used KASTO ebs

+++ ATTENTION - PRICE DROP!!! +++ Prices are rising, ours are falling!!! +++ Our prices are reduced by 50% now, +++ due to warehouse restructuring!!! +++ Also, consider taking a look at our other offers in stock. Hydr. hacksaw Kasto EBS 320 U manufacturer: Kasto type: EBS 320 U mach.-Nr.: 273463 year of construction: ??? comm.-Nr.: 3990297/509 stock-Nr.: 1836 +++ Regular Price: 3.650,- € > Reduced Price: 1.825,- € BN +++ All prices are shown without taxes (net price) Technical Data (According to manufacturer) sawing area: Ø 320 mm oder 320 x 300 mm saw blade dimensions: 575 x 45 x 2,5 mm 4 hub speeds: 40 / 57 / 80 / 115 hubs/min. drive power: 3,5 kW weight: ca. 750 kg standing area: B 1,80 x T 0,80 x H 1,10 m machine color: grauweiß / rot Features * 4 hub speeds * cutting pressure infinitely adjustable * closed hydraulic system *  ...

Automatic ironing machine make KASTO type EBS 340 AUMasch. -No: 104001146858367, year of construction 1981Technical specifications:Cutting area round: 340 mmCutting area flat: 340 x 280 mmCutting area square: 325 x 325 mmNormal feed length up to: 600 mmMultiple feed up to: 1800 mm6 stroke rates: 33 - 104 H / min6 cutting speeds: 13 - 40 m / minSaw blade dimensions: 600 x 52 x 2.5 mmDrive power: 6 kWDimensions: 2180 x 2110 x 1340 mmWith- Universal hydraulics- rapid traverse - lowering - device- Saw blade rupture protection- stepless clamping pressure regulationused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Key data: 560 mm, 850 mm, 450 mm

Reliable hacksaw in good condition, immediately available. Kasto EBS 400 Cutting diameter 560 mm Saw blade length 850 mm Stroke 450 mm Total power requirement 6 kW Machine weight approx. 1.2 t The machine can be viewed at any time. Take a look at our other listings. Transport possible throughout Europe If you have any questions, just write or call Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Tel. 016096679844

weight of the machine ca.:1200 kg total power requirement:5,5 kW dimensions of the machine ca.:1,8 x 1,67 x 1,30 m band length:575 mm max. clamping height:180 mm max. clamping width:350 mm table - height over basement:500 mm saw bow - stroke length:160 mm 100 % before loading warranty: none one used hacksaw, make KASTO, type EBS 320A, year of production 1963, general overhauled in 1972

cutting diameter: 560 mm band length: 850 mm stroke: 450 mm total power requirement: 6 kW weight of the machine ca.: 1,2 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting range round: 320 mm Cutting area square: 300 x 320 mm Saw blade dimensions: 575 x 50 x 2.5 mm Lifting speeds: 16 - 45 m/min Drive motor: 380 V, approx. 6 kW Space requirements: 1600 x 1580 x 1470 mm Weight: 1220 kg

Hacksaw, hacksaw machine, hacksaw machine -Manufacturer: Kasto, Hydr. hacksaw machine -Max. Cutting height: approx. 310 mm -Max. Cutting width: approx. 340 mm -Saw blade: length approx. 615 mm -Roller conveyor length: 1500 mm -Dimensions machine: 2300/1800/H1300 mm -Weight: 1500kg

cutting diameter: 320 mm capacity 45 degrees: round: 180 mm capacity 90 degrees: square: 320 x 320 mm capacity 45 degrees: square: 180 x 180 mm strokes per minute: 40 - 57 - 80 - 115 1/min cutting speed: 16 - 22 - 31 - 45 m/min dimensions of saw-blade: 575 x 55 x 2,5 mm total power requirement: 3 kW weight of the machine ca.: 700 kg dimensions of machine L x W x H: 1,55 x 0,70 x 0,98 m - with mitre cutting Accessories: coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kasto EBS Ø 450 mm Length of the sawblade : 700 x 55 x 2,5mm Max dia workpiece: 450 mm Length : 1915 mm Detph : 750 mm Height: 1090 mm Weight: 820 kg

Outdated: 2014 Year of construction: 2005 Blade max: 425 mm Motor power 4 KW Saw blade feed: 0-600 mm / min Cutting speed (SB 400 mm): 1-22 m / min stepless workspace square 90° Max: 130 x 130 mm *. 45° max: 120 x 120 mm *. Workspace flat 90° Max: 260 x 100 mm *. 45° max: 170 x 100 mm *. Work area round 90° Max: 140 mm *. 45° max: 140 mm *. * may vary by mounted pusher. Supply length 2-3000 mm (Saw) approximate weight: 1160 kg (Magazine), approx.: 300 kg Dimensions Lxwxh (saw) about: 1220mm x 1790mm x 1860mm (pusher) approx.: 4200mm x 900mm x 1000mm footprint Lxw 6200 mm x 1790 mm of Materialpusher built at Kasto GKS / U has two possibilities. For one this can be used as electrically operated length stop for the precise cut a single rod. A NC can run program in addition, this section lengths and quantities ...

Overhauled: 2018 Year of construction: 1985-2017 Saw band 275-315 mm Engine power 11.0 KW Cutting speed 225-1200 m / min Square maximum working range: 15-80 mm Round maximum working range: 15-90 mm Saw feed 2-100 mm / s adjustable Section length 5-250 mm Nachschubgeschw. Max 1000 mm / s (Saw) approximate weight: 1500 kg (Magazine) about: 1000 kg Dimensions Lxwxh (saw) approx.: 1100 x 1600mm x 2300mm (Magazine) about: 5500mm x 1400mm x 1600mm The machine is suitable facilities and construction for mass editing of non-ferrous metals and is the predecessor of KASTOwa M9 KASTOspeed M9. The saw line is currently in preliminary line status and can be visited only in original condition without function. The plant will be located after overhaul (retrofit) in like new condition, which is also guaranteed by our House. The machine will be overhauled on request in our House. Amon ...

Overhauled: 2018 Year of construction: 1985-2017 Band saw blade 4115 x 41 x 1,3 mm Engine output 4.0 KW Cutting speed 15-125 m / min Workspace square Max: 260 x 260 mm Flat maximum work area: 260 x 260 mm Work area round Max: 260 mm Workspace bundle Max: 150 - 260 x 200 mm (optional beam voltage) Saw speed 0-40 mm / s adjustable Section length 5-650 mm (~ 9999 mm multiple hub) Nachschubgeschw. 125 mm / s Weight approx. 2200 kg Dimensions Lxwxh 1670mm x2080mm x2130mm (chip scratch optional) The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The machine is completed retrofit, both technically and visually in mint condition. A visit of this saw system is possible at any time. The machine will be overhauled on request in our House. Among other things, following points are renewed: -Modification on PLC control Si ...

Machine type: hydr. Hacksaw Make: KASTO Germany Type: WBS 150 / 170 Machine No. No. 116 004 1203 /54407 Saw blade length: 300 x 32 x 2.0 mm Stroke cut pressure: hydr. selectable via adjustable wheel Cutting range at 90 Round: 150 mm Cutting area max. 150 x170 mm Cutting speed: approx. 12-24 m /min Cutting range at 90 flat: 170 x 150 mm Miter cut: adjustable up to 45 Cutting range at 45 Round: 100 mm Cutting area at 45 Flat: 100 mm Cutting range at 60 round: Cutting area at 60 flat: Vice clamping: 155 mm Working height: 700 mm Power transmission: stable gear ratio Saw motor: Bauknecht 380 Volt 50 Hz 0.55/0.75 KW 1390/2780 rpm Total power requirement: 1, KW Weight: approx. 170 kg Location: Rotthalmünster Germany Delivery time: immediately possible Freight base: from stock free loading truck Addition solid design stable ironing guide (adjusta ...

Cutting capacity 90 ° round: 320 mm cutting capacity at 90 ° flat: 320 x 245 mm cutting capacity in MITRE at 45°: 240 mm blade dimensions: 550 x 45 x 2 mm stroke speed: 43 116 RPM elect. Supply: 380 V, approx. 2.5 kW space: 1520 x 900 x 1000/1400 mm weight: 545 kg

Overhauled: 2018 Year of construction: 1991-20167 Band saw blade 250-285 mm Motor output 5.5 KW Cutting speed 35-160 m / min Square maximum working range: 15-60 mm Round maximum working range: 15-70 mm Saw feed 2-100 mm / s adjustable Section length 5-250 mm Nachschubgeschw. Max. 1000 mm / s (Saw) approximate weight: 1500 kg (Magazine), approx.: 800 kg Dimensions Lxwxh (saw) approx.: 1100 x 1600mm x 2300mm (Magazine) about: 7500mm x 1400mm x 1600mm The machine is suitable due to their facilities and construction for mass editing of steel and is the predecessor of KASTOwa C7 or C9 KASTOspeed. The plant will be located after overhaul (retrofit) in like new condition, which is also guaranteed by our House. The machine will be overhauled on request in our House. Among other things, following points are renewed: -New PLC control Siemens S7 -Conversion to Siemens HMI - ...

Technical data: -Cutting capacity 90 ° round 420 mm square 420 x 420 mm -Band saw blade dimensions 6300 x 41 x 1,3 mm -Cutting speed infinitely adjustable 0 x 130 m / min -hydr. Lifting - lowering of the column-guided saw frame - cut pressure infinitely adjustable 0-10 m / min -Hydr. movable work piece vise -biggest opening of Vice 480 mm -maximum passage height under the blade 480 mm -Material height approx. 700 mm -Total power 400 V / 8 kW -Hydr. Bundle clamping device -Coolant system -MOT. Spaeneraumbuerste -MOT. Chip conveyor - MOT feed roller 2000 mm -Space requirement approx. B 2200 x H 2500 / 2800 X 3200 mm -Weight approx. 3200 kg

The KASTOtec AC5 is a fully automatic High-performance metal band saw for steel Manufacturer: Kasto Type: Tec AC5 Built: 2007 Saw band: 7675 x 54 x 1.3 mm Connected power: 23 KW Working area square 90° max.: 530 x 530 mm Working area Flat 90° max.: 530 x 630 mm Working range Around 90° max.: 530 mm Feed length (600mm in one stroke): 6-9999 mm Clamping device: hydraulic Weight (saw) approx.: 5750 Kg Dimensions LxWxH (without chip scraper)ca.: 2225 mm x 3855 mm x 2680 mm Installation area LxW approx.: 2225 mm x 3855 mm Addition: The sawing plant is in working condition and was used until dismantling. The condition of the machine is to be evaluated as good. The sale of this system is only to traders without guarantee and to the exclusion of any rifle performance. We accept no liability for errors or printing errors.

High-bay warehouses, case rack warehouses, long goods warehouses + Automatic high-bay warehouse for long goods + Manufacturer: KASTO Maschinenbau GmbH & Co. KG, Achern/Germany + Type: UNICOMPACT 3000 + Built: 1997 / electric and hydraulic retrofit 2011 + Max payload control unit 3 to. + Max Dimensions: 698 x 565 mm + Number of casees / compartments: 788 pieces + Partly with shelves for the caseshelves + Max load capacity per caseette / compartment: 3 to. + Max material length: 6800 mm + Retrofit: 2011, entire electrical equipment (control cabinets, cables) as well as hydraulic gripping units replaced + Rittal air conditioning system retrofitted for control cabinets of the control unit + Complete documentation on retrofit available + 1 x removal station incl. KSG picking crane (2 x 250 kg = 500 kg) + Picking crane very fast, steering position c ...

specifications: - E.-Hydr. Lifting-lowering of the saw bar - Saw blade dimension 450 x 40 x 2.0 mm - Cutting range - 90° round approx. 250 mm - flat approx. 280 x 200 mm - square approx. 250 x 250 mm - 45° round approx. 180 mm - flat approx. 155 x 255 mm - max opening width of the clamping stick 300 mm - Lifting speeds + cutting speeds adjustable - Stroke numbers 62 / 125 m/min - Mean cutting speed 16 / 32 m/min - E.-Mot. Coolant device - Drive 400 V / 1.3 kW - Space requirement approx. W 550 x H 1250 x D 1500 mm - Weight approx. 190 kg

cutting diameter: 280 mm band length: 450 mm capacity 90 degrees: square: 240 x 240 mm capacity 90 degrees: flat: 280 x 160 mm capacity 45 degrees: round: 180 mm dimensions of saw-blade: 450x40x2,0 mm engine output: 2,6 kW height of material-table: 500 mm weight of the machine ca.: 495 kg range L-W-H: 1500 x 600 x 1340 mm Furnishing: - stepless hydraulic lowering - manual vice - Miter adjustment ü. vice - coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 520 mm saw band length: 6096 mm cutting width: 1,3 mm cutting range: 520x620 mm total power requirement: 6,578 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 3,3 x 2,2 x 2,35 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 320 mm saw band length: 4670 mm cutting width: 580 mm total power requirement: 7,4 kW weight of the machine ca.: 3 t Sawing range, circular, max. 100 - 320 mm vertical, max. 100/100 x 320/460 mm Length of cut, min./max. 0 - 580 mm Distance from column to saw band, max. 690 mm Cutting speed, infinitely variable 16 - 160 m/min Dimensions of saw band, length x Ø approx. 4,670 x 38 mm Length of remaining pieces, automatic/single cut 100/10 mm Saw blade drive, approx. 4.4 kW Total electrical load, approx. 7.4 kW - 380 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features: * Infinitely variable speeds of saw blade motor via servo motor and STOEBER drive. Display of cutting speed on control panel. * Infinitely variable settings of sawing feed with display of the current cutting speed. * Workpiece counter: Number of workpieces can be preset. Selection  ...

Capacity round maximum diameter: 400 mm Angle degrees maximum: 90 Capacity square: 400 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm MACH-id     5161 MAKE          KASTO Germany TYPE            Twin A4 YOP              2001 SPECIFICATIONS Bandsaw / Circelblade / Automat       Automat Angle L / R Degrees      90 Gr. Cutting capacity 90 ˚ Ø   400 mm Cuttting capacity 90 ˚ Flatt       400 x 400 mm blade dimensions          5090 x 41 x 1,3 mm roller conveyor / push up / measuring    Roller conveyor      Cutting speed M/min        20 - 110 M/min DIMENSIONS Length        2500 mm  ...

automatic feeder: ja material length: 460 mm material width: 320 mm weight of the machine ca.: 2 t documentation: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 380 mm max. band length: 430 mm weight of the machine ca.: 0,5 t : : : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.