used KASTO ss

This KASTO SSB 260 VA Sawing machine was manufactured in the year 1998 in Germany. The machine disposes of an automatic feeding and a conveyor belt for saw blades. It has a saw blade length of 4115mm, a saw band width of 34 mm and a maximum diameter of 260 mm. It is in good conditions.

Overhauled: 2018 Year of construction: 1985-2017 Band saw blade 4115 x 41 x 1,3 mm Engine output 4.0 KW Cutting speed 15-125 m / min Workspace square Max: 260 x 260 mm Flat maximum work area: 260 x 260 mm Work area round Max: 260 mm Workspace bundle Max: 150 - 260 x 200 mm (optional beam voltage) Saw speed 0-40 mm / s adjustable Section length 5-650 mm (~ 9999 mm multiple hub) Nachschubgeschw. 125 mm / s Weight approx. 2200 kg Dimensions Lxwxh 1670mm x2080mm x2130mm (chip scratch optional) The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The machine is completed retrofit, both technically and visually in mint condition. A visit of this saw system is possible at any time. The machine will be overhauled on request in our House. Among other things, following points are renewed: -Modification on PLC control Si ...

cutting diameter: 260 mm saw band length: 4115 mm cutting width: 260 mm cutting range square: 260 x 260 mm height of material-table: 950 mm material feed: 600: 3x reversierbar mm multiple feed until: 1800 mm dimensions of saw-band: 4115 x 32 x 1,1 mm cutting speed: 15-125 m/min power capacity saw: 4 kW control: Minipos 807 min. cut-off length: 6 mm Remaining piece length: 10 / autom. 110 mm total power requirement: 6,5 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2,09 x 1,9 x 2,03 m Condition: ready for operation: Video(s) available on our website.: Electric 380 Volt: Chip conveyor: Cooling equipment: Material feed: NC fully automatic band saw with vertical saw band run (saw unit off polymer concrete), cutting area around 260 mm, control Minipos 807, Clamping pressure regulation of the vices by means of a hand wheel and manometer, stepless cutting speed and cutt ...

chip conveyor: inkl. : inkl. weight of the machine ca.: 2,2 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Cutting diameter around 260 mm Cutting diameter square 260 mm Saw blade length 4115 x 32 x 0.9 mm Belt speed 15 - 125 m/min NC control Total power requirement 6.5 kW Machine weight approx. 2.0 t Dimensions L x W x H 2.1 x 2.1 x 2.0 m including chip conveyor weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 2,100 x 2,100 x 2,000 mm

+++ ATTENTION - PRICE DROP!!! +++ Prices are rising, ours are falling!!! +++ Our prices are reduced by 50% now, +++ due to warehouse restructuring!!! +++ Also, consider taking a look at our other offers in stock. Hydr. hacksaw Kasto EBS 320 U manufacturer: Kasto type: EBS 320 U mach.-Nr.: 273463 year of construction: ??? comm.-Nr.: 3990297/509 stock-Nr.: 1836 +++ Regular Price: 3.650,- € > Reduced Price: 1.825,- € BN +++ All prices are shown without taxes (net price) Technical Data (According to manufacturer) sawing area: Ø 320 mm oder 320 x 300 mm saw blade dimensions: 575 x 45 x 2,5 mm 4 hub speeds: 40 / 57 / 80 / 115 hubs/min. drive power: 3,5 kW weight: ca. 750 kg standing area: B 1,80 x T 0,80 x H 1,10 m machine color: grauweiß / rot Features * 4 hub speeds * cutting pressure infinitely adjustable * closed hydraulic system *  ...

This KASTO sawing machine was manufactured in 2019. It features a robust 2200 kg weight, along with saw blade dimensions of 5,090 x 34 x 1.1 mm for precise cuts. The cutting range for round materials extends up to 330mm, with a maximum feed per stroke of 500mm and a cutting speed of 12 to 150 m/min. Cooling lubricant capacity is around 86l. Buy this KASTO WIN A3.3 sawing machine. Contact us for more information.

BRAND: KASTO YEAR: 2018 MODEL: KASTOmicut U 4.6 PRODUCTION HOURS: 0 APPLICATION TYPE: SAWING LOCATION: IRELAND MACHINE TYPE: SAWING MACHINES AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 1540 MM MEASUREMENTS DEPTH: 3010 MM MEASUREMENTS HEIGHT: 1560 MM MACHINE WEIGHT: 1500 KG CONTROL UNIT BRAND: KASTO MODEL: SMARTCONTROL CNC MAIN LANGUAGE: ENGLISH CNC LANGUAGE CUSTOMIZABLE: YES WORKPIECE WORKPIECE X: 520 MM WORKPIECE Z: 335 MM MEDIA MAIN ELECTRONIC CONNECTION: 400 V POWER CONSUMPTION: 5,5 KW Additional Information MACHINE BENEFITS QUALITATIVE MACHINE BENEFITS: - PERFECT CONDITION - EX SHOWROOM MACHINE - NEVER USED

BRAND: KASTO YEAR: 1995 MODEL: HBA 1060/1260AU APPLICATION TYPE: SAWING LOCATION: GERMANY MACHINE TYPE: SAWING MACHINES AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 5800 MM MEASUREMENTS DEPTH: 6700 MM MEASUREMENTS HEIGHT: 3400 MM MACHINE WEIGHT: 19000 KG CONTROL UNIT BRAND: KASTO MODEL: CNC TABLE OUTER LENGTH: 2500 MM OUTER WIDTH: 1250 MM TABLE LOAD: 20000 KG Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - MATERIAL DIAMETER 1060 MM - STRIP LENGTH 11400 MM - CUTTING WIDTH 1260 MM - CUTTING RANGE AT 90 DEGREES: SQUARE 1060 X 1060 MM, FLAT MATERIAL 1260 X 1060 MM - FEED LENGTH 2100 MM - CUTTING SPEED 16-80 M/MIN - AUTOMATIC PROGRAM - CHIP CONVEYOR - DIMENSIONS OF BAND SAW [M] 11430X80X1. 6MM - DIMENSIONS OF SAW BELT [INCHES]. 37' 6" X 3-1/8" X 0. 063" QUALITATIVE MACHINE BENEFITS: - B ...

cutting diameter: 140 mm saw band length: 3.000 mm - - -: - - - - - - Band Saw | KASTO - MH 1,8 The KASTO - MH 1,8 band saw is in good condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The column saw is designed to cut metals from aluminum and its castings, through non-ferrous metals, to high-quality metals such as stainless steel. The saw has a stable structure and reliable technology for automatic material feeding and cutting, which only takes place at an angle of 90°. The saw is also equipped with a cooling system, which is responsible for cooling, lubrication and protection against corrosion of tools and cut elements. The main materials cut on a frame saw are profiles, shafts, pipes, rods, angles, C-sections, T-sections and other shapes. Producer: KASTO Model HBA-360 AU Year of production 1995 Automatic operation type Tape cutting tool 5334x38x1.3 mm Max. dimensions of the cut material 360 x 360 mm Max. diameter of cut material 360 mm Angle cutting missing Arm feed speed 20 - 130 m/min Hydraulic vice pressing Engine power 7.5 kW Producer: KASTO Max. ...

cutting diameter: 650 x 650 mm saw band length: 8585 mm cutting width: 1,6 mm band speed: 18 - 120 m/min Control: KASTO table load: 8 t total power requirement: 18 kW weight of the machine ca.: 7 t dimensions of the machine ca.: m Automatic band saw Kasto HBA 660 AU Accesories: chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer : Kasto Type : Verto A2 Year of construction : 2015 Control : Basic-Control Kasto Location : from the beginning of March 2024 from warehouse Sweden Easy-to-use Basic Control control Frequency-controlled, infinitely variable saw drive Infinitely variable, hydraulic saw feed Two hydraulic horizontal clamping vices Electromotive material feed via ball screw Specifications Cutting range 90° round. :260 mm Cutting range 90° flat (W x H): 320 x 260 mm Cutting range 90° square: 260 x 260 mm Shortest remnant length: 6 mm Smallest saw diameter: 10 mm Band saw dimensions: 3,180 x 27 x 0.9 mm Cutting speeds: 12-120 m/min Material support height: 950 mm Weight. 1,360 kg Dimensions. 2,365 x 2,250 x 1,767 mm (without roller conveyor) Automatic Band Saw with Reduced Volume Other equipment - Automatic zero positioning of the first saw section - Coolant ...

This KASTO HBA 1060/1260AU band saw machine was built in the year 1995 in Germany. It is equipped with a KASTO CNC control unit. The machine has a max workpiece diameter of 1060 mm and a cutting speed of 16-80 m/min.

Machine type: hydr. Hacksaw Make: KASTO Germany Type: WBS 150 / 170 Machine No. No. 116 004 1203 /54407 Saw blade length: 300 x 32 x 2.0 mm Stroke cut pressure: hydr. selectable via adjustable wheel Cutting range at 90 Round: 150 mm Cutting area max. 150 x170 mm Cutting speed: approx. 12-24 m /min Cutting range at 90 flat: 170 x 150 mm Miter cut: adjustable up to 45 Cutting range at 45 Round: 100 mm Cutting area at 45 Flat: 100 mm Cutting range at 60 round: Cutting area at 60 flat: Vice clamping: 155 mm Working height: 700 mm Power transmission: stable gear ratio Saw motor: Bauknecht 380 Volt 50 Hz 0.55/0.75 KW 1390/2780 rpm Total power requirement: 1, KW Weight: approx. 170 kg Location: Rotthalmünster Germany Delivery time: immediately possible Freight base: from stock free loading truck Addition solid design stable ironing guide (adjusta ...

Outdated: 2014 Year of construction: 2005 Blade max: 425 mm Motor power 4 KW Saw blade feed: 0-600 mm / min Cutting speed (SB 400 mm): 1-22 m / min stepless workspace square 90° Max: 130 x 130 mm *. 45° max: 120 x 120 mm *. Workspace flat 90° Max: 260 x 100 mm *. 45° max: 170 x 100 mm *. Work area round 90° Max: 140 mm *. 45° max: 140 mm *. * may vary by mounted pusher. Supply length 2-3000 mm (Saw) approximate weight: 1160 kg (Magazine), approx.: 300 kg Dimensions Lxwxh (saw) about: 1220mm x 1790mm x 1860mm (pusher) approx.: 4200mm x 900mm x 1000mm footprint Lxw 6200 mm x 1790 mm of Materialpusher built at Kasto GKS / U has two possibilities. For one this can be used as electrically operated length stop for the precise cut a single rod. A NC can run program in addition, this section lengths and quantities ...

Capacity round maximum diameter: 400 mm Angle degrees maximum: 90 Capacity square: 400 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm MACH-id     5161 MAKE          KASTO Germany TYPE            Twin A4 YOP              2001 SPECIFICATIONS Bandsaw / Circelblade / Automat       Automat Angle L / R Degrees      90 Gr. Cutting capacity 90 ˚ Ø   400 mm Cuttting capacity 90 ˚ Flatt       400 x 400 mm blade dimensions          5090 x 41 x 1,3 mm roller conveyor / push up / measuring    Roller conveyor      Cutting speed M/min        20 - 110 M/min DIMENSIONS Length        2500 mm  ...

Capacity round maximum diameter: 400 mm Angle degrees maximum: 90 Capacity square: 400 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm MACH-id   5002 MAKE        Kasto Germany TYPE          Twin A4 YOP             2003 SPECIFICATIONS Bandsaw / Circelblade / Automat     Automat Angle L / R Degrees      90 Gr Cutting capacity     90 ˚ Ø    400 mm Cuttting capacity 90 ˚ Flatt        400 x 400 mm blade dimensions     5700 x 41 x 1,3 mm Cutting speed M/min        20 - 110 M/min DIMENSIONS Length          3000 mm Width            2700 mm Height           22 ...

The KASTOtec AC5 is a fully automatic High-performance metal band saw for steel Manufacturer: Kasto Type: Tec AC5 Built: 2007 Saw band: 7675 x 54 x 1.3 mm Connected power: 23 KW Working area square 90° max.: 530 x 530 mm Working area Flat 90° max.: 530 x 630 mm Working range Around 90° max.: 530 mm Feed length (600mm in one stroke): 6-9999 mm Clamping device: hydraulic Weight (saw) approx.: 5750 Kg Dimensions LxWxH (without chip scraper)ca.: 2225 mm x 3855 mm x 2680 mm Installation area LxW approx.: 2225 mm x 3855 mm Addition: The sawing plant is in working condition and was used until dismantling. The condition of the machine is to be evaluated as good. The sale of this system is only to traders without guarantee and to the exclusion of any rifle performance. We accept no liability for errors or printing errors.

Capacity round maximum diameter: 400 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm MACH-id  3509 MAKE   Kasto Germany TYPE   Twin A4 YEAR  2006 SPECIFICATIONS Bandsaw / Circelblade / Automat  Bandsaw Angle L / R Degrees   0 Gr / Straight cutting Cutting capacity 90 ˚ Ø  400 mm Cuttting capacity 90 ˚ Flatt  400 x 400 mm blade dimensions5700 x 41 x 1.3 mm Cutting speed M/min   20 - 110 M/min DIMENSIONS Length   2980 mm Width   2700 mm Height  2200 mm

High-bay warehouses, case rack warehouses, long goods warehouses + Automatic high-bay warehouse for long goods + Manufacturer: KASTO Maschinenbau GmbH & Co. KG, Achern/Germany + Type: UNICOMPACT 3000 + Built: 1997 / electric and hydraulic retrofit 2011 + Max payload control unit 3 to. + Max Dimensions: 698 x 565 mm + Number of casees / compartments: 788 pieces + Partly with shelves for the caseshelves + Max load capacity per caseette / compartment: 3 to. + Max material length: 6800 mm + Retrofit: 2011, entire electrical equipment (control cabinets, cables) as well as hydraulic gripping units replaced + Rittal air conditioning system retrofitted for control cabinets of the control unit + Complete documentation on retrofit available + 1 x removal station incl. KSG picking crane (2 x 250 kg = 500 kg) + Picking crane very fast, steering position c ...

Metal miter circular saw make KASTO type GKS 400 PMachine -No: 3111101003, built in 1995Saw blade dimensions: 400 mmCutting area 90 ° round: 130 mmCutting area 90 ° flat: 260 x 80 mmCutting area 90 ° square: 120 x 120 mmCutting area 45 ° round: 130 mmCutting area 45 ° flat: 180 x 80 mmCutting area 45 ° square: 110 x 110 mmCutting area 60 ° round: 90 mmCutting area 60 ° flat: 130 x 80 mmCutting area 60 ° square: 90 x 90 mmCutting speed: 11/22 m / min.Drive power: 5 kWWeight: 1080 kgOutside dimensions approx: 1250 x 1205 x 1900 mmWith- CE markused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Automatic ironing machine make KASTO type EBS 340 AUMasch. -No: 104001146858367, year of construction 1981Technical specifications:Cutting area round: 340 mmCutting area flat: 340 x 280 mmCutting area square: 325 x 325 mmNormal feed length up to: 600 mmMultiple feed up to: 1800 mm6 stroke rates: 33 - 104 H / min6 cutting speeds: 13 - 40 m / minSaw blade dimensions: 600 x 52 x 2.5 mmDrive power: 6 kWDimensions: 2180 x 2110 x 1340 mmWith- Universal hydraulics- rapid traverse - lowering - device- Saw blade rupture protection- stepless clamping pressure regulationused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic. Parallel cut hacksaw machine make KASTO type WBS 150/170Machine -No: 122 041 120369320 Year 1985Technical specifications:Cutting area round: 150 mmsquare: 150 x 150 mmrectangle: 150 x 170 mmin miter at 45 °: 100 mmSaw blade dimensions: 300 x 30 x 1.5 mm (bore 8.5)Working height: 695 mm2 stroke rates: 75/80 H / minDrive motor: 380 V, 0.75 kWDimensions: 800 x 800 x 1350 mmWeight approx. 170 kgColor: blue / whiteWith- Coolant device- Material vertical stress- Stepless oil-hydraulic cutting pressure control with lifting in idle stroke- Depth of cut can be determined by depth limit switch- rotating machine headused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best  ...

Metal Circular Saw Cold Circular Saw Manufacturer Kasto Type GKS400P YOC 1998 Saw blade 400mm coming from below automatic hydraulic vice for material expansion Top condition, ready for immediate use.