used STEINER hts

Hydraulic guillotine shears STEINER type HTS 30/20 R Masch. No. 315 Year of construction 1982 Cutting length 3050 mm Cutting thickness 20 mm Backgauge 800 mm controlled Motor power approx. 30 kW Mains connection 400 Volt, 50 Hz - Backgauge with positioning control ELGO - Backgauge adjustment via ball screws - Safety light barrier SICK front as intervention protection - 3 pieces of material support arms with ball castors - electric foot switch - spare knife Space requirement of the basic machine L x W x H 4650 x 2610 x 3200 mm Weight of the basic machine 27000 kg Space required for transport (basic machine) L x W x H 4650 x 2610 x 3200 mm Space requirement for transport (additional) L x W x H 3500 x 2450 x 1400 mm Weight complete 27000 kg Mechanically in very good condition Hydraulic problems, Electrical control in need of overhaul.; used

sheet width: 3050 mm plate thickness: 16 mm distance between columns: - mm back stop - adjustable: 1000 mm total power requirement: kW weight of the machine ca.: 15 t Acc.: electr. back gauge with DRO, table extensions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3000 mm plate thickness: 16 mm distance between columns: 3200 mm throat: 310 mm stroke: 300 mm table width: 820 mm table height over floor: 1215 mm Number of downholders: 12 St. cutting angle: 0,5 - 2,5 ° total power requirement: 30 kW weight of the machine ca.: 19 t Machine was overhauled in 2010 and was modernized with light barrier at table. Machine will be sold with automatic back stop with DRO. including flat belt conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power: 8,3 kW - Amperage: 67 A - Voltage: 124V. DC - 100% ED Magnet L x W: 1.406 x 1.350 mm - Conveyor belt: 1.400 mm - AA.: Ca. 2.300 mm - With Transformer rectifier of 380V. Primary

Working length: 4000mm, pressing force: 3000kN, distance between the columns: 3550mm, table width: 500mm, installation height: 460mm, connected load: 30kW, weight: 30t, with accessories and documentation.

Power: 56,1 kW - Amperage: 173 A - Voltage: 300V. DC - 100% ED Magnet L x W: (1.800 + 2 x 450=) 2.700 x 1.600 mm - Conveyor belt: 1.600 mm - AA.: Ca. 4.500 mm

Power: 14 kW - Amperage: 63,58 A - Voltage: 220V. DC - 100% ED Magnet L x W: (1.400 + 2 x 420=) 2.240 x 1.360 mm - Conveyor belt: 1.400 mm - AA.: Ca. 2.900 mm - With Transformer rectifier of 380V. Primary

Used machine in good condition. Available for immediate delivery. - Pressure force: 120 t - Bending length: 3.050 mm - Axes: 4

Steinert Electric Magnet Roll Brand : Steinert Roll length 1000 mm, Ø 700 mm. Power requirement magnet 1.6 kW. Inclusive rectifier 2 pieces in stock.

Steinert Electric Magnet Strap Brand: Steinert *2 pieces: length frame A.A.= 1800 mm Strap width : 800 mm Drive: 1.5 kW clip-on gearbox Block : 1000 x 750 x 400mm Inclusive rectifiers. *1 piece: length frame A.A.= 2200 mm Belt width : 1000 mm Drive: 2.2 kW slip-on gearbox Block : 1400 x 950 x 450mm Inclusive rectifiers. *1 piece: length frame A.A.= 3300 mm Belt width : 1900 mm Drive: 4 kW slip-on gearbox Block : 2400 x 1800 x 600mm Inclusive rectifiers.

Steinert Electric Magnet Strap Brand: Steinert Dim. conveyor belt: A.A.= 2400 mm Belt width : 1200 mm Propulsion: 3 kW slip-on gearbox Dim. Block : 1400 x 1150 x 630mm Power requirement: 6.5 kW Rectifier included. (new)

- Non-ferrous eddy current separator type STEINERT - for the sorting of non-ferrous metals such as aluminium or copper - Belt width 1500 mm - incl. control cabinet - Condition outdated -ready for action

Belt withness; 2.000 mm. (new belt) - With new control-unit . Eddy current separator is overhauled, sandblasted and painted.

Belt withness; 1.500 mm. (new belt) - With new control-unit . Eddy current separator is overhauled, sandblasted and painted.

Belt withness; 500 mm. - With control-unit, 2 Pcs. Conveyor belts, Stainless steel Feeder and Frame.

Power: 4,3 kW - Amperage: 45,3 A - Voltage: 94V. DC - 100% ED Magnet L x W: 1.260 x 940 mm - Belt: 1.000 mm - AA.: Ca. 1.700 mm - With new transformer of 380V. Primary

Description: . Approx. Onsite Dimension. (l x w x h): 1,100 x 1,100 x 1,500 mm, weight approx.: 650 kg

Description: Load capacity 2000 kg including charger see pictures Approx. Onsite Dimension. (l x w x h): 400 x 280 x 450 mm, weight approx.: 700 kg

Continuous tunnel pasteurizer, make Steiner, type TP 900/5000, year 2012, for continuous pasteurization of e.g. jam in jars,, Usable belt width: 900 mm,, Usable tape length: approx. 5,000 mm,, Adjustable throughput times: 11.26 - 49 minutes,, Nominal throughput time: 29 minutes,, 4 circulation pumps (1.1 kW),, Holding zone (5min), 3 cooling zones (each 8 minutes),, Max. container throughput height: 220 mm,, energy consumption at cont. Operation: approx. 70 kg steam / h,

Pump Manufacturer: Lowara (Italy) Type: HTS 32-125 N°: 90 Power: 3 kW Flow rate: 12-33 m3/h at 26-18.8 m height (water) LWH: 600 x 300 x 360 mm

AUTOOL HTS708 Automotive Dry Ice Cleaning Machine AUTOOL HTS708 Automotive Dry Ice Cleaner is a multi-purpose cleaning machine for the automotive repair and service field, which can be specially used for car engine carbon cleaning. The dry ice particles are accelerated by a high-speed airflow to remove carbon deposits. The cleaned dry ice evaporates in the environment and is safe and residue-free without damaging the vehicle. It can be used to clean the engine compartment, cylinder combustion chamber, intake valve, throttle valve and other carbon deposits, which serve the purpose of multi-purpose cleaning and maintenance. The device is particularly outstanding in terms of safety, reliability, intelligence and ease of use. Well designed The overall structure of AUTOOL HTS708 auto dry ice cleaner is simple, lightweight and practical. This device is equipped with a trolley bar, a  ...

Maximum Diameter: 25 mm // Minimum Diameter: 12 mm

Two-shaft Mobile shredder Engine: CAT Power: 194 kW/222kW (blocked power 2000 rpm) Working length: 1900 mm Working width: 1040 mm Dimensions LxWxH 9000x2450x3150 mm, approx. 16 t Overband magnet: Permanent Steinert

DATA ON THE MACHINE Machine type: Machine landing gear / Tank rolls Manufacturer: HTS Model: ECO-Skate I90L-I90S / 18t Payload Year of construction: new Condition: new Location Warstein , Germany Reference MZ-HTS-ECOSKATE-I90L+S-DP Description We offer you a new transport suspension from the manufacturer HTS / made in Germany consisting of Train drawbar Type:I90L Roll count: 12 / Material PU Height: 110mm Payload: 9t Weight: 57kg And Paralell suspension type: 90S Roll number 12 / Material PU Height: 110mm Connecting rod: 460-1145mm Payload: 9t Weight: 36 kg Further technical data on request. Not the chassis you're looking for? We are happy to offer you heavy-duty suspensions in various sizes up to 176t payload. Our offer is aimed at professionals who are covered in accordance with the Trade Code in accordance with Section 14 GewO. The offer i ...

DATA ON THE MACHINE Machine type: Machine landing gear / Tank rolls Manufacturer: HTS Model: ECO-Skate I30L-I30S / 6t payload Built: 2020 Condition: new Location Warstein , Germany Reference MZ-HTS-ECOSKATE-I30L+S-DP Description We offer you a new transport suspension from the manufacturer HTS / made in Germany consisting of Train drawbar Type:I30L Roll count: 4 / Material PU Height: 110mm Payload: 3t Weight: 14kg And Paralell suspension type: 30S Roll number 4 / Material PU Height: 110mm Connecting rod: 120-880mm Payload: 3t Weight: 14 kg Further technical data on request. Not the chassis you're looking for? We are happy to offer you heavy-duty suspensions in various sizes up to 128t payload. Our offer is aimed at professionals who are covered in accordance with the Trade Code in accordance with Section 14 GewO. The offer is subject to chang ...