TRACOPOWER tsp used machines

Power supply unit, DIN rail -Type: TSP 180-124 -Weight: 0.7 kg

Power supply unit, DIN rail -Type: TSP 180-148 -Weight: 0.7 kg

Power supply unit, DIN rail -Type: TSP 360-124 -Weight: 1.4 kg

Power supply unit, DIN rail -360 W, 24 V/1 5 A -Power supply output type: Fixed/Adjustable -AC input voltage: 85 V to 132 V, 187 V to 264 V. -Number of output channels: 1 -Nominal output voltage: 24 V -Output current max.: 15 A -Power output max.: 360 W -SVHC: No SVHC (19-Dec-2012) -Areas of application: Industrial -External width: 80 mm -Width: 80 mm -Input voltage change: 0.5 % -Frequency input-: 63 Hz -Frequency supply max.: 63 Hz -Power supply unit -Frequency supply min.: 47 Hz -Weight: 1.1 kg -Height: 125 mm -Load change: 0.5 % -Length: 125 mm -Length outside-: 125 mm -Mounting: DIN rail -Rated power: 360 W -Voltage output: 24 V -Voltage output max.: 28 V -Voltage output min.: 24 V -Current output: 15 A -Power supply type: switch mode -Depth outside: 125 mm -Supply voltage: 264 V -Supply voltage max.: 264 V -Supply voltage min.: 85 V

Power supply unit, DIN rail -Type: TCL024-112 -Weight: 0.3 kg

1 of used trayshrinkpacker, make KHS/Kisters, type TSP 80 V, new 2004. Operating side: right. Siemens S7 plc controls. Nordson hot-melt unit. Capacity upto 100 trays/minute. Last used for packing loose and pre-packed (film-only multipacks) beverage cans (standard 66 and sleek 58 mm) cans on tray with or without film as a total of 12, 18 and 24 cans per tray. Quick changeover via servos and spindels. Available beginning 2023.

1 of used trayshrinkpacker, make KHS/Kisters, type TSP 080V, new 2002. Operating side: right. Siemens S7 controls with Bosch/Rexroth/Indramat Servos. Capacity upto 80 cycles/minute. Originally used to pack 330/355 ml standard (D 66 x H 115/122 mm) beverage cans loose and pre-packed as either 6x3=18 or 6x4=24 on tray + film. Last used for 500 ml PET bottles (D 64 x H 204 mm) as 4x3=12 on tray + film.

1 of used tray-/padshrinkpacker, make KHS Kisters, type Innopack TSP 80 V with 180-degree (clockwise) curve and shrinktunnel, new 2004. Machine has an 8-lane infeed and is capable of producing trays (and/or) pads either single lane (i.e. 24 cans/bottles per tray/pad) or dual-lane (i.e. 12 cans/bottles per tray/pad) in shrinkwrap film (print-registered), at a maximum capacity of 80 cycles (i.e. 80/160 trays) per minute. Operating direction: from right to left as seen from operator\s station. With Allen Bradley Control Logix PLC / Panel View 1000, Indramat servo drives, ITW Quattro hot-melt unit. Both packer and shrinktunnel easily adjustable via servo\s and spindles for various formats as well as single-/dual-lane. Wired for 480V/60Hz. Various manuals available. Equipment in excellent condition!

Board repair line with double end profiling line in top condition !! Workpiece parameters of the plates: Min.: 900 mm x 200 mm Weight min. : 17 mm Max .: 5000 mm x 1250 mm Max. Weight: 60 mm Weight: max. 150 kg < Accuracy: +/- 0.2 mm The portals have a max. Clock power of: max. 6 cycles / min The max. Partial performance: 18 parts / min (DEP line) Year of construction 2008 Condition: good (Original price of the line 2008 Euro 4.9 million) Consisting of: * Feeding station with feeding rollers, * Automatic vacuum lifting table for lengths up to 6 m * Conveyor systems * Repair line 1 * Turning station * Transfer service * Repair line 2 * automatic vacuum lifter for stacking (6m) * Stacking roller conveyor * Control cabinet with machine control * Profilfraessanlage * Stacking Tables; very well

Manufacturer: Bargstedt Aufstapelgerät, Type: TSP 15 D, Year: 1995, Control: Homag, Stacking device: yes, Work piece length min mm: 400-2500, Work piece width min-max mm: 100-1300, Min.-max. workpiece length in mm: 400-2500, Min.-max. workpiece height in mm: 10-40, Stack height in mm: ca.900, Stack arrangement: mehrlagig, Workpiece weight/stack position in kg: ca.100, Inlet roller conveyor mm: yes, Outlet roller conveyor mm: no, Cycles approx.: ca.15, Feeding speed max m/min: 5-40, FREE TEXT: inkl Schaltschrank ohne Auslaufrollebahn, Year :1995

An ultrasonic welding system with two Telsonic TSP-3000-1P, cabin, generators and documentation is available. Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Siemens SIMATIC PANEL, length: 762mm, width: 854mm, height: 1316mm, weight: 130kg. On-site inspection is possible.

1 TUPESA sample rotary garment dyeing and washing machine type TSP-2-CP, high temperature high pressure machine, year 2001, capacity 2 Kg, drum diameter 470 mm, drum depth 250 mm, drum volume 42 L, dye cycle controller TUPESA type RS-1, drum rotation 0-28 rpm, machine equipped with centrifugation process of 450 rpm, 2 addition vats. Machine designed to work with temperatures up to 140 ºC. This type of machinery is suitable for dyeing all types of garments such as polyester, polyamides, synthetic blends, etc.

1 TUPESA rotary garment dyeing and washing machine type TSP-25-CP, high temperature high pressure machine, year 2008, capacity 25 Kg, drum diameter 1100 mm, drum depth 610 mm, drum volume 580 L, dye cycle controller TUPESA type RS-BASIC PLUS touch screen, drum rotation 0-28 rpm, machine equipped with centrifugation process of 700 rpm, 5 addition vats. Machine designed to work with temperatures up to 140 ºC. This type of machinery is suitable for dyeing all types of garments such as polyester, polyamides, synthetic blends, etc.

1 TUPESA rotary garment dyeing and washing machine type TSP-55-CP, high temperature high pressure machine, year 2004, capacity 55 Kg, drum diameter 1250 mm, drum depth 1100 mm, drum volume 900 L, dye cycle controller TUPESA type RS-1, drum rotation 0-28 rpm, machine equipped with centrifugation process of 650 rpm, 5 addition vats. Machine designed to work with temperatures up to 140 ºC. This type of machinery is suitable for dyeing all types of garments such as polyester, polyamides, synthetic blends, etc.

1 of used trayshrinkpacker, make Kisters (KHS) type 140/60, new 1989, operating side left. Fitted with Siemens S7 controls / HMI and Bosch Rexroth servo drive MI-technology in 2012. Nordson hot-melt unit Originally supplied to pack food cans as 4x3 and 6x4 on tray plus film. Last used for food cans as 6x2 and 4x3 on tray + film. Size-adjustable via spindles and servos. Maximum capacity 60 trays/minute (depending on product).

1 of used trayshrinkpacker, make Kisters (KHS) type 140/60, new 1989, operating side left. Fitted with Siemens S7 controls / HMI and Bosch Rexroth servo drive MI-technology in 2012. Nordson hot-melt unit Originally supplied to pack food cans as 4x3 and 6x4 on tray plus film. Last used for food cans as 6x2 and 4x3 on tray + film. Size-adjustable via spindles and servos. Maximum capacity 60 trays/minute (depending on product).

LASCO TSP 160 S forging press was built in Germany by Langenstein & Schemann A.G. (Lasco Umformtechnik GmbH). The machine has been continuously maintained and upgraded throughout its service life. In 2019, a major upgrade was carried out, which included replacing the seals, upgrading the control system, installing light curtains and adding a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel. The LASCO TSP 160 S is an extremely versatile hydraulic press designed for the production of extremely precise, repeatable and yet complex parts. It is ideal for forges and industrial plants that require high press forces and high repeatability of the manufactured parts. Its main purpose is die forging, metal stamping and metal forming, especially hot forming of steel or aluminium workpieces. It also enables punching, calibration of forgings, trimming and blanking of workpieces after the forgin ...

Used KRONES 32.000 bph one-way PET filling line Former products: Carbonised water, CSD, energy drinks Scope of machines: NEA high-pressure compressor (approx. 9,000 operating hours) NEA high-pressure compressor (approx. 18,000 operating hours) 2001 LOHENNER compressed air tank 5,000 Ltr. 2001 MTA RWD350C dry recooler (roof / outdoor installation) 2001/2002 MUCKI MD-3 preform feeder with tipper with 500 kg load capacity 2001/2001 TANNER SBT-2212 preform hopper with unscrambler 2001/2001 TANNER HFT-3510 preform vertical conveyor 2001/2001 TANNER preform sorter incl. ejection unit 2001/2001 TANNER AST-3006 preform slide incl. air rinser 2001/2001 TANNER VZT-2500 electrical cabinet 2001/2001 SIG COROPLAST BLOWMAX 12 stretch blow molding machine, max. 18,000 bph - (One blowing machine must be replaced!) 2001/2001 RIEDEL PC 630.01-NE preform cooler 20 ...

Used Used Complete Bottling Line KHS PET 54.000 bph: Year: 2014 Condition: Good Used Complete Bottling Line KHS PET: Product: Still water Speed: 54.000 BPH Year: 2014 Hopper Preform Preform Elevator Preform Orientator KHS InnoPET BloFill Blower PET: Model: Blowmax 24S 24 cavities Compressor AF: Model: CE46B Microfiltration system Filler: 72 mechanical valves Type of filling: Capper: Number of heads: Type of workable cap: Pre-threaded plastic Distribution system: pick & place Gebo Cap Elevator Model: CF 2024 Caps Orientator Inspector PRESSCO Model: Series V FHCP3X Conveyor belts Labeller PE: Model: Simpl-Cut Flex 1420-45-bl Year: 2021 Roll Fed Station Bottle Inspector Shrink Wrapper KHS Model: Innopack Kisters TSP Version: film launch 6 lanes Bundle 6?4 Type: Only film Palletizer KHS Model: Innpal PBL 1 N (H) RG 1 Type: clamps Interlayer system Storage pallet Storage layer Pallet wrapper  ...

Used Used 2009 Complete Bottling Line PET KHS 72.000 bph: Year: 2009 Condition: Good Used 2009 Complete Bottling Line PET KHS: Product: Still Water Speed: 72.000 BPH on 0.5 l Year: 2009 Cap Corvaglia 29/26 Tanner Preform Hopper Triblock KHS Preform Elevator Preform Orientator Blower PET: Model: Blowmax 36S Series IV Compressor AF Chiller Riedel CIP KHS Filler: 100 valves ? mechanical Type of filling: Gravity Capper (including elevator and cap orientator) Type of workable cap: Pre-threaded plastic Cap size: Corvaglia 29/06 Distribution system: pick & place Labeller PE Model: Simple cut KS177 Direction of rotation: counterclockwise Electronic cam plates stazione roll feed Bottle inspector Presco Model: intellispec Conveyor belts KHS Shrink Wrapper KHS Model: Innopack Kisters TSP Version: film launch Palletizer Alvey 942 Type: push Pallet storage Pallet wrapper Lantech Model: S1500 Type of  ...

Axle with hydraulic motors Rexroth MNR R921811314 Hydraulic hub motor Rexroth 2pcs Model Rexroth MNR:R921811314 CNR:- TYP: MCR5F470F180Z32B4M2WL 12SP SN:1938362 FD:12W40 7481 Ncjbmy Ex Iov Ea I Tspou Made in the United Kingdom Shipping weight: 221 kg

Fully automatic and integrated PET filling line for still water, designed for blowing, filling, sealing, labeling, inspection, secondary packaging, palletizing and pallet wrapping in a synchronized production process. Specifications Manufacturer: KHS Model Filling Line PET 54,000 BPH Year 2014 Condition Used Stock number 103814 Production of still water Capacity 54,000 BPH KHS InnoPET BloFill blowing, filling and closing block Blow molding machine KHS Blowmax 24S AF CE46B Compressor System Inspection Systems PRESSCO Series V FHCP3X Labeller Simpl-Cut Flex 1420-45-bl , 2021 Shrink packer KHS Innopack Kisters TSP KHS Innpal PBL 1 N (H) RG 1 palletizing system Lantech SLC-AUTO pallet wrapping, 2015

Used Used 2019 Complete PET Line KHS 70.000 bph: Year: 2019 Condition: Good Product: Still water Speed: 70.000 BPH Year: 2019 Hopper Preform M. Tanner Preform Elevator Preform Orientator Compressor KHS InnoPET TriBlock Blower PET Labeller: Electronic cam plates 2 Stations Wrap-around roll fed Filler: 96 mechanical valves Capper (including elevator and cap orientator) Type of workable cap: pre-threaded plastic Distribution system: pick & place Bottle inspector Shrink wrapper KHS Modello: nopack Kisters TSP Versione: a lancio di film Palletizer FKI Logistek Model: A-910 Type: Push Pallet Storage Interlayer system Pallet wrapper Lantech Type of wrapping: Rotating arm Pre-stretch Code: NP 692 More details: https://bottlingscout.com