used HOMAG fl

Aggregate for 4-Achs CNC to the extension for the 5-th axis

ID-Nr. 1-056-11-0400

Control cards -Replacement cards for: -Homag type: KFL 53 -Homag type: KFL 54 -Homag entrance cards -Homag control cards -Homag controller cards -Cabinet: is only sold complete -Weight: 200 kg

Description: ATTENTION: Location 35614 Aßlar, Germany Well-maintained HOMAG Optimat BAZ 311/52/K CNC machining center with HOMAG Optimat TBA 330/20/16 vacuum feeder, main spindle with Flex5 interface and web edge press unit. ,The main spindle was replaced at the beginning of March 2024 and the costs were EUR 19,000! HOMAG Optimat BAZ 311/52/K, machine no. 0-201-21-4391 HOMAG Optimat TBA 330/20/16, machine no. 0-205-21-4383 Workpiece length: - Single occupancy with tool diameter. 25mm max. 5200mm - Pendulum assignment with tool diameter. 25 mm max. 2150 mm with pendulum occupancy Workpiece width front stop: - max. 1525 mm with tool diameter 25mm - max. 1525 mm with web edge pressing unit - max. 1450 mm for all units Workpiece width stop at the back: - max. 1730 mm with tool diameter 25mm - max. 1650 mm with web edge press unit - max. 1600 mm for all units Main spindle:  ...

Description: Flexline HOMAG PROFI KAL 330/6/A3/S2 edge banding machine  , , , serial number: 0-200-24-9153 is equipped as follows:  , , , HOMAG PROFI TBL 100/35/12 feed table with fully automatic workpiece feeding system WZ10 for workpieces with different dimensions in longitudinal and transverse direction Technical data: - Workpiece length 250 - 2500 mm - Electro-pneumatically controlled cross weigher - Air cushion table ( is not included in the scope of delivery )  , , , 2 HOMAG PROFI KAL 330/6/A3/S2 edge banding machine Technical data: - Universal trimming unit UF11, electro-pneumatically controlled  ,Note: the feedback is not included in the scope of delivery  , serial number: 0-200-24-9153, workpiece thickness: max.60 mm, feed: 18-25 m/min, joint trimming unit: Ja/Yes, snipping unit: Ja/Yes, fine trimming unit: Ja/Yes, pro ...

Homag saw unit Brand: Homag Type: 000W04206041 Year of construction: 2000 M-No.: 4-02078 000W04206041 Nmax: 9,900 rpm

Homag saw unit Brand: Homag Type: 000W04206041 Year of construction: 1998 SKU:4-060-24-0165 2.056.10.3021 Saw blade: ø180 mm Nmax: 10,000 rpm

Manufacturer: Homag, Type: Profi BAZ/20/40/14/3/KA, Year: 2003, Control: Woodwop, Maschinensteuerung: Homag, Programming station office: möglich, Work piece width min-max mm: 1400, Min.-max. workpiece length in mm: 5200, Min.-max. workpiece height in mm: 10-60, C axis: yes, Number of milling spindles vertical: 2, Anzahl Frässpindeln horizontal: no, Milling engine 1 hours power: ca.12, U/min 1) Vertikal: 1500-24000, Milling engine 2 hours power: ca.12, U/min 2) Vertikal: 1500-24000, Number of tool changers: 2 (1 defekt), Tellerwechseler: yes, Number of tools per tool-magazine: 12, Mitfahrender Werkzeugwechsler: yes, Belt conveyor: Rollentransport, Traverse table: yes, Stops in the table front: yes, Automatische Beladung: yes, Automatschische Entladung : yes, Vacuum pumps m³/h: 100, Tool clamping system: HSK 63, Saw unit: yes, Radial arm machine: yes, Laser positioning: no, incl. to ...

Manufacturer: Homag Getriebe Verstellung Oberdruck/Maschinenhalter Bett, Type: auf KF Homag, FREETEXT1: 3 Verstellgetriebe, FREETEXT2: 4 Winkelhalter Bett,

Manufacturer: Homag aus Homag KF 20, Type: Ein und Ausgangskarten Streckensteuerung,

Manufacturer: KEB Homag Umrichter, Serial number: 07.F0.R01-1228, was installed in machine: Homag Maschine, Production number: 95150305/129518, Frequency converter: yes, Power Output: 750, FREE TEXT: 750 W 2/4 50/60 Hz,

Manufacturer: Homag , Type: Power FR 20/09/15/L/Q1, Year: 2007, Control: Powercontrol Homag, Conveyor: Nockenkette, Work piece width min-max mm: 350, Min.-max. workpiece length in mm: 220-1500, Min.-max. workpiece height in mm: 10-30, Machine with controlled dogs: yes, Cam distance mm: ca.500, Feeding speed min-max m/min: ca.60, Feed stepless: yes, verängerte Kette mm: yes, Overall milling units: 5, Moulding units swivel-mounted: 5, gesteuerte Fräsaggregate: keine, 1st milling unit kW / rpm: 6,6/5850, 1. swivelling controllable: yes, 2nd milling unit kW / rpm: 6,6/5850, 2. swivelling controllable: yes, 3rd milling unit kW / rpm: 6,6/5850, 3. swivelling controllable: yes, 4th milling unit kW / rpm: 6,6/5850, 4. swivelling controllable: yes, 5th milling unit kW / rpm: 6,6/5850, 5. swivelling controllable: yes, Year :2007

Manufacturer: Homag PU und EVA, Type: KAL 310 310/6/A3/S2, Year: 2008, Control: NC 22, Software: Homag, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 65, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 12-60, Min-max feed m/min: 10-25, Premilling: yes, Fine milling: yes, Application of separation agent: yes, IR zone: yes, Coil magazine: 2-fach, Mitre stations: HL 81, Bevel milling: yes, Corner tracing type: FF 12, 4 motors: Ja, Radius scraper: yes, Type of scraper: PN 10, Flat scraper: FA 11, 4 motors: Ja, Ersatzverleimteil : PU, Bonding part EVA: EVA, Buffing unit: yes, Separation agent setup: yes, Year :2008

Manufacturer: Homag, Type: Ritzsäge Nachschwenkeibrichtung für links und rechts, From machine: Homag FPL, Shaft dimensions L x D mm: 1200,

Manufacturer: Homag, Type: Motorhalterplatte mit pnematischen ein und Ausrücken, From machine: Homag FÜL 526,

Manufacturer: Homag, Type: KAL 310, Year: 2004, Control: NC 21, Software: Homag, Min-max edge material mm: 0,5-3, Min.-max. workpiece length in mm: 150-3000, Min.-max. workpiece height in mm: 10-55, Min-max feed m/min: 24, Axis control: yes, Premilling: yes, Fine milling: yes, Application of separation agent: yes, IR zone: yes, Power per lamp: 400 Watt, Coil magazine: einfach, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Bevel milling: yes, Radius milling axis adjustment: lyes, Corner tracing type: FK 11, 2 motors: 2, Radius scraper: yes , Scraper with axis adjustment: yes, Flat scraper: yes, Spraying system 2: yes, Cleaning nozzles: yes, Bonding part EVA: yes, Pre-smelting Kg/Hr: yes, Buffing unit: yes, Top pressure belt/roller: Band, Separation agent setup: yes, Workpiece support: yes, Machine lenght mm: ca.9,5, Noise enclosure: yes, Return type: Bargsted ...

Manufacturer: Homag, Spare part from machine: Homag Fräsständer ohne Motore, for left machine side: Linke und rechte Seite, Pneumatically controlled: yes, FREE TEXT: Nur Ständer ohne Motore/mit seitlichen Schwalbeschwanzführungen,

Manufacturer: Homag Postforming, Type: VFR10/22, Year: 1997, Control: Homatic/NC 16, Software: Homag, Finished product: Türzargen/Verkleidungen, Indirekt Postforming: yes, Work piece width min-max mm: 60-1000, Min.-max. workpiece length in mm: 800-2500, Min.-max. workpiece height in mm: 16-28, Workpiece protrusion mm: 55-30, Profilarten : L-Profil/U-Profil, Postformig Fräsaggregate Stück/kW: 2 X 1 kw, Universalfräsaggregat Stück/kW: 2 X 4 kw, Leimauftrag für Profile mm: U-105, Düsensystem: yes, Furnierbefeuchtung: yes, Heiz und Ablüftstation: yes, Profildruckstrecke: yes, Fräsaggregat : yes, Fräsaggregat U-Profil/Nuten: yes, Year :1997

Manufacturer: Homag Zerspaneraggregat, Ersatzteil aus Maschine: Homag KF 62, für Maschinenseite rechts: yes, Motorenanzahl: 2, kW-Leistung : 3,0/4,4, Volt/Hz : 380/100, Drehzahlen U/min : 2880/4400,

Manufacturer: Homag Vorschmelzeinheit, Spare part from machine: aus Homag KF, Type: Q/34, Gluing part left side: yes, Plug connection: yes, Temperature control: no,

Manufacturer: Homag, Type: Hubschwingen für schwere Teile, FREETEXT1: war in Homag Tisch verbaut, FREETEXT2: Menge 4 Stück/Länge ca1250 mm<CRLF>aushebehöhe ca.200 mm, FREETEXT3: inkl Verschraubung Halterrung an Profilschiene,

Manufacturer: Homag Ständer ohne Anbauaggregate , Spare part from machine: Homag ,

Pressure zone turret, softforming interchangeable profiles for softforming machines, double-end tenoners, edging machines, scoring motor, chipper motor, milling motor for edging machines -HOMAG softforming interchangeable profiles for softforming profiles can be quickly converted to straight edges -with heavy leadership -laterally movable -with counter -HOMAG milling unit for joint milling -with heavy dovetail guide -1x engines Perske -Motor type: -Power: 3.0/4.4 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1800/1400/H1300 mm -Weight: 712 kg

Pressure zone turret, softforming interchangeable profiles for softforming machines, double-end tenoners, edging machines, scoring motor, chipper motor, milling motor for edging machines -HOMAG softforming interchangeable profiles for softforming profiles can be quickly converted to straight edges -with heavy leadership -laterally movable -with counter -HOMAG milling unit for joint milling -with heavy dovetail guide -1x engines Perske -Motor type: -Power: 3.0/4.4 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2860/5860 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1800/1400/H1300 mm -Weight: 712 kg

Manufacturer: Homag, Type: NFL 26/6/10/PW/L, Year: 2002, Control: Homag, Work piece width min-max mm: 136-250, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 10-25, Working width min-max mm: 136 - 250, Feeding speed min-max m/min: 15 - 60, 1st milling unit kW / rpm: Ritzen 4,5 kW/6000 U/min, 2nd milling unit kW / rpm: Ritzen 4,5 kW/6000 U/min, 3rd milling unit kW / rpm: 6,6 kW Profilfräsen 6000 U/min, Free space for units: 2x 460 mm, Machine overhauled: no, System dismantled: yes, Year :2002