We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,305 used machines on RESALE, but how to find them? Machine Search
technical data: Roller speed length/width: 4.10 m Roll Dimensions: 550 x 140 Roll spacing: different
used
technical data: Funding length: 2 m Axle distance: 1.8 m Bandwidth: 1500 mm
technical data: Purpose: for boards Dimensions: 700 mm wide Note: as good as new Warehouse: Wiesentheid
used
used
REM Foundry is built on a 10.000 sqm surface and a further 7.000 sqm added in 2010. The Foundry was designed to manufacture castings made to customer specifications. Here were casted parts ranging from 1 tone up to 50+ tones, for industries like: wind mills, heavy machine tools, mining, energetic etc. At full capacity, the foundry is able to produce over 1200 tones of castings per month. All the machines in the Foundry come from top suppliers such as Inductotherm Europe and IMF Italy, are enviroment friendly and respect all the EU regulations. - medium frequency induction furnace: maximum capacity - 28t - medium frequency induction furnace: maximum capacity - 23t - conveyor carrier for cores - vibrating table for cores - silos with a capacity of 550t - continuous mixer for moulds with maximum capacity of 60t/h - continuous mixer for cores with maximum capacity of 10t/h - sh ...
used
SIDEL SBO 16 / 20 Universal Eco2 Predis Ul.Cl. PET blowing machine for 16 hot or cold moulds. The manufacturing year is 2011 and the capacity is of 25.600 BPH (1.600 bpm/h). The moulds are hot up to 75°C (or standard) and the machine is equipped with quick change for moulds. The oven type is Sidel Universal Eco2 C3 special filters. The number of heating modules are 20. Personalization for preform neck 38mm 3 starts. Machine equipped with: - Sidel preforms tipper, hopper & feeder - Sidel AGR preforms disinfection - Sidel Predis Ultra Clean - Vulcanic water/oil thermoregulator - Sidel PCC drive & electrical cabinet Regular maintenance and service by SIDEL. The machine is still installed and has to be dismantled. If you are interested, you can contact us for further information and to discuss about the availability.
technical data: Type: not driven Make: Möhringer Rolls Number: 3 pieces Warehouse: Wiesentheid
technical data: Make: Möhringer Power: 5 kW
technical data: Machines No.: 0115 Drawing No.: 170 317 00
technical data: Rank: 10 90 curved Transport by roller link chain and steel chain wheels Drive without motor
used
used
RUIAN KODA MACHINERY ENG-500 film glove production line, built in China in 2020, is designed to produce high-quality double-layer film gloves that are used in e.g. grocery shops or in production. The high-quality steel construction of the automatic glove making machine ensures high stability even at maximum production speeds of up to 500 gloves per minute. The film glove production line uses moulds to produce disposable film gloves with a maximum length of 400 mm and a width of 300 mm, providing effective protection against viruses and bacteria. The 2.2 kW YASKAWA servo drive, which controls the entire process, ensures high precision in feeding the material to the sealing position and the sorting point of the final product. The ENG-500 film glove making machine also allows the production of other film products, such as breakfast pouches, after changing the heat sealing dies. The au ...
used
with technical advice, Affordable housing Low-cost housing, cmodul austria low cost housing • Pallet circulation systems for filigree and double wall elements NEW & USED • Machines and systems for prefabricated parts - battery formwork, tilting tables and special moulds • Stationary concrete block paving stone and edge stone installations + shapes as NEW • Mobile concrete stone machines + moulds as NEW • Concrete pipe and shaft ring machines and parts thereof • KS - Lime sandstone works • Dry mortar plants and parts thereof • Brickworks and parts thereof our used lines meets after reinstallation by us the Definition RETROFIT
used
RUIAN KODA MACHINERY ENG-500 foil gloves making machine, manufactured in China in 2020 is dedicated to the production of foil products i.e. breakfast bags or disposable gloves, using interchangeable sealing moulds. The robust steel body of the film glove production line ensures high operating stability, even at maximum production speed. The copper dies included with the machine allow for the production of high-quality disposable gloves with a maximum length of 400 mm and a width of 300 mm. The ENG-500 automatic film glove production line produces up to 500 pieces of this type of item in one minute. The produced gloves are characterised by two thick layers, effectively protecting the hands from viruses and bacteria. The automatic film glove production line is equipped with, among others, an AISET temperature controller, a PLC controller and a 2.2 kW YASKAWA servo drive, which ensure ...
Machines No.: 0052 QFL 0053 Insertion Drawing No.: 146 001 75 1 cross conveyor light with insertion: Power: 0.37 kW Axle distance: 2.06 m Rank: 3 Transport by 3/4" chain and stanhl chain wheels Drive by special gear motor Substructure and bearing housing in steel construction
used
technical data: Strand spacing: 700x700x1200x1500 Rank: 5 Axle distance approx.:5500 mm Make: Unknown
used
DESKTOP METAL STUDIO SYSTEM 2 3D printer (year 2018) Ideal printer for printing high-performance metal parts in the office. Desktop Metal’s Studio System 2 Metal 3D Printer extrudes a metal filament (in the form of rods) to create the desired geometry. You don’t need a removal step for the plastic binder that holds metal dust in a filament (or associated equipment) when printing with 316L stainless steel. Impressions from the Studio system are transferred directly to the accompanying furnace, which first heats the parts to remove all binders from the parts, then increases the temperature to nearly melt for sintering. This printer is working and live demo can be done. Work hours: Printer: 164 jobs x 10h = 1640h Debinder: 46 jobs x 18h = 828h Furnance: 21jobs x 48h = 1008h Includes software and transformer to convert the American frequency into European.
used
Precast Modular House Machine, Low Cost Precast Concrete House our used lines meets after reinstallation by us the Definition RETROFIT ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobiltel.: +43-664-3358378 office@machines-plants.at www.machines-plants.at Affordable housing Low-cost housing - Hotels - housing estates - residential developments - residential areas & complexes – single housing – low cost housing Günstige Häuser - Low-Cost-Häuser, - Hotels - Wohnsiedlungen - Entwicklungen v. Wohngebiete und Komplexe - Einzelhäuser - preiswerte Wohnungen Cmodul-3D Austria we can offer NEW also C Module dim. 3000 mm x 6000 mm (c-module)NEW MOULDS Affordable houses - low cost living space Low cost housing I am proud to introduce now our improved system for the construction of affordable houses. S ...
used
- 1.2 m wide - approx. 2.75 m long - from 0.5 to 1.1 m upward
Technical data: intended purpose: Planks Achsabstand: 2 m rope number: 4 pieces impulse achievement: 4 kW chain division: 125 mms lax strength: 40 x 10 mms
Technical data: total length: 5.3 m boxing number: 5 pieces impulse: 1.5 kW conveyor height: 2,350 m
used
Powered role way with built-in Abziehquerfoerderer technical data: intended purpose: Boards length: 1 m rope number: 6 pieces impulse 1.5 kW
used
PE 300 plastic recycling and regranulation line was built in China in 2011 by Zhangjiagang Wuhe Machinery Co. LTD. The extruder for plastics used in the processing and manufacturing of various types of materials can produce up to 300 kg of parts in one hour of operation. The complete PE and PP plastic extrusion line includes a compactor, screw, cylinder, conveying system, heating system and temperature control panel. Material production begins by heating the plastic to a maximum temperature of 300°C in the 11 heating zones of the PE 300 granulating line, controlled by thermoregulators. The extruder then presses the material further through a 100 mm diameter screw located in a cylinder with abrasion and rust protection. At the end of the process, the machine head moulds the plastic to give it the right properties and shape. The PE 300 extruder is equipped with thermoregulators with ...
Purpose: Model + prefabricated wood Axle distance: 1,875 m Rank: 4 Power: 2.2 kW Chain division: 125 mm Tab thickness: 40x10 mm Takeaway distance: 2.25 m Transport by heavy laschenglieder chain with carrier and steel chain wheels, bearing housing made of steel, drive by special gear motor with overload slip clutch, deflection wheels individually clampable, with wear rails on the chain carriers, substructure in Profile steel construction, sloping transport.
used
FRECH DAK315H die casting machine manufactured in 1991 by the German company Oskar Frech Werkzeugbau GmbH + CO. KG. is designed for the production of castings by filling moulds with molten brass or aluminium. The reliable FRECH metal injection moulding machine with high-quality components works with casting moulds of a maximum height of 700 mm, which are closed with a force of up to 315 tonnes after being filled with molten material. Depending on the design of the choiceed mould, the aluminium die casting machine also allows for the use of an injection piston with a diameter of 40 to 80 mm. Previously, the machine used a piston with a diameter of 40 mm. The DAK315H aluminium die casting machine weighs approximately 14000 kg. Technical parameters of the FRECH DAK315H metal injection moulding machine - clamping force: 315 t (3150 kN) - injection force: 35 t (350 kN) - ejection for ...
Technical data: total length: 9.7 m boxing number: 5 pieces impulse: 1.5 kW conveyor height: 2,350 m
used
Axle distance: 9.0 m Strands: 5 stk (80/80/1,20/1,80), horizontal Used for: Boards/Schwarten Model Logs Design: horizontal Upgrade plated out 5 sprockets with special gear motor 5.5 hp
used
to German Institute for Standardization 6608 - outside with bitumen isolation. L = approx. 10.00 m / D = 2.00 m / weight approx. 6.0 to. / ex works, freely charged. the container is used, emptied inside and cleaned. The container was amended in our work from the outside and was postisolated with bitumen mass. Nevertheless, insulating damages by transport can exist in the container.
used
Hello I will sell a powerful chipper of the American brand Rotochopper model MC-166 Engine from a reputable company CAT 3406 - 360 HP. The chipper, despite its age and appearance, is fully functional. Its strong advantage is a very simple construction. It does not require complicated service for simple repairs. The same applies to the operation, which is highly intuitive. Drum-knife chipper for very diverse needs: - Wood, whole logs. - Various types of wood waste - tree trunks, stumps -Cuts - Pallets (It has a magnetic roller that captures metal) - blocks, waste - and many others Capacity approx. 90 m3/h depending on material, operator efficiency, type of material and screens. It has a mounted magnetic wheel that will allow you to get rid of metal parts from the material. It is possible to install different sizes of sieves depending on the needs. The wide hopper ...
used
Technical data: Roll width: 800mm Roll diameter: 152mm Length: 9700mm Roll spacing: 800mm Power: 2.2 KW Accessories: Abort ingenurole (right) Lifting and sinks counter-rotating thread roller for max. wood length 7.0m, threaded roller is located 2.5 m before the roller aisle end
used
Used Marel Townsend THV 400-E65 former is designed to streamline the process of shaping and producing burgers with a different size or quantity and various shapes. Townsend former employ advanced technology and automation to mold the ground meat or plant-based mixture into consistent and uniform shapes. It feature adjustable mould variations, allowing for customization of diameter, and weight according to specific requirements. In set with loading for 200l meat bins and lots of new original spare parts. Whole construction is made of stainless steel and food approved plastic which guarantees the ease of maintenance and the highest hygiene at work. Square moulds dimensions: 90 x 115mm, 77 x 110mm, 80 x 110, 90mm x 115mm Oval moulds diameter: 40mm, 50mm, 115mm Dimensions: 2400 x 1000 x H2200mm Max height with loading: 3300mm
used
for the production of products cast in moulds, such as chocolate bars, bars, etc. Accessories unit for SELMI Temper TOP EX only 1 year in production
used
American stove Heartland 6120EC original Stove ran only a short time because of moving to new apartment, it could not mitnehemen, me is unfortunately necessary to separate. Is stored Electric 400V hobs, oven and keep warm compartment New price at 7500 € Appointment for viewing by phone or by mail. When the load is helped. Private sale no returns
Line is equipped with the following: • 25 ton EAF w/356mm electrode & 16 MVA trsfmr (rblt 2006) • 25 ton LF w/305mm electrode & 3 MVA trsfmr new 2006 • 25 ton VOD/VAD w/305mm electrode & 3 MVA trsfmr23297 • 2-Strand VAI Caster new 1990's: Hand & Auto Controls 6 ton tundish (ladle) movable crystalizer electromagnetic stirrer • 8 ton ESR (2 pillars) w/4MVA transformer will produce 1 to 10 ton ingots • Dust collection system • 12.5 ton charging cranes • 50 ton ladle cranes • 12.5 ton service cranes • ingot moulds • ladles
used
Meat processing equipment from a modern German butcher's shop for sale. The equipment consists of: • Seydelmann AD 114 automatic grinder • Kilia Meister Plus 50, 50 liters bowl cutter with variable knife speed • Vemag Robby Typ 136 vacuum filling machine with casing holding device • Poly Clip SCD 7095 clipping machine • Stiller can seaming machine DV 10 PS • Maja SA 85 S ice generator • Vakona ESK 125 Tumbler • Stein smoke house • scales, slicers, moulds, stainless steel tables If desired we can arrange worldwide delivery and send our German master butcher to instruct your staff on-site.
Sidel SBO 20 Universal Aseptic Bottling line - Capacity: up to 40.000 bph by 500 ml / 28.000 bph by 1500 ml Products: fruit juices Bottle formats: 200 ml, 500 ml, 1500 ml, 1750 ml Year of manufacturing: 2011 consisting of: 1. SIDEL SBO 20 Universal PET blowing machine, year of manufacturing: 2011 composed of: – preform tipper – preform hopper, unscrambler and infeed rail – Sidel ARS system HP air low consumption – Eco2 oven with 20 heating modules for 38 neck – blowing station for 20 quick change shell molds, – Compressor ABC 4HP-4-LT complete but without cooling tower moulds are not included 2. Sidel Rafale air conveyor system from exit Sidel blower to entry Sidel aseptic filler with curves etc – length approx. 250 meters also with full automation & drive and electrical panels. 3. Sidel Sensofill FMA 80/24K BS 13 aseptic tribloc, composed o ...
used
Waelz piston pump (roots blow- Manufacturer: Pfeiffer Type: WKP 1000 suction moulds: approx. 1000 m3/h Status: As new in original packaging Gewaehrleitung: 12 months from delivery Zubehoer: User Manual; Spare parts list Further accessories by arrangement; ready for use
used
For sale complete line for plastic caps, include: 1. CCM48 with moulds and CVS 2. cooling system 3. slitting machine Perfect condition. Working at moment. Origin Italy.
Pos.1 Buffer conveyor belts for layer formation for 4 frieze lengths Pos.2 Gantry stacking system Pos.3 Parcel roller conveyors in the area of gantry systems Pos.4 Security technology Pos.5 Machine control Pos.6 Intermediate strip automatic The mechanization is designed for the following workpiece dimensions: Length: 320 - 1000 mm Width: 56 - 120 mm Thickness: 20 - 40 mm Stack Dimensions: Length: 400 - 1000 mm (double lengths up to 2 x 520mm) Width up to: 1200 mm Height up to: 1200 mm Stacking is carried out on Euro pallets Max. output: max 40 parts/min or max 4 layers/min (board or batten layer!) Pos.1 Buffer conveyor belts for layer formation for 4 frieze lengths Quantity: 4 pieces Length: 2600 mm each Usable width: 800 mm each Propulsion: Spur gear motor Conveying speed: 15 m/min Incl. side guide rulers and layer alignment (One layer is formed, ...
Technical data: with driven rollers Roll width: 1,200 mm Wide lifting table 1,400 mm Length lifting table: 3,350 mm Height retracted: 900mm Max lifting weight: 5 to Lifting height: 1,000 mm Platform size (length x width) With built-up roller movement: Roll length: Roll diameter: 164mm Roll spacing: 640mm
used
Waelzpistongeblaese Manufacturer: Leybold Type: RUVAC WSU 2001 Cat No.: 11741 Suction moulds: approx. 2000m3/h Status: Generalueberholt Gewastperformance: 12 months (similar); ready for use
new
Six ABB 9100kVA (11kV 440V 720rpm 60Hz) synchronous generators plus six Unitrol 1020 AVRs. 2015 year of manufacture. Zero running hours after FAT. Designed and built for an offshore marine vessel, construction of which did not proceed. Necessary mechanical power for driving equipment approx. 7,5MW The following documentation is available and can be provided to interested parties upon request. - Technical specification, GA, and other drawings and documentation - American Bureau of Shipping (ABS) approval documentation - 2015 FAT reports witnessed by ABS - 2021 ABB inspection reports concluding the generators are in good internal condition The equipment is stored in the Vaasa area of Finland and is offered EXW under INCOTERMS 2020 on an as is, where is basis. Arrangements can be made for inspection. Wärtsilä Finland Oy has and can demonstrate clear title to the ...
used
Waelz piston pump (roots blow- Manufacturer: Pfeiffer Type: WKP 500 A Suction moulds: approx. 500 m3/h Cat. Nr.: PP W31 001 Status: Generalueberholt Gewaehrleitung: 12 months Including: oil filling, operating instructions; ready to use
new
Manufacturer: CATERPILLAR Type: V 250 Capacity: 12000 kg Lift Height: 3710mm Boom height: to insert moulds of fork length: 1400mm width: 2550mm Overall length: 6400mm; ready for operation
used
rondolloti spinning lathe type 1301 GM sold with moulds loaded
used
1993 model husky xl 300 pet injection engine (full revision) 1997 model Piovan raw material dryer 1999 model Fasti mold drier Robot and conveyor Some pet preform moulds ( New ) Full automatic, in excellent condition
Technical data: Length: 1.0 m Stanganzahl: 4 St Drive: 4,0 KW
used
Technical data: Roll width: 1200 mm Length: 27 m Roll diameter: 168 mm Roller spacing: 800 mm Cut-outs: 5 PCs. Switching flag: 1 PCs. Power: 4,0 KW With built-in honing cross conveyor: Distance: 2.99 m Line number: 5 line Drive 2,2 KW
used
Offer Centrifuge SZB0 1000C 960 1/min 6 loads/h for separation of Plastiso and Parex Photo 1-9 The centrifuge was part of a wallpaper production line. After cleaning the tools, it is used to separate the plastisol from the parex. Manufacturer: VEB Chemieanlagenbau Staßfurt Maschinfabrick Sangerhausen Type: SZB0 1000C Ref. 5604 Year of construction: 1986 Speed: 960 1/min Load: 145 kg Internal volume of the drum: estimated 200 liters Max clearance: 6 loads/h Power supply: 380V 3~ 50 Hz 5.5kW Weight: 1660kg Condition: used, stored, worked until siling and on 7 Paint mixing buckets Mixing tank Agitator tank Drais 300 l Photo 10-12 The paint mixing buckets were part of a wallpaper production plant in Halle and were used as accessories to the Drais paint mixing plant type RN 218 (sold). Technical data (partly estimated or from comparison plants): Manufacturer: ...
used
Offer Forklift STILL EFG 1.5 o. R50 3 Wheeled forklift Trplex approx. 4 m lifting height with charger Picture 1-8 The forklift truck is being relocated from another location due to a business change and is now being sold at our customer's site. So far, it is ready for operation and working. It was still used from time to time. The nameplate is not legible. Data partly taken from comparable types from our exploitation. The forklift is still in use intermittently. Manufacturer: Still Type: verm EFG 1.5 or R 50 1.5 Tricycle Forklift No. 50148424? Year of construction: unknown older Hours: 60848 Load capacity: 1500 kg UVV: no needs to be renewed Technical and visual condition: ready for use, severe signs of wear, UVV no needs to be replaced, see photos Length: approx. 1700 mm Width: approx. 1000 mm Height: approx. 1930 mm Tyres: good Mast Type: Triplex Lifting ...