SIDEL used machine for sale

Sidel Cermex SW 21.40 case packing machine Sidel Cermex SW 21.40 case packing machine Manufacturer: Sidel Type: SW 21.40 Year of manufacturing: 2009 Available: Immediately Speed max: 11,000 cartons/min Length: 150/450 mm Width: 140/375 Hight: 110/400

Blowing machine SIDEL SBO 16 / 20 capacity: approx. 25.000 bph - by 2,0 ltr. PET bottles year of manufacturing: 2011 working hours: 37.000 max. capacity: 32.000 bph neck type: 38 mm widemouth neck includes: - preform tipper - preform hopper / elevator - Sidel AGR preform disinfection - Sidel Predis Ultra Clean - vulcanic water/oil thermoregulator - electrical cabinet - control panel - Sidel PCC The machine is in an excellent conditon.

W 84 | BLOW MOULDING MACHINE SIDEL YEAR: 1998 SPEED: 7.200 BPH SUL 1.5 L MODEL: SBO 6/10 SERIE 1 NUMBER OF CAVITIES: 6 BOTTLE NECK FORMAT 29/25 MM PREFORM ELEVATOR/ORIENTATOR STAMP NOT INCLUDED WORKED HOURS: 47.000 SAFETY PROTECTIONS

W 85 | PET BLOWER SIDEL SBO 6 YEAR: 1999 SPEED: 7.800 BPH MODEL: SBO 6 SERIE 2 NUMBER OF CAVITIES: 6 PREFORM TIPPER SIDEL HOPPER AND PREFORM FEEDER SIDEL STAMP NOT INCLUDED SAFETY PROTECTIONS

Sidel SBO 20 Universal Aseptic Bottling line - Capacity: up to 40.000 bph by 500 ml / 28.000 bph by 1500 ml Products: fruit juices Bottle formats: 200 ml, 500 ml, 1500 ml, 1750 ml Year of manufacturing: 2011 consisting of: 1. SIDEL SBO 20 Universal PET blowing machine, year of manufacturing: 2011 composed of: – preform tipper – preform hopper, unscrambler and infeed rail – Sidel ARS system HP air low consumption – Eco2 oven with 20 heating modules for 38 neck – blowing station for 20 quick change shell molds, – Compressor ABC 4HP-4-LT complete but without cooling tower moulds are not included 2. Sidel Rafale air conveyor system from exit Sidel blower to entry Sidel aseptic filler with curves etc – length approx. 250 meters also with full automation & drive and electrical panels. 3. Sidel Sensofill FMA 80/24K BS 13 aseptic tribloc, composed o ...

Original Molds for SIDEL SBO 10 totally 12 sets, year 2017 JADE has 12 sets of 10+1 pc PET bottle blow molder aluminum molds for sale, all made by SIDEL France in year 2017. Molds were used in SIDEL SBO 10 blow molder with energy saving air recovery system type SIDEL AirEco. Molds are for PET bottles from 250 ml to 2.0 liters with neck standard PCO 1881 (short neck) product being still and sparkling water. This SBO 10 was operated only 16 months (with 12 sets of molds) and thus molds are in excellent condition. Delivery will include also standalone shelves for holding the moulds safely in production and two sets of stretch rods

Manufactured: SIDEL SBO 16/20 Universal Eco2 Predis ultra clean YOM: 2011 Nominal capacity: 32.000 bph Current capacity: 25.600 bph in 2.0 L rect. Number of molds: 16 Equipped: with Sidel ARS air recycling system Neck personalization: 38 mm Unit complete with: •Preform tipper, hopper and feeder •Preform disinfection •Sidel ultra clean Predis

SIDEL type SBO 6 Serie 2 Year: 1999 Capacity: 7.800 bph Number of moulds:: 6 Equipped : quick change for shell molds Oven type : Sidel caterpillar oven Neck personalization: still mineral water 30/25 Working hours: low working hours Machine equipped with: Sidel preforms tipper Sidel preforms hopper & feeder Sidel electrical cabinet & PCC including HP compressor & chiller also Sidel air conveying system Equipment in good condition Available immediately

Labelling machine SIDEL Type Rollquattro F 15 Year of manufacturing: 2011 Capacity: approx. 25.000 bph Bottle formats: 500 ml / 750 ml / 1000 ml / 1500 ml running direction: parallel machine with Siemens S 7 control to label OPP labels from the roll on PET bottles with hot glue The machine is in an absolute top condition and still in production until January / February 2024. The machine is well maintained by SIDEL technicians. All maintenance records are available.

SIDEL SBO 6/10 series 1 PET blow-moulding machine for 6 moulds Linear oven with 10 modules Capacity 7.200 bph, equipped for quick change moulds Personalization for preform neck 29/25 Machine supplied with preforms hopper, unscrambler and infeed rail Sidel electrical panel, PCC drive and control panel Huge set of spare parts valued at 30.000€ included Dismantled february 2023 and stored in our warehouse. Excellent machine with low working hours. Very attractive pricing. Available immediately

Blowing machine SIDEL SBO 14 / 14 Universal year of manufacturing: 2006 neck type: 28 mm PCO 1810 capacity: 22.000 bph Electric: Siemens 400 Working hours: approx. 40.000 hours

Blowing machine SIDEL SBO 14 Universal year of manufacturing: 2007 neck type: 38 mm widemouth capacity: 25.200 bph incl. preform feeding system without chiller and moulds

Blowing machine SIDEL SBO 20 Series II year of manufacturing: 2000 capacity: up to 28.000 bph neck size: PCO 28-1881 inclusive: Preform feeding system and chiller The machine is still installed and in production in Germany until approx. November / December 2022

Blowing machine SIDEL SBO 20 Series II year of manufacturing: 2001 capacity: up to 28.000 bph neck size: PCO 28-1881 inclusive: Preform feeding system and chiller The machine is still installed and in production in Germany until approx. November / December 2022

SIDEL SBO 14 Universal PET blow-moulding machine for 14 moulds. The manufacturing year is 2006 and the capacity is of 28.000 BPH. The machine is equipped with a quick change or shell moulds. Personalization for preform neck PCO28 1810. Machine equipped with: - Preforms tipper - Preforms hopper - Electrical cabinet - Sidel control panel & PCC - Air conveying system in option The machine is in very good condition which makes it a good opportunity. If you are interested by this machine, contact us for further information and to discuss the availability.

SIDEL SBO 16 / 20 Universal Eco2 Predis Ul.Cl. PET blowing machine for 16 hot or cold moulds. The manufacturing year is 2011 and the capacity is of 25.600 BPH (1.600 bpm/h). The moulds are hot up to 75°C (or standard) and the machine is equipped with quick change for moulds. The oven type is Sidel Universal Eco2 C3 special filters. The number of heating modules are 20. Personalization for preform neck 38mm 3 starts. Machine equipped with: - Sidel preforms tipper, hopper & feeder - Sidel AGR preforms disinfection - Sidel Predis Ultra Clean - Vulcanic water/oil thermoregulator - Sidel PCC drive & electrical cabinet Regular maintenance and service by SIDEL. The machine is still installed and has to be dismantled. If you are interested, you can contact us for further information and to discuss about the availability.

SIDEL SBO 12 serie 2 blow-moulding machine for 12 moulds. Personalization for preform neck PCO 28. The manufacturing year is 2002 and the capacity is 15.000 BPH. Machine equipped with : - Preforms tipper & hopper - Electrical cabinet - Sidel control panel The machine is no more in production and is already professionally dismantled. The machine is in good condition. If you are interested by this machine, you can contact us by mail for further information and discuss about the availability.

Automatic PET Bottle Blow Molding Machine Manufacturer: SIDEL Type: SBO 4 Year of prod. 1992 Capacity: 4000 pcs/h Number of moulds in the machine: 4 Preform feeder: yes Two types of molds included: 1.5 L and 2.0 L Chiller: RIEDEL Technical condition: used

Blow volume 0.25-3.0 ltr. PET, 6 stations, up to 7,200 bottles/hour, inckl preform silo, steep conveyor and installer. Moulds, compressor and water cooler available at an additional cost. Good condition!

1 used stretch blower, Manufacturer SIDEL, type SBO 14 SERIES 2, built 2001, Siemens S7-400, power at 0.5L 21500 Fl/h, basically with shapes 0.5 L square/round Champagne bottom, quickly adjustable by GUPM, max bottle size 2.5 L, furnace linear, heating modules 14, forming mouth 30/25. Maintenance by Sidel and own technicians. Condition: Oven chain not complete, but curve card removes new as spare part. With: Sidel Pre-form Hopper/Kipper, various to air transport manufacturer Ling Systems, some spare parts. No cooling unit, no high-pressure compressor. Last production March 2019. Immediately available.

1 used Strec blower, manufacturer SIDEL, type SBO 14 SERIES 2, built 2004, Siemens S7-400, capacity at 2.0L 16000 Fl/h - at 0.5L 21500 Fl/h,, in principle with shapes 0.5 L + 2.0 L round petaloid, quickly adjustable by GUPM, max bottle size 2.5 L, furnace linear, heating modules 14, Formling mouth 28 / 1810, operating hours 72958, production hours 34191. Maintenance by sidel and own technicians. Condition: neat/good. With: Sidel Pre-form Hopper/Kipper, various to air transport manufacturer Rafael/Compere, some spare parts. No cooling unit, no high-pressure compressor. Last production June 2019. Immediately available.

1 of used blowmolder, make SIDEL, type SBO 14 SERIES 2, new 2001, Siemens S7-400, capacity 0.5L 21500 bph, moulds potentially included 0.5 L squarround champagne base, quick-change for GUPM shell moulds, maximum bottle size 2.5 L, oven type linear, number of heating modules 14, preform neck 30/25. Service by Sidel and own technicians. Condition reasonable - oven chain incomplete, cam-card removed but new available with spares. With: Sidel pre-form hopper, pre-form tipper, various Ling Systems pneumatic conveyors, some OEM spare parts. No water chiller, no hi-pressure compressor. Last production date March 2019. Available now.

1 of used blowmolder, make SIDEL, type SBO 14 SERIES 2, new 2004, Siemens S7-400, capacity 2.0L 16000 bph - 0.5L 21500 bph, moulds potentially included 0.5 L + 2.0 L, round Petaloid base, quick-change for GUPM shell moulds, maximum bottle size 2.5 L, oven type linear, number of heating modules 14, preform neck 28 / 1810, operating hours 72958, production hours 34191. Service by Sidel and own technicians. Condition reasonable/good. With: Sidel pre-form hopper, pre-form tipper, various pneumatic conveyors Rafael/Compere, some OEM spare parts. No water chiller, no hi-pressure compressor. Last production date June 2019. Available now.

3 series of molds 0.5--1.0--1.5 lt SIDEL SBO 8 Series 2

Blowing machine Sidel Model SBO 18 Built in 2001 Power: 26,500 B/H Engine hours approx 44,000

mould set 0.5 lt for blow moulding machine SIDEL SBO 16 series 2

Used pet blowing line: - Blowing SIDEL SBO 4/6, New 1997, capacity 4800 bottles/h,the dimensions of 5100 mm x 7700 mm x 3300 mm - Blow molding cooler Sogequip NRP 25, New 1997. - SIDEL preform feeder, New 1997 - Tippler preform BT-2 03, New 2002

Used blow molding Sidel SBO 12 Series 2 The Sidel SBO 12 Series 2 represents a culmination of this evolution boasting advanced features and capabilities Over time blow molding machines have become indispensable in modern manufacturing Reliable Performance and Durability of the Used blow molding Sidel SBO 12 Series 2 Moreover the blow molding machine stands out for its exceptional performance and durability With a modest operational lifespan of 45 000 hours it has proven to be a reliable workhorse in the production line Its robust construction and precise engineering ensure consistent quality and productivity making it a valuable asset for manufacturing operations Comprehensive Maintenance Support In addition maintenance and servicing are crucial aspects of ensuring the longevity and performance of blow molding machines Sidel a leading manufacturer in the industry offers comprehensive sup ...

Overview The blow moulder was built in 2011 by French manufacturer SIDEL. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. Techn. Details        Working hours: 37.289 h Capacity Max. 32.000 bph Recently produced at 25.600 bph at 2.0L Number of moulds: 16 hot or cold molds Molds: Hot molds up to 75°C, or standard Equipped with quick change Oven type: Sidel Universal Eco2 C3 special filters Number of heating modules: 20 modules Neck personalization: 38 mm Machine was regularily maintained                           Machine equipped with:                     Sidel preforms tipper Sidel preforms hopper & feeder AGR preforms disinfection Sidel Predis Ultra Clean Vulcanic water/oil thermoregulator Sidel electrical cabinet Sidel control panel Sidel PCC

Overview This complete can filling line for CSD & Beer was manufactured 2012 by French company Sidel. The line is still set up but no longer in use. Techn. Details Capacity: 27,000 cans per hour Beverages: Carbonated soft drinks, Beer Can type/Lid: 330 ml with 202 super end double seam Components Sidel Sweep off A/Z empty can depalletizer Magnoni vacuum transfer Magnoni gravity rinser Sidel Starcan MS 50V filler Ferrum F 706G seamer Sidel Starblend D3 EX 0433 EX460 mixer Sidel ML 2.4.ST1 CIP tank (4000L) Sidel CWD35/144 pasteurizer Magnoni can dryer (after seamer) Magnoni can dryer (after coder) Sidel TSP3 SDI BW tray & shrink packer Manual palletising Rotoplat semi-automatic pallet wrapper Conveyors