cutting speed: 15 - 125 m/min cross cutting section: 260 mm band length: 4.115 x 41 x 1,1 mm cutting width: 260 x 260 mm Band Saw | KASTO - SSB 260 VA The machine is in a well-maintained condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: SSB260VA | SSB-260VA | SSB260 VA | SSB 260VA The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 250 mm band length: 400 mm capacity 90 degrees: square: 220 x 220 mm capacity 90 degrees: flat: 250 x 130 mm cutting speed: 11/19/32 m/min total power requirement: 2 kW weight of the machine ca.: 400 Kg dimensions of the machine ca.: 1700 x 550 x 1270 mm Hydraulic hacksaw with: - Electric-hydraulic raising and lowering of the saw frame - Coolant system - Good condition - Saw blades -- Saw blade dimensions 400 x 45 x 2.0 mm - Max. opening width of the vice 405 mm - Adjustable stroke speeds and cutting speeds - Mitre-adjustable vice The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 260 mm band length: 450 x 40 x 2 mm capacity 60 degrees: square: 240 mm : 260 x 180 total power requirement: 2,0/2,6 kW weight of the machine ca.: 1,4 t dimensions: 2,1 x 1,7 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This KASTO KASTOflex F Circular Metal Saw was manufactured in 2009. It features a weight of 2700 kg, operates on 400 V, and includes an automatic feed, residue bunker, and coolant device. It supports mitre cuts and has a loading station with a 20-compartment chain magazine. The discharge side boasts a 5 m long apron conveyor with programmable discharge stations. Consider the opportunity to buy this KASTO KASTOflex F Circular Metal Saw. Contact us for more information.
This sawing machine was manufactured in 2010. The KASTO Radial M10 can handle a variety of materials with cutting capacities up to 100 mm for round solid materials and tubes, and 170 x 90 mm for flat materials. It operates on a 400 V 50 Hz 3-phase connection and measures 600 x 800 x 1700 mm, weighing 452 kg. For more information about this sawing machine, please reach out to us.
Saw blade diameter: 350 x 2,5 x 32 mm capacity 90 degrees: square: 90 x 90 mm capacity 90 degrees: round: 100 mm capacity 90 degrees: flat: 170 x 90 mm Motor output: 1,8 kW machine weight ab.: 500 kg dimensions: 1200 x 800 x 2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A fully automatic metal band saw Kasto with roller conveyors is available. Mitre min./max.: -45°/60°, max. cutting diameter: 260mm, max. cutting dimensions X/Y: 300mm/260mm, saw band dimensions X/Y/Z: approx. 2910mm/27mm/0.9mm, machine dimensions X/Y/Z: approx. 1500mm/1850mm/1500mm, weight: approx. 900kg, control: Kasto BasicControl. Certain parts of the machine are defective. An on-site inspection is possible.
cutting diameter: 210 mm band length: 400 mm capacity 90 degrees: square: 190 mm capacity 90 degrees: flat: 240 x 190 mm cutting speed: 16/32 m/min total power requirement: 1,1 kW weight of the machine ca.: 180 Kg dimensions: 1,2 x 0,8 x 80,8 m Hydraulic hacksaw with: - Coolant device - good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A hydraulically operated high-performance bandsaw with two-column guide and full enclosure. Cutting range: 260×260mm, cutting speed: 20–110m/min (infinitely variable), weight: approx. 1700kg. Machine dimensions: approx. 1800×2200×1600mm. An inspection can be arranged by appointment.
cutting diameter: 280 mm band length: 450 mm capacity 90 degrees: square: 240 x 240 mm capacity 90 degrees: flat: 280 x 160 mm capacity 45 degrees: round: 180 mm dimensions of saw-blade: 450 x 40 x 2.0 mm engine output: 2.6 kW height of material-table: 500 mm weight of the machine ca.: 495 kg range L-W-H: 1500 x 600 x 1340 mm Furnishing: - stepless hydraulic lowering - manual vice - Miter adjustment ü. vice - coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Kasto Twin U 4 Depth of throat: 400 mm Max height of workpiece: 400 mm Sawspeed: 20-110 m/min Length of band saw: 5700 x 41 x 1.3 mm Power needed: 6 kW
Cutting range round: 560mm, cutting range flat (W x H): 620/560mm, material feed length, single: 900mm, multiple feed: 9999mm, shortest cut length: 6mm, minimum diameter to be cut: 15mm, minimum remnant in single cut: 15mm, shortest remnant length in automatic mode: 80mm, saw motor power, frequency-controlled: 5.5kW, cutting speed, stepless: 13-127m/min, saw blade dimensions: 7400/54/1.6mm, material support height: 700mm, total drive capacity in basic configuration: 12kW, length: 2370mm, width: 3610mm, overall dimensions with chip conveyor (L/W): 2370/3610mm, machine table height lowered: 2230mm, weight: approx. 5.2t with chip conveyor. An inspection on site is possible.
CONTROLS PLC TECHNICAL SPECIFICATION max. cutting height: 360 mm sawband length: 5334 mm sawband width: 41 mm max. bar feed (single stroke): 600 mm cutting speed min.: 14 m/min cutting speed max.: 102 m/min power of band drive: 5.5 kW ELECTRICAL SPECIFICATIONS total power consumption: 10 kW DIMENSIONS / WEIGHTS space requirements -left/right-: 2840 mm space requirements -front/back-: 2800 mm total height: 2130 mm total weight approx.: 2540 kg
Manufacturer: KASTO Model: Twin A 4 AU CNC Year of Manufacture: 2004 Cutting Capacity: 400 mm x 400 mm (Ø 400 mm) Technical Specifications - Cutting Range Round: 400 mm - Cutting Range Square: 400 x 400 mm - Material Feed per Stroke (automatic): 600 mm - Multiple Feed Length: 99,999 mm - Cutting Speed: Stepless, 20–130 m/min - Total Drive Power: 7 kW - Saw Motor Power: 4 kW - Speed Reduction: Stepless adjustable - Material Height: 100 mm - Saw Blade Dimensions: 5700 x 41 x 1.3 mm - Shortest Cutting Length (automatic): 6 mm - Shortest Remnant Length (automatic): 80 mm - Voltage: 380V / 50Hz - Machine Dimensions (LxWxH): 2415 x 2400 x 1720 mm - Weight: 2200 kg Special Accessories - Coolant system - CNC control - Idle run monitoring - Machine roller table - Band tension control - Height measurement system - Light barrier - End stop Optional Roller Conveyors: - Roller Conveyor 30 ...
cutting diameter: 520 mm saw band length: 7239 mm cutting range square: 520 x 520 mm feed length: 500 mm feed length: 4500 mm cutting length min.: 6 mm : 10/100 mm cutting speed: 20 - 130 m/min dimensions of saw-band: 7239 x 50 x 1,3 mm weight of the machine ca.: 4,2 t dimensions: 2300 x 3420 x 2385 m Control: MINIPOS 807 CNC control Minipos 807 Special accessories: - Coolant device - Chip conveyor - Removal roller conveyor - Standard jaws The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 430 mm saw band length: 6830 mm cutting range: 430 x 430 mm control: Siemens Simatic HMI cutting speed: 80 m/min height of material-table: 700 mm dimensions of the machine ca.: 5,36 x 6,83 x 2,41 m total power requirement: 25 kW weight of the machine ca.: 4920 kg Equipment/accessories: - Infinitely variable cutting feed rate - Pump capacity 75 l/min - Roller conveyor - Chip conveyor - Technical documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 320 mm saw band length: 6300 mm cutting range: 420 x 320 mm control: Siemens Simatic HMI cutting speed: 20 - 130 m/min height of material-table: 950 mm total power requirement: 15 kW weight of the machine ca.: 2920 kg dimensions of the machine ca.: 6,35 x 6,76 x 2,41 m Machine overhauled by Kasto in 2016 Equipment/accessories: - Cutting feed continuously adjustable - Pneumatic connection 6 bar - Coolant 75 l - Pump capacity 40 l - Roller conveyor - Chip conveyor - Technical documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 360 mm cutting width at round material: 15 - 100 mm cutting width at rectangle material: 15 - 80 mm cutting speed: 17 - 175 m/min Control: Easy Control KASTO total power requirement: 21 kW weight of the machine ca.: 3,4 t dimensions of the machine ca.: 3,3 x 1,6 x 2,2 m The saw blade drive gearbox was renewed in 03/2023 by the manufacturer Material feed Material discharge Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 280 mm saw band length: 4930 mm capacity 90 degrees: square: 280 x 280 mm capacity 45 degrees: round: 280 mm capacity 45 degrees: square: 280 x 280 mm capacity 60 degrees: round: 220 mm capacity 60 degrees: square: 200 x 200 mm feed length: 600 mm feed length: multiple: 5400 mm cutting speed: 17 - 90 m/min length of rest piece min/max: min. 30 mm saw diameter: min. 10 mm control: KASTO, Compact Control total power requirement: 5 kW weight of the machine ca.: 1,75 t dimensions of machine L x W x H: 2,68 x 2,54 x 1,59 m Accessories: coolant, roller track 3300 mm length, 300 mm width, roller track 1350 mm length, 300 mm width The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cutting capacity: round material 90°: 260mm, flat material 90°: 300mm/260mm, round material -45° to 45°: 200mm, round material 60°: 165mm, saw band dimensions X/Y/Z: 2910mm/27mm/0.9mm, cutting speed: 110m/min. Machine dimensions X/Y/Z: approx. 1500mm/1850mm/1500mm, weight: approx. 900kg, control: Kasto CompactControl, operating hours: approx. 200h. The machine control has been renewed. Documentation available. An on-site inspection is possible.
Hydr. Hacksaw, hacksaw, lifting saw KASTO type PSB WBS 210 / 230Masch. No. 115 106 1212 / 72783 Year of construction 1986Sawing area - Round 250 mmSawing area - Square 225 x 225 mmSawing area - Rectangle 260 x 100 mmCutting speed 11 -13 - 17 - 22 - 26 - 34 m/min. Saw blade length 400 mmMotor power 1.4 and 1.8 kW pole-switchableMains connection 380 volts, 50 Hz- only for 90 cuts, no mitre adjustment- Saw motor with 2 speeds and 3 V-belt steps- Hydraulic saw bar feed- hydraulic
saw blade diameter: 360 / 425 / 460 mm cutting diameter: 10 - 140 mm stroke: mm cutting speed: 25 - 160 m/min total power requirement: 35 kW weight of the machine ca.: 4,2 t dimensions of the machine ca.: 2,8 x 1,8 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 520 mm saw band length: 7239 mm cutting width: 1,3 mm Control: POSIMOD cutting range - square -: 520 x 520 mm feed length: 500 mm feed length: multiple: 4500 mm min. cut-off length: 6 mm length of rest piece min/max: 10 / 100 mm cutting speed: 20 - 130 m/min dimensions of saw-band: 7239 x 50 x 1,3 mm sawing motor: 5,5 kW total power requirement: 10,0 kW weight of the machine ca.: 3,8 t dimensions of machine L x W x H: 3,42 x 2,30 x 2,40 m - 2 column guided - Accessories: roller track 2500 mm length, chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 15 - 560 mm : 560 x 630 mm dimensions of saw-band: 7.400 x 54 x 1,60 mm Control: KASTO material feed - single: 900 mm multiple feeding length: max. 9.999 mm cutting length min.: 6,00 mm sawing motor: 5,50 kW cutting speed: 13 - 127 m/min height of material-table: 700 mm total power requirement: 12,00 kW weight of the machine ca.: 6,00 t dimensions of the machine ca.: 3,70 x 2,50 x H2,50 m Automatic two-column band saw with KASTO Compact Control, frequency-controlled saw band drive, chip conveyor, infeed roller-conveyor electrically driven (6m), 3x roll-conveyor 1m and outfeed roller 2m, Machine can be inspected under power. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: Ø 340 / 340290 mm band length: 600 52 2,5 mm cutting lenght max.: x 600 mm total power requirement: 6 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2,52,51,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 380 mm max. band length: 430 mm weight of the machine ca.: 0,5 t : : : Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 1060 mm saw band length: 11.430 x 80 x 1,6 mm cutting width: 1,6 mm cutting range: 1060x1260 mm Control: CNC cutting speed: 12-90 m/min power capacity: 11 kW table load: 20 t Cutting Length max.: 6100 mm total power requirement: 20 kW weight of the machine ca.: 21,1 t dimensions of the machine ca.: m Automatic feed length 2,100 - 6,100 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your vis ...
