150 GILDEMEISTER used machine for sale

turning diameter:570 mm turning length:635 mm travel -x axis:220 mm travel -z axis:635 mm Torque:240 Nm feed::X: 20m/min; T: 24m/min disc turret:12 fach main spindle speeds::25-25.000 dimensions of the machine ca.:3210 x 1750 x 1750 mm weight of the machine ca.:5.300 t

turning diameter:500 mm turning diameter over bed:500 mm turning dia. over base-slide:290 mm centre distance:1000 mm centre height:250 mm z-travel:1350 mm speeds:10 - 3000 U/min

turning diameter:500 mm turning length:1000 mm control:MANUAL PLUS Grundig total power requirement:24 kVA weight of the machine ca.:2650 kg dimensions of the machine ca.:2500 x 1750 x 1850 mm swing diameter over face slide:290 mm chuck:Ø max. 260 mm cross movement:260 mm spindle head:DIN 55027 Größe 8 spindle bore diameter:70 mm rapid travel - longitudinal/face:8 /6 m/min spindle speeds::8 - 2800 tailstock travel:180 mm tailstock quill taper MT:5 Documents:vorhanden

turning diameter:500 mm turning length:1000 mm control:MANUAL PLUS Grundig total power requirement:24 kVA weight of the machine ca.:2650 kg dimensions of the machine ca.:2500 x 1750 x 1850 mm swing diameter over face slide:290 mm chuck:Ø max. 260 mm cross movement:260 mm spindle head:DIN 55027 Größe 8 spindle bore diameter:70 mm rapid travel - longitudinal/face:8 /6 m/min spindle speeds::8 - 2800 tailstock travel:180 mm tailstock quill taper MT:5

turning diameter:120 mm turning length:650 mm weight of the machine ca.:11 t dimensions of the machine ca.:5,032 x 3,048 x 2,445 m Gildemeister MF Twin 65-II lathe with loading automation. This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts.

turning diameter:120 mm turning length:650 mm weight of the machine ca.:11 t dimensions of the machine ca.:5,032 x 3,048 x 2,445 m max. swing diameter:250 mm Gildemeister MF Twin 65-II lathe with loading automation. This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts.

turning diameter:640 / 400 mm turning length:1500 mm control:Siemens 840 D Powerline Travel turret No.1 (milling spindle) x/y/z:550 / 180 (±90) / 1585 mm Swivle angle milling spindle (B-axis):±120° interpol. ° Rapid traverse feeds turret 1 (milling head) x/y/z:40/24/60 m/min RPM milling spindle:12000 1/min power capacity - milling spindle:12 / 23 kW Torque of milling spindle:100 Nm Tool magazine for milling spindle (turret 1):120 HSK-A 63 Tool change time tool/tool, milling spindle:1,6 s Spindle 1 RPM:4000 1/min Spindle 1 power:36/ 45 kW Spindle 1 Torque:730 Nm Spindle 1 max. bar diameter:90 Spindle 2 RPM:4000 1/min Spindle 2 power:36 / 45 kW Spindle 2 torque:730 Nm Spindle 2 max. bar diameter:90 c-axis:0,001 ° Travel turret 2 x:225 mm Travel Turret 2 z:1595 mm RPM of rotary tools turret 2:4000 1/min no. of tools in turret 2:12 VDI 40 high-pressure pump:20 bar total power requiremen ...

turning diameter:160 mm turning length:300 mm control:Siemens 840D Spindle 1 Power:22 kW Spindle 1 RPM:5000 1/min Spindle 1 max. bar diameter:65 Spindle 1 Torque:150 Nm Spindle 2 power:16,8 kW Spindle 2 RPM:5000 1/min Spindle 2 torque:100 Nm Travel for pick up of 2nd Spindle:W2=690 mm dimensions of the machine ca.:´4,5x2,0x2,3 m weight of the machine ca.:9 t CNC turning center with 3 turrets with rotary tool drives and 2 spindles. There is an internal coolant system for the turrets with individual pumps

A Gildemeister CNC lathe is available. Tool stations: 8, max. turning diameter: 350mm, max. swing diameter over bed/cross slide: 400mm/270mm, max. turning length: 650mm, travel X/Z: 220mm/700mm, rapid traverse: 15m/min, chuck diameter: 200mm. Machine dimensions X/Y/Z: approx. 2100mm/1750mm/1750mm, weight: approx. 2800kg, control: Fanuc 10i, automatic operating hours: approx. 462h. Documentation available. An on-site inspection is possible.

turning diameter: 680 mm turning length: 600-635 mm control: Siemens total power requirement: kW weight of the machine ca.: 6500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gildemeister Twin 65 Y - RG2Year of manuf. : 2007 Control : Siemens 840 D Turning diam. : 250 mmTurning length : 650 mm____________Description:In General:Year of construction:2007Control:Siemens 840 DBar capacity:65 mmTurning diameter:350 mmTurning length:650 mmMain spindle:Technology:Motor spindleSpeed:5,000 rpmPower max.:35 kWTorque max.:370 NmC-axis:0.001Bar capacity:65 mmChuck:Hainbuch Spanntop size 65Clamping cylinder:Hollow clamping cylinderSub spindle:Technology:Motor spindleSpeed:5,000 rpmPower:26 kWTorque:290 NmC-axis:0.001Chuck:Hainbuch Spanntop size 65Clamping cylinder:Partial hollow clamping cylinderZ-axis:670 mmX-axis:175 mmTool carrier i (X/Y/Z):Technology:Tool turret, 12 stationsTool holder:VDI 30Tool drive:4,000 rpm, 11 kW, 28 NmX-axis:300Y-axis:80 mm ( +/- 40 mm)Z-axis:650 mmTool carrier II (X/Z):Technology:Tool turret, 12 stationsTool holder:VDI 30Tool drive:4,000 ...

3 slides 3 revolvers with 12 positions each driven main and subspindle 2 C-axis Y axis, workpiece unloading device, high pressure coolant system with paper filter chip conveyor, Control: Siemens 840D, Country of origin: Italy, Operating hours: 28.900, Number of spindles: 2, Number of linear axis + C axis: 8+2, Max bar diameter [mm]: 65, Spindle speed [rpm]: 5.000, Spindle motor [kW]: 20, Auto bar loader: Iemca Master 880 P/R, Machine weight approx. [kg]: 9.000

Swing diameter over bed/cross slide: 320mm/150mm, center height: 160mm, distance between centers: 750mm, max. turning length: 740mm, travel X/Z: 185mm/700mm, chuck diameter: 200mm, speed: 4000rpm, rapid traverse X/Z: 5m/10m/min, tool stations: 8, tailstock quill stroke: 120mm, tailstock quill diameter: 60mm, machine dimensions X/Y/Z: approx. 2300mm/1500mm/1700mm, weight: approx. 2000kg, control: Heidenhain. Documentation available. An on-site inspection is possible.

turning diameter: 500 mm turning length: 1000 mm control: Heidenhain total power requirement: kW weight of the machine ca.: 3200 kg t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 16 mm spindle passage: 16 mm turning length: 160 mm control: GE FANUC Series 18 i-T spindle turning speed range: 8000 U/min rapid traverse: 30 m/min total power requirement: 2,2 kW weight of the machine ca.: 2,1 t Accessories: bar loader IEMCA, GENIUS 226-32 L, YOM 2002 (for bar dia. 2 - 26 mm and bar lengths 1500 - 3210 mm), chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter max. over bed cover: 570 mm swing diameter over face slide: 420 mm control: Heidenhain CNC PILOT longitudinal stroke: 635 mm face stroke: 220 spindle bore: 79 mm centre distance: 1000 mm chucking diameter: 250 mm tailstock taper MT: 4 feed speed longitudal: 0,025-24.000 mm/min. feed speed face: 0,025-20.000 mm/min. power feed longitudinal: 7.000 N Feed Force Face: 3.500 N total power requirement: 44 weight of the machine ca.: 5,7 t dimensions of the machine ca.: 7,5 x 4,0 x 1,7 m Accessories: - 3 clamping jaws - various tool holders The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Horizontal turning machine manufactured in 1991. This Gildemeister CTX 400 features a reliable EPL 2 control system, ensuring efficient operation. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 400 machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 1993. This Gildemeister CTX 400 is in good condition and fully functional, featuring EPL 2 control. It comes with an extraction hose/pipe connected to the side enclosure. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 400 machine we have for sale. Contact us for further details.

Fresh oil lubrication capacity: approx. 3l, voltage: 400V, frequency: 50Hz, fuse protection (slow-blow) according to VDE 0100: 80A, permissible voltage fluctuation at 400V: ±10%, connected load: 44kVA, length: 3210mm, width: 1750mm, height: 1750mm, weight: approx. 4.6t, with chip conveyor. An on-site inspection is possible.

Manufacturer: Gildemeister Model: GMX 400 linear Year of Manufacture: 2007 Total Power Requirement: 100 kVA Voltage: 400 V Machine Weight: 24,000 kg Floor Space Required: 60 m2 Working Range - Centre height: 1,343 mm - Maximum turning diameter: 640 mm - Maximum turning length: 1,930 mm - Maximum turning length over bed: 550 / 180 mm - Slide travel longitudinal X1, X2: 1,585 / 1,400 / 1,500 mm - Slide travel vertical Y: plus/minus 110 mm - B-axis: plus/minus 120 degrees - Maximum circumference: 640 mm - Length of workpiece in crown area: not specified - Maximum workpiece weight: not specified Spindle Specifications - Spindle head flat flange DIN: Flachflansch - Spindle nose diameter front bearing: 220h5 mm - Spindle bore diameter: 107 mm - Spindle nose diameter: 150 mm - Max. chuck bore diameter in front bearing: 250 / 315 / 400 mm (internal taper) - Spindle speed HSP: 3,200 / 4 ...

CNC lathe with driven tools, year 2010, CNC 840D ShopTurn. Used machine in good condition. More info & price on IndustrialBuyer.

Gildemeister G20, 6-Spindel-Portal-Drehautomat, GILDEMEISTER 20, Maschine komplett überholt, Elektrik - neu, PLC – neu, Mechanik - generalüberholt -, Geometrieprotokoll – wie Neumaschine –, CE – Konformitätserklärung, einschl. elektrische Standardausrüstung, Grundausstattung der Maschine:, 1 Tippbetrieb zum Einrichten, 1 automatische Zentralschmiereinrichtung, 1 Kühlmitteleinrichtung einschl. Pumpe und Antrieb, Behältervolumen ca. 650 L, 1 Werkzeugspindelführungsblock, 1 Antriebsgruppe für rotierende Werkzeugspindeln einschl. Gewindeschneidgetriebe für jede Werkzeugspindelposition wahlweise:, - a) Gegenläufig zum Schnellbohren, - b) Synchronlaufend, - c) Zum Gewindeschneiden bzw. Reiben, 2 Planschlitten mit unabhängigen Planvorschub, 4 Kreuzschlitten mit unabhängigem Plan- und, (Längsvorschub als Option) + 1 Maschinen-, leuchte, 1 Paar Wechselräder für Spindeldreh ...