CNC Milling Machines used for sale (160)

Control Heidenhain ... TNC 530 Clamping table surface... 3000x1250mm Axis X ... 3000mm Axis Y ... 1000mm Axis Z ... 1400mm Spindle speed... 10-5000 rpm Max. table load... 7000kg Spindle holder ... ISO 50. Number of positions in the tool changer ... 8 Machine weight ... 23000kg Spindle Hunter 30 000rpm Rotary table ISN 1000 CNC V

Auction-ID: A1-48006-12

InfoTEC 2515 Energy CNC router was built in 2017 in Poland by 4CNC Sp. z o.o. The machine is designed for the production of precise, repeatable parts made of a wide range of materials, i.e. wood, plastics and light metals. Its versatility and cost-effectiveness make it an excellent choice for companies with diversified production profiles. Materials are machined on a large work table using a brushless HSD spindle with automatic tool changing (ATC) system. This system allows the use of several tools in a single machining cycle, significantly saving the time required for changeover of the workhead. What’s more, the innovative control system has been integrated with powerful digital AC servo motors to achieve excellent dynamics and feed repeatability. The InfoTEC 2515E CNC milling machine weighs approximately 2200 kg. Technical specifications of the InfoTEC 2515 Energy milling machi ...

Auction-ID: A1-48006-17

Milling machine MH1600 The basic machine was built in 1990 but was rebuilt from scratch in 2015 by the company MMD Bad Emstal, as well as control conversion to iTNC530 (Guideways sanded and scraped, KGT new or overhauled, bearings new, etc. etc..) (so the machine was new again in 2015) iTNC530 IKZ air and water through spindle center Rotoclear Chip conveyor SK 50 Chain 32 WZ Transport beam Crane loading possible Machine is provisionally connected to the power connection and can be visited by appointment

DECKEL FP3 ATC CNC Universal Tool Milling Machine DECKEL CONTOUR 3 Control Used machine, partially dismantled Details: CNC controlled 3-axis tool milling machine LID CONTOUR 3 control Automatic Tool Changer (ATC) Tool magazine 20-fold Vertical milling head with SK40 tool holder Electronic feed control Control panel with hand control functions Central lubrication system Workspace enclosure Control cabinet make DECKEL Feed-in: 380 V / 50 Hz In 2025, a new power supply & ballast circuit was installed Additional scope of delivery: Tool cabinet including contents (illustration as an example, actual scope of delivery may vary) Tool trolley including contents (illustration as an example, actual scope of delivery may vary) Cooling lubricant tank with accessories Technical data: LID CONTOUR 3 control with path control f ...

Milling machine Maho MH 600E BJ 1986

Fanuc 18-M,4 axis,travel in axes:X -1018mm, Y - 560mm, Z - 520mm,spindle speed - 14,000 rpm,full axis 4,magazine - 30 itemsOther machines, devices and tools unrelated to the subject of sale visible in the photos are not part of the offer. Auction-ID: A7-48036-12

Milling machine Mikron UME 600 BJ 1997

CNC Milling Machine - Heidenhain TNC 310 with handwheel - hydr. Tool Clamps - Central lubrication - Coolant system - Machine light - Machine feet - Enclosure x-travel 600 mm y-travel 400 mm z-travel 400 mm Table size 800 x 400 mm Spindle holder ISO Sk 40 Spindle speeds: 10 - 3150 rpm Quill stroke mm Total power requirement 12.0 kVA Machine weight approx. 2.2 t Dimensions L x W x H 2.0 x 1.85 x 1.95 m Auction-ID: A7-48095-587

Milling machine Mikron VCP 800 BJ 2000

Equipment: - New TFT screen - Coolant system - Hydraulic tool clamping - Milling head with quill - Documentation x-travel 410 mm y-travel 310 mm z-travel 400 mm Table size 700 x 280 mm Control Heidenhain TNC 145 Mounting SK40 Speed range 40- 2,000 rpm Rapid traverse speed 1.5 m/min Feed speed 1500 mm/min Drive power 2.2 kW Quill stroke 63 mm Weight 1.3 t Total power requirement 2.2 kW Machine weight approx. 1.5 t Dimensions L x W x H 1.4 x 2.1 x 2.0 m Auction-ID: A7-48095-469

InfoTEC 3121 PRO CNC router was built in 2016 in Poland by 4CNC Sp. z o.o.. The machine is designed for precision machining of a wide range of materials, i.e. wood, soft metals and plastics. Thanks to its versatility and high performance, it is ideal for professional companies with diverse production profiles. The InfoTEC 3121 PRO has a large work table with a length of 3100 mm and a width of 2100 mm, which enables comfortable machining of large workpieces. Operations such as drilling and milling are performed by a reliable HITECO spindle. The unit, driven by a powerful motor, offers a rotational speed of up to 24000 rpm, excellent dynamics and high durability. There is also a 6-position tool magazine alongside the machine, which enables automatic and fast tool changes, without interruption of the process. To ensure user comfort and safety, the machine is equipped with a dust extra ...

Gantry CNC machining center TH. Kekeisen UFF 6000/13, year 1994, equipped with Heidenhain TNC 425 numerical control, automatic tool magazine, large work table, integral protection enclosure, hydraulic unit and Mayfran International chip conveyor. Accessories included: The storage cabinets visible in the photographs are included in the sale. The equipment, accessories and supplies present in the drawers at the time of the inspection are also included in the lot, according to the photos available. No detailed inventory has been carried out. Operating status: The machine has been shut down for about two years. According to the seller, it was fully functional when it was turned off. Since then, it has not been used or tested. Work to be planned: A complete upgrade of the electrical installation is necessary. The cost of this modernisation is estimated at around €40,000 excluding tax, ...

Fixed Bed Milling Machine VERNIER DB 420 Travel X: 1200 mm Travel Y: 420 mm Travel Z: 600 mm Command HEIDENHAIN Spindle SA40 Spindle speed: from 40 to 2000 RPM Table size: 1600 x 400 mm Horizontal + vertical tilt head Spindle motor: 7,5 KW Feeds: auto X - Y - Z Voltage: 380 V Width with ends table: 2700 mm Depth: 2500 mm Total height: 2200 mm Weight: approx 4,5 T

CNC Machining Center Manufacturer: Werkzeugmaschinenfabrik Vogtland GmbH Type: HPC FLEX-V100 (special machine) Year of Make: 2005 Serial Number: 053-497 CNC special machine for machining roller bearing cages. The plant has a processing unit for horizontal and vertical processing with an automatic pallet changing system. Using two NC rotary tables (A and B axis), workpieces are precisely positioned and swivelled between loading and machining positions. Loading is carried out via an automatic pallet changer with a separate loading station. The plant is equipped with extensive peripherals, including a high-pressure coolant system, hydraulic unit, chip conveyor, recooling system, central lubrication and oil and emulsion mist extraction. The system is controlled by Siemens SINUMERIK 840D, and the entire system is coordinated by a Siemens S7 control system. Scope of Delivery • CNC ma ...

Without enclosure Control: CNC432 (V9) Working Area: XYZ 1000mm/500mm/650mm Rigid angle table: 1,150mmx650mm Max. table load: 900kg Spindle holder: SK50 Speed: 40-1600 rpm Feed: 5-2000mm/min Rapid traverse 6 m/min Space requirement: L:3500mm W:4285mm H: 2146mm Y axis is not displayed, but drives. Information without guarantee Condition and details see pictures

x-travel: 6500 mmy-travel: 1500 mmz-travel: 2000 mmcontrol: HEIDENHAIN iTNC 530 HSCI total power requirement: kWweight of the machine ca.: 58 tdimensions of the machine ca.: 14,5x7 mThe ANAYAK HVM-65 traveling column milling machine stands for high rigidity, precision and machining performance. Equipped with a Heidenhain iTNC530 HSCI control, this CNC milling machine is ideally suited for demanding heavy-duty machining applications. The proven traveling column design with a fixed distance between column and spindle axis ensures consistent accuracy across the entire working range. The cross movement is performed by the column, eliminating the need for a contoured foundation.The orthogonal milling head with 28/42 kW power output reaches speeds of up to 6,000 rpm and features a precise 0.02° x 0.02° indexing resolution. The rigid auxiliary table offers a large clamping surface of 7,300 x ...

SERON 1328 PRO+ CNC router was built in 2023 in Poland by SERON Sp. z o.o. Sp.k. The machine was designed for precise and efficient machining of a wide range of materials, i.e. soft metals, plastics, wood and glass. Thanks to its versatility, it is ideally suited to production plants with diverse production profiles. The SERON 1328 PRO+ represents an extremely attractive combination of state-of-the-art technology and solid mechanics. The monolithic, heavily ribbed design made of high-grade steel effectively eliminates any vibration and deformation generated during even the most intensive operation. An intelligent energy recovery system further significantly reduces the machine’s operating costs. The machining process is performed by means of a brushless HITECO electro-spindle with an efficient cooling system. The inverter powered spindle reaches speeds of up to 24000 rpm, ensurin ...

serial number: 10970000633 control: 3D Bahnsteuerung MILLPLUS letzte AusbaustControl: 67 10.221.661 x-travel: 600 mmy-travel: 700 mmz-travel: 550 mmspindle: SK40 - neu - 380 Std. : spindle speed:: 12.000 U/minautomatic swivel milling head: tool change unit: 30 Plätze: Infrarot-Taster : : : : 600 L: : : : 40 bar : mode of operation: 3 + 4 : : MillPlus IT flushing gun: mit Pumpe : Durchmesser 630 mmT-slots: 9 T-Nuten 14 H7 / 63 mm capacity: 700 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

AVIA FNE 50N CNC milling machine was built in 1998 in Poland by Fabryka Obrabiarek Precyzyjnych AVIA S.A. The machine is fully operational and has been regularly serviced throughout its service life. The AVIA FNE 50N was designed for precision machining of workpieces made of, e.g. steel, cast iron or aluminium. The machining process is performed inside a large work space by means of a reliable spindle with stepless rotational speed adjustment. When removed from the head, the spindle can operate both vertically and horizontally, with the same parameters. The work table with a length of approximately 1250 mm and a width of 500 mm, on the other hand, has T-slots for easy mounting of workpieces and tooling. All this is complemented by an intelligent HEIDENHAIN controller, offering convenient operation and access to many advanced functions. The AVIA FNE toolroom milling machine weighs 3000 ...

x-travel: 300 mmy-travel: 200 mmz-travel: 350 mmfeed power: 160 kpspeed: 20 - 200 mm/minrapid traverse: 1200 mm/mintotal power requirement: 1,4 kWweight of the machine ca.: 0,45 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control SIEMENS SINUMERIK 828d, travel distances X/Y/Z = 350/250/300 mm, weight 2,030 kg, RITTAL control cabinet, 24-fold tool changer SK30, rigid groove clamping plate, chip conveyor KABELSCHLEPP, coolant device

x-travel: 500 mmy-travel: 450 mmz-travel: 400 mmcontrol: iTNC 530 HeidenhainMain spindle:: turning speed range - main spindle: 20 - 10.000 min/-1power capacity - main spindel: 13 / 9 kWmax. Torque: 83 / 57 Nmtool taper: SK 40 DIN 69871table:: table surface area: 700 x 500 mmmax. table load: 500 kgT-slots: 7x 14 x 63 mmtool magazin:: number of toolpositions: 60 pos.max. tool weight: 6 kgmax. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 300 mmchange-time tool to tool: 1,6 secchange-time chip to chip: 8,0 secfeeds:: rapid traverse: 24 m/minFeed force ( X / Y / Z ): 4,5 kNfeed speeds: 1 - 24.000 mm/mintotal power requirement: 26 kVAweight of the machine ca.: 4,5 tdimensions of the machine ca.: 4,5 x 3,5 x 2,3 mDocuments: Chip conveyor: Coolantsystem: through spindle coolant: 20 bar Rotary screen: elektr. hand wheel: Signal lamp - 4 colour: direct tra ...

For sale is a very well-maintained and technically flawless Hermle U 630 T universal milling machine from German quality production. The machine is in exceptionally good condition and was mainly used for single part or small series production. Particularly noteworthy is the low use: only approx. 11,000 switch-on hours only approx. 3,100 spindle hours The milling head or spindle was professionally overhauled directly at Hermle. Invoices and evidence for this are available. The machine can of course be inspected and tested under power. Technical data Manufacturer: Maschinenfabrik Berthold Hermle AG Model: Hermle U 630 T Year of Make: 2001 Control: Heidenhain TNC 426 Travels: X: 630 mm Y: 500 mm Z: 500 mm Spindle holder: SK40 Swivelling milling head Tool changer: 16-speed Switch-on hours: approx. 11,000 h Spindle hours: approx. 3,100 h  ...

x-travel: 560 mmy-travel: 460 mmz-travel: 450 mmControl: OSP U10 M total power requirement: 7,5 kWweight of the machine ca.: 5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Has a 14" wide by 7.5" depth working limits. Works great with no issues! Features listed below. -10 tool ATC Automatic Tool Changer -Power Draw Bar -Flood coolant -Fog Buster Coolant -All Tool holders and Tooling shown in pictures. -4th Axis w/ 4 jaw chuck -Vise -One way needle bearing tool holder for tightening and loosening tools (fabricated on this machine in picture) -Tool chest with everything in it. (endmills, tool holders, fixturing, tool setting, lubricants)

x-travel: 600 mmy-travel: 525 mmz-travel: 500 mmtable surface area: 1000 x 543 mmspindle taper: SK 40 spindle taper: DIN 69871 spindle turning speed - stepless: 20 - 12.000 U/minfeed X/Y/Z-axis: 20 - 10.000 mm/minrapid traverse X/Y/Z axis: 18 / 18 / 15 m/mintable load: max. 350 kgcontrol: HEIDENHAIN MillPlus milling-head swivable +/-: 90 °total power requirement: 26 kVAweight of the machine ca.: 4,2 tdimensions of machine L x W x H: 2,95 x 2,1 x 2,26 mAccessories: various tool fixtures, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Super clean 1993 Bridgeport EZ trak SX 2 axis mill. Machine is in very nice condition. It has none of the usual battle scars from use and appears to have been used very little. The control boots up as it should and both axis motors work smoothly. SPECIFICATIONS: Capacity 9" x 48" Table Size 9" x 48" Longitudinal Travel 30" Cross Travel 12" Vertical Knee Travel 16" Spindle Speeds (Variable) 60-4200 RPM Spindle Taper R-8 Spindle Quill Travel 5" Positioning Speed (X-Y Axis) 100 IPM Feed Rate (X-Y Axis, Variable) 0.1-100 IPM Spindle Quill Feeds (3) 0.0015" - 0.003" - 0.006" Ram Travel 12" Distance, Table To Spindle Nose 2 1/2" - 18 1/4" Throat Distance 6 3/4" - 18 3/4"

Dimensions (L/W/H): 1900x1250x1750 mmweight: 600 kgtotal power requirement: 6,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2019 Hurco VMX 42i Vertical Milling Machine. Less than 100 hours on machine. Machine has been stored in heated building. Boasting a 24-inch Z-axis travel bed and a 42-inch X-axis travel bed, 24-inc Z verticle travel. Equipped with 12,000 RPM, CAT 40 spindle taper and a powerful 24 hp spindle horsepower. 30 station automatic tool changer. Wired for 220 V power source. Magnet shown in video not included in sale of machine. Renishaw tool and part probe.

Dimensions (L/W/H): 2200x1250x1750 mmtotal power requirement: 6,5 kwweight: 700 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dear Ladies and Gentlemen, at the Bruchsal location we offer a used machine for sale without obligation: Worm Gear Milling Machine Gear Shaping Machine Manufacturer: Gleason Pfauter Type: GP200 Year of Make: 2002 Weight: approx. 9.7 t If you are interested, please leave us an offer until 15.06.2026, taking into account the following points: If you have any questions or would like to arrange a viewing appointment (from 01.06.2026), please do not hesitate to contact us.

Dimensions (L/W/H): 1500x1100x1500 mmWeight: 300 kgTotal power requirement: 3,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DOOSAN VCF 850 LSR II is a multi-purpose, vertical machining centers suitable for a wide range of applications. 1993 working hours (like new)

Dimensions (L/W/H): 940x1250x1400 mmWeight: 250 kgTotal power requirement: 3,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions ( x-y/mm) 3000 x 6000 Stroke ( X/mm) 7000 Stroke ( Y/mm) 3200 Stroke ( Z/mm) 1500 Type of controll heidenhain tnc 640 Number of spindle per minute 18000 Chuck connection hsk a 63 Type of head universal automatic bi-rotary Advances 50.000 mm/min Tools connection iso 50 Height ( x/mm) 5380

Dimensions (L/W/H): 2500x2100x1800 mmWeight: 1700 kgTotal power requirement: 7,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Travel distance: X= 600, Y= 400, Z= 400 mm Table size: 900 x 480 mm Spindle speed: 40 - 4,000 1/min Dimensions LxWxH: 2500 x 2200 x 2200 mm Weight: approx. 3,000 kg

Dimensions (L/W/H): 2500x2100x1800 mmWeight: 1700 kgTotal power requirement: 7,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Haas Automation, VF2, Control : Micro-Haas VF2 X-1250mm, Y-508, Z-600, Spindle : SK40 , 10 - 7500 rpm , Feed rate : 0 - 4500mm/min, rapid traverse : 15m/min Table load : 1000kg Weight : 6to, L- 370cm, W330cm, H-290cm, No shift work !

Dimensions (L/W/H): 2200x2000x1950 mmWeight: 700 kgTotal power requirement: 11 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

4 Spindle High Speed Train Milling Machine, ANGER, HCP 10/5, 2005 Control : NUM, very few operating hours. Methods: X-300, Y-1130, Z-300, - 4-axis +/- 180 degrees 4 high frequency spindles : Precise 60000 / 160000 / 18000 / 16000 rpm , rpm Tool holder : Collets depending on the spindle Chip conveyor, ATC, recooling unit, external measuring system Renishaw Power consumption 41 kw

Dimensions (L/W/H): 2700x900x1900 mmWeight: 800 kgTotal power requirement: 3,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 9073 Type: FP 4 MA Producer: DECKEL Created: 1998, GO 2003 Parameters: Control system: HEIDENHAIN Work table length: 800 mm Work table width: 465 mm Maximum vertical spindle speed: 4000 1/min X-axis travel: 465 mm Y-axis travel: 370 mm Z-axis travel: 380 mm Machine height: 1734 mm Machine length: 2000 mm Machine width: 1600 mm Machine weight: 1720 kg

x-travel: 400 mmy-travel: 320 mmz-travel: 450 mmControl: Haidenhain TNC 124 drive of main spindle: 3 kWnumber of spindle speeds: 63-3150 u/mintool taper: SK 40 stroke of quill vertical: 60 mmfeed speeds: 5-2000 mm/minrapid traverse: 2 m/minwork table:: 800x320 mmcoolant: 20 l/mintotal power requirement: 5 kWweight of the machine ca.: 1,7 tdimensions of the machine ca.: 2,2x2,4x1,6 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC machining centre HERMLE U 1000 T – universal milling machine For sale is a high-quality CNC universal machining center from the renowned manufacturer Hermle, model U 1000 T. The machine impresses with its stable design, high precision and versatile applications. Ideally suited for toolmaking, single part production and demanding milling work. General information: Machine Type: CNC Machining Center / Universal Milling Machine Manufacturer: Hermle Model: U 1000 T Year of Make: 1999 Control: Heidenhain TNC 426 Condition: Used, good general condition, functional Shipping time: Immediately available Technical data: Travel (X / Y / Z): approx. 1000 / 630 / 550 mm Table size: approx. 1200 × 630 mm Tool holder: SK 40 Spindle speed: up to approx. 7000 rpm Tool magazine: approx. 16 places Quill stroke: approx. 75 mm Milling head: swivel 0 – 90° (unive ...

x-travel: 400 mmy-travel: 375 mmz-travel: 250 mmtable-size: 600 x 300 mmspindle taper ISO: 40 quill stroke: 50 mmspindle turning speed range: 50-400 , 400 - 3150 U/minCNC-control: TNC 135 voltage: 380 V / 50 Hzfeeds: X+Z = 5 -1000 mm/minrapid traverse: X+Z = 2,4 m/minfeeds: Y = 5 -670 mm/minrapid traverse feeds: Y = 1,6 m/minmeasuring system resolution capability: 0,005 mmtotal power requirement: 3,7 kWweight of the machine ca.: 0,9 tdimensions of the machine ca.: 1,9 x 1,8 x 1,70 m• HEIDENHAIN TNC 135 control,The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, testing is possible by prior arrangement.

CNC Boring and milling machine TIGER TFA 6 , 3200x1000x1580 mm, CNC SELCA 4045, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 3700X1000 mm, Longitudinal travel x axis: 3200 mm, Cross travel y axis: 1000 mm, Vertical travel z axis: 1580 mm, Working feed x-y-z axes: 0 - 13.000 mm/1, Rapid feed x-y-z axes: 12.000 mm/1, Spindle taper: 50 DIN 69871, Spindle speed: 0 - 2500 giri/1, Cnc: SELCA 4045, Accessories: Automatic Head 2 postion, ATC 30 tool post