We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Sheet metal straightening machine make SCHLEICHER type RMC 6-40-96 / 300Machine -No: 5185/1411, built in 1994Bandwidth: 50 - 300 mmSheet thickness: 0.4 - 0.5 mmDrive power: 1.7 kWWith- 3 pairs of straightening rollers- 1 pair of feed rollers- Loop control- Contact pressure of the feed rollers adjustable- Remote control for setup modeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Straightening machine make SCHLEICHER type RML 6-53 / 96-300Machine -No: 3378/1135, built in 1985Bandwidth: up to 300 mmSheet thickness: 0.5 - 1.5 mmDrive power: 1.5 kWWith- 4 sets of straightening rollers- 1 feed roller- R + L run- Automatic / manual- Belt speed infinitely adjustableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Straightening machine make SCHLEICHER type RML 6-40-96-300Machine -No: 3668/1178, built in 1986Bandwidth: 50 - 300 mmSheet thickness: 0.4 - 1.5 mmDrive power: 1.5 kWused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Rolling, feeding and straightening machine make SCHLEICHER type RMS 8 - 53/160 - 1050Year of construction 1985Bandwidth: 250 - 90 mmStrip thickness: 0.5 - 0.8 mmDrive power: 7.7 kWNumber of Straightening Rollers: 8Diameter of straightening rollers: 53 mmWith- loop controlused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Bending machine, straightening machine, plate straightening machine, strip straightening machine, strip straightening device, plate straightening plant -Manufacturer: Schleicher, straightening machine type RML 6-53/96-300 -Number of straightening rollers: 6 total -Belt width: 30-300mm -Tape Thickness: 0.4-2.5mm -Motor: 1.5kw -Dimensions: 1250/900/H1600 mm -Weight: 588 kg
used
material width:850 mm material thickness:0,3 - 1,5 mm no. of straightening rolls:8 straightening roll diameter:40 mm number of draw-in rolls:2 diameter of draw-in rolls:160 mm material thickness with 600 mm material width:1,9 mm material thickness with 400 mm material width:2,3 mm speed:5 - 25 m/min min. material width:200 mm weight:2,8 t Dimensions (WxDxH):1,6 x 2,2 x 2,3 m
used
material width:850 mm material thickness:0,3 - 1,5 mm no. of straightening rolls:8 straightening roll diameter:40 mm number of draw-in rolls:2 diameter of draw-in rolls:160 mm material thickness with 600 mm material width:1,9 mm material thickness with 400 mm material width:2,3 mm speed:5 - 25 m/min min. material width:200 mm weight:3,1 t Dimensions (WxDxH):2,2 x 1,5 x 2,8 m
used
material width:200 mm material thickness:0,8 - 3,0 mm no. of straightening rolls:6 straightening roll diameter:53 mm number of draw-in rolls:2 diameter of draw-in rolls:96 mm material cross-cut:400 mm² speed:3 - 15 m/min power capacity:0,75 kW weight:0,5 t Dimensions (WxDxH):1,0 x 1,0 x 1,4 m
used
material width:450 mm material thickness:0,5 - 1,0 mm no. of straightening rolls:6 straightening roll diameter:53 mm number of draw-in rolls:2 diameter of draw-in rolls:96 mm power requirement:1,0 kW weight:0,65 t dimensions (WxDxH):1,0 x 1,0 x 1,55 m
used
material width:800 mm coil weight:12,0 t coil internal diameter:470 - 520 mm coil external diameter:1500 mm material thickness:0,4 - 2,5 mm no. of straightening rolls:8 straightening roll diameter:53 mm number of draw-in rolls:2 inlet roll diameter:160 mm speed:35 m/min material thickness at 150 mm material width:2,5 mm material thickness at 650 mm material width:1,5 mm material thickness at 800 mm material width:1,0 mm straightening machine:RM 8-53/160-800 decoiler:HE 200-1000
used
material width:450 mm material thickness:1,0 - 14,0 mm coil weight:10,0 t coil internal diameter:470 - 520 mm coil external diameter:1100 - 2000 mm no. of straightening rolls:12 straightening roll diameter:2x70 / 2x96 / 8x127 mm number of draw-in rolls:2 inlet roll diameter:160 mm min. material width:100 mm speed:15 m/min power requirement:75,0 kW weight of decoiler:6,4 t weight of straightening machine:12,8 t dimensions decoiler (WxDxH):3,1 x 1,4 x 3,7 mm dimensions straightener (WxDxH):2,5 x 3,4 x 2,7 mm straightening machine:RMS-Vario-12-70/96/127-0450 infinitely variable drive:insert drive upper straightening part:hydraulic liftable loop bridge:hydraulic driven threading wedge:hydraulic decoiler:HES 12-650 infinitely variable drive:insert drive lag brake:pneumatic snubber roll:hydraulic; motoric driven expansion:hydraulic coil lifting device:hydraulic cropping shears:HS-150-0450
material width: 1200 mm coil weight: 10 t material thickness: 8 mm internal diameter: 500 mm coil outside dia.: 1300 mm coil: Schleicher straightening device: Schleicher feed motor: Schleicher total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Handheld control unit Schleicher type HGB 2P-0301 for Battenfeld
used
Time timer time relay for Diosna Kemper Boku and other kneading machines Timer timer relays for Diosna, Kemper, Boku and other kneading machines that are watches including B7 socket for easy installation. Schleicher DZE12-SL suitable for Diosna Spiral Kneader lifting kneaders and other kneading machines suitable for Kemper Spiral Kneter lifting kneaders and other kneading machines suitable for Boku spiral kneaders and kneading machines suitable also for other kneading machines t: 12min AC 230V 50/60 Hz
a used overhauled press feed line Schleicher, with straightener, roll feeder and decoiler, overhauled in 2020, with new controls
used
Dowel drill Schleicher Type Partner 27/2 Specifications: • Year of construction: 1991 • Working width (mm): 900 • Number of drilling spindles: 27 • Pitch (mm): 32 • Drilling unit: swivelling • Motor power (kW): 1.9 • Space requirement L x W x H (mm): 1120 x 900 x 1150 • Weight (kg): 550
used
Name: Sprout punch Manufacturer: Schleicher, 8192 Gerelsried/Obb. Machine number: 8922 Year of construction: 1985 Condition: used, completely revised and tested - pneumatically operated rung punch - working height (cutting height): approx. 150 mm - working width (cutting width): approx. 120 mm - Width (incl. table extensions): 1520 mm - Depth: 600 mm - Height: 1120 mm - Two-hand operation - with angle stop - with length display (ruler) - with adjustable supports for processing palatine strips - Compressed air connection: 5 bar - dust-free working - Table extension left + right (removable) - Stops left + right removable - adjustable for single miter 90° and double miter 45° - 1 x sliding stop Transport dimensions (W x D x H): 1520 x 700 x 1370 mm on pallet Weight: 95 kg (incl. pallet) (Changes and errors regarding technical data and prices excepted!) In ...
used
Gebr. SCHLEICHER mitre punch mechanical foot actuation Table support left + right Weight: approx. 50 kg from location
used
Manufacturer: Schleicher RACK Access UKE, Type: UKE, Model: Input Rack,
used
Manufacturer: Schleicher Promodul UNG 230 mit<CRLF>11 Stück Access Modulen 1 Rack Access und XCX 700, Sale without warranty: 11 Stück Access Modulen , No right of return: 1 Rack Access , Installation height: XCX 700,
used
Timing relay, relay, heating current monitoring, contactor, semiconductor contactor, contactor -Manufacturer: Schleicher -Type: KZT11 -Number: 2x relays available -Price: per piece -Weight: 0.1 kg
used
Manufacturer: Schleicher, Type: Gehrungsstanze, Control: Fusshebel, Cutting hight max mm: 160, Cutting width max mm: 110, Single mitre joints °: 90, Double mitre joint up to °: 45, machine ready for demonstration: Preis 250 Euro zzgl.Mwst,
used
Table shear cutting knife, replacement knife for table shears, replacement cutting, cutting knife, scissor knife, tape cutting device -Manufacturer: Schleicher, cutting device from conveyor system WV-SYS 160-1050 -Cutting width: max. 900 mm -Dimensions: 1400/165 / H785 mm -Total weight: 300 kg
used
Guillotine shears cutting blade, replacement blade for guillotine shears, replacement blades, cutting blade, scissor blade, tape system cutting device -Manufacturer: Schleicher, cutting device from belt system WV-SYS 160-1050 -Cutting width: max. 500 mm -Number: 1x device available, without partial wiring -Dimension: 900/210/H590 mm -Total weight: 175 kg
used
Permanent magnet motor, permanent magnet motor, electric motor, permanent magnet motor, permanent magnet motor, servo motor, permanent magnet main drive motor -Manufacturer: Indramat, motor from machining center Schleicher WV-SYS 160-1050 -Type: MAC112B-1-PD-2-C / 130-A-1 / S005 -Speed: 1500 rpm -Brake: 14 Nm DC 24 V -Shaft: Ø 32 x 60 mm -Number: 2x motors available -Price per piece -Dimensions: 550/210 / H250 mm -Weight: 38 kg