OTT ju used machines

Heated Bonding Press Manuf.: Paul OTT Model JU3013 415v 51kW (Tech data attached)

Panel dimensions 1500 x850 mm Filament heating The press is still in operation and is ready for immediate use

This OTT ST 1611/60 veneer press was manufactured in 1996. It features a maximum pressing force of 70 tons, pressing plates measuring 1300x1611 mm, and a power output of 10.1 kW. The plates are electrically heated, enhancing its efficiency. Consider the opportunity to buy this OTT ST 1611/60 veneer press. Contact us for more information.

This OTT 300-K-D0 was manufactured in 1996. A robust veneer press featuring plate dimensions of 2550 x 1350 mm and hot water heating. It includes 6 pressure cylinders with a total pressing force of 135 tons. Consider the opportunity to buy this OTT 300-K-D0 veneer press. Contact us for more information about this machine.

Edgebander manufactured in 2005. This OTT Twister features a hot-cold melt adhesive application process and can handle edge thicknesses from 0.3 to 10 mm. It supports workpiece thicknesses of 8 to 60 mm and has a feed speed of 14-20 m/min. If you are looking to get high-quality edge banding capabilities, consider the OTT Twister edgebander we have for sale. Contact us for further details.

Manufacturer: OTT, Type: M259, Year: 1994, Program: Ott, Min-max edge material mm: 0,5-3, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 150-3000, Min.-max. workpiece height in mm: 10-60, Edgeband height max mm: 50, Min-max feed m/min: 8-24, Coil magazine: yes, Strip magazin: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes steuerbar, radius milling: yes steuerbar, 4 motors: yes, Grooves, slewable-controlled: yes, Radius scraper: yes, 4 motors: yes, Bonding part EVA: yes, Buffing unit: yes, Top pressure belt/roller: Rolle, Compressed air bar: 6, Noise enclosure: yes, Year :1994

EDGE GLUING MACHINE Manufacturer: OTT Austria Type: Euromatic Year built: 1998 CE standard Function : glue-cap-pre-fraesen-fine-fraesen-round-under-round-copy-zieklinen-pol ishing

Edge banding machine OTT Type: ATLANTIC V 6 B.J.: 1998 Glue unit / also polyurethane adhesive can be Cut from the edge Green cut front and rear Simple milling Profile milling Profile cyclin Simple cyclin Speed 12 m / min Overall dimensions: 0.400 cm, 95 cm wide, 130 cm high; Weight: 1,400 kg

Edge Bander Manafacture: OTT Model No.: K155 Year of construction: 1992 Equipment: Roll magazine Glue unit with hot-melt adhesive - glue basin Pressure zone Cross-cut units Flush milling units Fine milling units with chamfer or radius milling Scraper Wobble

Wide belt grinding machine OTT RS-O Grinding width: 1300mm Calibration roller + fine sanding + cleaning brush

Manufacturer: Ott, Type: F 2530, Year: 2008, Min-max edge material mm: 0,2-25, Work piece width min-max mm: min. 65, Min.-max. workpiece length in mm: min. 150, Min.-max. workpiece height in mm: 8-60, Min-max feed m/min: 10-16, Premilling: yes, Mitre stations: yes, 2 motors: yes, Type of scraper: Profil und flatch, Flat scraper: yes, Year :2008

Manufacturer: Ott, Type: Euromatic FÜ, Year: 2001, Program: yes, Control: SPS, Work piece width min-max mm: 60 , Min.-max. workpiece length in mm: 60, Min.-max. workpiece height in mm: 10 - 60, Kantenmaterial min-max mm: 0,2 - 15, Vorschub min- max m/min: 12 - 20, Mitre stations: yes, Fasefräsen: yes, Flat scraper: yes, Rolle/Riemen: Rollen, Machine lenght mm: 8500, Wight approx. kg: 4200, Year :2001

OTT shelf press shelf length 330cm width 160cm 3 dunks clearance between shelves 13cm, max clearance with one load 46cm Solid steel shelves Water heating piston diameter 90mm, 10 pistons Safety switch - breakaway 5.5KW Pump Motor total pressure 210 tons machine very solid weight +- 14.000kg machine in stock, can be checked, very good condition loading included in the price

Widebelt Sander line with 3 machines Working width: 1300 Composed of: Boere Elite - 1 x calibration unit with contact roller - sandinmg unit from below Ernst LKB - Cross Sanding Unit - Longitudinal Sanding Unit OTT RSO - Calibration Roller - Sanding pad

OTT Pacific V12 - Joining PLC Comp. Control LCD display Pre-milling unit immersion-controlled Full car. Roller magazine / cross-cut shears High-speed gluing station car. Printed work Flush caps pneum. 0-10° Flush milling/chamfer milling 15/30/45° - 8 mm Radius milling R-2, R-5 Corner rounds Radius scraper blade Wing scraper blade - to be converted to buffing unit Soundproof booth with room extraction Machine is WORKSHOP OVERHAULED in VERY GOOD - CONDITION From stock Lieboch

An OTT heating plate press is available. Pressing area X/Y: 2250mm/1200mm, heating plates: 2, connected load: 14kW, pressing force: approx. 65t, max. pressing height: 300mm, machine dimensions X/Y/Z: approx. 2600mm/1350mm/1800mm, weight: approx. 3300kg. An on-site inspection is possible.

OTT Comet-2 1100 • Wide belt sanding machine • Grinding width 1100 • Machine is unchecked • Service recommended • No Guarantee / No Warranty • From stock Lieboch NET € 1.500,00

Mould grinding machine OTT - KG Up to 150 mm wide with Stepless Transport Carpet Profile strip and semi-round mouldings

I am selling a wide belt sander OTT MEGA TR11, built in 1996. Configuration: Hard-rubber calibration cylinder Combination unit rubber cylinder + pneumatic shoe with segment control. Working width 1100mm. Electronic height adjustment with digital display. 3-160mm 1 motor 11kW 2 feed rates. Sensitive adjustment of the shoe position. Pneumatic adjustment of the shoe and cylinder pressure. Condition LIKE NEW ! The machine worked very little. Available the same.

OTT Tornado R + PU PLC Comp. Control 7" TFT-Touch color display CM-CombiMelt for EVA and PUR hot melt adhesives Pre-milling unit - joining Full car. Role magazine Full car. Edge magazine Flush caps pneum. 0-3° Flush Milling - 12mm Radius milling R-2, R-5 Bevel milling 0°/15°/30°/45° Corner rounds Radius scraper blade Wing Scraper Soundproof booth with room extraction Cleaning set with 4-fold spraying device, fine buffing device and lubricant spraying device First delivery 2006 Machine is WORKSHOP TESTED in TOP CONDITION from stock Lieboch

OTT MEGAtronic 111 Wide-belt calibration fine grinding machine 1. Grinding Unit Calibration Roll Unit 2. Grinding unit electronically controlled link sanding shoe unit Working width 1100 mm Feed speed 5 + 10 m/min Motor power grinding unit approx. 11 kW Machine is WORKSHOP TESTED  from stock Lieboch

Profile scraper unit, profile scraper, flat scraper unit, finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine -Manufacturer: OTT, profile scraper from edge banding machine type U206 -Quantity: 1 piece available -Dimensions: 460/430/H560 mm -Weight: 57 kg

Finishing unit, buffing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, plastering unit -Manufacturer: Paul OTT, Finishing unit from edgebanding machine U 206 -Type: KEO-04 -Motor: 0.3 kW -Speed: 1450 rpm - laterally adjustable -Height: adjustable -Number: 2 units available Price: per piece -Dimensions: 400/280/H660 mm / 480/290/H660 mm -Weight: 35 kg/ 36 kg

Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor -Manufacturer: Paul OTT, milling unit from edge banding machine U 206 -Milling motors: Type HF 08.2 -Power: 0.6 kW / 200 Hz -Speed: 1200 rpm -Adjustment ranges: see photos -Number: 2x milling unit available -Price: per piece -Dimensions: 530/490/H600 mm -Weight: 67 kg/piece

Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor, saw unit, milling unit saw unit -Manufacturer: Paul OTT, saw unit from edge banding machine U 206 -Engines: Type K 14 -Power: 0.8 kW / 200 Hz -Speed: 1200 rpm -Saw blade: Ø 140 mm -Saw blade spacing: 515 to 1070 mm -Dimensions: 530/490/H600 mm -Weight: 78 kg