planing machines used for sale

Width 510 mm 4 knives Neat, works You can call or write to us. We can speak and write German and Russian. You can also send messages in English.

Working width: 318 / 295 mmWorking height: 170 mmMotor output: 2,25 kWLength of the planing table: 1300 mmNumber of knives: 3 St.Feed speed: 5,3 m/min.Dust suction hood: 100 mmconnected load frequency: 400 Vmachine weight ab.: 160 kgDimensions (L/W/H): 1150 x 530 x 930 mmThe planer and thicknesser is delivered almost fully assembled.For thickness planing, the same connection is used for suction as for surface planingused. However, this is placed upwards over the storage table. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Multi-sided wide planing machine with chamfer unit LEDINEK SUPERLES 300 4V + 4F Planing width (min/max): 70 - 300 mm Planing height (min -max): 19 -300 mm Workpiece length (min): 2,000 mm Feed speeds: up to 230m/min Weight: 13.500 kg

x-travel: 11000 mmy-travel: 2.500 mmworkpiece height: mmtable width: mmtable length: mmweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Four-sided planing machine Harbs 250 x 150 mm 7 spindles 350 hours of uptime 3 m1 dressing table 8 newly rubberized feed rollers Grooved bed The machine is practically as good as new, ready for operation Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 fax 0041 62 966 21 12

x-travel: 8000 mmy-travel: 2.500 mmworkpiece height: 2.360 mmtable width: 2.240 mmtable length: 10.100 mmweight of the machine ca.: tdimensions of the machine ca.: 20,0 x 8,5 x 5,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7406 Type: RISZ 16 Producer: ARTHUR KLINK Created: 1993 Parameters: Theoretical diameter of the tool: 95 mm Max. workpiece height: 300 mm Clamping surface: 400x400 mm Maximum working stroke: 1250 mm Maximum stretching force: 16 t Weight: 6900 kg

Working width: 410 mmLength of the planing table: 2.200 mmNumber of knives: 5 St.Motor output: 5 kWweight of the machine ca.: ca. 411 kg: Tersa : Ja Dust suction hood: 120 mmturning speeds: 5.000 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 6696 Type: Profiset 60 Producer: SCM Created: 2018 Parameters: Number of spindles: 5 Vacuum belt width: 25-230 mm Working height: 6-120 mm Max. speed: 6000 1/min Equipment: Swivel head

Working width: 410 mmNumber of knives: 2 St.Motor output: 4 kW: Streifenhobelmesser turning speeds: 4.600 U/min: Nein The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 800 mm

Thickness planer Schwabedissen Type GDHE 8 Working width 800 mm 4 Knife Shaft Includes set replacement fair All 8 knives freshly sharpened With planer knife adjustment gauge Planing height 250 mm maximum 2 height-adjustable sliding rollers in the table Speed of the knife shaft 5400 rpm. 2 feed speeds Motor power 10 kW Suction nozzle diameter 180 mm Dimensions 1900 mm x 1300 mm x H 1600 mm Weight with pallet 1720 kg

Working width: 530 mmLength of the planing table: 2.900 mmNumber of knives: 4 St.Motor output: 4 kWweight of the machine ca.: 850 kg: Tersa : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 63 mm, 22 mm

A combined Kölle HK 63 planer is sold. Gearbox was completely disassembled, cleaned, greased and adjusted. Both shaft bearings completely replaced. Thickness table adjusted to approx. 0.01 mm. Dressing tables were set parallel to each other. The feed and pull-out rollers as well as the pressure beam have been perfectly adjusted, so that there is no planing impact. Newly painted Ready for immediate use Dimensions approx. 210x120cm Planing width 63cm Planing height 22cm 4 Knife Shaft Strip Plane Knife 2 sliding rollers in the table 2 feed speeds Toothed Steel Feed Roller Steel Pull-Out Roller Loading facility available Price is gross (total price) VAT not deductible (margin scheme) The machine can and should be viewed and tried out on site, as a return and warranty are excluded. You can find our terms and conditions on our websit ...

Working width: 410 mmLength of the planing table: 2.600 mmNumber of knives: 4 St.Motor output: 4 kWDimensions (L/W/H): 2.600 x 1.400 x 1.200 mmweight of the machine ca.: 561 kg: Tersa : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SCM Flush-Thickness Planer Model L' Invincibile 2150: - 400mm planer, table length 2150mm - thicknessing planer, manual table lifting Machine not according to CE standards, for export

Working width: 520 mmWorking height: 240 mmMotor output: 7 kWNumber of knives: 4 St.Feed speed: 5/8/12/16 m/min.weight of the machine ca.: ca. 500 kg: Tersa : Ja Dust suction hood: 120 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 630 mm, 240 mm, 7 kW

SPECIFICATIONS: Max. machining width mm: 630 Max. working height mm: 240 Installed power: 7.5 KW Feed speed: 6-18 m/min Roller with 4 blades Voltage: 380 volts Manual operation

Working width: 510 mmLength of the planing table: 2.250 mmNumber of knives: 4 St.Motor output: 5,5 kWDimensions (L/W/H): 2.427 x 1.340 x 890 mm: Ja weight: 750 kgDust suction hood: 140 mm: Keilleistenmesser The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 530 mm, 3000 mm, 4 St.

SPECIFICATIONS: Working dimensions mm: 3000 x 530 Speed 5000 rpm Number of knives: 04 Installed capacity: KW 5.5

Working width: 520 mmWorking height: 300 / 3,5 mmMotor output: 7 kWNumber of knives: 4 St.Feed speed: 5/8/12/18 m/min.weight of the machine ca.: 680 kgDust suction hood: 150 mm: Tersa turning speeds: 4.500 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 4 , 220 , 120

Guiliet Profilier and Hobelautmat with Wepla heads Model: 220 KXR 220 Year built:1990 Condition: very good (used) MAX CROSS-SECTION 220 X 120 MM MIN CROSS-SECTION 30 X 6 MM ENTRANCE TABLE 2000 MM long. PLANING SHAFTS 40 MM Dressing shaft 5.5 kW right and left planing shaft combined 5,5kW Thickness planer shaft 5.5 kW WEIGHT APPROX. 1600 KG Cleaned, maintained and functionally tested. If necessary, we can gladly offer planing heads with continuous cutting edges.

x-travel: NA mmy-travel: NA mmworkpiece height: mmstroke length max.: 450 mmtable length: 450 mmtable width: 350 mmtotal power requirement: 1,7 kWweight of the machine ca.: tdimensions of the machine ca.: mShaper, horizontal,mechanic,vice hydraulic The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: Planing width: 245 mm Planing depth: 0 - 4 mm Nominal stroke rate: idle 8500 1/min Cutting speed: 32.9 m/s Rated power consumption: 2300 W Weight: 13.2 kg Knife head diameter: 74 mm Universal motor: 230 V / 50 Hz

Number of spindles: 6 St.Working width: 240 mmWorking height: 120 mmDimensions (L/W/H): 4900 x 1700 x 1700 mmweight of the machine ca.: 3500 kgControl: CNC SCM SUPERSET NTE 31 PLUS automatic profile milling machine with 6 shafts14 axis control with touch screen - WINDOW VERSIONMachine with 6 spindlesSpindle speed 8,300 rpmWorking width 240 mm, working height 120 mmElectronic horizontal and vertical positioning of the spindlesGlazing bead cuttingTouchscreen controlsDetailed technical description, seeadjacent PDF documents.Suction nozzle diameter:1. Spindle down: 120mm2nd spindle right: 120 mm3. Left spindle: 120 mm4. Spindle top: 150mm5. Spindle top: 150mm6. Spindle below: 120mmOption: workpiece return to the operatorImages are from our archive of a machine of the same model.(Technical information according to the manufacturer - without guarantee!)The data for this ad was created with Mod ...

Key data: 410 mm, 200 mm, 4 kW

Used, Year of Construction 2008 Operating time according to hour meter 135 h (0.02 h/day) Offer Felder AD 741 with special accessories from part-time joinery in best condition for sale. This version is one of the last series with the particularly robust 4-spindle height adjustment, which was later converted to a central spindle for cost reasons. In order to prevent possible misunderstandings, an on-site visit is possible by appointment. Delivery is to be ordered by the buyer. Motor power 4 kW direct start with brake and limit switch Planer width 410 mm Total dressing table length 2000 mm Table length feeding dressing table 980 mm Chip removal max. 4 mm - is set and displayed on the right dressing table Swivel dressing fence with anodized ruler 4-Blade Felder System Planer Shaft Thickness planer width 404 mm with automatic E-thickness height adjustment Powerdrive (min. - ma ...

Number of spindles: 7 St.Working width: min. 18 - 230 max. mmWorking height: min. 8 - 150 max. mmLength of the planing table: 2000 mmFeed motor: 7,5 kWFeed speed: 7-36 m/min.Kuper planer and moulder SWT 23 XLS-7------------------------------------------------------Machine still in use and can be viewedFurnishing:7 spindles each with 7.5 kW motor 40mm diameterWorking width: max. 230 mm, min. 18 mmWorking height: max. 150 mm, min. 8 mmFeed table: 2,000 mmSpindle arrangement:1. Spindle down, 6,200 rpm2. Spindle right, 6,200 rpm, axial NC controlled3. Spindle on the left, 8,000 rpm, axially and radially NC controlled4. Spindle right, 8,000 rpm5. Top spindle, 6,200 rpm, axially and radially NC controlled6. Top spindle, 8,000 rpm, axially and radially NC controlled7. Spindle down, 8,000 rpmSiemens PLC control large touch displayFeed motor 7.5 KW speed 7-36 m/minHeight adjustment electrically v ...

SCM fs 52es SPIRAL Dressing thickness planer Planing width 520mm Spiral knife shaft Dressing table length 2250mm Planer fence 1500mm 90°-45° Machine Grey Cast Iron Tables 7 KW (9.5 HP) 400V 50 HZ Thickness table 850x520mm Passage of 3 / 240mm 4 feed speeds 5 / 8 / 12 / 18 m/min Dual folding system of the tables to the rear max. chip removal 5mm Speed 5000 min/1 1 extraction connection 120 mm Weight approx. 700 kg G&STÜ-5503502

Working width: 630 mmWorking height: 3-310 mmMotor output: 7,5 kWNumber of knives: 4-TERSA St.Feed speed: 6-20 m/min.Vertikal stroke: elektrisch FIMAL thickness planer type SP 63 A-----------------------------------------------------NEW MACHINE Partnership EditionTechnical specifications:-----------------------------------------------------Wo rking width: 630 mm4-knife cutterblock system TERSA, d=120mm: 4,800 rpmmax. chip removal planer according to CE: 8 mmmin./max. Thickness passage: 3/310 mmMinimum workpiece length: 250 mmFeed speed: infinitely variable 6 - 20 m/min.Motor 380 Volt / 50 Hz.: 7.5 kW withmanual star-delta switchSound level according to EN 27960: 86 - 90 dB(A)basic equipment:Thicknessing table adjustment via 4 trapezoidal thread spindlesElectromotive thicknessing table lift with electronicpositioning deviceElectronics according to CE standard Magnetic brakecircuit breaker ...

Key data: 4 , 220 mm, 150 mm

Four-sided planer, model P 22 N, 2 sets of planer heads, reversible knife – strip planer knife, sound protection hood built in 85, Weight approx. 1500 kg Spindles: 4 Working width: 220 mm Working height 120 mm

Number of spindles: 6 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 5-30 m/min.Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled------------------------------------------------------------ -----------Short summary:-------------------------------------------------------------- ---------6 spindles with 8,000 rpm5 x HSK/PowerlockAxial and radial CNC adjustment of the spindles via controlCNC - controlled adjustment and positioning of the feedDetailed description:---------------------------------------------------------- -------------Technical specifications:Working width: 20-230 mmWorking height: 8-120 mmNumber of spindles: 61. Tool holder - below------------------------------------------------Motor with brake: 5.5 kWSpindle diameter: 40mmSpeed: 6,000 rpmTool flight circle: 93 - 160 mmAxial adjustment range: 5  ...