From the TBA/3 Jaw System: pre-assembled complete yoke left hand and yoke right hand with left hand arm, right hand arm etc. Condition: Unused/new Subject to being unsold
Spare part for Tetra Pak TBA/3 filling machine: From the TBA/3 Jaw System, pre-assembled, complete: yoke left hand and yoke right hand with left hand arm, right hand arm Condition: unused/new Intermediate sale reserved
Used Conveyors as needed and at your Layout with Motors, Curves, etc.
Lifting and Turning Device for beverage paper roll consists of: Jumbo Reel Lifting and Turning Device for beverage carton paper rolls, your choice: manual (manufacturer BT), with battery electrical lifting (manufacturer Tetra Pak)or with battery electrical lifting and autom. hydr. turning (manufacturer BT)
Consists of: Tetra Pak Tray Shrink 51, Tetra TTS 51
Consists of: Tetra Multi Shrink, Tetra Pak TMS 72
Consists of: Tetra Multi Shrink, Tetra Pak TMS 67
he next development step of the basic opening solution in new shape and design for better usability. Better product flow is one of the key features. TCAP 21 ReCap 3 is a high quality and cost efficient closing solution. For Fillers with PT the ReCap 2 combines needs in quality and cost. Additional the Product get a real optimized functional and save closing solution. Option: Conveyors and Cardboard Packer with or without Wrap Around, Tray Shrink, etc...
The TCAP 21 ReCap 2 is a high quality and cost efficient closing solution. For Fillers with PT the ReCap 2 combines needs in quality and cost. Additional the Product get a real functional and save closing solution.
The TCAP 47 Applicator is one of the high quality closing solutions.Additional with Filler and PT one of the most usual opening and closing Solutions. The TCAP 47 combines a high quality opening and closing solution at high standart and compfort in daily use.
Tetra Pak (opt.WRAP AROUND) Tray Packer TCBP 70, year 2000.The TCBP 70 Packer is available as Multi-Infeed , MED, in various Volumes available at our warehouse. Nominal capacity 7000 p/h
PT 8 is the ideal combination for TBA 8. We offer this item according with our Filling Lines. Alternatvely a PT 10 can also be used.
The Filler is optional working with or without PT To complete an offer we have several machinery and equipment in our stock such as: Tray Shrink Packer, Shrink Packer, TCBP (TetraCardBoardPacker), conveyors, closing systems, etc. By request we take over different Service features including consulting and planning, transportation, assembling and installation. Do not hesitate to contact us for an detailed offer. Prior sales reserved for all offers.
Tetra Pak TBA 19 250 sl with Straw Applicator, consists of: Tetra Pak TBA 19 250 sl with Straw Applicator TSA Tubex 9001 To complete an offer we have several machinery and equipment in our stock such as: Tray Shrink Packer, Shrink Packer, TCBP (TetraCardBoardPacker), conveyors, closing systems, etc. By request we take over different Service features including consulting and planning, transportation, assembling and installation. Do not hesitate to contact us for an detailed offer. Prior sales reserved for all offers. Tetra Pak TBA 8 1000 sl with PT and TCAP ReCap 2 , used Tetra Pak, second hand Tetra Pak, TBA 8, TBA 9, TBA 19, TBA 21 Tetra Pak TBA 8 1000 sl with PT and TCAP ReCap 2 , used Tetra Pak, second hand Tetra Pak, TBA 8, TBA 9, TBA 19, TBA 21 Tetra Pak TBA 8 1000 sl with PT and TCAP ReCap 2 , used Tetra Pak, second hand Tetra Pak, TBA 8, TBA 9, TBA 19, TBA 21
Capacity/h: 7500 Pa/h Condition: excellent, ready for operation Tetra Pak TBA 19 200 Slim Line consists of: Tetra Pak TBA 19 250 Slim Line, Straw Applicator TSA Tubex 9001. Options: Packer, Conveyors,... To complete an offer we have several machinery and equipment in our stock such as: Tray Shrink Packer, Shrink Packer, TCBP (TetraCardBoardPacker), conveyors, closing systems, etc. By request we take over different Service features including consulting and planning, transportation, assembling and installation. Do not hesitate to contact us for an detailed offer. Prior sales reserved for all offers. Tetra Pak TBA 8 1000 sl with PT and TCAP ReCap 2 , used Tetra Pak, second hand Tetra Pak, TBA 8, TBA 9, TBA 19, TBA 21 Tetra Pak TBA 8 1000 sl with PT and TCAP ReCap 2 , used Tetra Pak, second hand Tetra Pak, TBA 8, TBA 9, TBA 19, TBA 21 Tetra Pak TBA 8 1000 sl with PT and TCAP ReCap 2 ...
Capacity/h: 7500 Pa/h Condition: excellent, ready for operation Tetra Pak TBA 19 200 Base Line consists of: Tetra Pak TBA 19 250 Slim Line, Straw Applicator TSA Tubex 9001. Options: Packer, Conveyors,... To complete an offer we have several machinery and equipment in our stock such as: Tray Shrink Packer, Shrink Packer, TCBP (TetraCardBoardPacker), conveyors, closing systems, etc. By request we take over different Service features including consulting and planning, transportation, assembling and installation. Do not hesitate to contact us for an detailed offer. Prior sales reserved for all offers.
Capacity/h: 6000 Pa/h Condition: excellent, ready for operation Tetra Pak TBA 8 LSC 1500 sl Filling Machine with PT 8 and TCAP 47 consists of: Tetra Pak TBA 8 LSC 1500 sl Filling Machine with PT 8 Ascrew cap Applicator TCAP 47, Packer TCBP 70 and Conveyors. To complete an offer we have several machinery and equipment in our stock such as: Tray Shrink Packer, Shrink Packer, TCBP (TetraCardBoardPacker), conveyors, closing systems, etc. By request we take over different Service features including consulting and planning, transportation, assembling and installation. Do not hesitate to contact us for an detailed offer. Prior sales reserved for all offers.
Capacity/h: 6000 Pa/h Condition: excellent, ready for operation Tetra Pak TBA 8 Slim Line 1000 ml Filling Machine with ReCap 2 consists of: TBA 8 1000 ml Slim Line Filling Machine, Pull Tab Applicator PT 10, Tetra Cap Screw Cap Applicator ReCap 2 and Packer TCBP 70. To complete an offer we have several machinery and equipment in our stock such as: Tray Shrink Packer, Shrink Packer, TCBP (TetraCardBoardPacker), conveyors, closing systems, etc. By request we take over different Service features including consulting and planning, transportation, assembling and installation. Do not hesitate to contact us for an detailed offer. Prior sales reserved for all offers.
Condition: excellent, ready for operation Tetra Pak TBA 8 1000 sl consists of:Tetra Pak TBA 8 1000 sl with Pull Tap PT 10, TCAP 21 ReCap 3 and Packer TCBP 70. To complete an offer we have several machinery and equipment in our stock such as: Tray Shrink Packer, Shrink Packer, TCBP (TetraCardBoardPacker), conveyors, closing systems, etc. By request we take over different Service features including consulting and planning, transportation, assembling and installation. Do not hesitate to contact us for an detailed offer. Prior sales reserved for all offers.
Capacity/h: 6000 P/h Condition: excellent, ready for operation Tetra Pak TBA 8 1000 ml Slim Line Filling Machine with Screw Cap Applicator TCAP 47 consists of: TBA 8 1000 ml Slim Line Filling Machine V100, Pull Tab Applicator PT 8, Tetra Cap Screw Cap Applicator TCAP 47. To complete an offer we have several machinery and equipment in our stock such as: Tray Shrink Packer, Shrink Packer, TCBP (TetraCardBoardPacker), conveyors, closing systems, etc. By request we take over different Service features including consulting and planning, transportation, assembling and installation. Do not hesitate to contact us for an detailed offer. Prior sales reserved for all offers.
Tetra Pak Tetra Therm Aseptic Visco Line for pasteurisation / sterilization of concentrated beverage bases by a Tubular Heat Exchanger (THE) system. Capacity 2.600 up to 8.150 liter per hour. At the current plant the line is used for products up to 100 °C. The indirect heating temperature is up to a maximum of 135 °C. Holding time set at 0 / 5 / 10 seconds. CIP Cleanable., In the Tetra Therm Aseptic Visco system, heating and cooling will take place in Tetra Spiraflo MTC tubular heat exchangers. Modules with a narrow ring section are used for heating and cooling to ensure optimal heat transfer. The product is pre-heated in stages within the Spiraflo tubular heat exchangers. The Spiraflo tubular heat exchanger is equipped with a sliding O-ring system. This means that the product and the outer tubes are not welded together. This prevents stress corrosion cracking and minimizes maintenance ...
Tetra Pak Aseptic Dosing unit F is a unique and innovative new technique where functional ingredients are injected with high precision into the base product after the final heat treatment, just before filling. Used for UHT applications, providesautomatic aseptic in-line dosing of ingredients. Ingredients that are suitable for aseptic dosing by the Tetra Pak Aseptic Dosing Unit F: dose sensitive ingredients like enzymes e.g. lactase, vitamins, minerals, Omega 3, probiotics, flavours, colours in everything from plain milk to formulated products. The system ensures the survival and stability of heat sensitive function that the charachteristics of the ingredients are not changed. It fits with any filling machine with a capacity between 1.000 - 20.000 l/hr with a continuous flow. The Tetra Pak Aseptic Dosing unit F is fully automated and installed between aseptic processing and the aseptic fi ...
The Tetra Pak TBA 9 is a type of filling machine designed for the aseptic packaging of liquid food products. Here are some key details:, - Type of Packaging: The TBA 9 is known for its ability to handle a variety of liquid products, such as juices, dairy, and sauces, using Tetra Paks carton systems., - Capacity: This filler typically has a capacity range suitable for small to medium production lines. It can fill various carton sizes, including the 200 ml format., - Aseptic Technology: The TBA 9 uses advanced aseptic technology to ensure that products are safely packaged without the need for preservatives, extending shelf life while maintaining product integrity., - Features:, - High efficiency and low waste during the filling process., - Flexibility to switch between different carton formats and sizes., - User-friendly interface for easy operation and monitoring., - Applications: Ideal f ...
Tetra Pak Tetra Spiraflo Tubular Heat Exchanger (THE) previously used in a dairy for whey protein as pre-heater with indirect hotwater preparation (15 - 70 °C), holding section (1 - 3 minutes) and cooling section (65 - 10 °C)., Unit exist out of:, - 7x tubes for pre-heating (Tetra Pak MT-38/1x20s-6, total surface area: 2,25 m2, product connection DN25, hotwater connection DN20 with indirect hot water system with plate heat exchangers, pumps (CH18-10 A-W-G-BQQV - 7,5 m3/h - 0,72 kW), steam valves (Samson), expansion vats, manual valves and interconnecting piping., - 9x tubes for cooling (Tetra Pak MT-70/4x16s-6s-1, jacket: 20 bar - 110°C - 16 liter, inside: 50 bar - 110 °C - 3,6 liter, total surface area: 10,17 m2, product connection DN38, (ice)water connection DN50)., - Flowmeter (Endress+Hauser - Promag 300)., - Holding tube, DN 40 (6x 6 meter), complete with bracket and swivel bend ...
Unused Inlet Device, Clamp coupling for Tetra Pak 618 - 718 - 818 Separators., Ref 22 - Part No 548412 01 - Inlet housing, Ref 23 - Part No 538247 04 - Clamp coupling, Ref 24 - Part No 538248 03 - Gasket, Ref 25 - Part No 541709 80 - Elbow pipe, Type of Machine: Inlet device, clamp coupling
Unused Outlet Pipe + Sleeves + Impellors of a Tetra Pak HMRPX 618 Separator., Ref 1 - Part No 540493 02 - Outlet pipe, Ref 3 - Part No 581978 01 - Guide sleeve, Ref 16 - Part No 540527 02 - Impellor bottom part Ø 140 mm, Ref 20 - Part No 540519 02 - Impellor top part Ø 140 mm, Ref 26 - Part No 540551 01 - Spacing sleeve, Ref 38 - Part No 540528 02 - Impellor bottom part Ø 120 mm, Ref 40 - Part No 540520 02 - Impellor top part Ø 120 mm, Type of Machine: Outlet set
Tetra Pak automatic direct standardisation unit which is designed to handle skimming of whole milk and standardisation of cream or standardisation of both cream and milk. Skid mounted unit including PD340 Magnetic flow transmitter for standardised milk, PD340 Magnetic flow transmitter for cream remixing, PD340 Magnetic flow transmitter for standardised cream, density transmitters, valves, some interconnecting piping and a control panel with recorder of fat content, display for flowtransmitter and Alfa Laval Alfast Operator Panel. Previously used in combination with an Alfa Laval HMRPX 714 HGV-74C milk skimmer separator (20.000 liter per hour)., Additional features:, Some clamps for connection / piping are missing., Type of Machine: Standardisation unit for milk, Capacity: 20.000 ltr/h, Weight: ± 500 kg, Dimensions: ± 120 x 120 x 220 cm
Unused Tetra Pak Pressure Gauge, 0 - 10 bar / 0 - 1.0 MPa., Model: 233.50.100 LBM 990.22 1 1/2 Tri-clamp 10bar/MPa., Part No: 90522-0172., Type of Machine: Pressure Gauge
Tetra Pak desserts pilot UHT plant with an pasteurisation, indirect and/or direct (VTIS) heating module @ 225 ltr/h and only a pasteurisation step @ 125 ltr/h, previously used in a R&D centre for desserts., Indirect unit, skid mounted, including:, - Open level tank, serial number: DFB-5259-BT01, year 2008, 50 ltr with propellor agitator (Lightnin ECL-M59-25)., - Feed pump (mono / screw pump, Netzsch, NM031BH02S12H, serial number 387231, year 2007, 120 - 300 ltr/h, speed 20 - 80 rpm, discharge pressure 2 bar, product temperature 5 - 20 °C)., - Lobe pump, Alfa Laval, SRU1/005/LD, serial number 431441, year 2008, motor: 0,37 kW, 400 V, 50 Hz, n1: 1.360 rpm, i: 15,57 n2: 89 rpm., - Heating module A, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17997., - Heating module B, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17999., - Heating module C, centrifugal pump: Al ...
Lower filling pipe, previously used on a Tetra Pak A3 Flex 250 ml Slim 100V., Type of Machine: Aseptic carton filling machine, Dimensions: 84 x 9 x 9 cm, Weight: 2 kg
.JPG)
.jpg)
.jpg)
.JPG)
.JPG)
.JPG)
.jpg)
.jpg)
.jpg)
.jpg)
