aty machine used for sale

Process air cooler/ chiller/ chiller, air-cooled, Type: TAEevo Tech 031 P5-NF MTA S.p.A. TAEevo Tech 031 P5-NF are air-cooled compact water chillers suitable for outdoor installation (-5°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 115 ltr., built-in P5 high-pressure pump, open expansion tank 14 liters and evaporator as NON FERROUS version. Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 8.98 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 1.5 Available pump pressure (bar) 5 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 6.6 Max. Current (A) 12 Starting Current Circuit (A) 47 Protection class: IP54 Dimensions: Length (mm) 1315, Width (mm) 660, Height (mm) 1373, Weight (kg) 331 Co ...

2 Hot melt glue machine Meler, glue melter, 5 liter hot melt glue - used - : Price per piece from location: only 2.950.-€ (net)! Manufacturer: Meler Type: Micron 5 Year of manufacture: 2018 Ref.: 101002240 Micron 5/4 N Serial number: e.g.: 1J800918 Outputs: 4 TANK CAPACITY: 5.15 liters MAXIMUM ALLOWED BLOCK VOLUME DIMENSIONS OF 192 mm DIMENSIONS W 182 mm DIMENSIONS C 106 mm MAXIMUM MELTING CAPACITY: 9 kg/h () PUMPING CAPACITY 29.3 kg/h pump 7 cc () 66.0 kg/h Pump 19 cc () NUMBER OF OUTPUTS: 4 TEMPERATURE RANGE: 0 A 200°C (104 A 392°F) Optional: 40 A 230°C (104 A 446°F) TEMPERATURE CONTROL: RTD ± 0.5°C (± 1°F) MAXIMUM OPERATING PRESSURE (AT 6 BAR): 81.6 bar (1,183 psi) DIMENSIONS (L X A X H): 587 x 341 x 481 587 x 341 x 628 (lid open) WEIGHT: 37.5 kg (without filling) 1-N/PE 230V, 50/60 Hz, 7.1 kW 3-N/PE 400/230V, 2.4kW, Condition: good Avail ...

Mantle Packaging Stainless manual tray sealer, twin tray operation, temperature and timer controls, tray dimensions 270mm x 280mm, 1Ph

Two-station machine for articles up to 5 ltr. Extruder 90/22D. Single head CoEx (virgin - regrind - virgin). Good condition. Still in production, free approx. June 2020. With waste conveyor below the machine

General Manufacturer: Spinner Type: TTC300 65SMMCY Control: Siemens 840D SL ShopTurn Year of Make: 2015 Travel X1 / X2 / Z / Y: 180 / 110 / 450 / +40-40 mm Rapid traverse X1 / X2 / Z / Y: 15 / 15 / 15 / 24 m/min Turning Spindle 1 Speed: 4,000 rpm Chuck size: 250 mm Spindle passage: 52 mm Spindle power S1 / S6: 21 / 27 kW Torque S1 / S6: 201 / 258 Nm Turning spindle 2 Speed: 7,000 rpm Chuck size: 130 mm Spindle power S1 / S3: 6 / 8.5 kW Torque S1 / S3: 49 / 68 Nm Revolver Number of tools: 12 + 12 (BMT45) Rotating Tools: 12+12 (BMT45) Speed: 6,000 rpm Power S1 / S3: 2.3 / 3.5 kW Torque S1 / S3: 7 / 11 Nm Dimensions and weight Dimensions: 2,700 mm x 1,900 mm x 2,165 mm Weight: 5,100 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: IKZ 50 bar with belt filter system Parts Conveyor Belt w ...

Used Nail Box (Loose Nails) for Pallet Making Machine; Tilt function for loose nails for separation into the nailing machine (feeding) to the nail guns; Pallet production; functional, functional. not cleaned, not refurbished. Dimensions: 580x810mm Overall width: 760mm Total height: 710 mm Shipping by freight forwarder possible Nail Box IMH Machinery AB nailing box for IMH Machinery AB pallet IMH Machinery AB Year of manufacture 2004 Nail box for IMH pallet nailing machines. Sold in used condition. Dismantled ready for use. Dimensions of the box: 580mm x 810 mm Overall width: 760 mm Total height (not extended): 710 mm Shipping possible with forwarding agent. Asking price: 3250 EUR Nail box for IMH Machinery AB (Pallet production machine) used conditions, ready to work dimensions and condition: see pictures. dispatch / freight possible.

Bearing number: 3488 Profile steel shears Manufacturer: Mubea, Type: KBLH 500 Machines NR.: 0156085927332, Year of construction: 0 Specifications: Size Printl 50 To Max punching dia 30 x 15 mm mm Stroke length 0-60 mm Number of strokes per min. 16 Extension 410 mm Flat steel 180 x 20 - 400 x 10 mm Angular steel 50 mm Round steel 55 mm Total power 7.5 kW Hydraulic. Length: 1400 mm, Height: 1800 mm, Width: 800 mm, Weight: 1800 kg

LS8 2500 knotted mesh production machine was built in 2016 in Poland by Maszyny S.C. The machine is used in the efficient production of durable and damage-resistant L-, M-, S- and SL-type mesh. The entire production process, from wire feeding to net braiding, is performed fully automatically. The fixed knot fence production line weighs 2600 kg. Technical specifications of the LS8 2500 knotted mesh production machine - type of produced net : L, M, S, SL - maximum height of the produced net: 225 cm - horizontal wires spacing: 15 or 30 cm - number of horizontal wires: 26 pcs. - edge wires diameter range: 1.8-3 mm - inner wires diameter range: 1.5-2.5 mm - edge wires maximum stress: Rm=1200 MPa - horizontal wires maximum stress: Rm=450 or 1150-1200 MPa - vertical wires maximum stress: Rm=450-500 MPa - power: 11 kW - pneumatic pressure: 0.6 MPa - power supply: 3x 400 V; 50 Hz  ...

LS6/4 knotted mesh production machine was built in 2006 in Poland by Maszyny S.C. The machine enables the efficient production of durable and damage-resistant L-, M-, S- and SL-type mesh. The entire production process, from wire feeding to net braiding, is performed fully automatically. Technical specifications of the LS6/4 fixed knot fence production line - type of produced net: L, M, S, SL - maximum height of the produced net: 200 cm - vertical wires spacing: 15 or 30 cm - number of horizontal wires: 25 pcs. - edge wires diameter range: 1.8-3 mm - inner wires diameter range: 1.5-2.5 mm - edge wires maximum stress: Rm=1200 MPa - horizontal wires maximum stress: Rm=450 or 1150-1200 MPa - vertical wires maximum stress: Rm=450-500 MPa

Robland HX TZ Saw milling Engine: 2x 4 hp, 400V, 50hz Saw blade diameter 250mm Cutting height 85mm to 90° Cutting height 55mm to 45° Sliding table 1450 x 320mm Cutting length 1200mm Cutting width between Saw blade and parallel stop 600mm Miter attack with ezenter tensioner Weight 340kg

Stainless swing top vacuum packer, chamber dimensions 500mm x 430mm x 100mm, seal bars 400mm, timer / temp controls, mobile, 3Ph

gebr. As good as new precision band saw HEMA UH 800 Year 2018 Motor power 4 kW Stepless drive (frequency-controlled) Cutting speed: 400 – 2,000 m/min. (infinitely adjustable) Roller diameter: 800 mm max. cutting width: 780 mm Max. cutting height: 480 mm Saw blade length: 5,600 mm HEMA top + bottom roller guide Precision table swivel device with handwheel and rack Miter Gate Valve Digital blade clamping display Hour meter Engine brake EMERGENCY STOP Limit switch secured doors Extraction connection: D 100 + 120 mm Dimensions: approx. 149 x 90 x 246 cm (W x D x H) Weight: approx. 800 kg Current new price: approx. 30,000 EUR net! Few operating hours Therefore, absolutely mint condition!

Universal milling machine vertically / horizontally from a training workshop Manufacturer Hermle Type FW801 Tool holder SK40 automatic feed in three axes Digital display in three axes Machine technically in very good condition under electricity ready for demonstration Technical data: Travel: x=350mm y=150mm z=220mm Spindle speeds from 50 to 3,150 rpm can be infinitely variable Feed speed infinitely adjustable via rotary pot from 10 to 5,000 mm/min, aisle Special price Used milling machine Hermle FW 801

Machine number: 20932 Operating voltage: 3 x 400 VAC Frequency: 50/60 Hz. Rated Current: 46A 63A Control voltage: 200-240 VAC Power: 28 kW Control: Tool holder: Grinding head: Grinding spindle: Spindle can be swivelled by motor Drive power: 7.5 kW Speed: 0 – 9000 rpm Lens mount: Disc diameter: Max. number of slices: Travel: X: 380 mm Y: 280 mm Z: 280 mm Feed: X and Y axis: 20000 mm/min Z-axis: 10000 mm/min Swivel axes: Designation: C-axis Swivel angle: 340° Feed: max. 66°/s Axis: A-axis: Rotation endless Feed: max. 167°/s Incl. oil cooling and cooling system from the manufacturer ARO Incl. various matching machine accessories such as tool holders, coolant lines and other clamping devices

3000 x 1500mm 4400w BYVISION

Pot sealer on stainless frame, 12 x pots, 90mm x 90mm pots, variable temp control and timer settings, 3Ph

Diosna SPV 240 AF / T. - 4 boilers - Memory control (digital keyboard) - Temperature measurement - Scrapers - 240 kg dough - perfect condition

CNC Model: Heidenhain CNC Version: ITNC 640 Head Type: Automatic Fourth and Fifth Axis Head Additional technical notes for the head: 0.001° positionable head Tool Mount: ISO 50 Spindle power: 38Kw Number of spindle speeds: 4000 Number of tools: 40 X-axis travel: 4000mm Y-axis travel: 1300mm Z-axis travel: 1500mm Fast feeds linear axes X Y Z: 20m/min Table dimensions: 4100 x 1100mm Table capacity: 12000Kg Guides: roller CNC divider: yes Rotation: Continuous Cutter type: fixed bench Chip conveyor: belt Machine equipment: optical scales :::D DIMENSIONS AND WEIGHT::: Length: 10560mm Width: 4200mm Weight: 26000Kg

Baguette langroller Benier BE / Guette -Baguette long roller with long roll-out belt -Bandwidth: 72cm -Total length with band 445cm

Herbort Cube Cutter 10/10

Machine details 1105-02942 Machine type Flat Grinding Machine - Horizontal Make Sit Type R4 CA Built 1981 Control type Conventional Location France Origin Germany Delivery Right away Freight base EX WORK Price On request Technical details Grinding length 450 mm Grinding width 180 mm Workpiece height 300 mm Total performance requirements 9 kW Information Grinding length max. 500 mm Table stroke maximum 600 mm Grinding width max. 180 mm Table size 600 x 300 mm Working height under grinding wheel 500 mm Grinding head Vertical path 300 mm Vertical delivery 0.001 - 0.06 mm/stroke Grinding slide adjustment across 200 mm Grinding wheel size 400 x 150 x 305 mm Grinding wheel speed stfl. 47 - 970 rpm Table load.600 kg Table lifting speed max. 30 m/min. Grinding spindle drive 12 kW Total drive approx. 20 kW - 380 V - 50 Hz Weight approx. 2,00 ...

Key data: 200 mm, 400 , 360

Profile Bending machine Model AR360 -Year 2004 MG brand made in Italy OUTPUT SHAFTS 360 MM Capacity as per the original bending chart here enclosed Configuration installed with the machine -Pyramid dual pinch side rolls independent hydraulic positioning bending and pre-bending performance -The 3 shafts driven with hydraulic motor and gear unit individual on each roll -Synchronized speed automatic hydraulic control between the 3 rotating shafts -hydraulic traction tool to roll HEB_INP_UPN bending on hard-side. -Lateral correctors left/right hydraulic operated in 3 directions Tooling with the machine -Set of rollers for pipe: 6” and 12” -Set of rollers with adjustable opening width up to 400 mm ( for all the profiles bending easy way and hard way ) -Set of rings to increase the rollers opening width up to 500 mm ( for all the symmetric profiles b ...

Steel grinding machine Offer number: 20064 Make: REMA Type: DS 12 ST Machine Number: 108267 Built: 1988 Technical data: - Grinding wheel diameter approx. 125 mm - 2 disc speeds 1450 / 2200 rpm - Right, - Left-hand run - tilting fixed support table ATF 340 x 150 mm - Support table -5° to +15° tiltable - Lighting - Drive 400 V / 0.65 / 0.9 kW - Working height 1000 mm - Space requirement approx. W 850 x H 1150 x D 550 mm - Weight approx. 120 kg

Key data: 200 mm, 300 , 200

Profile bending roll used equipment hydraulic model AR200 year 2008 make MG Italy Capacity bending chart photo in enclosed -Technical data: Output shafts size 200 mm -Machine complete with set of rollers adjustable for the various shape of profiles. -Traction tool hydraulic operated for the HEB-beam - IPE - UNP bending the hard side. -Lateral correctors left and right side hydraulic operated in 3 direction. -Included additional set of rolls for pipe 6" inches -Machine with 3 rolls driven system with individual hydraulic motor and axial gear-unit on each shaft. -The 3 shafts working on bearings, heavy duty type with sealed lubrication. -Centralized control panel movable on wheels with all electric commands. -Dual rolling speed up to 5 mtr/min with automatic balancing system between the 3 rolls. -Safety devices in compliance with European regulation. CE mark. - ...

Machine weight: 39,000 kg Faceplate diameter 2000 mm number of supports: 2 pcs. Dimensions : Height 6280 mm width 6600 mm length 4800 mm Extras: Right support with turret head, left and side - sliders. Digital indication of NS 114. Technical condition at the time of sale: Defective rotary amplifier main drive-replacement is required. Require replacement of cables and wires external piping:-machine control cabinets. Repair and adjustment of electrical parts. Not operated since 1994 The maximum dimensions of a workpiece Height 1300 mm Diameter of 2000 mm Weight 15 000 kg

Kreuter Chocolate temperer Model: TMK100 Serial: 7906/91 Refurbished by Wolf in 2013, 100Kg chocolate temperer, adjustable temp controls, agitation with scrape surface, with all manuals, 3Ph

Servo Electric punching head Large format 3000 x 1500mm With Sheet Master & Duplex carts Year: 2015 Just under 19,000 hours! With tooling

Mettler Toledo PCE model XMV-TE for marking, verifying and security labelling (Tamper Evident) of folding cartons, etc. for serialisation and aggregation (track & trace), the product codes and variable data (serial number, batch, expiry date, data matrix code) printed on the folding carton are checked for accuracy and quality by a camera, output up to 300 cartons per minute, folding carton width 75-200 mm, folding carton height 20-100 mm, transfer unit for folding cartons with lower belt and height-adjustable top stabilising belt with a width of 35 mm, folding carton outfeed belt with a width of 200 mm, Wolke m600 inkjet printer with 2 print heads for applying data matrix codes, etc. with PCE camera print control with a resolution of 1550 x 1200 pixel, reject ejection with collection container, 2 label dispensers for security labelling (Tamper Evident), label format min. 20 x 20 mm, max. ...

Arburg 470C-2000-675 (No. 40) without picker Built: 1998 TECHNICAL DATA Screw diameter [mm]: 60 Spray weight [g]: 427 Spray pressure [bar]: 1440 Closing force [kN]: 2000 Tie bar distance [mm]: 470x470 Clamping plate size [mm]: 715x715 Tool installation height min. [mm]: 250 Control Control: Selogica Monitor: Yes Control cabinet: Yes Language: Polish, German Other Power [kW]: 45.8 Engine hours [h]: 94737 Weight [kg]: 6630 GR - EUROMAP

Bezner Siebmaschine | Roller classifier type TWD Refurbished (Workshop Overhauled) with new bearings (roller bearings), new ball plates and renewed screen box Make: Bezner Type: TWD Screening capacity: up to approx. 60 - 80 srm/h (for wood chips and sawdust) Screen area: 6.0 m² per screen mesh size Screen decks: 2 pieces Factions: 3 Mesh size of sieve: - 1st screen deck: punched perforated sheet metal screen, D = 45 mm or by arrangement - 2nd screen deck: punched perforated sheet metal screen, D = 10 mm or by arrangement Drive power: 5.5 kW, 3 x 400 V, 50 Hz Screen box height: 820 mm L x W x H: 4,000 x 2,200 x 1,550 mm Machine weight: approx. 5,500 kg Machine colour: RAL 6011 Reseda green Screen inserts freely selectable Design of the spouts according to customer requirements Suitable for screening the following bulk materials, among others: - Wood chips - Saw ...

Bezner Siebmaschine | Flat screening machine type BSM-50/1750W reinforced version Screening machine especially for the use of mixed construction site waste (commercial waste, mixed construction waste) used, very good condition - Make: Bezner - Type: BSM-50/1750W - Year of construction: 1995 - Condition: very good condition (used) - Screening capacity: up to approx. 50 - 70 m³/h (for mixed construction waste (commercial waste, mixed construction waste)) - Screen area: approx. 6.0 m² (approx. 2.25 m² for D = 8 mm // approx. 2.25 m² for D = 25 mm // approx. 1.5 m² for D = 60 mm) - Fractions: 4 Crswvwqsw I E H Rsy Eog - Screen decks: 1 piece - Drawer side: up - Drive power: 5.5 kW - L x W x H: 7,000 x 3,540 x 2,700 mm - Machine weight: approx. 7,800 kg - Machine colour: RAL 2001 red-orange Suitable for screening the following bulk materials, among others: - Constr ...

Automatic oscillating curve grinding machine Grinding width 300 mm Grinding height from 3 - 100 mm Feed continuously from 25 - 25 m/min Feed motor 0.55 KW Drive motor 7.5 kW Grinding belt 320 x 2000 mm

Tape welding machine for sawmills up to 35mm Manufacturer Ideal Type B1 220 Volt 6 Ampere Special price

The machine is in good technical condition, after prior agreement possible to test. Control system – Siemens Including filtration. Bed inclination Bed material Number of guides 45 cast iron 3 (4 with Y-axis option) WORKING SPACE (V1- V4) Swing diameter over bed inch 19.69 Swing diameter over cross slide inch 11.42 Largest turning diameter inch 7.87 200 ч Distance between centers inch 30.71 Largest turning length inch 19.69 15.82 20 Max. weight of flying unsupported part of workpiece lb 35 Max. distance of center of gravity of flying unsupported part of workpiece inch 165 from spindle face Max. workpiece weight clamped between centers lb 100 X-axis travel length inches 7.48 Y-axis travel length (OР.) inches 3.14 (+/- 1.57) Z1-axis travel length inches Z3-axis travel length inches Spindle axis height above floor inches 20.67 21.65 39.26 (38.77+1.18) MAIN SPINDLE Spindle face (flat face ...

Thread edge with extensive accessories, by hand or automatically to use. Table model, mobile also for the construction site Manufacturer GF Georg Fischer Table model with electric drive or by hand. Automatically opening thread cutting head Threaded jaws for: 1/2 inch, 3/4 inch, 3/8 inch, 1 inch, 1 1/2 inch, 2 inch Machine in transport box (steel) Rems Tornado Klauke Rothenberger Supertronic Special price

Bosch Car T5 horizontal cartoning machine for vials/bottles, blisters, etc. inmtermittend motion, infeed for blisters, etc. via Transborm System curved conveyor and infeed belt (180 mm x 700 mm (belt width x length)) feeding into an automatic product inserter to put the products into the bucket infeed of the machine, infeed for vials/bottles via Bosch URK 1200 rotary turntable (diameter 1200 mm, suitable for vials/bottles with a diameter of 18-85 mm and a height of 20 to 175 mm) with feeding table (490 x 580 mm (WxL)) and bottle insertion device into the bucket infeed of the machine, carton size range min. 20 x 16 x 60 mm (AxBxH), max. 95 x 70 x 200 mm (AxBxH), reverse tuck closure of the carton flaps, GUK FA21/4 leaflet folder from stack (4 folding pockets, format min. 60 x 80 mm, max. 210 x 300 mm, smallest fold 15 mm), single-sided emboss coder (3 lines), Laetus Argus 6012 bar code re ...

REMONNAY re-cutting machine Type DR8/225 Cutting height 225 mm, 7 stalk adjustment variable with mechanization, S-separation and saddle conveyor Feed roller table with reversing and alignment feeder Extraction device with cross-cut saws with side goods separator and pull-off roller aisle incl. electric control cabinet and control

Siemens MAMMOMAT INSPIRATION, built in 2009 with detector from 2007 in very good technical and optical condition

Sidel SBO 12 PET Stretch Blow Moulding machine. Sidel SBO 12 PET Stretch Blow Moulding machine The Sidel SBO 12 blow molding machine is a state-of-the-art bi-oriented PET blow molding machine designed to produce high-quality bottles for flat and carbonated beverages at a rate of up to 19,200 bottles per hour. Utilizing a cold process, this system offers excellent flexibility and optimized production. Key features include: Cold Preform Infeed: Preforms are automatically loaded and transferred through a reheating system, ensuring precise temperature control. Efficient Heating & Blowing: Preforms are heated and blown into bottles through two-stage high-pressure air blowing for uniform wall thickness. Advanced Molding System: With automatic ejection for defective preforms, the SBO 12 ensures consistent bottle quality, while synchronized cams optimize the entire manufacturing pro ...

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmMax. Turning Length1200 mmTurning diameter500 mmBar diameter max.65 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 ...

Rated power at 50%ED: 63kVA Short-circuit current: 31kA Electrode force: 730daN / double stroke Extension: 500mm --- - Electrode arm top-straight D45/25/500g - Electrode arm bottom-straight D45/2/500g --- Welding control: MPS 10 (5-times, 8-program) --- Spring pull on request --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

DECKEL S11 Sharpener TECHNICAL FEATURES: Wheel diameter: 125 [mm] Workpiece Spindle Nose: ISO 40 Paper Filtration: No Supply voltage: 400 [V] Installed power: 2 [kVA] Dimensions: 1100 x 800 x 1760 Weight: 520 [Kg] EQUIPMENT INCLUDED: x1 Universal Divider with Quick Indexing – Part Number: 255X0X x10 divider rings for fast indexing x1 tailstock with transverse adjustment – Ref.: 2621000 x1 tailstockwith vertical adjustment – Item No.: 2624000 x1 complete swivel bracket – Article No.: 2626000 x1 Grinding Unit (Concave or Convex) – Item No.: 2628000 x1 1 Universal Depth Gauge – Part Number: 2570000 x1 1 helical sharpening device – Article No.: 2580000 x1 draft grinding slide – Item no.: 2673000 x1 universal vise – Ref.: 2635000 x1 optoelectronic measuring unit with microscope – Part Number: 2650012 x2 RSF-Elektronik digital axis visualizatio ...

Kegelrundwirker W&P CR 59 -Bread dough Rundwirker Werner & Pfleiderer -Model CR 59 -with oiling -With Teflon Kegel -with hot air

RBP BAUER DEBLISTERING MACHINE, MODEL D3600 Built in 2003, this machine is equipped with speed control, magazine level monitoring, counter and product-specific tool for ensuring GMP-compliant recovery of pharmaceuticals that can be returned to the production cycle. Can be plugged to a central vacuum system. With manuals, maintenance file, electrical diagram, pneumatic diagram. CE compliant. Output: up to 60 blisters/min Format range: 150 mm x 120 mm Tooling changeover: 3 min (approx) DIMENSIONS Size: 550 x 1100 x 1530 mm Weight: 100 kg (approx) ENERGY CONSUMPTION Supply voltage: 110/230 V AC / 50-60 Hz Control voltage: 24 V DC

Double head wire stitching machine Hohner Accord 25/40; good condition; cleaned and tested; Max. Stapling thickness 25mm with clamp slung and 40mm on both sides; 2 staple heads; Length bracket back 14mm. Double head wire stitching machine Hohner Accord 25/40; good condition; cleaned and checked; max.thikness 25mm or 40mm by both sides; 2 heads; lenght of clamp 14mm.

- travel range: X= 485, Y= 385, Z= 380 mm - table size: 800 x 460 mm - tool holder: SK 40 - dimensions LxWxH: 2440 x 1800 x 2100 mm - weight: ca. 2.000 kg

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Work spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmWorking areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmClamping chuck diameter max.315 mmMax. Turning Length800 mmBar diameter max.65 mmMain drive 1Drive power (100% DC)33 kWSpeed range20 - 4000 rpmTorque (100% DC)580 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the  ...

Head circuit for OASE spiral kneaders of type SPK125/150/AE for spiral kneaders with soil emptying or center emptying

AVE Labelling Machine. 3 labels, Capacity: 6 - 7 000 b/h

Kosme Hot Melt Labeller Capacity 8 000 b/h