Manufacturer:
(Category: 301-1639)
a KM-200-1000 machine with removal robot built in 2006 for sale. The machine is in neat condition and serviced by Krauss Maffei.
Injection moulding machine Arburg 470C 1600/625 Bj 1995
Injection moulding machine Arburg 320C 600/250 BJ 2002
Vertical injection moulding machine Arburg 900 T 800/150 BJ 2001
Injection moulding machine Netstal synergy 600/110 BJ 2001
Injection moulding machine Arburg 570C 2000/150 60 2 K BJ 2007
2 x Injection moulding machines Demag 1000 420 310 El Exis S Bj 2003
Injection moulding machine Arburg 470s 1100/290 YOC 2017 2 K
Demag Ergotech EXTRA 50-200 BJ2005 for sale/scrapping, but the control is already missing here.Enclosed you will find the photos and technical data of the machine for sale with BJ 2005. The machine currently has a plasticizing unit with 25mm screw (BJ 2014) installed, we sell the original plasticizing unit with 30mm screw that is still working for the machine. The machine worked until it was taken out of service, we installed the control system on another machine.
Injection moulding machine Krauss Maffei KM 125-390 C2 BJ 2004
Key data: 3000 kN, 900 g/PS, 60 mm
Injection molding machine Krauss Maffei Km 300 1400 C1 BJ 1998
Inv. Num. : 8511 Type: J100ADS-180U 45 Producer: JSW Created: 2023 Parameters: Total number of injections: 6800 Operating hours: 60 h Panel dimensions: 630 x 630 mm Clamping force: 1000 kN Screw diameter: 45 mm Injection capacity: 223 cc Injection mass: 203 g Maximum distance between mounting plates: 910 mm Distance between uprights (horizontal): 460 mm Distance between uprights (vertical): 460 mm Maximum spray pressure: 157 MPa Opening of the mold: 360 mm Max. speed: 400 mm Machine length: 4950 mm Machine width: 1230 mm Machine height: 1670 mm Injection weight: 4600 kg Equipment: Manual Spares 1x SHINI SAL-3U-CE Suction Device 1x SHINI Vacuum Aspirator Molecular Dryer SSD120U-80H SHINI STM-607-W-CE Temperature Controller SHINI SIC-7.5A-R2 Cooling Unit Double dosing of SHINI SCM dye
SANDRETTO series 9 860/2200 Clamping force: 220 T - 2200 KN Distance between tie bar : 510 X 510 mm Platen dimension: 770 X 770 mm Min / max mold thickness: 210 - 630 mm Opening stroke: 550 mm Injectable volume: 475 cm3 Injection pressure: 1815 bars Screw diameter: 50 mm New screw / sheath injection assembly Total machine power: 43.1 KW L/D ratio: 20 Euromap 12 robot interface (Dal maschio Ginko from 2004 possible option) 2 aux cores (PM and PF) Top dosage
Key data: 2500 , 60
ENGEL 250T injection molding machine Reference : ES1800/250HL Clamping force : 250T Year : 1999 Working hours : 73 655 h Screw diameter : 60 mm Injectable volume : 763 cm3 Injection pressure : 1969 bars Platen dimensions : 1150 x 900 mm Mold thickness (min/max) : 350 mm x 850 mm Dimensions : 6,92 m x 2,08 m x 2,14 m + with 1 SEPRO robot
B&A REF: 9164 TON: 80 SCREW DIAMETER: 40MM SHOT WEIGHT: 208 STROKE VOLUME: 231CM3 INJECTION PRESSURE: 2025AR PLATEN SIZES: 590 X 580MM DBTB: 400 X 400MM MIN MOULD HEIGHT: 250MM MOULD OPENING STROKE: 450MM MAX DAYLIGHT: 250MM EJECTOR STROKE: 150MM CONTROLS: NC4 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 15 HEATING CAPACITY: 11KW SCREW DRIVE: HYDRAULIC
Key data: 600 kN, 132 g/PS, 35 mm
Arburg 320C-600-250 Injection Moulding Machine Number: 238 Availability: in stock Year of production: 2008 Producer: Arburg Screw diameter[mm]:35 Injection weight [g]: 132 Injection pressure [bar]: 1820 Gap spacing [mm]: 320×320 Panel size [mm]: 446 x 446 Min. Form Height [mm]: 200 Control Type: Selogica Tongue: German Installed power [kW]: 23.9 Working hours [h]: 76550 Weight [kg]: 2330 Dimensions [mm]: 3500×1500 Feed hopper: NO Robot Nest: Yes Core String: 1x
Key data: 1000 kN, 172 g/PS, 40 mm
Arburg 420C-1000-290 Injection Moulding Machine with sorting flap Number: 239 Availability: in stock Year of production: 2006 Producer: Arburg Screw diameter[mm]:40 Injection weight [g]: 172 Injection pressure [bar]: 1530 Clamping force [kN]: 1000 Gap spacing [mm]: 420 x 420 Plate size [mm]: 570×570 Min. Form Height [mm]: 250 Control Type: Selogica Tongue: German Installed power [kW]: 21.4 Working hours [h]: 95822 Weight [kg]: 3700 Dimensions [mm]: 4400 × 2000 Feed hopper: NO Robot Nest: Yes Core String: Yes
DEMAG ERGOTECH EXTRA 80-430 injection moulding machine was built in 2003 in Germany by Demag Ergotech Wiehe GmbH (now Sumitomo (SHI) Demag Plastics Machinery GmbH). The machine is designed for the economic production of plastic parts of different colours, shapes and sizes, using the injection moulding method. This method involves feeding plasticised plastic into a mould and then clamping it with high press force. The machine’s high-performance components, including a precision mould clamping system operating at a maximum force of 80 tonnes, guarantee high repeatability of the manufactured parts. The DEMAG ERGOTECH 80-430 EXTRA injection moulding machine weighs 3600 kg. Technical specifications of the DEMAG ERGOTECH EXTRA 80-430 injection moulding machine - maximum mould clamping force: 80 t (800 kN) - screw diameter: 40 mm - screw length/diameter ratio: 20 L/D - maximum injectio ...
DEMAG ERGOTECH VIVA 800-400 injection moulding machine was built in 2001 in Germany by Demag Kunstofftechnik (currently Sumitomo (SHI) Demag Plastics Machinery GmbH). This highly efficient machine is used for the economic production of plastic parts of different colours, shapes and sizes. These parts are produced using the reliable injection moulding method, which involves feeding plasticised plastic into a mould and then clamping it with high press force. The machine’s high-performance components, including a precision mould clamping system operating at a maximum force of 80 tonnes, ensure high repeatability of the manufactured products. The DEMAG injection moulding machine weighs 3750 kg. Technical specifications of the DEMAG ERGOTECH VIVA 800-400 injection moulding machine - maximum mould clamping force: 80 t (800 kN) - screw diameter: 35 mm - maximum injection weight PS: 157 ...
Key data: 3500 kN
Awaiting refurbishment is this Arburg 221KS 350/100 U injection moulding machine. Fitted with a Selogica controller. This is a universal machine from Arburg which allows for the clamp unit to be pivoted vertically, ideally suited to insert moulding. These small machines are sought after for the many moulding options they can suit, from a very compact machine. Occasional vertical moulding requirement? These machines are ideal. In standard horizontal configuration, they operate the same as any traditional machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 f ...
Inv. Num. : 8355 Type: TRX 100V Producer: TEDERIC Created: 2008 Parameters: Clamping force: 100 t Injection capacity: 228 cc Injection mass: 208 g Height of the clamping plate: 550 mm Width of the clamping plate: 540 mm Distance between uprights (horizontal): 360 mm Distance between uprights (vertical): 360 mm Ejector stroke length: 100 mm Spindle power: 11 kW Machine length: 4100 mm Machine width: 1100 mm Machine height: 1800 mm Injection weight: 3500 kg
Key data: 805 kN
Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 80M injection moulding machine, fitted with the Procan Controller. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle an ...
Key data: 50 kN, 38 mm
Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 50M injection moulding machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing m ...
Key data: 5000 kN, 80 mm
KM 500/2700C2 Specifications Closing page: Clamping force: 5000 kN Wooden dimension h x v: 900 x 800 mm Min. installation height: 480 mm Plate spacing max.: 1650 mm Centering: 200 mm Tool weight: 7900 kg Splash Side: Screw diameter: 80 mm Capacity: 1433 cc Spray pressure: 1829 bar Equipment: MC 4 Control Core moves: 2+2
Key data: 220 kN, 32 g/PS, 24 mm
Now fully refurbished by the team at STV Machinery is this Boy 22M-HV machine. It has a horizontal clamp unit and a vertical injection unit which it makes it suited for split-line injection. It is fitted with a 24mm diameter screw. Manufactured in 2006 and has less than 28,000 hours. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and ...
B&A REF: 9108 TON: 430 SCREW DIAMETER: 80MM SHOT WEIGHT: 1645 STROKE VOLUME: 1810CM3 INJECTION PRESSURE: 1615AR PLATEN SIZES: 1060 X 1135MM DBTB: 680 X 760MM MIN MOULD HEIGHT: 250MM MAX MOULD HEIGHT: 800MM MOULD OPENING STROKE: 730MM MAX DAYLIGHT: 1530MM EJECTOR STROKE: 250MM CONTROLS: COLUMBIA CORE PULLING: 3 AIR VALVES: 4 MOTOR: 45 HEATING CAPACITY: 34KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: HYDRAULIC
Key data: 280 kN, 30 mm
Injection moulding machine ENGEL Victory 200-28 Tech Stock No.: 503562 Manufacturer: ENGEL Type: Victory 200-28 Tech Hours: 31150 Control: CC200 Year of Make: 2011 Technical data closing page Clamping force: 280 kN Panel size h x v: 500 x 450 mm Min. installation height: 150 mm Plate spacing max.: 550 mm Opening travel: 400 mm Ejector stroke: 100 mm Ejector force: 40 kN Centering of movable plate D: 125 mm Centering of fixed plate D: 125 mm Tool weight: 450 kg Technical Data Spray Side Screw diameter: 30 mm Displacement: 135 cc Spray pressure: 1065 bar Screw length: 17 l/d Screw stroke: 140 mm Screw speed: 480 min Injection flow to the outside: 78 g/s hp Number of heating zones: 4 Nozzle travel: 230 mm Dimensions & Weight Machine dimensions LxWxH: 3.2m x 1.35m x 1.85m Total Weight: 2900KG Equipment Screen text German Levelling elements Technic ...
Key data: 800 kN, 45 mm
KRAUSS MAFFEI KM 80-750 CX Stock No.: 503569 Manufacturer: KRAUSS MAFFEI Type: KM 80-750 CX Control: MC6 Year of Make: 2012 Operating hours: 34000 h Technical data closing page Clamping force: 800 kN Wooden dimensions h x v: 420 x 420 mm Panel size h x v: 670 x 670 mm Min. installation height: 250 mm Max. installation height: 500 mm Plate spacing max.: 750 mm Opening travel: 500 mm Ejector stroke: 150 mm Ejector force: 23 kN Centering of movable plate D: 125 mm Centering of fixed plate D: 125 mm Tool weight: 1000 kg Technical Data Spray Side Screw diameter: 45 mm Displacement: 318 cc Spray pressure: 2336 bar Screw length: 22 l/d Screw speed: 355 min Outdoor injection flow: 143 g/s PS Number of heating zones: 5 Dimensions & Weight Machine dimensions LxWxH: 4.5m x 1.5m x 2m Total Weight: 3900KG Equipment Screen text German Core pull hydraulic 1x M ...
Key data: 700 kN, 132 g/PS, 35 mm
Injection moulding machine Arburg 370S-700-290 Item number: 232 Availability: In stock Year of Make: 2008 Brand: Arburg Specifications Injection weight: 132 g Clamping force: 700 kN Screw diameter: 35 mm Spray pressure: 2000 bar Tiebar spacing: 370x370 mm Clamping plate size: 510x510 mm Tool installation height min.: 200 mm Plate spacing max: 600 mm Control: Selogica Language: German Power: 23.9 kW Hours: 67848 h Weight: 3300 kg Dimensions: 3.8x1.5 m Funnel: No Euromap: Yes Air Valve: Yes
Key data: 2500 kN, 618 g/PS, 60 mm
Krauss Maffei 250-1400CX Injection Molding Machine with Robot and Gas Boost (225) Item number: 225 Availability: In stock Year of Make: 2016 Brand: KRAUSS MAFFEI Specifications Injection weight: 618 g Injection flow: 848 cc/s Clamping force: 2,500 kN Screw diameter: 60 mm Spray pressure: 2005 bar Tiebar spacing: 630x630 mm Clamping plate size: 1135x1180 mm Tool installation height min.: 330 mm Plate spacing max: 1150 mm Control: MC6 Language: German Power: 70 kW Hours: 23170 h Weight: 15000 kg Dimensions: 6.5x2.3x2.3 m Funnel: No Core Pull: Yes Euromap: Yes Air Valve: Yes Heating Ducts: Yes Gas storage: Yes
Key data: 20000 kN, 135 mm
Dosing 1: Plasticizing 1: Screw diameter mm 135 Screw diameter mm 120 | 135 | 150 Dosing Stroke Screw stroke mm 610 Maximum injection capacity cm3 6899 | 8731 | 10780 Screw speed min-1 125 Worm torque Screw torque Nm 14000 Maximum screw speed reduced torque min-1 135 Reduced torque maximum screw speed Nm 12963 Reduced screw speed maximum screw torque min-1 112 Maximum screw torque reduced screw speed Nm 15630 Plasticizing performance (3-zone) 1.2 Recovery rate (3-zone screw) 1.2 g/s 165 | 222.9 | 231,3 Plasticizing performance (barrier) 3 Recovery rate (barrier screw) 3 g/s 208.3 | 279.2 | 264,6 1) Values for polystyrene up to injection unit 2550 according to ETR 10100 1) Data for GPPS up to injection unit 2550 acc. ETR 10100 2) Values for HDPE from injection unit 3550 according to ETR 10100 2) Data for HDPE from injection unit 3550 onward acc. ETR 10100 3) Values for HDP ...
BATTENFELD TM 1300 injection moulding machine was built in 2004 in Austria by BATTENFELD GmbH. The machine is used for the economical mass production of plastic parts of various colours, shapes and sizes. The workpieces are produced using the injection moulding method, in which plasticised plastic is fed into a mould and then closed with high press force. In order to achieve parts with high repeatability and durability, the machine uses many reliable components with excellent parameters, including a high-precision mould clamping system operating at a force of up to 130 tonnes. All this is complemented by the intuitive UNILOG B4 CNC control with its many useful functions, which allows programming of the operating modes in just a few steps. The TM 1300 injection moulding machine weighs 7000 kg. Technical specifications of the BATTENFELD TM 1300 injection moulding machine - CNC controll ...
FERROMATIK MILACRON K-TEC 450 injection moulding machine was built in 2007 in Germany by Ferromatik Milacron GmbH. This multifunctional, technically advanced machine is used for the mass production of plastic parts of different colours, shapes and sizes. The machining process involves reliable components with excellent parameters, including among others a precision mould clamping system that operates with a force of up to 450 tonnes. In turn, the parts produced by injection moulding are distinguished by their high repeatability, durability and precision. The K-TEC 450 injection moulding machine weighs 30200 kg. Technical specifications of the FERROMATIK MILACRON K-TEC 450 injection moulding machine - maximum clamping force: 450 t (4500 kN) - EE1 screw diameter: 80 mm - EE2 screw diameter: 30 mm - screw length/diameter ratio: 20 L/D - maximum injection pressure: 292 bar - maximum ...
Key data: 3500 , 1212 , 70
Screw diameter; 70 mm Injectable volume / Shot volume: 1212 cm3 Injection pressure: 1877 bar Column passage / Bettween tie bar: 810 x 710 mm Mould tickness thickness: 380 mm max: 820 mm Opening stroke: 710 mm Core Pulling: 2 Robot interface: yes / Yes E67 Options:
Key data: 2000 , 678 , 60
Screw diameter; 60 mm Injectable volume / Shot volume: 678 cm3 Injection pressure: 2000 bar Column Passage /Bettween tie bar: 570 x 570 mm Mould tickness thickness: 250 mm max: 550 mm Opening stroke: 450 mm Core Pulling: 2 Robot interface: yes / Yes E67 Options: 12 Zones chauffe - 12 heating way
Screw diameter; 55mm Injectable volume: 427 cm3 Injection pressure: 1720 bar Passage between columns: 570 x 570 mm Minimum mould thickness: 250 mm max: 750 mm Opening stroke: 600 mm Cores: 2 Robot interface: NO Options: Electrical dosing motor
B&A REF: 8759 TON: 200 SHOT WEIGHT: 297 SCREW DIAMETER: 50MM STROKE VOLUME: 353CM3 INJECTION PRESSURE: 2050AR PLATEN SIZES: 795 X 795MM DBTB: 570 X 570MM MIN MOULD HEIGHT: 300MM MOULD OPENING STROKE: 650MM MAX DAYLIGHT: 950MM EJECTOR STROKE: 225MM CONTROLS: SELOGICA AIR VALVES: 1 MOTOR: 30 HEATING CAPACITY: 12KW SCREW DRIVE: ELECTRIC
Battenfeld HM 500/3400 Clamping force: 500t Year of construction: 2007 Shot capacity: 1937g Injection unit .../3400 Screw diameter: 85 mm Injection pressure: 1574 bar Shot capacity: 1937 g L/D ratio: 22 Clamping unit 500/... Clamping force: 500 t Plate size: 1590 x 1470 mm Distance between tie bars: 1000 x 800 mm Max. plate spacing: 1600 mm Weight: 25000 kg Equipment: -1 x air valve -2 x core pull on the closing side, NW 6 -Interface for robot according to EUROMAP 67 -Integrated temperature control for the feed zone -Core pull movement and parallel ejection via DFEE auxiliary pump -Wear- and corrosion-protected plasticizing unit package -Potential-free contact parallel to the dosing unit
