4 ROLL HYDRAULIC DUAL PRE-PINCH 3000x15 MM PLATE BENDING MACHINE NEW Brand MG model M3015 -Width of plate 3000 mm -Thickness of plate rolling 15 mm -Thickness of plate pre-bend 12 mm minimum bending diameter ID 350 mm Rolls dimensions: -Surface length mm. 3100 -Top roll mm. 290 -pinch roll mm. 270 -Power electric 10 Hp Technical data: -rolls hardened surface high resistance -variable rolling speed -Powered driven hydraulic rolls rotation -conical bending attachment roller type -calibration system re-rolling welded shells -deflection pinch pressure adjustable upon the thickness -overload protect complete safe operation of the machine. -control console on wheels with electric joysticks commands -position readout digital display for rolling memorize and repeat -safety and emergency systems installed -manuals and schematics along with the machine
Key data: 2000 mm, 6 mm, 10 mm
4 ROLL HYDRAULIC PLATE BENDING MACHINE MODEL M2006P _NC EASY COMMAND 15” -MATR. C072/25 MACHINE NEW PLATE BENDING ROLL PLANETARY DESIGN DOUBLE PINCH PRE-BEND BRAND MG SRL ITALY CNC_PROGRAMMABLE AUTOMATIC PLATE ROLLING Capacity: -Width of plate: 2000 mm -Thickness of plate rolling 6 mm -Thickness of plate pre-bending 4 mm Rolls dimensions: -Surface length mm. 2050 -Top roll mm. 160 - Lower roll mm. 140 Configuration installed: • Surface hardening of the four rolls, smooth finishing suitable for stainless plates rolling • Dual pre-pinch, plate edges pre-bend automatic programmable • Conical bending hydraulic attachment - hardened contrast pad. • Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. • Calibration system f ...
Limpet coil roller machine hydraulic To form half round pipe from flat metal strip and bending into wanted radius with spiral continuous. Manufacture MG srl Year 2002 -Shafts output 80 mm -Interchangeable set of molds to form half pipe 60 mm , 90 mm , 115 mm -Coil holder for the reel metal strip with guide-way bench uncoiling and alignment the steel strip to the rolling machine -Pinching lower central roll adjustable to form the half pipe -Digital position readout to determine the bending diameter of the bending, the pitch of the spiral, the shape of the half tube forming -hydraulic arm movable in 3 directions to set the pitch for continuous coil rolling -Upper vertical support hydraulic operated to hold in position the formed diameter and collect the spiral from diameter 700 to diameter 3000 mm -Operator console electric with push buttons and digital posi ...
4roll plate bending machine 2500 X 12 mm with central support hydraulic for large diameters and side arm plate support Capacity plate width 2500 mm Plate thickness 12 mm Prebend 10 mm Upper roll 265 mm Lower rolls 245 mm Surface useful on rolls 2550 mm Power supply 380/50 Electric motor 15 Kw on hydraulic unit Configuration Hardened rolls very high surface resistance Conical bending attachment Digital position readout of the rollers Safety and emergency installed per norms Hydraulic rolls power driven with planetary gear unit Hydraulic motion of rollers individual with dual initial pre-pinch Open front drop-end hydraulic to unload the closed shells Central support vertical hydraulic operated for large diameters Side arm operated hydraulic support Total weight of the machine 7500 Kg Total weight of the machine 7500 Kg machine layout 4200X15 ...
Key data: 200 mm, 300 , 200
Profile bending roll used equipment hydraulic model AR200 year 2008 make MG Italy Capacity bending chart photo in enclosed -Technical data: Output shafts size 200 mm -Machine complete with set of rollers adjustable for the various shape of profiles. -Traction tool hydraulic operated for the HEB-beam - IPE - UNP bending the hard side. -Lateral correctors left and right side hydraulic operated in 3 direction. -Included additional set of rolls for pipe 6" inches -Machine with 3 rolls driven system with individual hydraulic motor and axial gear-unit on each shaft. -The 3 shafts working on bearings, heavy duty type with sealed lubrication. -Centralized control panel movable on wheels with all electric commands. -Dual rolling speed up to 5 mtr/min with automatic balancing system between the 3 rolls. -Safety devices in compliance with European regulation. CE mark. - ...
Key data: 200 mm, 400 , 360
Profile Bending machine Model AR360 -Year 2004 MG brand made in Italy OUTPUT SHAFTS 360 MM Capacity as per the original bending chart here enclosed Configuration installed with the machine -Pyramid dual pinch side rolls independent hydraulic positioning bending and pre-bending performance -The 3 shafts driven with hydraulic motor and gear unit individual on each roll -Synchronized speed automatic hydraulic control between the 3 rotating shafts -hydraulic traction tool to roll HEB_INP_UPN bending on hard-side. -Lateral correctors left/right hydraulic operated in 3 directions Tooling with the machine -Set of rollers for pipe: 6” and 12” -Set of rollers with adjustable opening width up to 400 mm ( for all the profiles bending easy way and hard way ) -Set of rings to increase the rollers opening width up to 500 mm ( for all the symmetric profiles b ...
Capacity plate width up to 3000 mm thickness 22 mm plate prebend 18 mm dual prepinch technical data: -length of rolls 3100 mm -top roll dia. 350mm -lower roll dia. 330mm -Hydraulic power unit with 20Hp motor -Electric supply Vac 400/50 – 480/60 Configuration complete: -Hardened surface of the 4 rolls -Conical plate bend hydraulic attachment. -hydraulic power driven rolls rotation with gear unit axial each -Synchronized hydraulic power dragging . -front open drop-end to remove closed shells. -Calibration re-rolling feature for welded shells Safety configuration in compliance. Control console electric commands with digital readout Predisposed ready to connect nr. 1 central hydraulic support for large dia. nr. 1 side arm hydraulic to hold in place think plate sheet being formed
Specifications: Working length: 4100 mm Max. bending power: 10.0 mm Bend: 8.0 mm Diameter upper roller: 310 mm Diameter of lower rollers: 285 mm Hardened rollers hydraulic snap roller bearing Conical bending device Control panel with digital display CE mark Dimensions (length x width x height)): approx. 5100 x 1250 x 1400 mm Weight: approx. 6.2 tons Condition: very good, almost mint condition The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.
Specifications: Working width: 1050 mm Max. bending power: 100.0 mm Max. bend: 80.0 mm Diameter upper roller: 530 mm Diameter of side rollers: 530 mm Conical bending device by inclined position of the two side rollers Mobile control panel with digital display Engine power: 37 kW Hydraulic Safety Chucks CE mark Net weight: approx. 16 tons Auxiliary: 2. Roller set : Diameter upper roller: 360 mm Diameter of side rollers: 360 mm
Three-roller calender brand MG 3000 x 200 mm. Year 2006
3-roll hydraulic with dual pre-pinch planetary configuration. new to complete, 45 days from order. -Plate width 3000 mm -Capacity rolling plate thickness 50 mm -Pre-pinch plate thickness 40 mm Machine configuration and accessories installed: -useful surface length on the rolls 3100 mm -upper roll size 480 mm -lower rolls size 440 mm -Digital position readouts. -Hardening treatment of the 3 rolls. -3 rolls driven hydraulic motorized with independent axial gear box on each roll. -Conical plate bending attachment with tiltable lower rolls hydraulic. -CE quality certification, Made in Italy manufacturing. -Service manuals and operation instruction manuals. -Hydraulic diagrams -Electric & electronic schematics with parts list. -Set of service tools for maintenance. -Electric power installed 50Hp. -3 phase voltage to be specified Warranty 12 months. ...
An asymmetrical three-roll plate bending machine MG is available. Working width: 2000mm, roller diameter: 130mm, max. plate thickness: 3mm, power: 6kW, weight: approx. 2000kg. An on-site inspection is possible.
sheet width: 3100 mm plate thickness: 6.0 mm ST pre-bending: 4.0 mm ST diameter of upper rolls: 200 mm side roll diameter: 165 mm diameter of lower rolls: 190 mm bending speed: ca. 5.0 m/min Control: DIGI oil volume: 80.0 Liter voltage: 380 V total power requirement: 6.0 kW weight: 6000 kg range L-W-H: 5250 x 1500 x 1400 mm very good condition () Current new price approx. 80,000 euros Special price on request Features: - Robust electro-hydraulic 4-roll bending machine 4-roll concept offers a wide range of bending and rounding options - MG swivel control panel Operation - control of all rolls and machine axes Digital position display Manual operation via joysticks - Two central rolls are driven directly by hydraulic motors - Conical rolling possible via inclined position of the rolls - Parallelism of the side rollers via torsion shafts - Bending on both sides - Diameters of up to 1 ...
Boven- en onderrol worden aangedreven (planetaire tandwielkast) Conische buiging Automatische gelijktijdige balancering Onderste rol excentrische balk Number of rolls: 4 rolls - 2 roll driven Roll capacity cold: 3100 x 32 mm Roll dia upside: 410 mm Dia under roll - side rolls: 370 - 300 mm Power needed: 25 HP Weight: 19 ton
