ame moulds used for sale

Tube mill production line 76x3mm (A3757) Make: Italy Year: 2007 overhauled metal thickness: 0.8-3.0mm maximum pipe diameter – 76mm Line includes 19 moulds for different pipe diameters production Round pipe: 48,42,60,75 L type: 30×30, 38×38, Half round pipe: 45, 60 Oval pipe size: 60, 20×38 Rectangular pipe sizes: 30×30, 40×40, 40×20, 20×38, 30×40, 60×40, 70×30, 80×40, 60×60

KVM 125/105 Block/Paving Plant complete 1999 NEW PRICE! KVM PLC control, Curing Rack System. Finger car systems. Elevator system 10 levels, Coloring system. 2 Moulds, Palletizer system, Skako 1125 L batching plant complete. Plant is in good condition and was shut down in 2020. The plant can be seen after appointment. We can assist with dismantling, packing and shipping. Amexpo Consult, Merkurvej 31, 9370 Hals Denmark. +45 29251017

KVM 62/80 Pavingstone machine, 2005. Hydraulic Powerpack, KVM PLC Control, Pallet size 900 x 750, Moulds. Machine was shut down in 2010 due to a merger between 2 companies. The machine has only been in operation for 5 years and is in very good condition. PRICE INCLUDES DISMANTLING. Amexpo Consult Merkurvej 31, 9370 Hals Denmark +45 29251017

General Fully automated concrete pipe factory. Pipes are produced with self compacting concrete (‘wet cast’) which makes the operation labour friendly (low noise and no vibration) and gives state of the art products: every pipe has exactly the size, with a flat surface and is very easy to install by constructors. Video`s is available upon request. Plant can be seen after appointment, Amexpo Consult Merkurvej 31, 9370 Hals Denmark +45 29251017

BEING NEGOTIATED Sumitomo Demag 280 ton Systec SP 280/630-840 year of manufacture 2014 280 Ton Clamp 2800kn Tie Bar Dist 630 Injection unit 840 Made in Schwaig, Germany 400v 50hz Exworks South America

Specifications: Master and model inserts Length: 6.5 m Width: 2.3 m Number of lifting arms: 4 - heavy insertion arms - with built-in tapered rollers - Substructure in heavy steel construction - built-in roller rails - 4 strands with roller rails Condition as new, with functional review, to the exclusion of any Warranty

Case erector OMA hot melt – mod. AC 1000 HM Year: 2016 Speed: 2.000 cases/hour Machine suitable for american cartons Gluer Nordson Control panel with PLC and touch screen Safety protections CE

Specifications: Master and model inserts Length: 5.7 m Width : 1,7 m Number of lifting arms 5 - heavy insertion arms - Substructure in heavy steel construction - built-in roller rails - 5 strands with roller rails Condition as new, with functional review, under exclusion of any warranty

Box forming machine EUROTEMA - FC-2000HM Year: 1997. Speed: 2.000 cartoni/ora. Model: FC-2000HM. Type of box: American. Closure system hot-melt. Safety protections.

Box monoblock TMG Year: 1999. Speed: 2.500 bph. Box forming machine - American carton Case packer - 6 heads Box closing machine – hot glue Safety protections

bottling line AVE - 2005 speed: 2.500 bph for sparkling wine 3.000 bph for still wine. Depalletizer GP ENGINEERING mod. COMPACT 52 Filling monoblock isobaric AVE 24.24.6: Rinser 24 clamps single treatment - fixed nozzle Filler 24 valves with pre-evacuation and self-leveling Corker 6 head natural straight cork and mushroom cork. Caps orientator AVE Bottle washer/dryer CAMES mod. W DT 3/8 Capsuling machine ROBINO & GALANDRINO mod. FENIX 2 suitable for pvc and polylaminate capsules Labeller AVE adhesive and cold glue mod. 12T 4S 4E suitable to apply: Front label and back label (adhesive and cold glue). Packing monoblock GP ENGINEERING mod. ISOLA 700: Box forming machine - american box Case packer single head with adjustable head Hives inserter AVE Box closing machine above and below hot glue AVE Palletizer GP ENGINEERING mod. PABR 50 Wrap pallets semiautomatic AVE Le ...

Bottling line BARDI – 19LT PET Speed: 450 bph. PREFORMS tipper GENIUS – 2007. Blowing machine SIAPI (1 cavity) – 2007: Nr. 3 moulds: 10 LT – 15 LT – 18.9 LT. Filling monoblock BARDI – 2007. 3 bells for filters – PALL. Robot with interlayer and pallet magazine ACMI – 2010. Label marker and applicator for pallets VIDEOJET – 2016. Compressor 40 bar SIAD – 2007. Air tank 40 bar MTA – 2007. Dryer MTA – 2007. Chiller PIOVAN – 2007. Evaporation tower B.A.C. Bottle conveyor belts included. Various spare parts available.

- X: 1050 mm - Y: 600 mm - Z: 600 mm - Table size: 1150 x 600 mm - Speed range: 8,000 rpm - Spindle holder: BT 40 - IKZ: 20 bar - WZ changer: 24-fold - Control: Fanuc 0i-MD - Switch-on hours: 31575 h - Program run: 8510 h - Total power: 40 kW - Machine weight: 7,200 kg - Space requirements (W x D x H): 4.0 x 2.2 x 2.7 m - Condition: very good Details Filter system with cooler AME HSP 350, paper belt filter, coolant reservoir 2270 l; chip conveyor AME SB 200, without the vices shown Accessories Measuring probe, documentation, 1 piece holder, extraction

FERROMATIK MILACRON EUROPE ELEKTRA 300 injection moulding machine was built in Germany in 2000. The machine produces high-quality plastic products using the injection moulding method. The plastic is fed into plate-mounted injection moulds with a height of 200 to 670 mm, and then welded with a force of 300 tonnes to produce items with the right shape and properties. The FERROMATIK MILACRON E300-S injection moulding machine is equipped with, among others, a large screw with a diameter of 60 mm and an operator panel located on the body of the machine with a FERROMATIK MILACRON IQT 33 CNC controller installed, allowing full control of all process parameters and programming of operating modes. The total weight of the FERROMATIK MILACRON ELEKTRA 300 S injection moulding machine is 17460 kg. Technical parameters of the FERROMATIK MILACRON EUROPE ELEKTRA 300 injection moulding machine - c ...

FERROMATIK MILACRON ELEKTRA 155 injection moulding machine, manufactured in 2003 in Germany, is used in the processing of thermoplastics by injection moulding. The robust steel construction is equipped with first-class components, characterised by high reliability and performance. The FERROMATIK MILACRON EE155 machine works with injection moulds with a height between 200 and 590 mm, which are mounted on 780 x 780 mm platens and closed with a force of up to 155 tonnes. The combination of the high closing force with a 45 mm diameter screw, rotating at 250 rpm, guarantees the best quality of the produced products. The total weight of the injection moulding machine is 7800 kg. Technical parameters of the FERROMATIK MILACRON ELEKTRA 155 injection moulding machine - clamping force: 155 t (1550 kN) - screw diameter: 45 mm - maximum screw speed: 250 rpm - screw stroke: 200 mm - mould ...

-Release agent spraying system for bread baking tins -Grease baking tins -Grease box moulds

PONAR ŻYWIEC UT-090 H injection moulding machine was manufactured in 2001 in Poland. The machine, designed for plastic injection moulding, is equipped with high-end components, increasing productivity and ensuring high reliability. Located on the body of the injection moulding machine, an operator’s panel with an installed MOOG-BUHL CNC controller allows for complete automation of the injection process and control of parameters. Moulds with a minimum height of 225 mm, mounted on 615 x 615 mm platens, are closed with a force of 90 tonnes by a hydraulic clamping unit protected by fixed and movable guards. The combination of the high clamping force of the mould, together with a powerful screw with a diameter of 30 mm, guarantees the best quality of the manufactured products. The extensive equipment offered with the UT 090 H injection moulding machine includes a pneumatic plastic feede ...

Machine Details Stock-No. 1105-03789 Type of machine Machining Center - Vertical Make CINCINNATI Type sabre 1250 Year of manufacture 1995 Type of control CNC Storage location HAGUENAU Country of origin UK Delivery time immediatly Freight basis FOT Technical details X-Travel 1270 mm Y-Travel 762 mm Z-Travel 820 mm spindle 11 kW spindle turning speed range 60-8,000 rpm toolpiece magazine: chain magazine 21 pieces tool taper DIN 69871 ISO 40 table-size 1,370 x 760 mm control fanuc om total power requirement 30 kVA weight of the machine approx. 9 t Additional information FANUC OM Technical details and information subject to amendments and errors.

LINE FOR FILLING EDIBLE OIL IN 1,0 LTR. PET BOTTLES Capacity: 6,000 hph x 1.0 L conisting of: Blower KOSME KSB 3000 – 2001. – 2 pcs x 3,900 fph Box for preforms with transport to the blower Compressor for cooling moulds MTA S.R.L. - 2000 KOSME bottle air conveyor – 1999 AISI 304 stainless steel Electrical control cabinet with PLC Built-in air filters It transports bottles from blower to filler Filler and capper – ICS-Slovenia - 1995 – 6,000 L/h Labeller ICS – 1995 – paper labels, cold glue Conveyor belts ICS – 1995 Packer in transport boxes 3x5 bottles – ICS – 1995 Shrink wrapper SMIPACK-packer in foil 2x5 bottles – 2013 Pallet wrapper ZLATOROG-Slovenia – 1999 KAESER low and high pressure compressors – 2000 Refrigeration dryer There are spare parts worth approx. 30.000.- EUR It has complete technical documentation Required space for eq ...

Multivac T200 traysealer, New condition!, - 2 moulds available (dimensions in photos), - Trays available, - Busch pump build in, - Pump only has 60 production hours, - Spare parts included, - Manuals included, -

American can sealer 4 heads for 4 diameters. From Coca Cola small cans until 20 cm diameter High up to 45 cm high This machine was used with the following size r=10 cm, h= 18,2 cm for 500 gr of roast coffee. Shipping possible IMPORTANT: Watch out for scams happening on Resale: don't reply emails that are not coming from the seller especially those offering a discount from the advertised price without previous discussion, don't do open requests on resale because everybody will see your data and this is where the scam is starting, try to speak with the seller by phone before purchasing, always verify that bank details are matching with the invoicing company and VAT number, reports any email looking like this: "we can offer you a 20% discount due to stock streamlining.") Copy paste this URL link to see the machines listing: abcs://abc.resale.info/angebotelink-user.php?myid=56090 ...

ENGEL ES 330/80 HL injection moulding machine was built in Austria in 1995. A highly reliable and efficient machine equipped with high-end components, is used in the processing of plastics by injection moulding. The combination of high mould clamping force and a powerful screw with a diameter of 35 mm guarantees the high quality of the manufactured products. The injection moulding machine works with injection moulds with a height from 170 to 370 mm, which placed on 710 x 660 mm platens are closed with a force of 80 tonnes. The machine is equipped with an ENGEL CC100 CNC controller for setting injection moulding process parameters, an ENGEL ERC 23/1-CH servo-driven multi-axis robot and a pneumatic and hydraulic core. The tie-bar-less injection moulding machine weighs 5300 kg. Technical specifications for the ENGEL ES 330/80 HL injection moulding machine - maximum clamping force: 80 ...

1 of used, combined canning and bottling line for beer or soft drinks, new 2016. Consists of the following equipment: - Semi-automatic, high-level, sweep-off, bulk can depalletizer, make COMAC. - Gravity can twist-rinser, make Eurosistemi, type GRV. This is a twin lane unit for 330- and 400/500-ml cans. - Can filler/seamer, make Comac, type Pegasus 8/1M. Output: 3,500 cph x 330ml (202/211 lid/body). - Vacuum Barrier Corporation liquid nitrogen dosing system for cans. - Level detector/rejector, make FT Systems. Checks for under- and overfills. - Assorted can and bottle conveyors. - VFDs for conveyor motors (control panel itself not available). - Self-adhesive labeller, make BRB, type MEGA ADE 622, 2 label stations (front/back wrap-around), rated at up to 4,000 cph / bph. - Semi-automatic carbonator/nitrogenator. Skid-mounted unit complete with stainless steel control panel, m ...

Multi-spindle Gundrilling Machine Manufacturer: Mollart Type: Omnisprint YOM: 2000 Serial number: A438-0700 CNC Control: GE-Fanuc 18 M 2 Spindles Min-Max drilling diameter: 3-12 mm Max Drilling depth: 500 mm X axis cross travel: 500 mm Y axis vertical travel: 250 mm Z axis travel: 800 mm Spindle centre distance: 250 mm X-axis rapid traverse speed: 10 m/min Y-axis rapid traverse speed: 4 m/min Z-axis rapid traverse speed: 10 m/min Work table dimensions: 600x600 mm Spindle centre height from table: min 117 max 377 Max weight on table: 680 Kgs A.C. Spindle motor power: 3.7 KW Spindle speed range: 0-10,500 rpm Drill feed range (infinitely variable): 0 mm-4.000 rpm Feed motor torque (continuous): 5.9 Nm Weight of the machine: 4500 kg Weight of the coolant system (dry): 1000 kg Coolant ...

Used / cleaned CNC lathe with different clamping axes. Tools on the moulds are not included. Optical tool measurement. Optional instruction manual available.

planing width: 520 mm; planing shaft type: tersa; number of blades: 4; sourface table length: 3000 mm; table adjustment: electrically; read out table height: digital; sourface fence adjustable: yes; motor power: 7 kW; suction connection: 120 mm; machine length: 3005 mm; machine width: 1460 mm; weight: 870 kg; - Dressing tables made of gray cast iron - The dressing table adjustment takes place via a precise parallelogram system, so that the distance between the table tips and - - the knife shaft remains the same in every adjustment position - Large precision aluminium dressing fence, slightly tiltable 90 - 45 ° - The inclination of the stop is easily readable from the operator side - As standard with auxiliary stop for safe planing of even narrow workpieces - Large four-knife shaft, precision-mounted - Quiet running with precision aggregate and heavy cast iron execution -  ...

Used stuffing machine Edhard MKVX Edhard machines are used for dispensing all kinds of masses for doughnuts, croissants, cookies, moulds, etc. The mass can be changed in an instant by changing the hopper. The masses inserted into the hopper are dosed by means of an electric motor controlled by an electronic panel on which the portion size is set. Thanks to the electronic control, the machine feeds the portions with a very high degree of accuracy, thanks to which we obtain a high quality and repeatability of the final product. Technical data: machine dimensions (W x L x H): 391 x 229 x 241 mm installed power: 1/4 Hp voltage: 220/240 V/50 Hz weight: 5.5 kg hopper 17l 2 needles for stuffing doughnuts.

Workpiece diameter: 2750 mm Distance between centers: 1375 mm Number of rolls: 1   CNC Spinning machine with LEICO Play-Back control Large package pressing moulds tailstock Floorplate construction carriage Large package with moulds in diameter: Ø  950 Ø1250 Ø1270 Ø1375 Ø1300 Ø1400 Ø1500 Ø1600 Ø1900 Max. product  over bed:2400 Max. product  in de zak:2750Ø Centerhoogte over bed: 1200mm Afstand tussen centers:1375mm Max. plaatdikte:       6mm Hub X-Achse:           1400mm Toerental:             850Rpm Slag pinole quil:      750mm Lengte:                6500mm Breedte:               5200mm Hoogte:                2600m ...

ENGEL ES 200/75 HL-V injection moulding machine was built in Austria in 2000. The highly reliable and robust machine is designed for processing plastics by injection moulding. The high-end components installed on the ENGEL ES 200/75 HL V injection moulding machine guarantee a significant increase in work efficiency and productivity. The machine operating with a force of 75 tonnes works with injection moulds of a minimum height of 200 mm, which are placed on 660 x 560 mm platens. All process parameters are programmed and controlled on the convenient and intuitive ENGEL CNC control, located on the body of the plastics processing machine. The total weight of the machine is 4700 kg. Technical specifications of the ENGEL ES 200/75 HL-V injection moulding machine - CNC control: ENGEL - clamping force: 75 t - injection volume: 135 cm3 - injection pressure: 1065 bar - injection speed: ...

PET stretch blow molder with 4 cavities, capacity up to 5,500 bottles per hour at 1 ltr bottle size 2 ltr. Spare parts, blow moulds and neck spare parts can be purchased optionally. The machine was overhauled by Flexblow and various new parts were installed. Siemens control system with English operating language. Machine already dismantled and stored

SIDEL SBO 6/10 series 1 PET blow-moulding machine for 6 moulds Linear oven with 10 modules Capacity 7.200 bph, equipped for quick change moulds Personalization for preform neck 29/25 Machine supplied with preforms hopper, unscrambler and infeed rail Sidel electrical panel, PCC drive and control panel Huge set of spare parts valued at 30.000€ included Dismantled february 2023 and stored in our warehouse. Excellent machine with low working hours. Very attractive pricing. Available immediately

working width: 950 mm; min. workpiece height: 4 mm; max. workpiece height: 170 mm; height adjustment: electrically; read out height: digital; electronic control: Fox 500 KTR; aggregates: 1; 1. aggregat: Combination unit for calibrating and sanding / Slant-grooved steel roller Ø 120 mm with height fine adjustment / Hard sanding pad with graphite pad; dust brush: no; motor power: 7,5 kW; suction connection: 140 mm; machine length: 1388 mm; machine width: 1545 mm; machine height: 1668 mm; weight: 660 kg; - Also for smaller craft shops for occasional use - Combination sanding unit with sanding shoe for fine sanding - Standard with diagonally grooved steel roller Ø 120 mm for calibration - Fine adjustment of the working height - Clear control panel on the front - Robust tube-stiffened monobloc steel machine body, robot welded, high-mounted working units for maximum rigid ...

Feeder opening: 760mm x 570mm; Funnel Contents: Throughput : Material and screen dependent; Rotor diameter: 240 mm ; Rotor length: 350 mm; Blades: 12 knives on the rotor + 2x knives on the side; Knife size: 30mm x 30mm; sieve blockage: 25mm; hydraulic moving floor: Yes; Suction nozzle: 160mm; Power consumption: 6 kW; Noise level: 90 dB (A); Dimensions: 1,250 mm x 900 mm x 1450mm (L x W x H); Weight: 600 kg; Engine kW 5.5 IE2 (High Efficiency); Hydraulic power kW 0.5; Total installed power kW 6. Dimensions: H 1.450 mm x 1.250 mm x 900 mm. Kg 600. loading opening: 760 mm x 570 mm; rotor: à ̃ 240 mm x 350 mm; working width: 350 mm. N 12x knives (central) + 2x knives (side); knife 30 mm x 30 mm with hollow side, screwed with conical screw for better fastening; N 1x grid supplied, sieve to choose between à ̃ 12mm and à ̃ 25 mm. With ABB inverter to control worker mo ...

ZENITH 844 paving plant with face mix device and packacking line. Control Siemens PLC Simatic S5. Including 5 moulds. 4 paving/interlock moulds and 1 lawn edge kerbstone mould 1 Parolin/Wave mould 6 cm, 1 Unidekor mould 6 cm, 2 Rectangular moulds 8 cm, 1 lawn edge kerbstone mould. See Mould list in photos. 300 steel production boards Plant is in very good, well-maintained condition.

Key data: 510 mm, 510 mm, 510 mm

Machine Details Stock-No. 1105-03907 Type of machine Machining Center - Vertical Make MORI SEIKI Type CV 500 Year of manufacture 1998 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Japan Delivery time CALL ME Freight basis EXW (Incoterms 2010) loaded on Technical details X-Travel 510 mm Y-Travel 510 mm Z-Travel 510 mm control MSC 803 number of spindle speeds 8000 spindle drive 7.5 kW Rapid Travel X/Y/Z 42/32 mm/min table-size 750 X 550 mm tool changing time 1.5 sec tool magazine: 25 BT 40 total power requirement 51 kW Weight of the machine approx. 4 t Accessories Memory 640 m Helical Interpolation Cylinder interpolation Additional information ROTARY DOUBLE TABLE CNC MSG 803 Technical details and information subject to amendments and errors.

unused machine. Was set up at the customer's site at the end of 2021, some samples were run and then the machine was never used again. Extruder 70/24D, single head, nozzle up to 120 mm. B&R control. All movements proportionally controlled. With waste and bottle conveyor. Optional moulds for 1-tr and 0.5 litre round bottles available

spindle tilting: + 45,5° bis -45,5° ; height adjustment: electrically; tilting adjustment: electrically; fence adjustment: electrically ; altitude display: digital; swivel angel display: digital; fence display: digital; spindle: MK 5; speeds: stepless 900 †12000min¯¹; power consuption: 7,5 kw; motor brake: yes, automatically; suction connection: 3 x 100 mm, 1 x 120 mm; machine length: 2540 mm; machine width: 1195 mm; weight: 950 kg; Highly stable steel gray cast iron construction Large work table made of gray cast iron Electric spindle drive 7.5 kW with maintenance-free direct drive guarantees maximum precision through maximum smoothness Maximum power is already available from 3400 min¹ Precision aggregates and high own weight Rapid table insert, infinitely manually adjustable to tool diameter (optionally electronically positionable) Standard with righ ...

Tartellette machine / floor punching machine Peerless Model: OMatic Floor-standing machine with 5 moulds Machine with adjustable step heating for punching head. For molds: Upper diameter: 120 mm Bottom diameter: 115 mm Height: 20 mm Mass: Width: 800 mm Depth: 800 mm Height: 1900 mm Condition: very good, mechanically tested, ex service

Machine Details Stock-No. 1105-03929 Type of machine Bed Type Milling Machine - Universal Make KIHEUNG Type KNC U 650 Year of manufacture 1999 Type of control CNC Storage location FRANCE Country of origin Spain Delivery time on inquiry Freight basis ex location Technical details x-travel 1400 mm Y-Travel 650 mm Z-Travel 705 mm table-size 1700 X 650 mm T-slots 4 T-slot - width 18 mm taper ISO 50 turning speeds 20-3000 rpm Spindle motor 20 kW Feed 2- 5000 mm/min Rapid traverse: 11 mm/min table load 2500 Kg control HEIDENHAIN TNC-430 weight of the machine approx. 10 t dimensions of the machine approx. 4389 x 2.7 x 2.4 m Additional information manual milling head hydraulic tool clamping CNC CONTROL HEIDENHAIN TNC 430 VERY NICE LIKE NEW Technical details and information subject to amendments and errors. 2023 Created with ModulMWS by LogoTech oHG

Product number: 2704EG Type: PFM-12 Serial number: 171 Capacity: 20 - 65 strokes/min. Forming width: 12", 30.54 cm Hopper: 500 Lbs. / 226 kg Belt width: 380 mm Compressed air: 7 Bar, 140 l/min. Power: 3 x 460V, 60Hz, 17kW Dimensions: 2950 x 1100 x 2050 mm Weight: 1950 kg With Tender-Form and paperfeed interleaver. Including various parts and moulds.

Equipped for ALU/PVC and ALU/ALU operation • Blister format range (W x L) min. 50 x 22 mm / max. 156 x 115 mm • Drawing depth max. 12 mm • Capacity 15 - 50 mould cycles/min • Transport length 42-115 mm • Film width 100-168 mm • Moulded foil Ø max. 450 mm, core Ø 76 mm (PVC) / 150 mm (ALU), pneumatic clamps • Cover film Ø max. 240mm, core Ø 76 mm, pneumatic clamp • Glue joint detection for moulded and sealing film • Product feeder Uhlmann SimTab 2.1 for tablets/capsules • Feed according to moulds and seals • Print image control with cover film stretching • Crack and pore control moulding film and cover film Visiotec VisioScan MT-160/200 • Forming station with compressed air for PVC molding film • Heating station with suction for the use of PVDC foil • Mechanical forming station for ALU moulded foil • Contents control VisioChrom color wit ...

Loypack One shot chocolate depositor Stainless one shot moulding machine, 100Kg twin hopper, moulds are loaded into a denester, adjustable temp control, variable speed, heated water tank, comes with over 300 different moulds for making neopolitans, 3Ph

Sell very long hand pallet truck / lifting forks 2500540mm Q max450kg

SIDEL type SBO 6 Serie 2 Year: 1999 Capacity: 7.800 bph Number of moulds:: 6 Equipped : quick change for shell molds Oven type : Sidel caterpillar oven Neck personalization: still mineral water 30/25 Working hours: low working hours Machine equipped with: Sidel preforms tipper Sidel preforms hopper & feeder Sidel electrical cabinet & PCC including HP compressor & chiller also Sidel air conveying system Equipment in good condition Available immediately

Induction Tilting Italimpianti FIM5 (FIM7 T CPU) and CPL / 5 in a very good working condition. Unit Specifications: - Power 7kva - 6.3kw. - Tilting Crucible with easy replacement. - Capacity approx. 5kg Gold. - Ability to melt gold, silver, copper, brass and alloys. - Graphite or Silicon Carbide crucible. - Manual tilting. - Maximum temperature 1350 degrees Celsius. - Metal stirring for proper sampling. - Flame in propane bottle to prevent oxidation in the metal. The price includes the Italimpianti specially adapted moulds which fit directly to the tilting unit in very good condition."

Electric motor, single-phase motor AEG Type: AMES 80 NY6R3 Y4 ( AMES80NY6R3Y4 ) 0,37 kW 890 rpm 220 V 1AC IP 54 shaft diameter: Ø 19 mm double pulley: Ø 86 / 66 mm x 10 mm spare part for STRAPEX strapping machine !, among others! used, tested ! Dimensions: 280 x 180 x 210 mm

Electric motor, three-phase motor -Power: 0.8 kW -Speed: 1440 rpm -Shaft diameter: 24 mm -Construction: B5 -Protection class: IP 33 -Dimensions: 310/200/H250 mm -Weight: 21.8 kg

Piston rod with piston, without seals ALLIED MACHINE & ENGINEERING CORP. (AMEC) Rod diameter: Ø 25 mm Piston diameter: Ø 40 mm Rod length: 660 mm Total length: 760 mm Rod thread: M16 x 2.0 unused ! Dimensions (package): 830 x 55 x 65 mm

Maintenance Unit SMC 1x AME250C-F03 ( Super Microfilter ) 1x AMF250C-F02 ( odor filter ) 1x AR30-F03-Y-B ( Modular Controller ) 0.5 - 8.5 bar used, tested ! Dimensions: 275 x 175 x 85 mm

Gear motor with brake SEW DFTZ71D4/BMG/TH/AME4 0,37 kW 10 rpm (counted) 400 V IP55 shaft diameter: Ø 30 mm as good as new ! Dimensions: 500 x 220 x 250 mm