used HOMAG bof

Current: 63A, nominal voltage: 400V.

Manufacturer: HOMAG Optimat , Type: BOF 32/30/K, Year: 1999, Control: Homatic, Maschinensteuerung: 80, Programming station office: 3600, Work piece width min-max mm: 1200, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 1, Throuh running machine: 2, Feeding speed max m/min: HSK 63, Working range X: 12, Working range Y-axis: 24000, Working range Z: 12, Working range Y-axis: 24000, B-axis: 2, Pendulum processing: 12, Tool adaption system: 2 X 12, Milling engine 1 hours power: 2 X 7, U/min 1) Vertikal: 2 X 6, Milling engine 2 hours power: 2 X 6, Frässpindel horizontal 1 kW: 4, U/min 1) Horizontal: yes, Bohrergetriebe Horizontal: 2 X 120 , Kettenwechsler: no, Working widht max mm: yes, Max. working depth in mm: inkl Werkzeuge und Zubehör, Year :1999

Manufacturer: HomagTürenfertigung mit mit Verleimteil und KUKA Roboter, Type: BOF / BAZ20/50/18/2/D, Year: 2002, Control: Homatic PC 83, Software: Woodwop, Work piece width min-max mm: 1600, Min.-max. workpiece length in mm: 800 - 3500, Min.-max. workpiece height in mm: 12 - 60/120, Working range X: 5800, Working range Y-axis: 1600, Working range Z: 160, C axis: 2, Work piece width min-max mm: 1600, Min.-max. workpiece length in mm: 800 - 3500, Min.-max. workpiece height in mm: 12 - 60/120, Number of milling spindles vertical: 2, Tool adaption system: HSK F63, Milling engine 1 hours power: 14,5, rpm 1): 1500 - 18.000, Milling engine 2 hours power: 14,5, rpm 2): 1500 - 18.000, Kettenwechsler: 70, Pickup Wechlser: 6, Number of tools per tool-magazine: 6 + 70+ 20, Mitfahrender Werkzeugwechsler: yes, Belt conveyor: yes, 2 station allocation: yes, Vacuum pumps m³/h: 2 x 66, Rigging supp ...

Manufacturer: Homag mit Verleimteil, Type: Optimat BOF / 40 / G , Year: 2000, Control: WoodWOP, Programmierplatz Büro: yes, Work piece width min-max mm: 1050/1200, Min.-max. workpiece length in mm: 4800, Min.-max. workpiece height in mm: 60/200, C axis: yes, Tool adaption system: HSK F63, Milling engine 1 hours power: 12, rpm 1): 1500 - 18000, Number of tool changers: 1, Number of tools per tool-magazine: 12, Mitfahrender Werkzeugwechsler: yes, Vertical drills-X: 11, Drill vertical Y: 7, Horizontal drills-X: 4, Aluminium sleeking table: yes, 2 station allocation: 2, Stops in the table front: 6 , Vacuum pumps m³/h: 120, Saw unit: yes, Edgebanding unit: no, Marking laser: Laserpositionerhilfe, Radial arm machine: yes, Foot mats: yes, Available: ca. 03/2017, Year :2000

Key data: 4175 mm, 1875 mm, 300 mm

Console table with LED suction cup position indicator, 8 manually movable brackets (length 1340mm) each with 3 vacuum cups, 6 support rails Workpiece clamping via vacuum pump 100/140m³/h LED system for vacuum clamps, Z-laser (ceiling laser) for contour display Working area X 4175 mm Working range Y up to 1875 mm (milling with 25mm drm), 1600mm all units Working range Z 300 mm Drill head MPU (with C-axis): 30 spindles: 20 of them vertical ; 10 horizontal drilling spindles, Groove saw max. 200mm drm Main spindle 15 kW, liquid-cooled, with vibration sensor and C-axis 360 grd. , Interface for Flex-5+ unit 18-fold tool changer (plate) at the bottom and 10-fold WZW at the top Adapter unit included: – Flex 5+ sawing, drilling, milling unit Control Power-Control PC 85 with Woodwop 5.0, also for AV station incl. cooling unit in SS Tool transfer station Some of the tools shown,  ...

Description: serial number: 0-201-06-0390 Technical specifications: 3 axes + axe 'C' vertical milling motor 7,5kW, HSK F63 drilling head with 11(X) + 6(Y) vertical spindles and 4 horizontal spindles (2 on X axis and 2 on Y axis) tools magazine HSK - 30 positions 8 bridges L=1340 mm, with 16 suction cups 4 pneumatical clamps for fixing narrow pieces 4 loading aids vacuum pump Becker 100 m³/h + vacuum pump 2BL2101 (80m³/h) working table: 4000 x 1300 mm axis travel: X=4900mm Y=1800mm Z=280mm waste disposal belt security belt in front of the machine (3 parts) perimetral protective fence total connection: 17 kW software: woodWOP NC control: power control PC85 CE mark without tools vacuum pump: 100 m³/h, serial number: 0-201-06-0390, toolchanger positions: 30, total electrical load: 17 kW, 5-axis machining: No, Number of vacuum pumps: 2 pieces, Integrated C-axis:  ...

Description: Powerful CNC machining centre equipped with: 2 pcs. main spindles, each with C-axis one of them with Flex-5 interface, 2 x 11 kW - HSK 63 drilling unit with 25 drilling spindles and groove saw 0/90° 2 pcs. 10-fold tool changers 2 console-tables for pedular processing and 4-fold processing max length of workpiece 3740 mm, while pedular processing 1830 mm, while 4-fold processing 700 mm max width of workpiece 1600 mm for processing with milling tool diameter of 25 mm, 1300 mm for all aggregates stop pin for workpieces with overhang of top layer LED positioning system vacuum loader Homag TBP 370 Traverse length approx. 13 metres Installation height from floor 1300 mm with 8 vacuum cups (130 mm and 100 mm diameter) new vacuum pumps in 2023 for further technical details please have a look at the pdf file (German language) working width y-axis: 1,600 mm, working l ...

Description: X-axis working surface: 4400 mm Y-axis working surface: 2100 mm vacuum pump automatic tool change motor power: 12 kW , control system: POWER PC CONTROL PC 85 x-motion: 4,400 mm, y-motion: 2,100 mm, control: POWER PC CONTROL PC 85, Approx. Onsite Dimension. (l x w x h): 6,200 x 2,400 x 1,000 mm, weight approx.: 4,300 kg

Description: - Workpiece length  , All units max. approx. 5200 mm  , Milling cutter 25 mm max. approx. 5375 mm - Workpiece width  , Rear stop for all units max. approx. 1400 mm  , Rear stop cutter 25 mm max. approx. 1550 mm  , Front stop for all units max. approx. 1150 mm  , Front stop milling cutter 25 mm max. approx. 1220 mm - Main spindle 18.5 KW with C-axis  , Speed 0 - 24000 rpm - 72-speed chain changer - Milling spindle 6 KW - LED console position indicator - Chip conveyor belt and articulated belt conveyor (Further tools and units for the tool changer are not included within delivery. Availability depends on the delivery of the new machine. A transport rack from HOMAG is required for transportation of the dismantled machine. This results in costs of EUR 6,500,-- (plus tax). After the transport rack has been returned to Helmut Meier (Germany Burgthann), ...

Aggregate for 4-Achs CNC to the extension for the 5-th axis

Edge gluing machine - see picture Next: Edge gluing machine NEY-SENIOR SKM 100/3 gemaess Pictures

Edge gluing machine - see picture Next: Edge gluing machine NEY-SENIOR SKM 100/3 gemaess Pictures

Board repair line with double end profiling line in top condition !! Workpiece parameters of the plates: Min.: 900 mm x 200 mm Weight min. : 17 mm Max .: 5000 mm x 1250 mm Max. Weight: 60 mm Weight: max. 150 kg < Accuracy: +/- 0.2 mm The portals have a max. Clock power of: max. 6 cycles / min The max. Partial performance: 18 parts / min (DEP line) Year of construction 2008 Condition: good (Original price of the line 2008 Euro 4.9 million) Consisting of: * Feeding station with feeding rollers, * Automatic vacuum lifting table for lengths up to 6 m * Conveyor systems * Repair line 1 * Turning station * Transfer service * Repair line 2 * automatic vacuum lifter for stacking (6m) * Stacking roller conveyor * Control cabinet with machine control * Profilfraessanlage * Stacking Tables; very well

4-side squaring and edge banding line Machine 1: Fixed side right, moving side left Rolling chain, feed 10 - 40 m/min Controlls NC 21 Panel thickness 8 - 60 mm Max. panel width 1500 mm Edges: coil 0,3 - 3 mm, strips 0,4 - 20 mm Entry fence for veneered panels Equipment: 1+1 Compact-twin hogger, 2 motors 6,6 kW 1+1 Compact hot melt unit A20 with panel edge pre-heating, glue roller Q34, twin coil magazine, lateral pressure rollers C including anti-stick application 1+1 Free space for solid wood edges up to 2,54 m length 1+1 Rough trimming, 2 x 1,5 kW 1+1 Fine- or radius trimming, 2 x 0,4 kW (edges up to 6 mm) 1+1 Universal shaper 8,1 kW 1+1 Universal shaper 8,1 kW 1+1 Edge sander KS 10 1+1 Disc sander DS 40 1+1 Disc sander DS 40 Angular transfer to the right, TWR 24/30/12/S Panel sizes: width 250 - 1200 mm, length 250 - 3000 mm, thickness 8 - 45 mm Machine 2 Machine II + infeed magazine TW ...

ID-Nr. 1-056-11-0400

Panel thickness: 12 - 60 mm Feed speed: 18 m/min Edge thickness: 0,3 - 3 mm for coil edges Equipment: Programmable fence at the infeed Squaring device: 2 x 3,0 KW Glue application unit: A34 double edge magazine for 2 coils Lateral pressure rollers, thickness programmable, 1 driven, 2 non-driven rollers End trims HL84/85, programmable change straight/chamfer, 2 motors 0,18 kW Rough trimming: 2 x 0,55 KW Contour trimming FK 13, 2 x 0,55 KW Profile scrapers PN10 Flat scrapers Buffing unit Controlls: HOMATIC NC21

Panel thickness: 12 - 60 mm Feed speed: 18 m/min Edge thickness: 0,3 - 3 mm for coil edges Equipment: Programmable fence at the infeed Squaring device: 2 x 3,0 KW Glue application unit: A34 double edge magazine for 2 coils Lateral pressure rollers, thickness programmable, 1 driven, 2 non-driven rollers End trims HL84/85, programmable change straight/chamfer, 2 motors 0,18 kW Rough trimming: 2 x 0,55 KW Contour trimming FK 13, 2 x 0,55 KW Profile scrapers PN10 Flat scrapers Buffing unit Controlls: HOMATIC NC21

Single sided postforming line, capable of doing L - and U profiles, with or without insert. Workpiece thickness: 16 to 60 mm. Min. workpiece width: 150 mm. Workpiece overhang: 70 mm. Max. laminate overhang: 105 mm. Feed speed 3 - 18 m/min. Fence side at the left Equipment: Squaring and shaping part: 1 x Postforming squaring unit, 2 motors each 1kW, 1st motor removing the laminate, 2nd motor trimming the overhaning laminate 1 x scoring, motor 1 kW, top position 1 x milling unit for the laminate when doing U profiles 1 x laminate support Postforming part 1 x blow cleaning nozzle 6 x glue nozzle for the glue application 2 x glue roller 9 x IR heating, each 2,2 kW 2 x Hot air blower, each 10 kW 1 x Basic postforming pressure zone for L-profiles, using rollers 1 x Basic postforming pressure zone for U-profiles, using rollers 1 x VF postforming pressure zone for special profiles, using pressur ...

Overview of the assembly: - Release agent spray unit top & bottom - Joining milling unit 2 x 4 kW - Glued part with workpiece preheating, 2 rolls, pressure zone C and QA34 application unit for PU with quick clamping system - autom. Adjustment pressure zone - Preparation for Lasertec activation unit - Hl84 cross-cut unit 0.8 KW - pneum. Adjustment pre-milling unit - Pre-milling unit Bf10 1.5 kW - Mould milling unit Fk11 Manual - Autom. Adjustment of chamfer to radius milling machines - Rolling side probe FK - Pneumatic adjustment FA11 for lateral displacement from the working area - Multi-drawing blade MN 21 autom. for a maximum of 5 different profiles. - Finishing unit (glue joint drawing blade and swabbing ridge) - Detergent spray unit top & bottom - powerControl PC22 Workpiece and edge parameters: - Workpiece width without edge min: - For workpiece thickness  ...

Overview of the assembly: - Release agent spray unit top & bottom - Joining milling unit 2 x 4 kW - Glued part with workpiece preheating, 2 rolls, pressure zone C and QA34 application unit for PU with quick clamping system - autom. Adjustment pressure zone - Preparation for Lasertec activation unit - Hl84 cross-cut unit 0.8 KW - pneum. Adjustment pre-milling unit - Pre-milling unit Bf10 1.5 kW - Mould milling unit Fk11 Manual - Autom. Adjustment of chamfer to radius milling machines - Rolling side probe FK - Pneumatic adjustment FA11 for lateral displacement from the working area - Multi-drawing blade MN 21 autom. for a maximum of 5 different profiles. - Finishing unit (glue joint drawing blade and swabbing ridge) - Detergent spray unit top & bottom - powerControl PC22 Workpiece and edge parameters: - Workpiece width without edge min: - For workpiece thickness  ...

Specifications Cutting length 3200 mm Cutting width (program slide travel) 2200 mm 3 air cushion tables 1835 x 645 mm Saw blade protrusion 62 mm Saw carriage feed: forward 6-32 m/min backwards constant 32 m/min Program slider speed: forward 12 m/min backwards 12 m/min Angle rearing device on one side (semi-automatic) min. pressure width 100 mm pressure width 1300 mm Main saw motor 5.5 kW Vorritzsägemotor 0,55 kW Stops swivel 5 pieces Coated front tables 1750 x 400 mm 1 piece (manual measuring stop/extendable) Coated front tables 1000 x 400 mm 2 pieces (fixed) Working height 900 mm Main saw blade 300 x 4.4 x 75 mm Scribbling saw blade 150 x 4.4 - 5.6 x 45 mm Compressed air 6 bar Operating voltage 380 V / 50 Hz Minimum suction speed at the suction nozzle approx. 25 m/sec Suction connection chip channel 1 piece 180 mm Suction connection pressure beam 1 piece 120  ...

Specifications Cutting length 3200 mm Cutting width (program slide travel) 2200 mm 3 air cushion tables 1835 x 645 mm Saw blade protrusion 62 mm Saw carriage feed: forward 6-32 m/min backwards constant 32 m/min Program slider speed: forward 12 m/min backwards 12 m/min Angle rearing device on one side (semi-automatic) min. pressure width 100 mm pressure width 1300 mm Main saw motor 5.5 kW Vorritzsägemotor 0,55 kW Stops swivel 5 pieces Coated front tables 1750 x 400 mm 1 piece (manual measuring stop/extendable) Coated front tables 1000 x 400 mm 2 pieces (fixed) Working height 900 mm Main saw blade 300 x 4.4 x 75 mm Scribbling saw blade 150 x 4.4 - 5.6 x 45 mm Compressed air 6 bar Operating voltage 380 V / 50 Hz Minimum suction speed at the suction nozzle approx. 25 m/sec Suction connection chip channel 1 piece 180 mm Suction connection pressure beam 1 piece 120  ...

Specifications Cutting length 3200 mm Cutting width (program slide travel) 2200 mm 3 air cushion tables 1835 x 645 mm Saw blade protrusion 62 mm Saw carriage feed: forward 6-32 m/min backwards constant 32 m/min Program slider speed: forward 12 m/min backwards 12 m/min Angle rearing device on one side (semi-automatic) min. pressure width 100 mm pressure width 1300 mm Main saw motor 5.5 kW Vorritzsägemotor 0,55 kW Stops swivel 5 pieces Coated front tables 1750 x 400 mm 1 piece (manual measuring stop/extendable) Coated front tables 1000 x 400 mm 2 pieces (fixed) Working height 900 mm Main saw blade 300 x 4.4 x 75 mm Scribbling saw blade 150 x 4.4 - 5.6 x 45 mm Compressed air 6 bar Operating voltage 380 V / 50 Hz Minimum suction speed at the suction nozzle approx. 25 m/sec Suction connection chip channel 1 piece 180 mm Suction connection pressure beam 1 piece 120  ...

Specifications Cutting length 3200 mm Cutting width (program slide travel) 2200 mm 3 air cushion tables 1835 x 645 mm Saw blade protrusion 62 mm Saw carriage feed: forward 6-32 m/min backwards constant 32 m/min Program slider speed: forward 12 m/min backwards 12 m/min Angle rearing device on one side (semi-automatic) min. pressure width 100 mm pressure width 1300 mm Main saw motor 5.5 kW Vorritzsägemotor 0,55 kW Stops swivel 5 pieces Coated front tables 1750 x 400 mm 1 piece (manual measuring stop/extendable) Coated front tables 1000 x 400 mm 2 pieces (fixed) Working height 900 mm Main saw blade 300 x 4.4 x 75 mm Scribbling saw blade 150 x 4.4 - 5.6 x 45 mm Compressed air 6 bar Operating voltage 380 V / 50 Hz Minimum suction speed at the suction nozzle approx. 25 m/sec Suction connection chip channel 1 piece 180 mm Suction connection pressure beam 1 piece 120  ...

Specifications Cutting length 3200 mm Cutting width (program slide travel) 2200 mm 3 air cushion tables 1835 x 645 mm Saw blade protrusion 62 mm Saw carriage feed: forward 6-32 m/min backwards constant 32 m/min Program slider speed: forward 12 m/min backwards 12 m/min Angle rearing device on one side (semi-automatic) min. pressure width 100 mm pressure width 1300 mm Main saw motor 5.5 kW Vorritzsägemotor 0,55 kW Stops swivel 5 pieces Coated front tables 1750 x 400 mm 1 piece (manual measuring stop/extendable) Coated front tables 1000 x 400 mm 2 pieces (fixed) Working height 900 mm Main saw blade 300 x 4.4 x 75 mm Scribbling saw blade 150 x 4.4 - 5.6 x 45 mm Compressed air 6 bar Operating voltage 380 V / 50 Hz Minimum suction speed at the suction nozzle approx. 25 m/sec Suction connection chip channel 1 piece 180 mm Suction connection pressure beam 1 piece 120  ...