FEDEGARI fo used machines

* General * SKU240N190 * MakeFedegari * TypeFOAF3 SP. * No.NA0471EE * LocationBarneveld * Pressure * Working pressure3 Bar * Main Features * MaterialStainless steel * Volume1750 Ltr. * Pressure3 Bar * Specified Features - Autoclave * Horizontal autoclavecheck * Capacity1750 Ltr * Internal width0,8 M * Internal depth2,65 M * Internal height0,8 M * Inlet/Outlet800x800mm / 800x800mm * With trayscheck * Tray sizes240x200mm * Max. temperature140 °C * With jacketcheck * Insulatedcheck * With pumpcheck * Motor4,0 KW, 400/690 Volt * With transport trolley12x * MaterialStainless steel * Information * With switchgearcheck * Floorspace2,4x6,0 M * Total height2,3 M * Weight3250 KGAutoclavesFedegariAutoclaves > AutoclavesBrand > Fedegari What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You a ...

Hot air sterilization for dry heat sterilization and depyrogenation. Autoclave with single-leaf door on both sides. Operating temperature: 160/250°. Chamber size: 1000 x 1450 x 1450 mm (depth).

Steam air sterilizer for the counterpressure sterilization of aqueous solutions in sealed containers. Pass-through autoclave with semi-automatic doors on two fronts. Hydraulic system made entirely of stainless steel. Capacity: 1470 litres. Operating temperature: 138.9°. Chamber size: 800 x 800 x 1250 mm (depth).

FOD ovens, such as autoclaves, run batch processes and are the ideal solution for the sterilization of all those production lines in which the variability of products, batches and formats do not allow the use of continuous sterilizers such as tunnels. FOD ovens main advantage lies on its particle contamination class assurance. Fedegari guarantees the contamination level to remain under the established standards values for 100 class. This accuracy is verified also during the most critical phases such as heating and cooling, when the thermal expansion of the filters may release a great amount of particles. Particulate contamination control originates from complex fluid dynamic studies and a close collaboration with Camfil, the world’s most respected filter manufacturer, with whom Fedegari works at the development of high-temperature filters. DESIGN & TECHNICAL FEATURES • Sterilizing c ...

New Unused 2016 FEDEGARI XFSW7 Eco-Steam Washer This listing is for one of two brand new 2016 FEDEGARI XFSW7 Eco-Steam Washers complete with trolleys, controls and documentation. A high-end two door GMP washing solution, the XFSW7 (part of FEDEGARI’s FSW range) combines impeccable cleaning results with impressively low operational costs over conventional hot-water systems. This offering represents a unique opportunity for investment in a best-in-class machine, unused and in the original packing, at a fraction of the original retail price. Applications include uses in the food, bio-pharmaceutical, laboratory and cosmetic sectors with suggested loads including machine parts, tools and glassware. Key Information Unit Dimensions (LxWxH): 2300x1690x3000mm Dimensions of Inlet: 1200x1200mm Chamber Depth: 1200mm Door Type: Vertical Sliding Doors Voltage: 400v Three Phas ...

Specifications: Indicative thermal dissipation, doors closed: side 1 - 0.9 kW, side 2 - 0.9 kA, Maximum operating pressure: 3 bar g Approximate weight of empty autoclave 5000 kg Power supply 400 V 50 Hz, 19 kW Pressure (bar g) Flow rate size P1 water recovery from chiller 1,5 120 l/min 34.8x1.65 P1 water from chiller for exchanger 2 120 l/min 34.8x1.65 G water for empty pump 2 20 l/min 15.75x1.65 E1 industrial steam for gap 3 250 kg/h 22.1x1,65 E1 saturated steam ( 95-97%) 3,5 800 kg/h 47.5x1,65 D1 oiled compressed area for tools 5,5 100 NL/min 9.4x1.65 D oiled compressed area for chamber3,5 300 NL/min 34.8x1.65 A general discharge 72.9x165 FIELDS OF APPLICATION The FOA air-steam mixture sterilizer is suitable for: - Sterilization of parenteral solutions, liquids in closed non-deformable containers (e.g., glass tubes) and liquids in closed deformable containers (e.g., ...

FOD ovens main advantage lies on its particle contamination class assurance. Fedegari guarantees the contamination level to remain under the established standards values for 100 class. This accuracy is verified also during the most critical phases such as heating and cooling, when the thermal expansion of the filters may release a great amount of particles. Particulate contamination control originates from complex fluid dynamic studies and a close collaboration with Camfil, the world's most respected filter manufacturer, with whom Fedegari works at the development of high-temperature filters. FOD ovens, such as autoclaves, run batch processes and are the ideal solution for the sterilization of all those production lines in which the variability of products, batches and formats do not allow the use of continuous sterilizers such as tunnels. • Single-leaf flush door on both sides ...

The SteriWasher is an innovative new robust, high-performance, validateable part washing system designed for use in pharmaceuticals, biotechnology, food, beverages, healthcare and other critical areas. The washroom is accessible via a robust wing door and is made of 316 stainless steel. It is hygienically constructed. By using a combination of specially developed spraying technologies with variable performance, the washing machine offers energy-rich washing along with an energy-saving rinse, which is selected by a simple recipe selection. Description The SteriWasher ™ parts washers use existing and new technologies to provide an environmentally friendly washing system with low water and energy consumption in production and research environments for equipment ranging from critical small parts and tools to large mixers, barrels and containers. The range is available with a range of c ...

Forklift forks, forks, forklift tines with anti-slip coatingLoad capacity: approx. 2.5 ton. Tine length: 1600 mm Tine width: 100 mm Tine thickness: 50 mm (40 mm metal + 10 mm rubber coating coating)Fork carriage height: 405 mm - suitable for tine holder: FEM 2 Form B rubber coating as anti-slip coating and for protecting transport goods? Rocker arm lockWeight: 145 kgas good as new, unusedFor a 2.5 ton. Forklift.; used

1. BUILT: 1995, MIDI, STRIP WIDTH: 800 MM, THICKNESS: 0.006-0.020 MM; 2. VEB, BUILT: 1972, FOIL WIDTH: 670 MM, THICKNESS: 0.007 - 0,014 MM

THICKNESS: 0.014 - 0.030 mm, DOUBLED FOIL THICKNESS: 0.028-0.060 MM;

calender for PCV foil

1st unit : M7/46 – 2 buckles 2nd unit : M7/46 – 2 buckles SBAP 46-ME-52 delivery

Horizon AFC 746 D - cross folder 16 pages year 2019 Counter 73 million good condition in production available immediately

MF-25 Corner Forming Machine

Antriebswalze 1 Stück / roller 1 piece Eurofold / Foldmaster Manufacturer Number: 235.100.321 Drive roller We offer different versions of rollers for Eurofold 235 / 435 / Foldmaster 200 folding machines Preis ist für eine Walze / Price is for one roller Art.: PS2811 depending on the one we have in the warehouse at the moment. They can be rollers with rubber rings or fully rubberized rollers. Fully rubberized rollers provide good adhesion to the paper and thus better paper transport. After your inquiry we will give you further information. Possible spare part number: 235.100.321 - Drive roller 235.000.889 235.000.888 435.100.001 235.000.887 For FoldMaster, ET numbers: 235.000.523 235.000.524 235.000.522 435.000.109

Komatsu Forwarder 845 motor A G C O power 49 AWF - only 2000 hours engine contaminated ( presumably a wrong liquid was poured in when the machine was out in the forest ) Price from Leende - Ned. € 3.000,=

working width 230mm working height 120mm 5 heads Head arrangement: lower/right/left/upper/lower spindle diameter 40mm smooth feed speed control Feed on cardan shafts pneumatic pulling roller clamps worktop lubrication system

Folding Machine Nail Foldnak 8 Art.Nr. L981

2014 Conical dewatering press S15-E-EVA-7,5 food grade model. Completely revised. History and documentation available. Elektromotor capacity: 7,5kW.

Hakro hot foil installation on K offset cilinder from 1960. Electronically upgraded for higher production quality. More details on request.

Size: 520 mm Equipments: 4 Folding units for Heidelberg Stahlfolder TI 52 1st Unit 1x 1.ST Nr. 1 gate fold 1x 1.ST Nr. 2 gate fold 1x 1.ST Nr. 3 gate fold 1x 1.ST Nr. 4 gate fold

Pile feeder - separating head 2 buckles 1 knife Noise hood Batch counter LCD touch-screen control Belt delivery Sheet size : 490x650 mm - min. 120x172 mm (only Parallel fold) - min. 105x172 mm (with special equipment) - min. 174x174 mm (with cross fold) Fold length: min. 58 mm Paper weight : 40-250g/sqm Pile height : 590 mm Speed : 180 m/min

Folienschneider / Foil Cutter BAIER FOLSCH Baujahr / Year 1966 - Serial-No. 66236

WITH TRIMMER p/n: 2654000N SN: 060900759 Format: up to SRA