This EMAG VTC 250 Twin was manufactured in 2015. A robust vertical turning machine featuring a MINERALIT base, it handles workpieces up to 140 mm in diameter and 630 mm in length, weighing up to 20 kg. Integrated with an EMAG pick-up system and dual turrets, each with 11 tool stations. Maximum spindle speed reaches 5000 rpm, driven by a 29 kW power unit. Contact us for more information about this machine.
turning diameter: 220 mm Control: GE Fanuc 18i-TB x-travel: 400 mm z-travel: 450 mm tool taper: VDI 40 number of tool places: 12 Pos. spindle tunring speed: 6.000 U/min Number of working hours: 10741 h work stroke: 150 mm X-Achse EMAG VL5 vertical lathe, built in 2003, very good condition, ready for use, but currently not in operation. Accessories: Extraction system 9 tool holders, 4 of which are driven tools 1 pallet Various workpiece carriers The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This EMAG VSC 250 vertical turning machine was manufactured in 2011. It features a Siemens SINUMERIK 840Dsl control system, a robust hydraulic 6-jaw chuck, and a flange turret with 12 tool positions. With a spindle speed up to 4500 rpm and a main spindle drive power of 28kW at 40% duty cycle, its ideal for precise, efficient operations. For more information about this vertical turning machine, please reach out to us.
x-axis: mm y-axis: mm z-axis: mm turning diameter: mm control: 0 total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
chuck diameter: 500 mm swing diameter over bed slide: 700 mm control: Siemens travel -x axis: 630 mm travel -z axis: 500 mm CNC turning and milling center vertical | EMAG - VMC 450 MT The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VMC450MT | VMC 450MT | VMC-450 | VMC-450MT The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A combined vertical CNC turning and cylindrical grinding center EMAG is available. Chuck diameter: 250mm, max. swing diameter: 260mm, travel X/Z: 680mm/200mm, rapid traverse X/Z: 45m/min/30m/min, grinding spindle speed: 45000rpm, tool stations: 12, basket dimensions X/Y: 400mm/600mm, basket stack: 3. Machine dimensions X/Y/Z: approx. 3200mm/1900mm/2650mm, weight: approx. 8000kg, control: Siemens 840DS, operating hours: approx. 35000h, program hours: approx. 22000h. Documentation available. An on-site inspection is possible.
A high-performance planetary gear production line EMAG including automation and peripheral equipment is available. 1) Raw parts storage (stacker) EMAG. 2) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 3) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 4) Vertical hobbing machine EMAG VLC200H, max. workpiece diameter: 200mm, max. module: 4, travel X/Y/Z: 790mm/120mm/ ...
A CNC vertical turning machine EMAG is available. Workpiece diameter: 100mm, max. workpiece length: 150mm, max. chuck diameter: 160mm, travel X/Z: 650mm/375mm, travel Y: +/-50mm, spindle power: 18kW, torque: 77Nm, speed: 6000rpm, tool stations: 12, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 2500mm/1800mm/2800mm, weight: approx. 4500kg, operating hours: approx. 28487h, spindle hours: 18640h. Including extraction system, 2 axial and 2 radial driven tools, 20x fixed tool holders, 3-jaw chuck, and measuring probe. Documentation available. On-site inspection possible.
turning diameter: 400 mm swing diameter: 420 mm x-travel: 850 mm z-travel: 315 mm spindle head DIN 55026 - Size: 11 spindle bearing diameter: 140 mm turning speeds: max. 4000 U/min tool turret 12 times: C5 Capto rapid traverse x + z axis: 45 / 30 m/min feeding force: 11 kN total power requirement: 58 kW weight of the machine ca.: 9 t dimensions of the machine ca.: 9,5 x 4,5 x 3 m Hard turning Dry machining Chip conveyor Promot Portal and Cellmaster No clamping device available No tools available no Cellmaster accessories available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
An Emag vertical CNC lathe is available. Clamping chuck diameter: 250mm, max. circulation diameter: 270mm, max. machining diameter: 250mm, max. machining length: 175mm, speed: 4500rpm, tool positions: 12, tool holder: VDI 40, travel X/Z: 660mm/300mm, rapid traverse X/Z: 60m/30m/min. Machine dimensions X/Y/Z: approx. 4300mm/1600mm/3300mm, weight: approx. 7500kg, control: Fanuc Series 32i-Model A, operating hours: 64137h. Including automatic loading and unloading with pick-up spindle and integrated part diverter and workpiece storage. Documentation available. On-site inspection is possible.
Two identical Emag CNC machining centers including a chip conveyor, coolant tank, various holders, jaws and a new AGW are available. Chuck diameter: 200mm, max. circulation diameter: 290mm, max. workpiece length: 140mm, speed: 6000rpm, power: 34kW, torque: 480Nm. Travel X/Z: 550mm/200mm, rapid traverse X/Y: 30m/20m/min, feed force X/Z: 11kN. Tool positions: 12, drive tool power: 7.8kW. Machine dimensions X/Y/Z: approx. 2700mm/1150mm/2800mm, weight: approx. 6500kg. Documentation available. On-site inspection is possible.
An EMAG CNC vertical lathe is available. Chuck diameter: 250mm, orbital diameter: 260mm, travel X/Z: 570mm/200mm, rapid traverse X/Z: 60m/30m/min, feed force X/Z: 5kN, ball screw diameter X/Z: 40mm, spindle bearing diameter front: 110mm, speed: 4500rpm, power: 18/28kW, shank diameter: 40mm, power of driven tools: 12kW, speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2700mm/2100mm/2400mm, weight: approx. 7000kg, switch-on time: 50416h, automatic time: 9016h. Documentation available. On-site inspection is possible.
turning speeds: 6000 U/min x-axis: 550 mm z-axis: 200 mm rapid traverse: 30/20 m/min feed: 11 m/min control: Siemens 840 C total power requirement: 35 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: m - speeds: [1/min.] : 6.000 - torque [Nm]: 480 - swing diam.: 290 mm - power: [kW] 34 - chuck diam. 200 mm - turret: 12-fach, VDI 40, Sauter - driven tools 7,8 KW, - x -travel: 550 mm - z- travel: 200 mm - rapid travel: (X/Z) [m/min] 30 / 20 - feeds: (X/Z) [m/min.] 11 KN - connected load: [KW] 36 kW - machineweight: [kg] 6.500 - chip conveyor, pick up conveyor links,300mm wide, Auswurfhöhe 800mm - Messsystem direkt-linear, Glasmaßstäbe in allen Achsen, Heidenhain - parts conveyor for feeding parts into the machine - Specification: - Overhauled in 2007 for approx. €50,000, complete headstock replaced. - Feed unit replaced The data for this ad was created with ModulMW ...
turning diameter: 250 mm turning length: 100 mm control: SIEMENS 840 D total power requirement: 35 kW weight of the machine ca.: 7500 kg dimensions of the machine ca.: m E M A G (Germany) Vertical CNC Controlled Hard Turning and Grinding machine with tool turret and workpiece handling System Model VSC 250 DS Year 2004 # M7 28.69324 _______________________________________________________ Turning Ø, max. 250 mm Turning length internal / external 100 mm Workpiece length min./max. 29 – 100 mm 6-positon tool turret Ø / swing-Ø 480/790 mm Workpiece spindle Slide travel, X / Z / stroke 680 / 400 / 200 mm Feed rate / Quick feed X/Z 45/30 m/min. Feed force X/Z 5,5/11 kN Spindle speed 4.300 / 6.000 rpm Spindle drive 28 kW Total electrical load, ...
Manufacturer: EMAG Model: VL 3 mLT Year of Manufacture: 2004 Type of Machine: Vertical Turning Lathe Data of VL3: - Lifetool available for powered tools - Interface for automation - additional inputs and outputs / M-functions - Shuttle operation - Machine was never driven wet (always dry) Electrical Specifications: - Working Voltage: 400/480 V - Control Voltage (General and Valves): 24 VDC - Frequency: 50/60 Hz - Current Supply: 3 AC - Rated Power: 31 kW - Rated Current: 48.40 A - Supply Fuse: 50 A Physical Specifications: - Total Weight: 5500 kg Find more here - / Contact us at -
Manufacturer: EMAG Model: VL 3 HW mLLT Year of Manufacture: 2008 Data of VL3: - Lifetool available for powered tools - Interface for automation - additional inputs and outputs / M-functions - Shuttle operation - Machine was never driven wet (always dry) Electrical Specifications: Current Supply: 3 AC Frequency: 50/60 Hz Working Voltage: 400/480 V Control Voltage - General: 24 VDC Control Voltage - Valves: 24 VDC Connection Value: 38 kW Rated Current: 58 A Supply Fuse: 80 A Physical Specifications: Total Weight: 5500 kg Find more here - / Contact us at -
turning diameter: mm swing diameter: mm turning height: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC vertical lathe Type: VL 5i F Manufacturer: Emag Year: 2016 number of axes : 2 max clearance diameter : 250 mm max part diameter : 220 mm machining height : 175 mm strokes (X/Z) : 660 / 300 mm quick feed (X/Z) : 60 / 30 m/min turret number of positions : 12 tool-holder : VDI40 spindle power : 28 /18 kW speed : 0 to 4.500 rpm index precision C axis : 0,001° part magazine capacity diameter 30 to 85 mm : 37 pos.,max 4.5 kg part magazine capacity diameter 30 to 160 mm : 22 pos.,max 8 kg part magazine capacity diameter 80 to 220 mm : 16 pos.,max 10 kg part height max : 175 mm voltage : 400 V installed power : 36 kW dimensions floor space: 2266 x 4184 mm height : 3200 mm weight : 7.500 kg Chip conveyor Machine in good condition, under power Find more here - / Contact us at -
turning diameter: mm swing diameter: mm turning height: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
- - -: - - - - - - - - -: - - - - - - - - -: - - - - - - Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
- - -: - - - - - - - - -: - - - - - - - - -: - - - - - - Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
