annealing furnace used for sale

Furnace / annealing furnace Degussa Wolfgang near Hanau Oven no.: 20881 Type: KO 80/50/120 Year of construction 1967 1000 °Cels Volt 380 Hz 50 AMP 82 kW 54

MAX. TEMP.: 1000 °C, CAPACITY: 60 TON, NO. OF BURNERS: 20,

Qty. 1 Second-hand batch-type annealing furnace Mfc.: LOI SAAR Type: natural gas (Hu=3.6 MJ/Nm³) Charging material: square, round dia. 50 up to 200 mm Length: 6.2 m Max. heat treatment temperature: 950 °C Capacity: max. 60 T at normalising 35 T Application: Tempering, stress relieve, normalising Heat gradients: 60 °C/h average (adjustable) Heating zones: 4 Number of burners: 20 Control principle: on/off with digital programmer Temperature precision: 10°C tolerance at 550 °C

1. 1971, BELL TYPE, TEMP.: 500 °C, COIL DIM.: OD 1400 MM x 1600 MM 2. VEB, 1971, INNER CHAMBER DIM.: 2.5 x 1.3 x 1.5 M, TEMP.: 500 °C

Qty. 8 Second-hand bell annealing furnaces Mfc.: FERRE’ Built: 1980 Modernisation in 2000 Protective atmosphere: N2 No. of furnaces: 8 No. of base: 24 Base relationship: 1 : 3 Annealing temp.: 670-710 °C Coil dia.: 1900 mm Max. stack height: 3600 mm Electric Drawing Mechanical Drawing Combustion Drawing Certification: Allegato V/81 User manual

Max 1100celsius; chamber measurements approx 1500x600x400mm.; including conveyor and registration/control unit(max 800 degrees); measurements base unit approx 2600x1800x2500mm..

Max 1100celsius; chamber measurements approx 1500x600x400mm.; including conveyor and registration/control unit(max 800 degrees); measurements base unit approx 2600x1800x2500mm..

Working/ nominal temperature: 800/ 850°C, inner dimensions: 1100x500x260mm, heating output: 120kW, connected load: 1.5kW, with documentation, without accessories or spare parts, an inspection is possible.

Usable chamber dimensions: 3800x1800x300mm, max. operating temperature: 1000°C, max. annealing temperature: 980°C, max. workpiece weight: 800kg, fuel: natural gas, connected load: 600kWh, with documentation, on-site inspection is possible.

Description: Natural gas feeder Efficiency 9.9 kWh/m³ Consumption 35 m³/h Maximum temperature 800°C Maximum coil weight 3 tons Maximum coil diameter 1400 mm Maximum coil height 2000 mm Power 350 kW PLANT DISMANTLED WITHOUT DOCUMENTS For transport, the following are required: 2 exceptional transports 2 normal trucks Approx. Onsite Dimension. (l x w x h): 12,000 x 6,000 x 4,000 mm, weight approx.: 25,000 kg

CHARACTERISTICS HEAT TREATMENT EQUIPMENT   heating method: electric   temperature min.: 420 °C   temperature max.: 930 °C   throughput, capacity: 6000 kg/h Throughput per Hour+ 420-680 degrees Celsius: 6000kg+ 830-930 degrees Celsius: 3200kg - Red tube storage racks next to the furnace not included

CHARACTERISTICS HEAT TREATMENT EQUIPMENT   heating method: gas   temperature min.: 420 °C   temperature max.: 930 °C   throughput, capacity: 10000 kg/h Throughput per hour+ 420-680 degrees Celsius: 10'000kg+ 830-930 degrees Celsius:  7'150kg

Max. Working temperature: 1120°, heated length: 1000mm, cooling length: 1850mm, channel height: 40mm, conveyor belt width: 110mm, throughput speed: 100-1000mm/min, splitting gas consumption: 1.5-2.5Nm³/h, touch panel: Siemens SIMATIC HMI, length: 5000mm, width: 650mm, height: 1350mm, with integrated ammonia splitter GSP 25 FA, integrated gassing panel, protective gas from ammonia splitter (on-site ammonia supply) + N2 purge gas as required, MSR system with Siemens PLC and touch HMI, atmosphere monitoring, process documentation, on-site inspection is possible.

Carbolite CWF 11/5 Chamber Furnace 1100 °C Max Temp: 1100 °C With suction device and table The upward-opening door keeps the hot surface away from the user Gently self-closing door (for 5, 13, 21 & 23 litre models) Standard start-up delay and process timer function Durable alumina backing plates for the heating elements; Robust door frame and base plate High-quality fiber insulation with low thermal mass Powerful heating elements on both sides ensure very good temperature homogeneity Easy access to elements and controls simplify maintenance and servicing More items new and used - you can find them in our shop! International shipping costs on request!

Manufacturer: Fata Production Machinery (1995) Main Equipment: 2 pay off reels Entry Lap Welder (Taylor Winfield) Vertical Accumulator High Pressure Spray Cleaning Section Electrolyte Cleaning Section Brushing Cleaning Section Rinse Section Vertical Annealing Furnace (Selas) Flying Exit Shear 2 Tension Reels Line Capacity: 60.000 MT/year Maximum Process Section Speed: 113m/min Maximum Entry Section Speed: 136 m/min Maximum Strip Thickness: 0.28 mm Minimum Strip Thickness: 0.17 mm Maximum Strip Width: 1000 mm Minimum Strop Width: 700 mm Maximum Coil Weight: 18 MT Crew: 4 Operators

Suitable for stainless steel wire: 1.4301, 1.4310, 1.4401, wire diameter: 0.25-0.5mm with a strength up to 2400 N/mm², working speed: 75-80m/min, temperature range: 400-650°C, suitable for four wires at the same time with one temperature gauge (movable), shielding gas: forming gas grade 95/5 95%N2/5%H2, nitrogen gas, cooling: water-cooled tubes.

Rotary kiln, gas oven, pyrolysis oven, thermolyse furnace used Manufacture: REIDHAMMER Type: DRA 10/150-G-650; DRA 8/100-G-650 Built in 2015 Temperature max 650° C Natural gas Furnace chamber approx. 8 x 2 x 2.2 m Filling volume 1.77; 0.63 m3 Dimensions total approx.: 17 x 2 x 3 m

AIR TEMP.: 600 °C, 2 CHAMBERS, SLAB DIM.: 1.54 x 3.0 x 0.35 M - W x L x T

Glass Heating Equipment Furnace GT1411 Equipment application. This special equipment is used for heating homogenously the flat glass and cooling it thereafter, is involved in the glass deep processing machinery. The suitable working glass is clear float glass. Power supply requirement and total weight of equipment. This kind of equipment requires a 3-phase-5-line AC power supply of 380V and total installed power of it is about 250kW. Total weight is about 10 tons. Constitution of Glass Heating Equipment. Computer, control cabinet, power regulation cabinet, loading table, heating section, coating section, annealing section, unloading table. The Furnace was in good operational condition when it was dismantled in 2016. The unit is located in a warehouse in Finland

Electrically heated box furnace, make VEI-Engineering type: LU temperature: max. 650°C heating power: 45 kW fan: 3,0 kW total connected load: approx. 52 kVA internal dimensions (l x w x h): 1.000 x 700 x 700 mm charge weight: max. 1,0 t

Pit furnace, make VEI type: VEI_SCO_EB clear height: 1200mm clear diameter: 1400 mm outer diameter: 2200 mm outer height (lidless): 1650mm outer height (with lid): 2600mm electrically heated: 64,5 kW fan: 5,5 kW connection: 400 V, 50 Hz temperature: max. 750°C

Inv. Num. : 6789 Type: Furnace Producer: SOLO Generated: Parameters: Maximum temperature: 1150 C

It is made for heat treatment of steel (originally 100Cr6 steel). Possible customers : automotive suppliers The last heat treatment on this line was made in 2018. For a better industrial usage, the supervision of the line need to be upgraded. The original constructor is FDI (Deleau Furnace), which was bought by ATI Furnace ati furnace nabertherm Forge from 60 to 400 Ton Forging and Annealing Furnace

Tunnel Type Annealing Furnace Mioba Mfg: Mioba Year of Mfg. 2008 Temperature 450 – 950 C Fuel: Natural Gas 15 Zones with a total of 144 Burners Plate thickness 3-120 mm Plate width 700 – 3.800 mm Plate length 16.500 mm Max Plate with thickness of 40 mm: 3200 x 12.000 mm Max Plate with thickness of 8 mm: 2500 x 10.000 mm Special roll load 2.260 kg/M 7 Conveyor Roll Sections; total 177 centrifugal casted rolls Speed 0,25 – 25 M/Min. Furnace Length 80 Meter; inside width 3900 mm

Through annealing furnace PADELTTHERM Type: Raw 50 X 15 X 150 - E Circuit diagram no.: 6 - 16-4 BP Order No.: 9070/4 Year of construction: 2000 Rated voltage 400 ~ V Control voltage 230 V Nominal power 32 KW Protection class IP 54 Nominal current 58 amp. maximum temperature of 1050° C Weight 2250 kg very little in a University used.; good condition, like new

Ladies and gentlemen, Below you will submit a non-binding offer for a used 3.7 tonne arc furnace: Offer Arc Furnace we will send you our offer with technical data on a used standard system arc furnace 3.7 t All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of  ...

Ladies and gentlemen, Below you will submit a non-binding offer for a used 50 tons arc furnace: Offer Arc Furnace we will send you our offer with technical data on a used standard system arc furnace 50 t All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the ...

Ladies and gentlemen, Below you will submit a non-binding offer for a used 50 tons arc furnace: Offer Arc Furnace we will send you our offer with technical data on a used standard system arc furnace 50 t All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the ...

Gas furnace, make VEI type: KA_GB_TO external dimensions (w x h x d): 3000 x 3700 x 2300 mm interior dimensions (w x h x d): 1500 x 2200 x 1500 mm temperature: 300 ° C loading weight: max. 2500 kg circulation fans: 2 x 4,0 kW = 8 kW heating power: 120 kW

Electrically heated chamber furnace, make VEI type: KA_EB_TO external dimensions (w x h X d): 2500 x 2900 x 1700 mm usable dimensions (w x h X d): 1250 x 2000 x 1250 mm temperature: 250 ° C heating power: 24 kW

Gas-fired continuous furnace, make VEI type: DLO_GB heated length: 4000 mm conveyor belt width: 900 mm emperature: max. 950 ° C

Gas heated tempering furnace, make VEI type: KA_TRU_GB external dimensions (w x h x d): 1700 x 2050 x 3900 mm useable dimensions (w x h x d): 600 x 850 x 1800 mm temperature: max. 600°C circulation fan: 4,0 kW loading weight: 3.000 kg gross

Crucible melting furnace, make VEI type: SO_EB_BU Temperature: 300°C - 1250°C

18 kW, 1150 C. - see picture

Shaft furnace,make VEI type: SCO_EB height: 1100mm useable diameter: 790mm outside diameter: 1560 mm outer height (without lid): 1480mm outer height (with lid): 2300mm electrically heated: 40 kW circulating fan: 2,2 kW three-phase supply: 400 V, 50 Hz temperature: max. 750°C

external dimensions (w x h x d):1500 x 1600 x 2500 mm useable dimensions (w x h x d):750 x 600 x 1100 mm temperature: 1200°C electrical heated: ca. 42 kW charge weight: 700 kg

Qty. 1 Second-hand gas heated log furnace including hot shear Mfc.: ELHAUS Type: L250-90/135/4FK – WS250BD Built: 1999 Log dia.: 10” – 254 mm Log length: 5 – 7 m Billet length: 650 – 1300 mm Min. shear temperature: depending on the alloy approx. 340 – 400 °C Log temperature max.: 530 °C Heated by natural gas Hu=8.600 kcal/Nm³ Gas consumption: 234 kWh/tAl – 23.5 Nm³/t Al El. power: 130 kW Number of heating zones: 4 Number of circulating zones: 3 Dimensions of the furnace: 14.75 x 2.2 x 3.9 m - L x W x H Hot shear Recoil pressure: 0 – 100 bar Recoil stroke: 1.85 m Shear force: max. 1.69 MN at 210 bar Shear stroke: 360 mm Output pressure: max. 160 bar Output stroke: 325 mm Closing pressure: 210 bar Spreading stroke: 2 x 4.0 mm Dim.: Height above hallway: 2.9 m Length over everything: 3.95 m Width over everything: 2.65 m Hydraulic station Max. ...

Hardening furnace ZWUT PSK-1 built by ZWUT. It is intended for various types of laboratory and industrial work. Technical data : - power consumed at T = 1350 degrees C: 4,10 kW - installed power: 5.5 kW - power supply voltage: 220 V, 50 Hz - secondary voltage of the autotransformer: 7-41, 1-3-58, 9-5-84, 4 - number of phases: 1 - nominal temperature: 1350 degrees Celsius - temperature control accuracy: 1.5 (or 0.2 + /%, when working with a feedback attachment) - type and number of silites: 8/150/150/10 mm / pcs - warm-up time to T: about 3.5 hours - usable dimensions of the heating chamber (height x width x length): 150 x 150 x 280 mm - furnace weight: 138 kG - weight of the cabinet: 81 kG

gas-fired preheating furnace type: KA_GB working temperature: 600°C max. allowed furnace chamber temperature: 750°C cennected load (el.): 2,5 kVA gas pressure: 60 mbar gas type: natural gas heating power: 130 kW (max. 150 kW) external dimensions (approx.) (w x h x d): 2000 x 3530 x 2500 mm useable dimensions (w x h x d): 1100 x 1330 x 1500 mm

Oven wild Barfield Temperature: 500 ° C Dimensions: Inside dimensions (WxDxH): 470 x 440 x 400 mm External dimensions (WxDxH): 850 x 600 x 730 mm Supply: 380 volts

The pictured furnace is a circulation chamber furnace. The furnace drives under a nitrogen atmosphere and acts as a stabilizing furnace e.g. for copper alloys. Furthermore, the products are scanned by a scanner located outside the cabinet and for the various products different programs can be stored. The controller automatically performs, provided for the product program. usable dimensions (w x h X d): 1000 x 1400 x 1300 mm temperature: 300°C, +/- 2K heating power: 72 kW

usable dimensions width: 700 mm height: 650 mm depth: 1100 mm rated voltage: 3/400 V, 50 Hz control voltage: 220 V AC 24 V DC total power: 250 KVA temperature under vacuum: 600 - 1350 C heating: rated power: 200 kW heating conductor: graphite pumping rate: booster pump: 250 m3/h roots pump: 2050 m3/h oil quenching: bath volume: approx. 5,0 m3

Multi-storey tunnel oven of Daub type CCTO 20.96.6 with thermal oil system with 6 floors incl. hinged plates for sale. -6 floors each 2000mm wide and 9600mm long -Total baking area 115.2 sqm -Lights passage in floor 180mm -Steam zone 1200mm -Temperature zone classification stove 1- 3 is top and bottom heat common -Temperature zone classification stove 4- 6 is separated from upper and lower heat -Oven compound outside 3000mm wide 10360mm long and 3250mm high -oven weight approx. 40 ton -with 6 pull-off trolleys including 12 pull-off apperates -Wagenkrabbler -with thermal oil boiler -with compensating container and drain container -oven is in operation and can be visited on request

Temperature: 500 ° C Dimensions: Inside dimensions (WxDxH): 470 x 440 x 400 mm External dimensions (WxDxH): 850 x 600 x 730 mm Supply: 380 volts

Max temperature: 650 ° C Dimensions: Inside dimensions (Wxh): Ø 260 x 700 mm Dimensions (Wxh): Ø 700 x 1400 mm Connection: 380 Volt / 8 kW Machine weight: 300 kg

Gas-fired recirculation chamber furnace max. temperature: 300°C external dimensions ( d x w x h): 2500 x 5300 x 8300 mm internal dimensions ( d x w x h): 1500 x 3800 x 3000 mm control zones: 2 burners power: 4 x 90 kW fans power: 2 x 4 kW

electrical heated tempering continuous furnace external dimensions: lenght: 3900 mm width: 1320 mm height: 1090 mm (above base frame) muffle lenght: 3960 mm max. furnace area temperature: 750°C max. temperature inside the muffle: 700°C water cooled ventilators : 3 electrical connected loads: three-phase: 3 x 400 V, 50 Hz power consumption: 75 kVA heating power, 3 zones each: 24 kW = 72 kW PLC : Siemens S7

rotary drum dimensions: length: 6000 mm inside: Ø 1600 mm outside: Ø 2280 mm max. temperature: 1200°C heating: gas eating power 2700 kW melting capacity: 6000 kg / h The plant consists mainly of: - furnace - hydraulic power pack and tilting mechanism - heating system - carousel with molds - charge box - measuring and control system

Used burn-in tunnel kiln for drying or burning products made of glass, ceramics or similar things. A total of up to 8 ovens are for sale. The belt furnaces were installed in a system for the glass foam (foam shading) production and were in use until the demo days of the complete plant. We also continue to have components of the plant, such as mills, mixers, silos, and conveyor technology. Manufacturer: MUT GmbH Jena Type: BDO 100-150 Built: 2003 Max Temp. 1100°C Connection value: 315 kW Control SIEMENS S7 -300 Length approx. 14 m Internal dimensions: approx. 300 x 1000 mm The ovens can also be used for tempering, glazing, sintering, blowing, drying and cooling of powdery or chunky goods.