8 HAAS cnc turning machines used machines

Used industrial machine offered by IBEXTRA.

Inv. Num. : 8856 Type: SL-10 THE Producer: HAAS Created: 2006 Parameters: Switch-on hours: 23550 h Hours: 13463 h Maximum turning length: 355 mm Maximum turning diameter: 279 mm Maximum turning diameter over bed: 252 mm Maximum turning diameter over support: 203 mm Maximum length of travel in the X-axis: 159 mm Max. travel length of the Z-axis: 356 mm Maximum spindle speed: 6000 1/min Weight: 2500 kg Equipment: Collet chuck Universal chuck

The machine is in very good technical condition, testing is possible by prior arrangement.

The machine is in good technical condition, testing is possible by prior arrangement.

Key data: 406 mm, 584 mm

Inv. Num. : 9153 Type: DS-30SSY Producer: HAAS Created: 2015 Parameters: Hours: 3002 h Maximum turning length: 584.2 mm Maximum turning diameter: 406.4 mm Maximum turning diameter over bed: 807.7 mm X-axis travel: 317.5 mm Y-axis travel: 50.6 mm Travel Z-axis: 584 mm Maximum main spindle power: 14 kVA Maximum spindle speed: 4800 1/min Number of all tools: 24 pieces Spindle bore: 88.9 mm Weight: 7259 kg Equipment: Chip conveyor Pick-up spindle C-axis Bar Feeder Tool Alignment System System for removing parts after cutting Driven Axial Holder ER32 (Heimatec) Driven radial bracket ER32 (Heimatec) Holders for rotary tools, other holders and jaws

Key data: 298 mm, 572 mm, 4000 1/min

Inv. Num. : 9320 Type: ST 20Y Producer: HAAS Created: 2022 Parameters: Switch-on hours: 1565 h Operating hours: 236 h Max. turning length: 572 mm Maximum turning diameter: 298 mm Grinding diameter: 533 mm Maximum length of travel in the X-axis: 213 mm Maximum length of travel in the Y-axis: 51 mm Maximum feed in the Z-axis: 572 mm Maximum spindle speed: 4000 1/min Maximum main spindle power: 14.9 kW Max. rod diameter: 64 mm Lathe chuck diameter: 210 mm Spindle bore: 88.9 mm Weight: 4754 kg

turning diameter: 432 mm turning length: 864 mm control: HAAS bar diameter: 76 mm 3-jaw-chuck diameter: 254 mm travel -z axis: 864 mm travel -x axis: 287 mm spindle speed:: 3400 1/min spindle bore: 88 mm swing over bed: 762 mm swing diameter over bed slide: 432 mm turret head: 12 Pos. VDI 40 tailstock travel: mm rapid traverse X-axis: m/min rapid traverse Z-axis: m/min drive capacity - spindle motor: 22 kW voltage: 400 V total power requirement: kW weight of the machine ca.: 7.250 t dimensions of the machine ca.: 3,90 x 2,00 x 1,90 m coolant: chip conveyor: - serial-no.: 3082298 - Machine Run Time: ---- h - control: HAAS - tool measuring arm - chip conveyor - collant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We are selling a Haas ST-20 turning center on behalf of a customer. The machine was installed and never put into production., - Control Options, - Options package, - High-pressure coolant flow, - Accessory package

HAAS DS-30 CNC lathe was built in 2013 in the United States by HAAS AUTOMATION, INC. The machine, designed for machining workpieces with a maximum diameter of 457 mm, offers excellent efficiency, reliability and precision. Inside a large workspace there are two spindles with a C-axis, which enable the machining of both sides of a workpiece in a single work cycle. The tool head, in turn, allows for the attachment of both fixed and driven tools. This solution increases the flexibility of the machine by enabling it to be adapted to specific production needs. All this is complemented by advanced CNC control with many useful functions. The HAAS DS30 CNC turning center weighs 7221 kg. Technical specifications of the HAAS DS-30 metal lathe - maximum turning diameter: 457 mm - maximum turning length: 660 mm - swing over bed: 806 mm - swing over cross slide: 527 mm - feed in the X/Z axis: ...

HAAS ST-15 CNC lathe was built in 2020 in the United States by HAAS AUTOMATION, INC. This highly efficient machine with a compact design is an excellent choice for both unit and series production. Workpieces with a maximum length of 406 mm are machined inside a large workspace by means of a high-speed spindle and precision cutting tools, taken from a 12-position turret. All this is complemented by intelligent CNC control, in which advanced machining programmes are created in just a few steps. The HAAS ST15 CNC turning center weighs 3584 kg. Technical specifications of the HAAS ST-15 metal lathe - CNC controller: HAAS - swing over over bed: 419 mm - bar diameter: 64 mm - maximum turning length: 406 mm - feed in the X/Z axis: 200/406 mm - rapid traverse in the X,Z axis: 30.5 m/min - thrust force in the X,Z axis: 14679 N - maximum spindle rotational speed: 4000 rpm - maximum spi ...

HAAS ST-20Y CNC lathe was built in 2022 in the United States by Haas Automation Inc. The machine has only worked for 119 hours to date and is like brand new. The HAAS ST-20Y is an excellent choice for the modern business. This is because it makes it possible to perform versatile 4-axis machining of the highest quality on any workpiece. All machining processes, i.e. milling, threading and drilling are performed by means of driven tools and a spindle with synchronised C axis. The 12-position BMT turret offers high productivity thanks to the larger contact area between tooling, toolholder and the turret itself. The operator, on the other hand, has at their disposal an advanced HAAS CNC control with a Visual Programming System (VPS), which significantly improves the daily operation of the machine. The VPS uses graphical templates to facilitate the creation of G-codes for even the most  ...

HAAS ST-30 CNC turning center was built in 2013 in the United States by HAAS AUTOMATION, INC. The machine, distinguished by its high reliability and precision, is perfect for both unit and series production. It is capable of performing a number of complex operations, such as precision turning or threading of workpieces. All these machining processes are performed inside a large, fully illuminated work area by means of a powerful spindle and cutting tools. The spindle, driven by a high-powered motor, rotates at a maximum speed of 2400 rpm and moves in two X,Z axes with feeds of 457 mm and 584 mm respectively. To guarantee maximum machining precision, each tool taken from the 12-position turret is continuously measured and calibrated by a measuring probe. The hydraulic tailstock, in turn, ensures precise positioning and support of the workpiece during the work cycle. The HAAS ST-30 feat ...

Turning diameter: 430mm, max. swing diameter over bed: 760mm, max. turning length: 860mm, center distance: 990mm, travel X/Y: 280mm/860mm, speed: 3400rpm, chuck diameter: 12inch, tool stations: 12. Machine dimensions X/Y/Z: approx. 3800mm/2000mm/1900mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible.

200MM" 3 JAW CHUCK FITTED WITH REVERSIBLE JAWS Spindle bore 59mm The Haas control is simple to use and incorporates on screen toolpath verification, The control interfaces well with CAD-CAM ,we will help with setup if required.

This lathe machine was manufactured in 2015. Equipped with a D160 Hydraulic chuck and a D45mm main spindle bore, it boasts reliability and precision. Featuring a 12-piece turret head, VDI-40, and hydraulic programmable tailstock, it ensures versatile machining operations. With 42597 hours of power on and immediate availability, this HAAS ST-10 presents an opportunity for efficient production. For further details, contact us.

This HAAS SL-30HE was manufactured in 2007. A robust horizontal turning machine featuring a turning diameter over bed of 762mm and a length of 860mm. It includes a VDI tool turret with 12 positions and a chip conveyor. Ideal for precise and efficient turning operations. Contact us for more information about this machine.

This HAAS ST-40 was manufactured in 2018. It features a 15-inch chuck, a maximum part swing of 35.5 inches, and a cutting diameter of 30 inches. The machine includes a 2-speed gearbox spindle, capable of 2,400 rpm, and a 12-station BOT turret. Additional equipment includes a belt-type chip conveyor and a programmable servo tailstock. Consider the opportunity to buy this HAAS ST-40 horizontal turning machine. Contact us for more information about this machine.

This HAAS SL-30TBHE was manufactured in 2008. A robust horizontal turning machine featuring a spindle speed of 3400 1/MIN, 22 kW motor power, and a swing over bed of 762 mm. It includes a 12-position turret, hydraulic tailstock, and both 3 jaw and collet chucks. Dimensions are 3900x2000x1900 mm. Consider the opportunity to buy this HAAS SL-30TBHE horizontal turning machine. Contact us for more information.

This 3-axis HAAS ST-20Y was manufactured in 2014. It features a CNC lathe with C and Y-axis capabilities, a spindle speed of 4000 rpm, and a chuck size of 8 inches. Additional features include a 12-station turret, chip conveyor, and a programmable hydraulic tailstock. Ideal for precision turning operations. If you are looking to get high-quality turning capabilities consider the HAAS ST-20Y machine we have for sale. Contact us for more information about this machine.

This HAAS ST-20 was manufactured in 2019. A robust horizontal turning machine featuring a 210mm hydraulically actuated chuck, a VDI turret with 12 tool stations, and a spindle speed of 4,000 rpm. It supports a maximum load of 330 x 572 mm and bar diameters up to 64 mm. Ideal for precision turning operations. Contact us for more information about this machine.

Horizontal turning machine manufactured in 2001. This HAAS SL-30THE was designed for precision with a spindle speed of 3,000 RPM and a claw chuck diameter of 254 mm. With an X-axis travel of 287 mm and a Z-axis travel of 864 mm, it offers reliable performance for turning applications. Consider the opportunity to buy this HAAS SL-30THE horizontal turning machine. Contact us for further details.

This 4-axis HAAS ST-30Y horizontal turning machine was manufactured in 2020. It features C+Y-axis capability, a 3,400 rpm A2-6 spindle, and a 12-station BMT65 turret. The machine is equipped with an automatic tool presetter, bent-type chip conveyor, and programmable tailstock. The machine can be inspected under power and test cuts are possible upon request. Contact us for further details.

Horizontal turning machine manufactured in 2023. This HAAS ST-15 features a maximum spindle speed of 4000 RPM and includes a 12-station bolt-on turret. It comes equipped with a Haas Bar Feeder and a hinged belt chip conveyor for efficient operation. If you are looking to get high-quality turning capabilities, consider the HAAS ST-15 machine we have for sale. Contact us for further details regarding this machine.

This 4-axis HAAS DS-30SSY was manufactured in 2013. It features Y-axis milling capability, a sub-spindle, and live tooling, enhancing its versatility for various machining tasks. The machine includes a 12-station bolt-on turret and comes equipped with a chip conveyor and mist collector. If you are looking to get high-quality turning capabilities, consider the HAAS DS-30SSY horizontal turning machine we have for sale. Contact us for further details.

This 3-axis HAAS SL-30 was manufactured in 2001. A robust horizontal turning machine featuring a 3400 rpm spindle, Ø76mm bore, and a 10 chuck. It includes a tailstock, 12 x VDI40 tool stations, a toolsetter, and a conveyor. If you are looking to get high-quality turning capabilities consider the HAAS SL-30 machine we have for sale. Contact us for more information.