used KRAUSS MAFFEI km

used spare part IMM - Column warehouse no.: 501285 manufacturer: KRAUSS MAFFEI Typ: Saeule year of construction: neu Column for intensifier match the machine size Krauss Maffei 501285 There are a total of 6 columns available, they are brand new and unused. Total length 965 mm, diameter 124 mm piston, piston rod diameter 85 mm.

Krauss Maffei KM90/50-190 CD injection molding machine The machine was working in a CD production line

Injection moulding machine Krauss Maffei KM200-1400C1 Clamping force 200 Ton Distance between columns : 550 cm x 550 cm

Injection moulding machine Krauss Maffei KM200-750CX Machine is in good condition Clamping force 200 Ton

Krauss Maffei KMD 130-23 extruder Capacity : 1 Ton per hour Suitable for granule

Krauss Maffei KMD 2-110 PVC Extruder Machine Hourly capacity : 450-600 KG PLC Control

Krauss Maffei bi-material KM1600/12000/8100 MX -Clamping force : 1300 ton -Manufactured year : 2007~2009 -Quantity : 12 units

KRAUSS MAFFEI KM450-4500 CS PET (450 ton) year `2010 for PET preform Location : Korea

KRAUSS MAFFEI KM3200/24500 (3200 ton) injection molding machines for bumper. For more information, contact by email (koma7240daum.net) or whatsapp (+821037187243)

Used hard PVC granulation plant after reconditioning Capacity approx. 200 - 300 kg/h, consisting of: 1.Extruder Krauss Maffei KMD 2-60KK (twin-screw, oblique screws), Year Built 1996 Main engine 37kw Heaters controlled by thermoregulators Heaters of German production Degassing – pump Screw diameter: 60-125 mm Screw speed 37.5 rpm Oil-thermostated augers externally Heating power of snails 6kw Screw cooling power 7kw Oil-cooled cylinder 4 zones on the cylinder (including 3 heating and cooling zones) Gefran/ Gneuse mass pressure sensor – Gefran/Gneuse ground temperature sensor Cylinder cooling power 14kw Capacity up to 300 kg/h 2. rotary filter (sieve changer) Manufacturer: Gneuss Type SF-90 – capacity up to 350 kg/h 3.Cutting in hot air system 4. granulate cooler with conveyor fan

Krauss Maffei KMD120 extruder - efficient - year of manufacture 2002 - Screw diameter: 120 mm parallel - L/D: 23 - capacity: 600 - 700 kg/h - the scope of general renovation in 2011 carried out in our company - new AC 90 kW motor, controlled by a new vector inverter - new control cabinet equipped with new heaters, new housings, new fans, - new thermoregulation cabinet equipped with SSR + new regulators - new plasticizing system, - number of heating zones: cylinder (5), connector (1), head (3) - reducer after reconditioning - drive synchronization system: extruder, dispenser - equipped with a pressure and temperature sensor. -Dimensions; length x width x height = 530*160*170cm + hopper - Extrusion axis 1200mm

1,0 St. gebr. Injection molding machine with turntable, lateral unit from medical technology Manufacturer: KRAUSS MAFFEI Type: KM100/180CX Year of construction: 2007 Clamping force: 100 tons Tie bar spacing: 370 x 370 mm Screw DN 1: 25 mm Displacement: 59 cm³ Moulded part weight: 54 g/hp Screw DN 2: 15 mm Displacement: 14 cm³ Moulded part weight: 13 g/hp Control: MC5 Equipment of the machine: -Interface robot -Additional control pump -2.0 ST. Core pulls

KRAUSS MAFFEI two shot (2k) KM1300-12000/8000 MX machines -Clamping force : 1300 ton

Three injection molding machines Krauss Maffei Model KM200-1000C2 Year of manufacture 2002 Total working hours hours 57344/64716/54374 Total production time h 54540/61077/51379 Origin Germany Closing Unit Closing Force 2000 Kn (200T) Inner width between columns (hxv) 560x560 mm Mold opening way 700 mm Min. Mold height 350 mm Pusher distance 200 mm Pusher forward force 58 Kn Injection Unit SP1000 Screw diameter 55 mm L / D ratio 20 Volume 523 Cm3 Weight (PS) 476 g Pump power 37 kw Heater power 18 kw Weight ca. 10 t Length x Width x Height 5320x1750x2230 mm price for one machine

Key data: 6500 kN, 1650 g/PS, 90 mm

1.0 pcs. Injection molding machine with robot Manufacturer: KRAUSS MAFFEI Type: KM650-2700C2 Year of construction: 2003 Clamping force: 650 tons Tie bar spacing (HxV) 1,000 x 930 mm Screw DN: 90 mm Displacement: 1,813 cm³ Moulded part weight: 1,650 g/hp Control: MC4 Equipment of the machine: - 2 pieces of core pulls movable plate - 2 pieces of core pulls fixed plate -Closing nozzle hydraulic -Robot: Manufacturer WITTMANN, type: W643, year of manufacture: 2003 Travels: Y = 2,400 mm, X = 1,200 mm, Z = 3,000 mm

Krauss Maffei KM650-5700CM Closing unit Clamping force [kN] 6500 Dimensions of mounting plates (hxv) [mm] 1550 X 1440 Clearance between columns (hxv) [mm] 1000 X 930 Min./max. mold height [mm] min 600 Maximum opening width [mm] 1750 Injection unit Screw diameter [mm] 95 Injection volume [cm3] 2956 Injection weight [g] 2111 Injection pressure [bar] 1795 Electrical and hydraulic equipment Rated power of the pump motor [kW] 110 Heater power [kW] 59 Dimensions and weight Net weight with control cabinet [t] 39.5 Dimensions (L x W x H) [m] 9.36 x 2.65 x 2.43

Krauss Maffei KM800-8100 MX Injection Moulding Machine With Robot 3300 gr(PS) Min-Max mould thickness : 500-1100 mm Distance between column : 1120 mm x 1000 mm Screw diameter : 95 mm

110 Ton Distance between columns : 470 mm x 470 mm 250 gram

110 Ton Distance between columns : 470 mm x 470 mm 250 gram

110 Ton Distance between columns : 470 mm x 470 mm 250 gram

Output: 140-180kg/h, screw diameter: 50-103mm, screw length: 1300mm, max. screw rotational speed: 43/min, connected load: 25kW, operational hours counter: 62,590h, including dosing unit with hopper, vacuum pump, cylinder cooling aggregate and screw temperature control.

SPE180: Screw diameter: 25 mm Displacement: 59 cm³ Injection weight in polystyrene: 54 g/PS Injection pressure: 2,500 bar SPE55: Screw diameter: 15 mm Displacement: 15 cm³ Injection weight in polystyrene: 54 g/PS Injection pressure: 2,600 bar

Here we offer a well-maintained injection moulding machine. Manufacturer / Type:BOY Type: XS (100-14) Serial No.:will be communicated in case of interest Year of manufacture:2015 Operating hours:25.000 h Version:Procan Alpha 2 / S1 Clamping unit Clamping force:100kN tie bar distance:160 x 110mm (2 tie bars) Mould installation height min.:100mm Platen distance max:250mm Ejector stroke:50mm Injection unit: Injection unit:cylinder ø14mm Shot weight max.:6,1 g/PS Injection flow:22g/sec Spec. injection pressure:2298 bar Sprue extractor integrated Dimensions & weights: Weight with control cabinet: 485 kg. Length: 1480mm Width (machine only):520mm Height min - max:1380 - 1690mm Oil capacity:28 L The visible mini-laminar flow unit and the stainless steel area cover belong to the machine Other possibly visible peripheral devices do not belong to t ...

For sale a complete extrusion line in good condition, produced in 2004 by A + G Austria. Extruder KMD110 (Krauss Muffai) 1996 The line is designed for the production of a PVC window sill, 500mm wide, as well as a seamless panel with a width of 250mm. The appropriate extrusion tool is available. Line productivity 350kg / hour. The line allows you to process highly filled mixtures at a low cost. The set includes a screw loader. The cylinder augers after replacement have worked for 6 months

Closing unit Clamping force [kN] 1300 Dimensions of mounting plates (hxv) [mm] 745 x 770 Clearance between columns (hxv) [mm] 470 x 470 Min./max. mold height [mm] 300/600 Maximum opening width [mm] 900 Injection unit Screw diameter [mm] 40 Injection volume [cm3] 251 Injection weight [g] 229 Injection pressure [bar] 2500 Electrical and hydraulic equipment Rated power of the pump motor [kW] 22 Heater power [kW] 15.5 Dimensions and weight Net weight with control cabinet [t] 7.7 Dimensions (L x W x H) [m] 5 X 1.6 X 2