML Brewing System with Removal Unit, Stacking Unit and with IML Vision Inspection System for 4-Compartment Cavities Tool Manufacturer: Beck Automation AG Type: B4 Year of Make: 2019

Removal system for lid to capsule 16-fold Abstract: The lids are removed from the open mold with the removal arm. The injected products are removed from the ejector side. On the removal arm, the presence of the parts is controlled. Once the unloading arm has reached its end position, the lid with a vertical servo axis into the waiting box, As soon as the box is full (counting the lids), the box is transported outside and the next empty box is pulled in. Specifications: Product Type: Round Lid Dimensions: DN 50 mm Height: 6 mm Number of cavities: 16 Cycle time of the IML system: 5 s

1.0 pcs IML Brothers - System with Removal Unit, Placement on Conveyor Belt for horizontal stacking injection mould 32 - cavities Manufacturer: Beck Automation AG Type: B32 Year of Make: 2019

Two automatic flat glass sandblasting systems MHG are available. 1) MHG Glastmaster 1500 Automatic, year of manufacture: 1999, blasting height: 1500mm, max. glass thickness: 70mm, blasting capacity: 30m²/h, air consumption per nozzle at 4bar: 800l/min. Machine dimensions X/Y/Z: approx. 4000mm/2800mm/1100mm, weight: approx. 2000kg, control: Siemens PLC. 2) Sandblasting system without nameplate, machine dimensions X/Y/Z: approx. 3200mm/2600mm/1100mm, weight: approx. 1500kg. An on-site inspection is possible.

Pneumatic diverter, electric, as good as new

X-axis: 320mm, Y-axis: 400mm, Z-axis: 90mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power.

X-axis: 500mm, Y-axis: 230mm, Z-axis: 90mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power.

Siphon / Bottle / Party Keg Filler 1 digit GTH 0.5 to 3 liter bottles + 5L party kegs 30 containers/h Dependent on the operator Semi-automatic Year of construction 2025

Machine de mesure tridimensionnelle Marque Renault SEIV type portique CNC Dimensions : 2000 x 1500 mm Courses en X : 1480 mm Courses en Y : 1180. mm Courses en Z. : 890 mm Elle est composée d'une table n marbre , de 3 liaisons glissières , d'un pupitre de commande , d'une commande numérique et d'un palpeur .

Accumulation Head Capacity : 1,8 l // Number Of Heads: 1

An Atlas Copco piston compressor is available. Motor power: 4kW, max. operating pressure: 11bar, intake capacity: approx. 633l/min, delivery rate at 7bar: approx. 412l/min, speed: 1000rpm, tank capacity: 270l. Machine dimensions: approx. 1500mm/500mm/1200mm, weight: approx. 125kg. Documentation available. On-site inspection possible.

General SKU437W1431 LocationBarneveld CEcheck MakeH.E.L. Main Features MaterialGlass Specified Features - Miscellaneous Capacity-40°C to +200°C Motor230 volt Capacity4 x 100 ml MaterialBorosilicate Glass 3.3 General TypePoly-block Mach.No.E1039S Year of construction2011 Floor space0,30x0,50 m Total height0,50 m Weight50 kg Extra SpecificationsCompact automated parallel synthesis platform, 4 reaction zonesindependent agitation control, 250 to 1500 rpmwith partsFine chemicalsStarchOther chemicalMiscellaneousRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsBiopharmaceuticalDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsAPIPlastic & rubberMinerals & inorganicTea, herbs & co ...

Offered are 2 fully automatic stand-alone stencil printers for SMD assembly technology, PCB assembly year 2010. Fully automatic vision system, Linux-based operating software, double loading system, motorized table drive, large printing area X/Y 440mm/440mm, frame size X/Y max. 670mm/700mm, PCB thickness max. 6mm, cycle time approx. 18-25 sec., product changeover time < 5 min., squeegee pressure 4-24kg programmable, snap-off/separation speed programmable, compressed air supply 6bar approx. 60l/min., dimensions X/Y/Z 2080mm/1130mm/1450mm, signal tower 2000mm, weight approx. 285kg. Inspection possible by appointment.

It comes with 3 capsule size format sets 0 / 2 / 4 The machine originates from a prominent pharmaceutical & cosmetic production site in Europe and it is in excellent overall condition - well looked after and serviced on regular basis. Automatic, intermittent motion used capsule filler in Pharma grade Stainless Steel. Working Description: Suitable for small to medium production runs, with mechanical output up to 40,000 capsules per hour: For filling powders, pellets and tablets (incl. various possible combinations between powder, micro tablet and pellets). The dosing / filling stations (dosators) are vacuum assisted, which increases the filling accuracy, allows for handling powders with difficult flow characteristics and - improves compaction of powder • CE marked. • Capability to fill a wide range of powders. •  ...

It is a used, reconditioned Fortuna bun press fully automatic for sale. The machine head can be swivelled electrically and switched off with active movement. Weight range of the machine is 40gr. - 110gr. per piece of dough (30 pieces). Incl. 3 x plates (more plates on request). Price on request.

WSM SZ-250K Feeder The WSM SZ-250K is a feeding device from WSM-Automation, which has been specially developed for applications with high cleanliness requirements. The "k" in the type designation stands for "short" and refers to the shortened length of the sorting coil, which reduces the formation of abrasion due to level and vibrations. Function: It is a feeding device that combines the advantages of spiral conveyors with the need for clean processes. Special feature: The shortened sorting helix (effective length) is the core innovation to minimise contamination caused by abrasion. Scope of application: It is used where high cleanliness is needed during feeding to ensure a clean screw connection. Feeding unit SZ-250K consisting of: Belt hopper BB-01-B (0.5 l) with fill level control and dirt brake Spiral conveyor WFL 200 IU (200 mm) with separator Aluminum chass ...

WSM SZ-250K Feeder The WSM SZ-250K is a feeding device from WSM-Automation, which has been specially developed for applications with high cleanliness requirements. The "k" in the type designation stands for "short" and refers to the shortened length of the sorting coil, which reduces the formation of abrasion due to level and vibrations. Function: It is a feeding device that combines the advantages of spiral conveyors with the need for clean processes. Special feature: The shortened sorting helix (effective length) is the core innovation to minimise contamination caused by abrasion. Scope of application: It is used where high cleanliness is needed during feeding to ensure a clean screw connection. Feeding unit SZ-250K consisting of: Belt hopper BB-01-B (0.5 l) with fill level control and dirt brake Spiral conveyor WFL 200 IU (200 mm) with separator Plexiglass enc ...

Originates from a prominent pharmaceutical production site in Europe and it is in excellent overall condition - well looked after and serviced on regular basis. Working Description: Automatic Push-O / Press-On 3-head capper suitable for plug caps (please see photos) with an output up to 90 caps per minute (depending on cap type and bottle being processed). Stainless steel fully guarded construction, lastly used with jars of 29.5mm DIA and with caps at 19mm DIA (12.5mm neck) + 16mm cap height + 11.6mm cap height. Stainless steel construction 720mm DIA rotary cap sorter with Perspex cover and lid. Comes with two additional sets of format parts including star wheel and guides. Suitable for Pharmaceutical, Cosmetics, Nutrition, Contract Manufacturing, Food, Medical Devices, Chemical and others. Technical Information: Size (machine): L: 3000m ...

used fat baking appliance Habersang Primus 5/E automatic, checked and tested, internal dimensions 185 cm wide, 79 cm deep, for approx. 96 pastries, control Siemens S590U, Ser. no. 84710/001150, 9 kW, 380 V, 50 Hz

Dimensions (L/W/H): 7600x1400x1800 mm Weight: 2950 kg Total power requirement: 9,15 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3960x1400x1800 mm Weight: 1200 kg total power requirement: 9,15 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 6000x1400x1800 mm Weight: 2500 kg total power requirement: 8,05 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4600x1400x1800 mm Weight: 2200 kg total power requirement: 9,15 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A bread roll machine TWA Erika is available. Dough system range: 750g-2550g, product weight range: 20g-85g, machine dimensions X/Y/Z: approx. 700mm/600mm/1700mm. Including three rounding plates. An on-site inspection is possible.

All-Fill Series 200 Twin Head Automatic Filling machine Find more here - .ucymachines/ Contact us at - sales@ucymachines

Offer 25425 Technical data - Motorized upper roller 175 x 30 mm - Continuous lower rollers 250 x 50 mm - Upper roller can be delivered by handwheel - Top roller diameter 175 mm - Lower roller diameter 250 mm each - Projection 1100 mm - Distance base plate – lower roller 1520 mm - Drive 400 V - Space requirement approx. W 900 x H 2650 x D 2000 mm - Weight approx. 1500 kg

The Automatic Liquid Filling and Capping Machine by YQ MACHINERY CO LIMITED offers an inline solution for efficient packaging. Designed for easy operation and reliability, this machine is perfect for businesses in the material handling and packing industries, ensuring accurate filling and capping of liquid products. Where It’s Used: Beverage industry (bottled water, soda) Pharmaceuticals (medicine bottles) CBD/hemp oil bottling Cosmetics (shampoo, lotion bottles) Vape e-liquid production

GKS CP350 Automatic Food Packaging Machine (Vacuum seal Robot) A brand-new, unused, unopened and undamaged item in original retail packaging. Features: Automatic Power Source Electric Material Stainless Steel Food Compatibility Multifunctional Item Depth 1.205m Colour Blue Brand GKS Type Vacuum Sealer Voltage 240 V Item Height 1.67m Model CP350 Country/Region of Manufacture Germany Components Included Roll, Film Bag Item Width 962mm Power 1200 W

RABOLINI IMPERIA C WITH AUTOMATIC FEEDER -Automatic Die cutting machine with Rabolini hot foiling attachment -Year: 1990 -Electromagnetic clutch -Max Sheet Size : 800x1100 mms., Max die cutting size 750x1050 mms. -Control cabin for sheet speed control from 900 / 1600 Sh/hour -Honeycomb plate for hot stamping, 2 chases and frames for die cutting -Three programmable heating zones from control cabin -Rabolini Hot stamping foil unit with programmable pulling rolls -Max pressure power: 280 tons -All parts and accessories -Available in April

A complete laser processing and marking system SIC-Marking is available. Stations: 3, table type: vacuum clamping table, processing area per station X/Y: 1000mm/1600mm, laser wavelength: 10600nm/1064nm, processes: evaporation/cleaning/structuring/surface processing, overall system dimensions X/Y/Z: approx. 25000mm/3000mm/3000mm, operating hours: approx. 2000h. Station 1: laser type: Synrad CO2 laser, number of lasers: 6, laser power: 100W, pulse frequency range: 0kHz-100kHz, power density: 250kW/cm², processed materials: polyamide/PVB/PET, processes: melting/evaporation. Station 2: laser type: IPG fiber laser, number of lasers: 6, laser power: 250W, pulse frequency range: 20kHz-500kHz, power density: 250MW/cm², processed materials: copper/aluminum/tin/lead/iron, processes: structuring/melting/evaporation. Station 3: laser type: IPG fiber laser, number of lasers: 3, laser power: 300W, p ...