used ESAB numorex

CNC flame cutting machine make ESAB type Numorex NXB 6500Machine -No: 89022, built in 1989Track width: 6500 mmTrack length: 12000 mmCutting table height: 700 mmNumber of burners: 6 oxy-fuelType of control: CNC 510With- Extraction systemused, from large company, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Plasma Cutting/Oxyfuel ESAB Numorex for sale Technical data: - Plasma source: 240/360 A - Bevel plasma torch for chamfer cutting - Vibrating suction bench for evacuating pieces - Smoke extraction system.

Description: Serial number: 20904600, 3 x 400 V, 16KVA, 50 Hz, Portal with Vision T5 control unit, endless bevel unit, incl. 2nd bevel unit to change (replacement), Kjellberg HiFocus 360i power source incl. cooling, incl. description, operating instructions and programming description, ATTENTION! not included in the scope of delivery: table with suction unit, running rails with racks NOTICE: ,It is possible to purchase wear parts for the plasma cutting system separately. Location: A-5500 Bischofshofen Collection: by appointment - ,Machine is already in dismantled condition for transportation!  , Information for organizing the truck: Dimensions: Portal LxWxH approx. 6000 x 3000 x 2700 mm + approx. 6 pallets Total: approx. 5000 kg These dimensions require an expandable tarpaulin semitrailer truck for transportation (Attention truck must be expandable to 3000 mm width !!) Ap ...

Technical data: Max height of welding 4,000 mm Max Schweissllänge 4,000 mm with ESAB A6 control

Technical data: 1 drive unit / 1 revolving unit maximum load 20 to. Roll diameter 470 mm Roll width 250 mm Drive unit dimensions 2800 x 1300 x 1600 mm Unit 2800 x 1100 x 1600 mm, running with dimensions

Machine type: ESAB SXE-P-5000 NC/-CNC type: CNC version 52 Year of construction: 1995/Refurbishment and conversion 2009 track width: 5,000 mm track length: 34 000 mm cutting range: width 4 000 mm Laenge 18,000 mm runway height 700 mm table height 700 mm Head: 2 head 1: Cutting head head 2: marking unit water basin: 3 sinks sinkable to cut underwater. Power sources: 2 connected in parallel 400 A cutting is possible in the VA range up to 100 mm cutting cutter, soft fillers up to max. 50 mm. The plant is in operation. Complete data about the retrofit on request ; ready for immediate use

Burner types: PT - 600 and PT - 15 XLS plasma power source: ESP 200; 100-160 volts; 40-200 A cutting method underwater Plasma cutting cutting table L:6,7xB:1,63xH0,79m Trafo ESAB ESP200 L:1,05xB:0,55xH:1.1m/330kg Portal; Rails x-way 7500 mm y-path 2700 mm Welding speed 2-750 IPM m/min Control CNC Vision 1000 cutting width y=max. 2438 mm thickness unleg. Steel=50.8 mm thickness of alloyed steel=38 mm thickness Alu=32mmmm burner cod1 piece Adjustment burner=approx. 150mmmm Total power requirement 39.8 kVA machine weight approx. 4.0; ready for immediate use

CNC plasma cutting system Esab Pegasus Working area: 4x2m Esab Precision Plasma 100A, with PT24 burner automatic gas mixing console (+1 complete, new gas mixing console as replacement), complete documentation; in good condition, without suction many new and original slip parts (Duesen; electrodes), as well as other spare parts. assembly and commissioning on request; ready for immediate use

Qty. 1 Second-hand taper pole pipe production line We have following taper pole pipe production line for sale Mfc.: CMF, Delem, Merkel, Bosch, Nachi, YSD, ESAB, (France, Korean, Japan and Chinese Manufacturer) Built: 2006 Stopped: 2012 3. Product Capacity: Profile 5,000 ton/year / Round pipes 10,000 ton/year i. (Capacity : Profile 6.9 pcs/Hr, Round 3.6 pcs/Hr) Price: Please provide us with your offer! (Further information can be submitted on request!) Production Description Size for Product Pole or Pipe type Conical Pole PolygonalPole Round Pipe Thickness mm 2.6,3.7,5.2,7.5 10 2.6,3.7,5.2,7.5 10~20 20~38 O.D mm ?190 ~ ?463 ?190 ~ ?820 22”~ 32” Length M 2.45 ~ 16.0 2.45 ~ 16.0 6.2 ~ 12.8 Rake About 0.43° About 0.43° Intensity Mpa T.S=510, Y.P=360 T.S=510, Y.P=360 T.S=650, Y.P= 50 ...

; ready to use

; ready for immediate use

Plasma cutting machine ESAB working area 1500 x 3000 1 x autogen up to 200 mm 1 x Plasma Hifocus 160 i with automatic gas console. see PDF document several plasma change torches available Very well maintained from: 10 / 2012; ready for use

TIG welding rectifier make ESAB type Power TIG 160 / LTR 160Mash. -No: 8429101564 Year 1991Welding range transformer stepless: 4 - 160 Axa0xa0xa0 TIG / DC: 4 - 160 ADuty cycle at 160 A: 35%xa0xa0xa0 at 110 A: 60%xa0xa0xa0 at 80 A: 100%Dimensions L x W x H approx: 700 x 350 x 400 mmfor welding electrodes and TIG, steel, VAWith- compl. Welding station equipment- mobile undercarriage self-madeused, from one operational resolution, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

; ready for immediate use

; ready for immediate use

CNC Portal Cutting Machine Manufacturer: ESAB Type: SXE P1 3500 LH Year construction: 2001 CNC control: Vision 51 Working area: 2x6 m Track: 8 m 2 x car use burner under power to visiton request dismantling and commissioning on request; available from 37 KW 2016

The machine is available for immediate delivery. The suction table is not included.

; Available from 37 KW 2016

Technical data: Max height of 4,500 mm / 4,600 mm Maximum throat depth 4,500 mm / 4,000 mm Welding source ESAB, LCA1200 / ESAB TAF 1250DC Welding machine carrier 1 x without welding equipment broken demotiert Type: MH45. 2 / BODE DSCN 3109

table width: 6000 mm table length: 27000 mm burner heads: 5 cutting width: 4000 mm control: Vison T5 Vers. 4 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC Gantry Flame Cutting Machine Incl. extraction Cutting range 24 x 4 m Total table size 27 x 6 m Marking unit 4 oxyacetylene burners (mixed gas) and a 3-phase unit (acetylene). The respective conversion kits to the standard version are still available. Machine can be inspected under power. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ESAB SXE-PI 3500 LH PT-24 plasma / oxy-fuel cutting system N.3 TORCHES AND N.1 PLASMA TORCH CUT FROM mm 1 TO mm 200 MAX SHEET 2500x3000

ESAB LAE 800 welding device The machine is located in France.

Esab CXD 3000 P Working range: 14000 x 2500 mm 2006 completely overhauled , new control system, new plasma system installed. 1x Plasma Plasmaarc 200 Cutting up to 40mm Burning table 2 x 6m inclusive Without burning tables , without filter system assembly and commissioning on request; ready for use

Amperage range maximum: 0 A Amperage range minimum: 0 A aligning for sections of a growing line ideal for wind tower, vessel, pipemills with rail bogie driven Load capacity per section:30 + 30 T Vessel range Minimum:    1500Ø Vessel range Maximum:    6500Ø No of wheels per section:4 Number of matching pieces:2 Length:                  4.500 mm  Width:                   2.200 mm  Height:                  1.000 mm  Weight:                  2885 + 3885 kg 

CNC Portal Plasma Cutting Machine Manufacturer: ESAB Eagle 2500 Year of construction: 2004 Control: Vision DNC Connection track width: 2,500 mm runway: 5 m Working area: 2 x 3 m Extraction table 1 plasma torch with power source Kjellberg HiFocus 160i automatic gas console (see PDF) cutting tools: up to 25 mm filter cutting system: Columbus Immediately available ; ready for immediate use