ame moulds used for sale

Gear motor with brake SEW DFTZ71D4/BMG/TH/AME4 0,37 kW 10 rpm (counted) 400 V IP55 shaft diameter: Ø 30 mm as good as new ! Dimensions: 500 x 220 x 250 mm

Machine has been produced by Baykal Bursa Cutting area : 4000 mm x 2000 mm KMT pump 100 HP American made KMT pump and cutting head Machine can change tools while it is working CNC and software made in Italy

Ferromatik Milacron Elektra EE110-300 Evolution from 2006 Control panel : Mosaic Working hours 79 488 h (03/03/2021) Screw diameter : 30 mm All the information are taken from the documentation of the manufacturer (attached in the pictures). Machine in good running condition. All electric machine. Moulds running on the machine are toy moulds running ABS parts. Machine spec sheets attached.

Gebr. Ground paver Fabr. Zenith 913, incl. 4 moulds for: Hollow block 49/17.5/17.5 cm, Hollow block 30/24/17.5 cm Hollow block stone 36/24/17.5 cm, hollow block stone 36/24/23.8 cm The machine runs on triangular rails, max. mold width is 131.5 cm, production area thus approx. 120 cm Production depth max. approx. 100 cm

Complete automatic PET bottling line with capacity of 10.000 b/h, with 2 sets of tools for bottling 0,5L and 1,5L. PET LINE -Tikves Winery- Spec. Equipment Producer Type Year of prod. Capacit. 1 Preforms transporters M. TANNER 1999 15.000p/h 2 BLOW MOULD KRONES- CONTIFORM KBM8 1999 10.000b/h 3 Chiller for moulds KKT-Kraus KLC-s 38 N 1999 38KWhr 4 Air transporter KRONES- 1999 5 Unscrambler LANFRANCHI L1ST 1997 12.000b/h 6 OZONER for rinsing water BERTOLASO OM1002 1997 7 Monoblok Rinser+Filler+ capper RINSER BERTOLASO NV 1R 10 1997 10.000b/h FILLER ORTMAN+HERBST HANSA B B56/8Z-144 1997 10.000b/h CAPPER ZALKIN PCO 1997 10.000b/h 8 Bottles transporters KETTNER 1997 9 MIKSER ORTMAN+HERBST 1978--- 2005-Refurb. 15.000l/h 10 LASER PRINTER ALMARK 880 11 Labeller KRONES CANMATIC- WRAP AROUND 2002 10.000b/h 12 PVC Packer BAUMER 1997 12.000b/h 13 ...

Qty. 1 Second-hand PET blowing and water filling line Mfc.: Tanner AG, SACMI, FT System, Krones & others Built: 2005-2013 Capacity: 12,000 bph on 1.5 L - Pack 3X2 16,200 bph on 0.5 L - Pack 4X3 16,200 bph on 0.35 L - 4X3 pack Product: Still and sparkling water Cap: 28 mm PCO 1881 Mould series: 3 sets of moulds for 0.35 L/0.5 L/1.5 L Note: The line is in production until the end of October 2023 Various new mechanical and electrical spare parts to the value of EUR 200 k are available with the line.

BFS SOUVERAEN Complete Concrete Pipe Plant DN 300 - DN 3600. Plant is from 2003. and is in very good condition The complete plant onsist of two production lines. DN 300 mm - DN 1200 mm, fully automatic Packerhead technology, and one double station semi automated for pipes up to 3600 mm and box culverts. Vibration technology. The package includes: 2 Steel cage machines, 5 Fork lifts, Tilter for box culverts, 2 Robotic handlers, overhead crane and a complete batching plant. The plant can be seen after appointment. The plant was shut down in 2018.. (Video clip is available) Amexpo Consult, Merkurvej 31, 9370 Hals Denmark Mobile: +45 29251017.

Extrusion line for blowing polymer films of type ABA, MODEL 2L800 Manufacturer RUIAN AOXIANG PACKAGING MACHINERY CO., LTD 2017 onwards Specifications 1. Film thickness: 0.01 - 0.1 mm; (Thickness: 8%) 2. Maximum film width: 800 mm 3. Recyclable materials: LDPE + CaCO3, PND + CaCO3, linear LDPE; CaCO3 content - maximum 40% 4. Maximum performance: 100 kg / h; 5. Dimensions (L x B x H): 6000 x 3700 x 6500 mm; 6. Weight: 4.5 t; 7. Main power: 70 kW; 8. Certification: CE European Compliance Certificate, SGS Independent Examination Certificate, National Compliance Certificate of China GB4455 Data sheet 1. Extruder (2 sets) 1.1 auger diameter: 55 mm 1.2 Ratio of length to diameter: 30: 1 1.3 Maximum screw rotation speed: 100 rpm. 1.4 Type of screw: mixed type, with a barrier 1.5 The material of the auger of the cylinder: 38CrMo (American certificate of protection of inventions  ...

This advanced packaging machine is designed to efficiently and precisely fill plastic or glass jars with bulk products. Made in the USA, this machine automates the entire packaging process, including jar retrieval, product dosing, membrane sealing, and cap tightening. With a production capacity of approximately 1500-2000 jars per hour, it is ideal for high-volume production. Heres a detailed overview of its functions: 1. Jar Retrieval: The machine features an automated system for handling both plastic and glass jars. Jars are picked from the supply and positioned for the filling process. 2. Product Dosing: Equipped with a highly accurate dosing system, this machine ensures precise filling of the jars with bulk products such as spices, coffee, tea, grains, or sugar. The dosing system can be adjusted to meet specific product weight or volume requirements. 3. Membrane Sealing: A ...

Jungheinrich Ant Load capacity 1500 kg Lifting height 3500 mm At call

MachineApplications: manufacture of paving, kerbs, concrete blocks for masonry, foundation, pillars, floor slabs, chimney stacks, gutters, roadway gutter covers. 1 Advantage: Powerful vibration provided by 2 electric motors Tamper head equipped with 2 vibration motorsSchneider Electric electrical control and command components Our wide range of moulds can ensure a diversified production. Reliable mechanical and hydraulic systems. Component parts from trusted pateners: Drive: electrical and hydraulic Operate: Mostly manual (commands executed automatically: stop vibration when reaching height, start/ stop exhaust line) Concrete mould supply: Mechanised with hydraulic control Optional equipment: ) Auxiliary equipment for the paving and kerb finishing (hopper and drawer) Production cycle automation Electrical panel with PLC + HMI + software Automatic elevator with product panels f ...

Rommelag Bottlepack 3012 Blow-Fill-Seal Machine (BFS) with moulds for nasal & eye drop bottles 5 ml. & 10 ml., 7-cavities (7x5 ml. & 7x10ml.), capacity up to 3.000 bottles per hour, includes granulate vacuum feeding system, cooling wáter recirculation sytem and miscellaneous spare parts, new Siemens touch screen control panel (HMI) in 2015.

Manufacturer: Multivac Model: Thermoforming Packaging Machine R 145 Multivac Thermoforming Packaging Machine Model: R 145 Frame length: 4000 mm Nominal machine width: 320 mm Mains voltage: 400 V Machine voltage internal: 400 V Year of construction: 2010 Bought in 2020, very neat condition. Purchased for product development Performance and Capacity: Number of tracks: 2 Number of rows: 1 Drawing depth: up to 70 mm, adjustable in 5 mm increments Tool spacing: approx. 2475-3050 mm Electrically driven F145 hoists for moulds (4-point suspension) and for seals (2-point suspension), opening width of 150 mm each for top foil holder and bottom foil holder F 22, 3" core diameter Edge strip winder RSW 22 for max. strip width 60 mm per side

max. wheel diameter: 1200 mm gear width: 350 mm max. module: 16 min. module: 0,5 max. workpiece diameter: 1400 mm table diameter: 1200 mm table hole: 300 mm control: Siemens 840D Powerline total power requirement: 75 kW weight of the machine ca.: 24 t dimensions of the machine ca.: 5x3x3,8 m Gleason-PFAUTER CNC gear shaping machine P 1200 S for the production of internally and externally cylindrical gears with internal and external teeth and other rolling profiles and moulds profiles and moulds that regularly occur on the cylindrical workpiece circumference and for the production of profiles in the single part process. Special version with hydraulic shaping head H1 SCOPE OF EQUIPMENT: - Basic machine P1200S, Siemens 840D Powerline (XP) - Hydraulic shaping head H1 - Signal light (3-colour) - Extended software for fault diagnosis - Telephone diagnosis system - Chip disposal through table b ...

ID2955 Key Maker Magic 1211 year/Year of construction 1984 Manhole finisher, 1 piece Magic 1211, with 2 Atlas 300 + 400 molds, 2 palisade molds, 1 built-in mold, 1 vibrator incl. FU, various base sleeves Shaft paver, 1 piece Magic 1211, with 2 pieces of moulds Atlas 300 + 400, 2 pieces of mould palisades, 1 piece of mould installed, 1 piece of vibrator incl. FU, various lower sleeves

Installed in roller table ame899 Distance between axles : 1.96 m Number of strands : 4 pieces Drive power : 2.2 kW - Can be integrated into driven roller conveyor - Transport of the cut material by link chain chain and screwed-on drivers - Driven by geared motor - Chain carrier made of profiled steel Year of construction 1979 Revision year 2014

Specifications: Wheelbase: 1.0 m Number of strands: 5 strands Propulsion: 2.2 KW

Lifting cross conveyor ame900 is installed in this roller table ame899 Length: 8m, 1600mm width, 4 kw motor drive - with ball-bearing rollers, mounted on Shape - Driven by a special geared motor - Position roller chain - Spring-actuated length compensation Furnishings - With 2 liftable support rollers to hold the cant - Fixed baffle wall

Number of arms: 3 pcs. max. lifting capacity: 2 t - with heavy-duty storage arms - Arm lift and adjustment by hydraulic cylinder - Substructure in heavy steel construction Year of construction 1979 Revision year 2014

turning diameter: 65 mm turning length: 150 mm control: Fanuc 32i-B Number of working hours: 11028 h chuck diameter: 250 mm turning speeds: 4000 U/min turret (x-stations): 14 VDI 30 Number of axles: 3 (X-Y-Z) St. turret (x-stations): 7 VDI 30 Number of axles: 2 (X-Z) St. c-axis: 0,001 ° y-Axis min./max.: +/-75 mm chip conveyor: Knoll 400 S-1/335 Bj. 2013 total power requirement: 18,5 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: 4,7 x 1,72 x 2,16 m driven tools: 7 Handling system: FMB Unirobot M-10iA 12-7P Bj. 2017 CNC universal lathe INDEX IT600, year of manufacture 2014 - The following accessories would be supplied: o 2-jaw chuck Schunk ROTA 2B 200 o approx. 40 sets of clamping jaws o Approx. 45 tool holders (1x driven), but without cutting tool holder/ cutting tool o Compact handling system FMB unirobot M-10iA-12-7P o 12x 7 pallets each for various blanks - The b ...

Cross conveyor (QFM) for logs and models Distance between axles : 5.0 m Number of strands: 3 pieces Drive power : 7.5kW - Transport by means of heavy link chains and steel sprockets - Steel bearing housing - Driven by a special geared motor - Swivel wheels can be clamped separately - Wear rails on chain carriers - Substructure: Sectional steel construction -uphill - with hipped roof drivers Year of construction 1979 Revision year 2014

Gebr. roller conveyor with built-in QFA Bearing No.: ame896 Make: Möhringer Year of construction: 2021 Machine number: ROGA M2101 QFA M2103 Drawing number: ROGA 24200621 QFA 14800266 Specifications Roll width: 1200 (mm) Length: 4,705 m Roll diameter: 168 (mm) Roller spacing: 800 (mm) Propulsion: 4.0 (kW) Cut-outs: 4 (pcs.) with built-in pull-off cross conveyor heavy Wheelbase: 1.56 (m) Number of strands: 4 strands Propulsion: 2.2 (kW)

Gebr. Roller conveyor Bearing No.: ame894 Make: Möhringer Year of construction: 2021 Machine number: M2102 Drawing number: 24200622 Specifications Roll width: 800 (mm) Length: 4.07 m Roll diameter: 168 (mm) Roller spacing: 800 (mm) Propulsion: 2.2 (kW)

Specifications: Wheelbase: 1.3 m Number of strands: 4 strands Propulsion: 2.0 KW

Gebr. roller conveyor with built-in QFA Bearing No.: ame893 Make: Möhringer Year of construction: 2021 Machine number: ROGA M2103 QFA M2105 Drawing number: ROGA 24200623 QFA 14800267 Specifications Roll width: 800 (mm) Length: 3.5 m Roll diameter: 168 (mm) Roller spacing: 800 (mm) Cut-outs: 4 (pcs.) with built-in pull-off cross conveyor Wheelbase: 1.16 (m) Number of strands: 4 strands Propulsion: 2.2 (kW)

Specifications: Width: 500 mm Length approx.: 5300 mm Make: Unknown Year of construction: 1977

Make: Kosme Type: KSB 4000 Year of construction: 2003 Capacity: approx. 4,000 bpm - incl. preform feeder - incl. compressor - incl. cooling - incl. 3 sets of blow moulds - Bottle outlet with air transport Only a few operating hours!

G 76 | CASE ERECTOR 3M-MATIC YEAR: 2003 SPEED: 14 PPM MODEL: 400CF/R TYPE: WITH ADHESIVE TAPE FOR AMERTICAN BOXES FORMATS: MINIMUM H 12 CM X LARG. 15 CM X LONG. 20 CM MAX H 50 CM X LARG.35 CM X LONG. 45 CM SAFETY PROTECTIONS

Spade drill bit holder, spade drill bit, drill bit, with cylindrical shank, spiral grooved, 3 pcs AMEC, ALLIED MACHINE & ENGINEERING 1x 26010H-25FM diameter: Ø 18 - 24 mm maximum drilling depth: 365 mm total length: 458,3 mm shaft diameter: Ø 25 mm, shaft length: 56 mm 1x 24025H-32FM diameter: Ø 30 - 35 mm maximum drilling depth: 187 mm total length: 290,2 mm shaft diameter: Ø 32 mm, shaft length: 60 mm 1x 24015H-25FM diameter: Ø 22 - 24 mm maximum drilling depth: 168 mm total length: 209.2 mm shaft diameter: Ø 25 mm, Shaft length: 56 mm used, tested ! Dimensions ( packaging ): 480 x 100 x 50 mm

Spade drill bit holder, spade drill bit, drill bit, with cylindrical shank, straight grooved, 3 pcs AMEC, ALLIED MACHINE & ENGINEERING 1x 27000S-20FM Diameter: Ø 13 - 17, 50 mm maximum drilling depth: 295 mm Overall length: 373.9 mm shaft diameter: Ø 20 mm, shaft length: 50 mm 1x 25030S-40FM diameter: Ø 36 - 47 mm maximum drilling depth: 349,3 mm Overall length: 471.6 mm shaft diameter: Ø 40 mm, shaft length: 70 mm 1x KARNASCH® 221020.03870.0155 diameter: Ø 15.5 - 17.5 mm maximum drilling depth: 387 mm Overall length: 466 mm shank diameter: Ø 20 mm, shaft length: 50 mm used, tested ! Dimensions ( packaging ): 500 x 100 x 50 mm

Spade drill bit cutting insert, 10 pieces AMEC, ALLIED MACHINE & ENGINEERING 3x 452H-32 diameter: Ø 32,0 mm Tip Angle: 132° 3x 450H-17.5 Diameter: Ø 17.5mm Tip angle: 132° 1x 450H-16 Diameter: Ø 16.0mm Tip Angle: 132° 2x 152T-26-FB Diameter: Ø 26.0mm Tip angle: 180° 1x 151T-24-FB Diameter: Ø 24.0mm Tip angle: 180° New ! Dimensions (packaging): 80 x 51 x 50 mm

Cream separator for warm milk skimming. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Separation of mixtures of liquids with different densities and simultaneuous elimination of solids (Three Phase Separation). Product: Fresh cows milk (≤ 48h from milking). Process temperature: 48°C - 58°C. Skimming efficiency, expressed in terms of the percentage of fat remaining in skimmed milk is 0,04 - 0,055% with the Röse-Gottlieb method or 0,03 - 0,05% with the Gerber method. Concentration of the cream is 25% to 45%. Feeding pressure (in): ± 1,5 bar. Skimmed milk pressure (out): ± 4 bar. Cream pressure (out): ± 2,5 bar., Milk skimming capacity: 7.000 liter per hour., Standardization capacity: 10.000 liter per hour., The new offered milk skimming separator comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, mad ...

Cream separator for warm whey skimming. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Separation of mixtures of liquids with different densities and simultaneuous elimination of solids (Three Phase Separation). This process separates the fat content in the whey (present is a small percentage, between 0,15% and 0,70%). It is simpler as the milk proces, if there are low curd fines. The whey should be filtered before entering the separator. Process temperature: 35°C - 40°C. Skimming efficiency, measurable in terms of the percentage of residual fat in the whey, is between 0,02% and 0,03%. The percentage may also be lower if the whey is pre-clarified., Whey skimming capacity: 7.500 liter per hour., The new offered whey skimming separator comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, made out of special S ...

Cream separator for warm milk skimming. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Separation of mixtures of liquids with different densities and simultaneuous elimination of solids (Three Phase Separation). Product: Fresh cows milk (≤ 48h from milking). Process temperature: 48°C - 58°C. Skimming efficiency, expressed in terms of the percentage of fat remaining in skimmed milk is 0,04 - 0,055% with the Röse-Gottlieb method or 0,03 - 0,05% with the Gerber method. Concentration of the cream is 25% to 45%. Feeding pressure (in): ± 1,5 bar. Skimmed milk pressure (out): ± 4 bar. Cream pressure (out): ± 2,5 bar., Milk skimming capacity: 10.000 liter per hour., Standardization capacity: 15.000 liter per hour., The new offered milk skimming separator comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, ma ...

New whey clarification separator (clarifier / cleaner) for removing curd fines from the whey, so that the subsequent skimming process is more efficient. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. The best performance is achieved if the temperature is between 50° - 55 °C. Feeding pressure (in): ± 1,5 bar. Clarified milk pressure (out): ± 4 bar., Whey clarification capacity: 15.000 liter per hour., The new offered whey clarification separator (clarifier) comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, made out of special SUPER DUPLEX stainless steels with very high resistance to mechanical stress and corrosion., - Discharged of the product by means of 1 centripetal pump., - Discharge of the solid substance (collected in the periphery of the bowl in the sludge chamber) periodically automatically eje ...

TRIA GRANULATOR, (machine offered totally reconditioned - photos taken before reconditioning), type XT 9042, 900 mm wide rotor, Sturdy and reliable machine from this well renowned Italian manufacturer, 30 kw drive, n. 3 rotating knives + 2 still knives, screen 12 mm., prepared for extraction through blower, control panel, constructed in 2016, the machine is offered totally reconditioned, can be completed with conveyor belt, pneumatic extraction, bag filling/weighing station., Constructors description for the XT series: Granulators dedicated to scraps recovery from rigid or flexible extrusion for small sprues or heavy moulds, also suitable for second step grinding of pre-crushed pieces.The granulator of this series, thanks to the special design of the cutting chamber, are also widely used for an immediate and safe in-line grinding of film and trims. The rotary discs integral with the roto ...

New whey clarification separator (clarifier / cleaner) for removing curd fines from the whey, so that the subsequent skimming process is more efficient. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. The best performance is achieved if the temperature is between 50° - 55 °C. Feeding pressure (in): ± 1,5 bar. Clarified milk pressure (out): ± 4 bar., Whey clarification capacity: 12.000 liter per hour., The new offered whey clarification separator (clarifier) comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, made out of special SUPER DUPLEX stainless steels with very high resistance to mechanical stress and corrosion., - Discharged of the product by means of 1 centripetal pump., - Discharge of the solid substance (collected in the periphery of the bowl in the sludge chamber) periodically automatically eje ...

New whey clarification separator (clarifier / cleaner) for removing curd fines from the whey, so that the subsequent skimming process is more efficient. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. The best performance is achieved if the temperature is between 50° - 55 °C. Feeding pressure (in): ± 1,5 bar. Clarified milk pressure (out): ± 4 bar., Whey clarification capacity: 10.000 liter per hour., The new offered whey clarification separator (clarifier) comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, made out of special SUPER DUPLEX stainless steels with very high resistance to mechanical stress and corrosion., - Discharged of the product by means of 1 centripetal pump., - Discharge of the solid substance (collected in the periphery of the bowl in the sludge chamber) periodically automatically eje ...

Used Filling Line For Pet Bottles YOM 2001 Sipa blower equipment is in working condition still running till the end of the year These Used Filling Line For Pet Bottles are in good working condition It is possible to see all the machines in operation by the end of 2022 1 Sipa blower equipment type SF 8 4 893 year of manufacturing 2001 capacity 2L 4 000 bottles h inclusive Preform silo elevator and sorting unit inclusive in this Used Filling Line For Pet Bottles Industrial Frigo chiller Model GR2A 40 2004 2 Air conveyor system from outlet Sipa blower equipment machine to the inlet of the Radenska triblock The air conveyor system is pneumatically adjustable 14m Filling part of the line 3 Tribloc Radenska 24 48 5 Type T48 48 RP 24 N05 with 24 rinsing stations 48 filling valves and 5 capping for plastic screw caps year of manufacturing 1993 4 Complete bottle conveyor system 5 Foil shrinking m ...

New milk clarification separator (clarifier / cleaner) for removing impurities from milk and reduces the level of leucocytes and bacteria. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Product: Fresh cows milk (≤ 48h from milking). It can be carried out using both hot and / or cold milk, but the best performance is acheived if the temperature is between 50° - 55 °C. Feeding pressure (in): ± 1,5 bar. Clarified milk pressure (out): ± 4 bar., Milk clarification capacity: 15.000 liter per hour., The new offered milk clarification separator (clarifier) comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, made out of special SUPER DUPLEX stainless steels with very high resistance to mechanical stress and corrosion., - Discharged of the product by means of 1 centripetal pump., - Discharge of the solid substan ...

Blowing and Sterilization station MCF Trade Model 2 Never used This machine allows the washing of glass containers of various sizes by means of a jet of air and steam Automatic blowing and sanitizing station fast model with sterile air for the elimination of any foreign bodies inside the containers also prepared for steam injection to sanitize and heat the containers The blowing station is a machine designed for washing glass containers of various sizes see photo The machine essentially consists of a linear conveyor belt that places the containers on a single row These pass through a tilting group formed by a clamping system that can be adjusted according to the format to be processed Once the containers are overturned they descend onto nozzles with adjustable distance and height in order to better center and clean the containers At the end of the operation the containers return to their ...

New milk clarification separator (clarifier / cleaner) for removing impurities from milk and reduces the level of leucocytes and bacteria. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Product: Fresh cows milk (≤ 48h from milking). It can be carried out using both hot and / or cold milk, but the best performance is acheived if the temperature is between 50° - 55 °C. Feeding pressure (in): ± 1,5 bar. Clarified milk pressure (out): ± 4 bar., Milk clarification capacity: 12.000 liter per hour., The new offered milk clarification separator (clarifier) comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, made out of special SUPER DUPLEX stainless steels with very high resistance to mechanical stress and corrosion., - Discharged of the product by means of 1 centripetal pump., - Discharge of the solid substan ...

New milk clarification separator (clarifier / cleaner) for removing impurities from milk and reduces the level of leucocytes and bacteria. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Product: Fresh cows milk (≤ 48h from milking). It can be carried out using both hot and / or cold milk, but the best performance is acheived if the temperature is between 50° - 55 °C. Feeding pressure (in): ± 1,5 bar. Clarified milk pressure (out): ± 4 bar., Milk clarification capacity: 10.000 liter per hour., The new offered milk clarification separator (clarifier) comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, made out of special SUPER DUPLEX stainless steels with very high resistance to mechanical stress and corrosion., - Discharged of the product by means of 1 centripetal pump., - Discharge of the solid substan ...

Used palletizer for Glass Bottles Virmauri Hercules A70 This Used palletizer for Glass Bottles Virmauri Hercules A70 for sale is for American carton boxes for glass bottles and tray cartons for glass bottles The palletizer has just been disassembled and was operating in an edible oil plant at an hourly speed of about 8000 b h with cartons of 6 and 12 bottles of different sizes and shapes The efficiency of the used palletizer equipment system is very good It has been disconnected in a workmanlike manner and has all the cables and electrical branches marked All the motors are in working order and the lifting chains have been checked and are in good repair This machine is completely automatic and comes with safety barriers these include the sensors of the barriers of the machine to ensure that there is no intrusion The palletizer can work both 1000 1200 Euro pallet 800 1200 formats It was d ...

New milk bacteria clarification separator (bactofuge) for reducing the bacteria in milk and consequently reduces the temperature of the pasteurisation process. Used to upgrade the quality of (drink)milk or for the production of cheese. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Process temperature: 50°C - 60°C. Feeding pressure (in): ± 1,5 bar. Bacteria clarified milk pressure (out): ± 4 bar., The efficiency, measurable in terms of the percentage of bacterial load abatement, depends on the product and process characteristics as follows:, - 97-99% anaerobic spores., - 85-95% aerobic spores., - 75-95% total bacteria load., Milk bacteria clarification capacity: 10.000 liter per hour., The new offered milk bacteria clarification separator (bactofuge) comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, ma ...

Cream separator for warm whey skimming. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Separation of mixtures of liquids with different densities and simultaneuous elimination of solids (Three Phase Separation). This process separates the fat content in the whey (present is a small percentage, between 0,15% and 0,70%). It is simpler as the milk proces, if there are low curd fines. The whey should be filtered before entering the separator. Process temperature: 35°C - 40°C. Skimming efficiency, measurable in terms of the percentage of residual fat in the whey, is between 0,02% and 0,03%. Ther percentage may also be lower if the whey is pre-clarified., Whey skimming capacity: 15.000 liter per hour., The new offered whey skimming separator comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, made out of special ...

Cream separator for warm whey skimming. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Separation of mixtures of liquids with different densities and simultaneuous elimination of solids (Three Phase Separation). This process separates the fat content in the whey (present is a small percentage, between 0,15% and 0,70%). It is simpler as the milk proces, if there are low curd fines. The whey should be filtered before entering the separator. Process temperature: 35°C - 40°C. Skimming efficiency, measurable in terms of the percentage of residual fat in the whey, is between 0,02% and 0,03%. Ther percentage may also be lower if the whey is pre-clarified., Whey skimming capacity: 10.000 liter per hour., The new offered whey skimming separator comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, made out of special ...

Cream separator for warm milk skimming. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Separation of mixtures of liquids with different densities and simultaneuous elimination of solids (Three Phase Separation). Product: Fresh cows milk (≤ 48h from milking). Process temperature: 48°C - 58°C. Skimming efficiency, expressed in terms of the percentage of fat remaining in skimmed milk is 0,04 - 0,055% with the Röse-Gottlieb method or 0,03 - 0,05% with the Gerber method. Concentration of the cream is 25% to 45%. Feeding pressure (in): ± 1,5 bar. Skimmed milk pressure (out): ± 4 bar. Cream pressure (out): ± 2,5 bar., Milk skimming capacity: 5.000 liter per hour., Standardization capacity: 7.500 liter per hour., The new offered milk skimming separator comes with:, - Steel frame, cladded in stainless AISI 304., - Bowl with disc stack, made out o ...

New milk bacteria clarification separator (bactofuge) for reducing the bacteria in milk and consequently reduces the temperature of the pasteurisation process. Used to upgrade the quality of (drink)milk or for the production of cheese. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Process temperature: 50°C - 60°C. Feeding pressure (in): ± 1,5 bar. Bacteria clarified milk pressure (out): ± 4 bar., The efficiency, measurable in terms of the percentage of bacterial load abatement, depends on the product and process characteristics as follows:, - 97-99% anaerobic spores., - 85-95% aerobic spores., - 75-95% total bacteria load., Milk bacteria clarification capacity: 6.000 liter per hour., The new offered milk bacteria clarification separator (bactofuge) comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, mad ...

New milk bacteria clarification separator (bactofuge) for reducing the bacteria in milk and consequently reduces the temperature of the pasteurisation process. Used to upgrade the quality of (drink)milk or for the production of cheese. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Process temperature: 50°C - 60°C. Feeding pressure (in): ± 1,5 bar. Bacteria clarified milk pressure (out): ± 4 bar., The efficiency, measurable in terms of the percentage of bacterial load abatement, depends on the product and process characteristics as follows:, - 97-99% anaerobic spores., - 85-95% aerobic spores., - 75-95% total bacteria load., Milk bacteria clarification capacity: 8.000 liter per hour., The new offered milk bacteria clarification separator (bactofuge) comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, mad ...