used HYDRAP hpd

pressure: 400 t stroke: 300 mm table surface area: 1200 x 700 mm ram surface: 1200 x 700 mm dayligth: 500 mm adjustment of stroke: 300 mm return capacity: 348 kN capacity of ejector: 100 kN ejector stroke: 100 mm total power requirement: 65 kW weight of the machine ca.: 28 t dimensions of machine L x W x H: 4,4 x 2,75 x 4,0 m = Frame press Accessories: tool changing table - next safety inspection according to stamp 05/2021 - - with cutting shock absorption damping force 4000 kN damping stroke 5 mm spindle adjustment 200 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t passage width: 1350 mm stroke: 300 mm total power requirement: 16 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 2,0 x 1,8 x 3,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 250 t distance between columns: 1100 mm stroke: 400 mm dayligth: 600 mm table surface area: 1000x800 mm ram surface: 1000x800 mm table height: 950 mm total power requirement: 65 kW weight of the machine ca.: 25 t dimensions of the machine ca.: BxTxH 0000x0000x3900mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 250 t distance between columns: 1100 mm stroke: 400 mm dayligth: 600 mm table surface area: 1000x800 mm ram surface: 1000x800 mm table height: 950 mm total power requirement: 65 kW weight of the machine ca.: 25 t dimensions of the machine ca.: BxTxH 0000x0000x3900mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

YOM: 5.1987 / 2003 - the press was generally renovated by the manufacturer Schuler, along with the replacement of electrics, cables and controls for Siemens Condition: Very good Technical details: Pressing force: 5000 kN, 500 tone Table dimensions: 1500 x 1400 mm Distance from Clamping surface to ram: 1250 mm Distance from the clamping table to the hold-down device min.405 mm, max.605 mm Clamping surface thickness: 335 mm Number of flutes, dimensions: H12 DIN 650, 36 mm Ram size Stroke:: 500 mm Hold-down size Stroke: 200 mm Press height / weight: 5800 mm / 45 tone

pressure:400 t distance between columns:3250 mm distance table/ram, max. stroke up, adjustment up:1000 mm stroke:800 mm table surface area:3250 x 1400 mm table height over floor:1250 mm die cushion capacity:170 t die cushion stroke:200 mm die cushion area:1800 x 1000 mm distance between cutting impact cushioning:2610 mm side window:800 mm ram surface:3250 x 1400 mm return capacity:51 t speed down:300 mm/s speed up:300 mm/s working speed:16 - 33 mm/s quantity of oil:2900 l power requirement:100,0 kW weight:70,0 t Dimensions (WxDxH):4,9 x 3,1 x 7,6 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 cutting impact absorption:hydraulic

pressure:125 t distance between columns:2100 mm stroke:1000 mm Distance table/ram, max. stroke up, adjustment up:1300 mm Table area:2230 x 1300 mm die cushion pressure in table:63 t die cushion stroke in table:60 mm surface of drawing cushion:1000 x 900 mm table height above floor:1050 mm side window:1000 mm ram surface:2100 x 1000 mm speed down:50 mm/s speed up:50 mm/s working speed:10 mm/s oil volume:410 l height above floor:5,95 mm power requirement:22,0 kW Weight:31,0 t Dimensions (WxDxH):3,1 x 1,7 x 5,95 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic foundation pit:not necessary

pressure:200 t distance between columns:1400 mm stroke:300 mm distance table/ram, max. stroke up, adjustment up:500 mm table surface area:1300 x 1100 mm pressure of drawing cushion in table:80 t stroke of drawing cushion in table:150 mm die cushion area:700 x 700 mm capacity of ejector in ram:10 t ejector stroke in ram:50 mm table height over floor:930 mm side window:770 mm ram surface:1300 x 1100 mm speed down:400 mm/s speed up:410 mm/s working speed:20 - 50 mm/s return capacity:30 t oil volume:1350 l power requirement:70,0 kW weight:23,0 t dimensions (WxDxH):4,5 x 3,0 x 3,5 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic ejector in ram:hydraulic foundation pit:not necessary

Pressure total: 315 ton Stroke: 600 mm Daylight: 800 mm Table surface area : 2000 x 1200 mm Slide area: 2000 x 1200 mm Approach speed: 450 mm / sec Working speed: 14 - 40 mm / sec Return speed: 300 mm / sec Table height over floor: 900 mm Oil volume: 2000 l Required power: 75 kW Height over floor approx.: 5000 mm Dimensions L x W x H: 4900 x 3200 x 5000 mm Weight of machine approx.: 45 ton

pressure: 500 t passage width: 750 mm stroke: 120 mm total power requirement: 57 kW weight of the machine ca.: 16 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 500 t passage width: 750 mm stroke: 120 mm total power requirement: 57 kW weight of the machine ca.: 16 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 500 t passage width: 750 mm stroke: 120 mm total power requirement: 57 kW weight of the machine ca.: 16 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 000 Dimensions (HxWxD): 800x800x1200 mm weight: 150 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Condition: very good Control system: Siemens Technical details : Machine type: SH-200-2.7 x 1.7 Fabrication No.: P/100010 Year: 2005 TOTAL PRESS WEIGHT: 37300 kg Nominal force: 2000 kN Stroke length max.: 900 mm Installation height: 1400 mm Closing speed: 400 mm/s Working speed max.: 84 mm/s Working speed at nominal force: 30 mm/s Tool footprint max.: 2700 x 1500 mm Tool footprint min.: At nominal force: 1600 x 1100 mm Tool height min.: 500 mm Total tool weight max.: 15 000 kg Tool upper part weight max. : 7500 kg Permitted External load : left-right 30 kNm Permitted Except Load : front-rear 15kNm Installed capacity: 87 kW Rated current: 155 A Tension: 400 V Frequency: 50 Hz Hydraulic operating pressure: 289 bar Total amount of oil: 1500 l Type of oil: HLP 46, DIN 51524

Hydraulic power pack, hydraulic pump, hydraulic pump -double pump -Max. Pressure: 60/200 bar -Liter output: 6/24 l/min -Motor power: 5.5 kW -Speed: 1445 rpm -Hydraulic valves -Hydraulic tank -Hydraulic filter -Weight: 230 kg

pressure: 100 t throat: 260 mm stroke: 300 mm table-size: 500 x 500 mm ram head dimension: 650 x 500 mm dayligth: 700 mm oil volume: 600 l capacity of ejector in table: 40 t return capacity: 13 t total power requirement: 22 kW weight of the machine ca.: 7 t dimensions of the machine ca.: 2.07 x 2.48 x 3.3 m - Ejector in the table, pressure 40 t, stroke 100 mm - Laterally movable work area protection with ESPE (light barrier) this with cycle operation - Cooling, behind the machine, backwater boiler (beige) air cooler (grey- blue), along with complete piping and control etc. - Press safe for unrestricted manual insertion operation - Documentation in german available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Effective stroke: 200 mm Drive type: Hydraulic Voltage: 380 V Rated current: 40 A Power: 20 KW Oil viscosity: HLP 48 Oil quantity: 320 l Approx. Onsite Dimension. (l x w x h): 1,900 x 2,400 x 2,750 mm, weight approx.: 7,000 kg

PRESS DESIGN   drive system: hydraulic   frame design: C-frame, single sided PRESS FORCES   total force (nominal): 12 to SLIDE   stroke: 200 mm ELECTRICAL SPECIFICATIONS   mains voltage: 380 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   total weight approx.: 1000 kg

CNC HORIZONTAL MACHINING CENTER Good condition Control type Fanuc 18I-MB X Axis Stroke 710 mm Y Axis Stroke 610 mm Z Axis Stroke 610 mm Table dimensions 500 x 500 mm Spindle speed 15,000 rpm Spindle connection DIN 6987-1 Permissible weight 500 Kg Tool magazine 60 positions Cooling pressure 50 Bar Table indexing 0,001 Chip Evacuator Accessories

Hydraulic Press SCHULER HYDRAP 315 Manufacturer: SCHULER Model: HPDZb 3150-3000/1300 New in: 2001 Condition: Very good Technical details Press capacity: 315 T Table dimensions: 3 000 x 1 300 mm Min. die stamping dimensions: 2 000 x 866 mm Slide stroke: 800 mm Max. shut height: 1 300 mm Number of strokes per min (regulated): 13-46 Cusion capacity: 160 T Cusion stroke: 200 mm

Copy milling machine make ELUMATEC type KF 78Machine -No: 20853 Year 1985Working size vert. Unit: 100 x 290 mm stroke 120 mmProcessing size hor. Unit: 70 x 270 mm stroke 80 mmSpeed of the milling spindle: 12000 rpm.Compressed air connection: 6/8 atüCompressed air requirement: 200 l / minClamping range of profiles: 150 x 150 mmDrive power: 740 W / 1 hpDimensions L x W x H approx: 900 x 800 x 1500 mmWeight approx. 250 kgWith- Length stopused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Bench drill make PERFEKT type X 15Machine -No: 872075 built in 1987set up for automatic workflow!Technical specifications:Drilling capacity max.: 15 mmSpindle mount: MK 210 spindle speeds: 225 - 3000 rpm.Quill stroke: 90 mmProjection: 200 mmTable size: 240 x 240 mmDrive power: 0.5 hpDimensions L x W x H approx.: 700 x 750 x 920 mmadditionally equipped with- pneumatic moveable clamping table 280 x 165 mm for automatic longitudinal travel- pneumatic quill feed- Blow-out device- maintenance unitused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Vertical drilling machine make ALZMETALL type Abomat 40Fabr. -No: 147 A built in 1968Drilling capacity in St / GG: 45/60 mmSpindle mount: MK 5Table size: 500 x 500 mm12 spindle speeds: 35 - 1400 rpm.7 automatic feeds: 0.04 - 0.3 mm / revSpindle head diameter: 62 mmDrilling carriage stroke: 400 mmDischarge: 330 mmMax. Distance table to spindle: 1165 mmMax. Distance base plate to spindle: 1550 mmDrive power: 4 hpDimensions L x W x H: 1350 x 600 x 2250 mmWeight approx. 1200 kgWith- semi-automatic workflow- electr. controlled jump feed- Two-hand releaseused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Jig boring machine make SIP type MP 3 KFabr.-Nr. 9809 year 1981Clamping surface of the worktable: 520 x 380 mmLongitudinal adjustment of the work table: 450 mmTransverse adjustment of the drill spindle slide: 350 mmDistance between table surface max .: 520 mmxa0xa0xa0 and drill spindle: 120 mmPassage between the uprights: 600 mmVertical adjustment of the crossbeam: 400 mmDrill spindle: MK 2Infeed stroke: 150 mmSpindle speeds: 75-2000 rpm.automatic feed: 0.02-0.18 mmDrilling capacity in cast iron Drm.:25 mmxa0xa0xa0 in mild steel Drm.:20 mmGr. boring diameter: 100 mmReading on the auxiliary scale: 1 mmAccuracy: 0.005 mmMain drive motor: 1 hpDimensions L x W x H: 1740 x 1520 x 1880 mmWeight approx: 1680 kgWith- guide arm- Coolant deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are  ...

Drilling and milling machine make WOTAN type B 75 TFabr. -No: 58252 Year of construction 1965Spindle diameter: 75 mmTransverse travel = X: 800 mmLongitudinal path = Y: 800 mmVertical path = Z: 800 mmSpindle stroke = W: 600 mmDrill spindle inner cone: ISO 40Drilling depth in one go without quick tension: 600 mmwith quick tension: 550 mmVertical adjustment above table: 0 - 800 mm20 spindle speeds: 12.5 x 1000 rpm.Table mounting surface: 800 x 1000 mmSwivel range: 360 °Transverse movement: 800 mmLongitudinal movement: 800 mm27 feed steps: 0.02 - 8 mm / revRapid traverse: 2.4 m / min12 metric thread pitches: 0.5 - 8 mmFaceplate diameter: 420 mmmax. facing diameter: 560 mmMovement of the slide valve: 120 mmFeed range: 0.04 - 16 mm / revDrive power: 9 hpDimensions approx: 3400 x 1800 x 2500 mmWeight approx: 6800 kgWith- 3-axis digital display- Cooling devicedespite the year of construction in ...