used WMW ZEULENRODA pye

Hydraulic single column press make WMW ZEULENRODA type PYE 160 S 1Machine -No: 057-007 / 38 built in 1974Max. Press force: 160 tRetraction force: 34 tRam stroke: 500 mmProjection: 360 mmInstallation height: 800 mmSpeed from: 0.2 m / min.Speed at: 0.125 m / min.av. Working speed: 92 mm / sSpeed at: 125 mm / sTable size: 900 x 630 mmBear area: 750 x 450 mmTable height: 800 mmOperating pressure: 160 kp / cm³Connected load: 17 kWDimensions L x W x H: 1250 x 2200 x 3650 mmWeight approx: 7 tWith- stroke limitation- Two-hand releaseused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Capacity: 250 t Stroke: 10 mm Distance column/center (Throat): 360 mm Table length: 900 mm Table width: 630 mm MAKE   WMW Zeulenroda TYPE     PYE 250 N YEAR    80 er SPECIFICATIONS Hydraulic / Mechanical HydraulicPress force   250 Ton Table Length x Width  900 x 630 mm Throat360 mm Die height   1000 mm Stroke Length   500 mm Power  11 kW DIMENSIONS Length    1250 mm Width     2000 mm Height   3800 mm  

Technical data: -maximum pressing force 40 t -maximum piston stroke 500 mm -Hoisting speed 0-40 mm / s -Return 0-200 m / min -Mounting height 750 mm -Projection up to mid slide 360 mm -Slide clamping surface 440 x 360 mm -Slide clamping pins 40 mm -Table size 630 x 500 mm -Table hole / breakthrough 200 mm -Table height above floor 710 mm -Oil quantity approx. 300 ltr -Drive 400 V / 4 kW -Space requirement approx. B H 1200 x 2800 X 1600 mm -Weight approx. 2500 kg

pressure: 10 t stroke: 400 mm feed down: 200 mm/sec feed up: 450 mm/sec max. distance table - ram: 630 mm total power requirement: 8,5 kW weight of the machine ca.: 1,3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t throat: 360 mm stroke: 500 mm table surface area: 1250x630 mm ram surface: 1000x450 mm table height: 1000 mm dayligth: 800 mm weight of the machine ca.: 8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Connected load: 4kW, weight: 2t, an inspection is possible.

Offer 23333 Specifications: - Max. pressing force 25 t - Max. ram stroke 500 mm - Lifting speed 0 - 2.4 m/min - Return 0 - 12 m/min - Installation height 800 mm - Projection to the middle of the ram 360 mm - Butt-running surface 440 x 360 mm - Plunger clamping pin 40 mm - Table size 630 x 500 mm - Table bore / opening 180 mm - Drive 400 V / 8.75 kW - Space requirement approx. W 800 x H 2720 x D 1150 mm - Weight approx. 2000 kg

pressure:160 t throat:360 mm stroke:500 mm total power requirement:17 kW weight of the machine ca.:7,2 t dimensions of the machine ca.:2,0 x 0,95 x 3,70 m table-size:900 x 630 mm Documents:vorhanden

pressure:160 t throat:360 mm stroke:500 mm Documents:vorhanden

pressure:40 t throat:360 mm stroke:500 mm distance table/ram, max. stroke up, adjustment up:660 / 1000 mm table surface area:630 x 500 mm hole in the table:200 mm table height over floor:1060 / 720 mm ram surface:450 x 360 mm speed down:60 mm/s speed up:300 mm/s power requirement:7,5 kW weight:2,75 t dimensions (WxDxH):1,0 x 1,8 x 3,05 m additional plate in table:height approx. 340 mm

pressure:25 t throat:355 mm stroke:500 mm distance table/ram, max. stroke up, adjustment up:800 mm table surface area:500 x 500 mm hole in the table:180 mm table height over floor:700 mm ram surface:250 x 250 mm power requirement:7,5 kW weight:2,1 t dimensions (WxDxH):1,45 x 0,9 x 2,55 m

pressure:100 t throat:360 mm stroke:500 mm distance table/ram, max. stroke up, adjustment up:800 mm table surface area:900 x 560 mm table height over floor:710 mm ram surface:630 x 400 mm speed down:200 mm/s speed up:200 mm/s power requirement:17,0 kW weight:5,0 t Dimensions (WxDxH):1,2 x 1,9 x 3,3 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2

PRESS DESIGN   drive system: hydraulic   frame design: C-frame, single sided   table cushion: yes PRESS FORCES   total force (nominal): 160 to PRESS TABLE   table surface (left-right): 1250 mm   table surface (front-back): 600 mm   thickness of bolster plate: 100 mm SLIDE   table surface (left-right): 750 mm   table surface (front-back): 450 mm   stroke: 500 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 200 mm/s   return velocity max.: 250 mm/s TOOL ASSEMBLY DIMENSIONS   distance table - slide max.: 800 mm   throat (C-frame): 360 mm ELECTRICAL SPECIFICATIONS   total power consumption: 20.5 kW   mains voltage: 380 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1250 mm ...

Eccentric C stand press, little used C frame - eccentric press, used Type: PED 63.3 S4 manufacturer: WMW Year of construction: 1994 Pressing power / rated pressure: 63 t Sheet thickness / material thickn. 3.2 mm Table size / surface of bed: 800 x 580 mm Hole in the table / hole in table: 300 mm diameter. Stroke / stroke of slide: 8... 120 mm Number / number of strokes: 56 / 90 / min Tappet adjustment / adjustment of slide: 70 mm The maximum distance between Table and plunger / max distance between table and slide: 560 m Projection / Cap: mm Power of main motor / power of main motor: 6 kW Weight / weight: 5.5 t

pressure: 63 t throat: - mm stroke: 16 - 125 mm table-size: 800 x 600 mm force: 250 cutting surface: 1600 mm² table adjustment range: 220 mm total power requirement: 6 kW weight of the machine ca.: 5 t distance table/ram: 562 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 355 mm stroke: 8 - 130 mm table surface area: 710 x 1200 mm T-slots at tabel: 3 clamping plate thickness: 75 mm no. of strokes: 50/80 Hub/min ram adjustment: 80 mm ram surface: 450 x 560 mm T-slots at ram: 2 tool shank hole (depth x diameter): 100 x 50 mm max. distance table - ram: 540 mm distance between columns: 400 mm connected load: 11,5 kW weight of the machine ca.: 9,0 t Overall size: 1,65 x 2,25 x 3,05 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length:2000 mm table width:600 mm table height:300 mm mounting surface:700 x 600 mm centre distance:1200 mm centre height:160 mm Dimensions (WxDxH):2,0 x 0,6 x 0,3 m

Double stand punching machine Control: UNIDOR Pressing force: 100 to. Stroke rate, continuously variable via PIV gearbox: 50 - 200 H/min. Table area: 1200 x 710 mm. Plunger area: 900 x 500 mm. Plunger stroke: min. 6 mm, max. 82 mm. Tappet adjustment: 100 mm. Distance, table - plunger: 387 mm. Diarrhoea opening in the press table: 120 x 400 mm. Incl. roller feed, type: WE 16, 130 x 3 mm. Weight: approx. 13500 kg. Abm. WxDxH: 2700 x 2400 x 3500 mm. Good operational condition. Freely loaded from location. The machine was demonstrably overhauled in 2021 for EUR 21,000.00. The machine can be inspected and demonstrated under power in consultation and is immediately available.

Hydraulic table-top press Fabr. VVB ZeulenrodaPressing capacity: 4 tTable size: 220 x 340 mmDischarge: 190 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

pressure: 63 t throat: - mm stroke: 16 - 125 mm max. distance table - ram: 417 mm ram adjustment: 70 mm no. of strokes: im Dauerlauf 80 Hub/min table surface area: 800 x 630 mm ram surface: 500 x 400 mm clamping plate thickness: 70 mm total power requirement: 6 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic punching machine Brand: Zeulenroda Raster Type: PDA 100 Year of construction: 1995 Control: Unidor Nominal pressing force: 1000 kN Continuous stroke: 50 / 200 min (PIV gearbox) Working capacity duration: 1700 / 3500 Nm Clutch torque: 23500 Nm Hydr. Pressure: 60 bar Braking torque: 8500 Nm Main drive: 18.5 kW Distance table Ram: 387 mm min. ram stroke: 6 mm ram stroke: 82 mm Ram position: 100 mm Ram surface: 900 x 500 mm Table surface: 1200 x 710 mm Diarrhoea opening: 120 x 400 mm Roller feed WE 16 Feed length: 6500 mm Max bandwidth: 160 mm Material thickness: 0 – 3 mm Cross section for steel: 300 mm² Feed length: 0.1 mm Roller diameter: 63 mm Belt speed: 40 m/min Dimensions: W: 2700 mm D: 2400 mm H: 3500 mm Weight: approx. 13500 kg The machine is in our warehouse. Viewing under power possible at any time. Repair/overhaul of th ...

Control: Unidor Nominal pressing force: 1000 kN Continuous stroke: 50 / 200 min (PIV gearbox) Working capacity duration: 1700 / 3500 Nm Clutch torque: 23500 Nm Hydr. Pressure: 60 bar Braking torque: 8500 Nm Main drive: 18.5 kW Distance table-to-ram: 387 mm min. plunger stroke: 6 mm max. ram stroke: 82 mm Plunger adjustment: 100 mm Plunger area: 900 x 500 mm Table surface: 1200 x 710 mm Drop opening: 120 x 400 mm Roll feed WE 16: Feed length: 6500 mm Belt width max.: 160 mm Material thickness: 0 – 3 mm Cross-section for steel: 300 mm² Roll diameter: 63 mm Belt speed: 40 m/min Machine dimensions: W: 2700 mm D: 2400 mm H: 3500 mm Weight: approx. 13500 kg The machine can be demonstrated under power.

pressure: 63 t throat: mm stroke: 8 - 120 mm no. of strokes: 135 Hub/min max. distance table - ram: 560 mm ram adjustment: 70 mm table surface area: 800 x 600 mm ram surface: 500 x 400 mm total power requirement: 12 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t throat: 315 mm stroke: 8 - 120 mm table surface area: 630 x 800 mm dayligth: 560 mm ram adjustment: 70 mm no. of strokes: 56/90 Hub/min ram surface: 400 x 500 mm total power requirement: 6 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: 1,5 x 2,2 x 2,75 m The following work is/was carried out on the machine. partial overhaul: - Machine is completely disassembled, checked - Machine is repainted - new press safety valve - New separate control cabinet with touch panel and ABB safety control - new shaft bearing - A current UVV test and braking time measurement is carried out before delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 400 t stroke: 600 mm dayligth: 900 mm clamping surface (lateral): 2500x1000 mm surface area: 2000x1500 mm hole in the table: 1500x200 mm total power requirement: 45 kW weight of the machine ca.: 32 t die cushion area: 100 mm die cushion area: Ø 150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.