We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Due to the increase in production capacity and the incorporation of new equipment, we offer the following WEDM (wire electroerosion) machine for sale: Sodick AQ400L. Machine in operation: it can be seen and tested. Extras: it has a wire cutter and accessories for cutting with a Taperflex table (high inclinations).
used
Sodick AQ750L EDM Wire Cutting Machine X : 750 mm Y : 500 mm Z : 400 mm Machine is in very good condition
used
Sodick AQ900L EDM Wire Cutting Machine X : 900 mm Y : 600 mm Z : 400 mm (U/V)mm 900X620 Machine is in good condition
used
Sodick AQ535L WEDM machine. Well looked after and still in production. Linear motors, so still accurate. With wire chopper.
used
Description: maximum workpiece weight 500 kg auxiliary table travel 120x120 mm wire feed speed 420 mm/s  , Includes Machine body 2250x2400x2120 mm Unit CKDHYW 1947C-7SD1G , collecting unit 700 x 700 x 1000 mm , JUMBO FEEDER reel holder unit 400x400x2100 mm Chiller unit 700x500x600 mm The winning bidder-buyer must reimburse Surplex for supervision costs of €300.00 per day. z-motion: 250 mm, x-motion: 370 mm, y-motion: 270 mm, control: SODICK LQ33W, weight approx.: 3,500 kg, Approx. Onsite Dimension. (l x w x h): 2,250 x 2,400 x 2,120 mm
used
Description: maximum workpiece weight 1000 kg auxiliary table travel 120x120 mm wire feed speed 420 mm/s  , Includes Machine body ,2600x2800x2310 mm JUMBO FEEDER coil holder unit 400x400x2100 mm External chiller unit TFE 700x400x1200 The winning bidder-buyer must reimburse Surplex for supervision costs of €300.00 per day. z-motion: 350 mm, x-motion: 570 mm, y-motion: 370 mm, control: SODICK LP33W, weight approx.: 5,000 kg, Approx. Onsite Dimension. (l x w x h): 2,600 x 2,800 x 2,310 mm
used
X : 350 mm Y : 250 mm Z : 250 mm Machine is in good condition
used
X : 550 mm Y : 350 mm Z : 300 mm Machine is in good condition
used
X/Y/Z axis travel (mm):750 x 500 x 400 U/V axis travel (mm):770 x 520 Work tank dimensions (W x D x H, mm):1264 x 973 Max. workpiece weight (kg):1500 Distance from floor to table top (mm):1000 Machine dimensions (W x D x H, mm):2100 x 2860 x 2390 Machine weight (kg):5600
used
Description: Zusätzliche Achsen , U/V 120 x 120 mm, , Arbeitsbehälter , Abmessungen 850 x 640 mm, , maximale Werkstückhöhe 240 mm, , max. Werkstückgewicht 500 kg, , Drahtvorschub Seilspannung 3 bis 23 N, , max. Drahtspulengewicht 8 kg, , Dielektrischer Tank , Abmessungen 650 x 2080 x 2050 mm,  ,Leergewicht 400 kg, , Fassungsvermögen 600 l z-motion: 250 mm, x-motion: 370 mm, y-motion: 270 mm, table surface area l x w : 606x396 mm, weight approx.: 3,400 kg, Approx. Onsite Dimension. (l x w x h): 2,200 x 2,200 x 2,200 mm
used
Key data: 350 _Unknown / Other, 250 Sodick, 220
Longitudinal X: 350 mm Cross Y: 250 mm Vertical Z: 220 mm Ampere: 0 A CNC Brand: _Unknown / Other CNC Model: Sodick Make: Sodick Type: A325 Mark25 Control: Sodick MARK 25 YOP: 1998 U Axis 80 mm V Axis 80 mm X-Axis: 350mm Y-Axis: 250mm Z-Axis: 220mm Table size L x W / or ø:600 x 400 mm Table load: 450Kg Length: 2.250 mm Width: 2.450 mm Height: 2.400 mm Weight: 3.000 kg
used
Wire EDM machine SODICK A 600 manufactured in 1997. Technical parameters of the SODICK A 600 EDM machine: - table travel (X axis): 600 mm - table travel (Y axis): 400 mm - Z axis travel: 270 mm - maximum dimensions of the processed part (width x depth x height): 800 x 550 x 260 mm - maximum weight of the workpiece: 900 - auxiliary table travel (U axis x V axis): 70 x 70 mm - wire diameter: 0.1 ~ 0.3 mm - maximum wire speed: 250 mm / sec. - wire tension: 0.2 ~ 2.8 kgf - cutting inclination at an angle: + -15 degrees per 100 mm of thickness - height from the floor to the surface of the working table: 1000 mm - machine tool dimensions (width x depth x height): 2188 x 2645 x 2100 mm - machine tool weight: 3700 kg
used
BRAND: SODICK YEAR: 2016 MODEL: VL600Q PRODUCTION HOURS: 9958 APPLICATION TYPE: EDM LOCATION: CZECH REPUBLIC MACHINE TYPE: EROSION MACHINE AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 2620 MM MEASUREMENTS DEPTH: 2605 MM MEASUREMENTS HEIGHT: 2080 MM MACHINE WEIGHT: 3140 KG CONTROL UNIT BRAND: SODICK MODEL: LN2W MAIN DRIVE WIRE DIAMETER: 0.1-0.3 MM MOVEMENT X-AXIS MOVEMENT: 600 MM Y-AXIS MOVEMENT: 400 MM Z-AXIS MOVEMENT: 270 MM WORKPIECE WORKPIECE WEIGHT: 850 KG TABLE OUTER LENGTH: 1040 MM OUTER WIDTH: 780 MM Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - U X V AXIS TRAVEL 90 X 90 MM - WIRE FEED SPEED (MAX. ) 420 MM/SEC - WORKING TANK DIMENSIONS (W×D) 1040 X 780 MM - MACHINING AT AN ANGLE (WORKING HEIGHT 120MM) +/- 15 DEGREES - WIRE TENSION 3-23 N - DISTANCE FROM FLOOR TO TABLE ...
used
This SODICK ALC600G Erosion machine was manufactured in the year 2019 in Thailand and has less than 1000 production hours. It is equipped with a SODICK CELADA control unit.
used
This Sodick VL600Q Erosion machine was manufactured in the year 2017 in Thailand. It is equipped with a SODICK control unit.
used
This Sodick VL600Q Erosion machine was manufactured in the year 2016 and has 9958 hours. It is equipped with a Sodick LN2W control unit. The machine has a Wire diameter of 0.1-0.3 mm.
used
This SODICK VL 400Q Erosion machine was manufactured in 2017 in Hungary. It has a movement range of X400mm, Y300mm, Z220mm. Its tank Size is 860mm x 690mm and its control type is LN2W SODICK. Contact us anytime for further information.
used
This SODICK ALC400P Erosion machine was manufactured in the year 2020 in Thailand and has 3450 operating hours. It is equipped with a Sodick Motion Controller. The machine has a ceramic work surface. Contact us anytime for further questions.
used
This SODICK AG40L erosion machine was manufactured in the year 2020 and has 355 production hours. It is equipped with a SODICK LN2 control unit. The machine disposes of a SVC circuit for superfine surfaces and graphite electrode machining. Contact us anytime for further questions.
used
Control Sodick Mark XI Travels X / Y / Z: 350 x 250 x 280 mm Travel C: 360 ° 16-fold tool changer extinguishing system
used
Sodick VL600Q EDM Wire Cutting Machine Machine is in good X : 600 mm Y: 400 mm Z : 270 mm
used
Sodick AQ-750L EDM Wire Cutting Machine Machine is in working condition 750X500X400
used
BRAND: SODICK YEAR: 2002 MODEL: AQ750L APPLICATION TYPE: EDM LOCATION: HUNGARY MACHINE TYPE: EROSION MACHINE AVAILABILITY: IMMEDIATELY Technical Information MOVEMENT X-AXIS MOVEMENT: 750 MM Y-AXIS MOVEMENT: 500 MM Z-AXIS MOVEMENT: 400 MM V-AXIS MOVEMENT: 520 MM U-AXIS MOVEMENT: 770 MM TABLE OUTER LENGTH: 1050 MM OUTER WIDTH: 750 MM HEIGHT ADJUSTMENT: 400 MM TABLE LOAD: 1500 KG Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - WITH LINEAR MOTORS ON THE X, Y, U, V AXES - LINEAR GLASS SCALE WITH 0. 1 ΜM RESOLUTION ON ALL AXES - NO BACKLASH - DIELECTRIC COOLING UNIT - CERAMIC COMPONENTS - LAN NETWORK - LQ1W WITH CNC CONTROL - AUTOMATIC WIRE THREADER (AWT) - STANDARD L-CUT WIRE CUTTER - 13" LCD SCREEN LAN CONNECTOR
used
Sodick VL400Q EDM Wire Cutting Machine Like New Machine is like new Number of working hours : 5000 (April 2022) X - Axis Travel 400 mm Y - Axis Travel 300 mm Z - Axis Travel 220 mm U, V Axis Travel 80 x 80 mm Wire Diameter Range (min ~ max) 0.10 ~ 0.30 mm Work Tank Dimensions (W x D) 860 x 690 mm Maximum Workpiece Weight 500 kg Distance From Floor to Table Top 900 mm
used
Inv. Num. : 6949 Type: VL600 Q Producer: SODICK Created: 2015 Parameters: Table length: 1040 mm Table width: 780 mm Max. travel length of the X-axis: 600 mm Max. travel length of the Y-axis: 400 mm Max. travel length of the Z-axis: 270 mm Minimum wire thickness: 0.1 mm Maximum wire thickness: 0.3 mm Machine height: 2080 mm Machine length: 2605 mm Machine width: 2620 mm Machine weight: 3140 kg