z blade used for sale

Three-phase motor, electric motor -Power: 7.5 kW -Speed: 1480 rpm -Shaft: Ø 38 mm -Construction: B5 -Protection class: - -Dimensions: 470/285/H350 mm -Weight: 69 kg

Gear motor, electric motor -Transfer in current condition as seen -Speed: 102 rpm -Power: 1.1 kW -Construction: B3 -Diameter shaft: Ø 40 mm -Protection class: IP 33 -Dimensions: 540/260/H300 mm -Weight: 52 kg

Gear motor, electric motor -Speed: 40 rpm -Power: 0.8kw -Construction: B3 -Diameter shaft: O 28 mm -Protection class: IP 44 -Number: 1x available -Dimensions: 410/190/H260 mm -Weight: 26kg

rand Zwick/Roell Type Material testing machine Chassis number FS3396 Length mm 1200 Width mm 700 Height mm: 2000 Transport dimensions L x W x H 2.5 x 1.2 x 2.0 Control type Manually operated Documentation No Instructions No Electrical diagram No Photos/film available: To follow

Electric motor for sale. Characteristics: - ▲380V / Y 560V (50Hz) 1465 1/min: 15kW - ▲400V/Y 690V (50Hz) 1470 1/min: 15kW - ▲475V (50Hz) 1470 1/min: 15kW - ▲440V (60Hz) 1465 1/min: 17kW - ▲450V (60Hz) 1470 1/min: 17kW

Gear motor, electric motor, electric gear motor -Speed: 80 rpm -Power: 0.37 kW -1x design: B5 -1x design: B3 -Diameter shaft: 22 mm -Protection class: IP 54 -Price: per piece -Number: 2x available -Dimensions: 365/138/H200 mm -Weight: 12.8 kg

Rotary axis drive, drive, limit switch -Manufacturer: Telemecanique -Type: ZCE01 -Quantity: 5 available Price: per piece -Minimum order quantity: complete -Weight: 0.05 kg

Fan, fan, electric motor, blower -Speed: 1360 rpm -Fan diameter: 500 mm -Hole circle: 540 mm/holes Ø 9mm -Quantity: 1x fans available -Dimensions: 565/565/H170 mm -Weight: 14kg

Inv. Num. : 7770 Type: KFU 3000 Producer: Zayer Created: 1990 Parameters: Operating system: HEIDENHAIN TNC 415 B Table length: 3000 mm Table width: 1000 mm Maximum table load: 10000 kg Max. Speed: 3000 1/min Axis X: 2700 mm Axis Y: 1000 mm Axis Z: 1000 mm Machine dimensions: 4000 x 2500 x 2800 mm Weight: 18600 kg Equipment: Staples (approx. 40 pieces) Vises (2 pieces) Angle (2 pieces) Clamping Blocks (2 pieces)

Gear motor, electric motor -Speed: 19 rpm -Power: 0.4 kW -Construction: B3 -Diameter shaft: Ø 40 mm -Protection class: IP 33 -Height shaft axis: 200 mm -Dimensions: 530/250/H295 mm -Weight: 56 kg

Gear motor, electric motor -Speed: 56 rpm -Power: 0.8 kW -Construction: B3 -Diameter shaft: Ø 40 mm -Protection class: IP 33 -Dimensions: 500/240/H295 mm -Weight: 50 kg

Geared motor, electric motor, three-phase motor, right-angle gear motor -Speed: 25 rpm -Power: 0.6 kW -Voltage: 500 VOLT Y -Design: B3 -Shaft diameter: Ø 38 mm -Protection class: IP 44 -Price: per piece -Quantity: 2 available -Dimensions: 490/250/H290 mm -Weight: 39 kg

For sale is a used long belt sander (The machine is in the preliminary stage, photo is of a similar machine) Manufacturer: Kuhlmeyer Model: ZBS Year of Make: 2003 Working Area: 3,000x800mm Band size: 9,000x100mm Included: Grinding table height-adjustable, 5-axis workpiece handling device, swap shelf and a supply of belts If you have any further questions, please call or write to us!

Gear motor, electric motor -Speed: 100 rpm -Power: 3 kW -Design: B5 -Diameter shaft: Ø 48 mm -Protection rating: IP 44 -Quantity: 1 piece available -Dimensions: 700/250/H320 mm -Weight: 57 kg

Gear motor, electric motor, electric gear motor -Speed: 9 rpm -Power: 0.37 kW -Construction: B5 -Diameter shaft: 47 mm -Protection class: -Dimensions: 700/250/H280 mm -Weight: 46 kg

Gear motor electric motor -Speed: 200 rpm -Power: 0.75 kW -Construction: B5 -Diameter shaft: Ø 32 mm -Protection class: -Price: per piece -Number: 2x available -Weight: 38 kg

Zeiss CNC Coordinate Measuring Machine Prismo MP5 Year of manufacture: 8/1999 Last calibration 9/2023 Measuring range: X= 900 mm, Y= 1200 mm, Z= 700 mm Device features, equipment: Control C98 with control panel Sensors RDS with RST Pushbutton Changer Magazine 5-fold RST 5x probing system Dpp7Jl Pushbutton Accessories Measuring ball Calculator with monitor Software Calypso Basic 5.4 Loading system Other accessories Complete retrofit C99 and Calypso possible

Geared motor, electric motor, electric geared motor -Speed: 5.83 rpm -Power: 0.75 kW -Design: B5 angle -Hollow shaft diameter: 42 mm -Protection class: IP 54 -Quantity: 2 pieces available -Price: per piece -Dimensions: 560/240/H320 mm -Weight: 56 kg

Stick electrode, wire electrode, welding wire -Diameter of electrode: 4.0 mm -Rutile electrode: for fillet welds and horizontal V-welds -Smooth sweat appearance and self-dissolving slag. -185% metal recovery: using high-speed welding -Number: 90x packages available -Price: per package

Key data: 120 l/min, 12 W, 7

Text

Key data: 400 l/min, 6

Central plant with 2 pieces of automatic centrifuges, operation until February 2019 with oil. The Cleaning system for oil incl. tank 20 m3, is equipped with two automatic centrifuges of 150 m3 each. 200 liters/min. The total capacity of the plant is 300 to 400 liters per minute. Oil or emulsion, with emulsion more than 400 liters possible. Two centrifuges T42 , Clean tank 20 m3 oil (divided into two separate tanks with overflow) incl. pump for Supply of production with pure oil. In addition, the system has a lot of accessories: all spare parts + an old one centrifuge from 1987 as spare parts dispenser, a lifting tipping device for the Sludge emptying of the 200 kg buckets. The sludge ejection runs with this centrifuge automatically into the bucket under the centrifuge. The scope of delivery also includes a additional electrical cabinet for a second system with the sam ...

Gear motor electric motor Electric gear motor -Speed: 40 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 32 mm -Protection class: IP 44 -Number: 3x motors available -Price: per piece -Dimensions: -Weight: 26 kg

Gear motor electric motor Electric gear motor -Speed: 16 rpm -Power: 0.33 kW -Construction: B3 -Diameter shaft: 48 mm -Protection class: IP 44 -Price: per piece -Number: 1x available -Weight: 43 kg

Gear motor, electric motor, electric gear motor -Speed: 3.15 rpm -Power: 0.18 kW -Design: B3 -Diameter shaft: 60 mm -Protection rating: IP 44 -Quantity: 1 piece available -Dimensions: -Weight: 62kg

faceplate diameter: 1250 mm turning diameter over slide rest: 2040 mm turning length: mm total power requirement: 55 kW weight of the machine ca.: 12 t dimensions of the machine ca.: m Brand Zerbst Machine no D982 Type DP 1 - 2.040 Ø Digital readout Maximum turning diameter 2.040 mm ø Passage 98 mm ø 4-Jaw Chuck 1.250 mm ø Speed 4,5 - 224 RPM Separate chisel support Engine power 55 kW Excluding slot table Quick-change holder Machine weight 12.000 kg Dimensions: Head: 2.500 x 1.800 x 1.700 mm support: 2.200 x 1.800 x 2.000 mm Electrical panel: 2.200 x 600 x 2.200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2.1.1. Walk-in cleaning booth, pre-treatment for steel and aluminium The cleaning booth is designed for automatic cleaning. Spraying can be done at medium pressure. There are 7 different spray tanks in the cabin. The part sizes are max. L= 6,000mm, W= 2,000mm, H= 2,300mm. 1 Dimensions of the cab length 6,500 mm Width 3,000 mm Height 3,600 mm 2 dimensions of the pre-treatment complete Length 6,600 mm Width 4,640 mm Debpm0Nom Height 4,300 mm 2.1.1.1. 1. Degreasing/Neutral Pickling Process Heated bowl, 50-55°C, time = 3-6 minutes, draining time = 80 seconds 2.1.1.2. 2. Process Acid Mineral Pickling Heated bowl, 50-55°C, time = 3-6 minutes, draining time = 80 seconds 2.1.1.3. 3. Rinsing Process 1 in this chamber rinsing is done at ambient temperature, time = 0.75-1.5 minutes, draining time = 1 minute 2.1.1.4. 4. Rinsing Process 2 in this chamber is rinsed at ambient tem ...

Gear motor, electric motor -Speed: 16 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: Ø 28 mm -Protection class: IP 44 -Number: 2x motors available -Price: per piece -Dimensions: 430/180/H220 mm -Weight: 19 kg

Light crane system Manufacturer: Zasche handling Type: GV 80 Year of Make: 2017 Load capacity: 80 kg with crane runway and lifting device

Powder coating plant (complete) with 3 zones of chemical pre-treatment and Hybird ovens (dryer and curing oven) Gas and electricity (gas or electricity also possible) The facility consists of: Chemical pre-treatment with reverse osmosis system Dryer with hybrid thermoblock Walk-in coating booth with extraction unit KG PSW 8000 Powder curing furnace with hybrid thermoblock Conveyor system with transverse displacement, manual Electric control unit Specification of production Type of workpieces varies Material of the workpieces Steel (other metals or multimetal possible on request) Maximum weight of the load carrier 200 kg System type: Manual conveyor Dimensions of the maximum workpiece in the curing furnace Max. length 3000 mm Max. width 1500 mm Max. height 1500 mm Dimensions of maximum workpiece in chemical pretreatment Max. length 3000 mm Max. width 800  ...

Gear motor, electric motor, electric gear motor -Speed: 83 rpm -Power: 0.8 kW -Construction: B3 -Diameter shaft: 40 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: mm -Weight: 51 kg

Gear motor, electric motor, three-phase motor, right-angle gear motor -Speed: 25 rpm -Power: 0.80 kW -Construction: B3 -Shaft diameter: Ø 48 mm -Protection class: EX -Dimensions: -Weight piece: 44 kg

Gear motor, electric motor -Speed: 204 rpm -Power: 4.0 kW -Construction: B3 -Diameter shaft: Ø 60 mm -Protection class: IP 33 -Dimensions: -Weight: 113 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 123 rpm -Power: 2.2 kW -Design: B3 -Shaft diameter: Ø 35 mm -Protection class: IP 33 -Number: 1x motor available -Dimensions: 640/290/H300 mm -Weight: 76 kg

honing diameter: 54 mm stroke: 99999 mm centre height: 9999 mm Control: FANUC total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC Ball and spherical honing machine The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Chemical pre-treatment for powder coating (3 zones) 1 Dimensions of the cabin length 3900 mm Width 1600 mm Height 2500 mm 2 dimensions of the pre-treatment complete length 4000 mm Width 3000 mm Height 4000 mm 3 Passage opening width 1000 mm Height 1700 mm The chemical pretreatment for the use of nanotechnology or phosphating consists of 3 stages in 1 spray chamber. Chemical spray pretreatment works in time and this means that the workpieces are manually pushed into the chamber. After closing the doors, the passage starts and the pumps start spraying. Each pump has different spray times. After the spraying process is finished, there is an alarm indicating that the door can be opened and the workpiece can be pulled out. All pre-treatment functions a ...

50x Zebra Symbol CS4070 Wireless Handheld Scanner – Used - : Price per piece ex location: only 165.-€ (net)! Ev. If you are interested, suitable chargers are also available for sale (for an extra charge)! Manufacturer: Zebra Type: Symbol CS4070 Price incl. 1 battery (others may be subject to an extra charge) Year of manufacture: unknown Condition: good – very good Available: immediately Location: Frankenberg camp / Saxony

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 150 rpm -Power: 1.5 kW -Construction: B3 -Diameter shaft: 50 mm -Protection class: IP 33 -Dimensions: 660/260/H300 mm -Weight: 74 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 100 rpm -Power: 1.5 kW -Construction: B5 -Diameter shaft: 48 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 600/297/H400 mm -Weight: 63 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 50 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 55 -Dimensions: 450/230/H180 mm -Weight: 18 kg

Liebherr slide-in gearbox from old stock ! As good as new MPS 45X21. 1X25.97 Bosch Rexroth : ZHP5 . 23-0356 . 10014 MNR : 1695745 CMAN / CMIT Item number: 1695745

: - Working width: - mm : - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

New Zig-Zag Cutter! Machine is designed to cut an 800mm Batch into an endless strip for Extruder feeding. 12 month Warranty! Description attached!

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 4 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: 60 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 800/300/H350 mm -Weight: 68 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Transfer in current condition as seen -Speed: 20/63 rpm -Power: 0.5/0.9 kW -Construction: B3 -Shaft diameter: Ø 35 mm -Protection class: IP 44 -Dimensions: 680/195/H320 mm -Weight: 53 kg

Rüttler mit Ausstreichwalze - Jogger with airremoval rollers Zöll Diplomat 701 PRE Year 1990 - Serial-No. 6171809 Size max. 860 x 1210mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Buchrückenrundemaschine - Book Back Rounding Machine Zecchini Saturno Year 1985 Working width max. 500mm Thickness of books 0 - 100mm Output 400 - 600 Blocks/hour Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Kanalventilator Absaugung - Duct Fan ZENNER VTZ 560/50/2-W (Absaugung - Extraction) Baujahr / Year 2001 - Serial-No. 64.031 Volumenstrom / volume flow 2.21 m3/s Totaldruckerhöhung / total increase of pressure 3880 Pa Dichte / density 1.2 kg/m3 Drehzahl / Speed 2920 min-1 Kupplungsleistung / required performance 14.4 kW Temperatur / temperature max. 80°C Zum absaugen von Holzspänen oder Papierresten For vacuuming wood chips or paper residue Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 146 rpm -Power: 3.0 kW -Construction: B3 -Diameter shaft: Ø 45 mm -Protection class: IP 33 -Dimensions: 630/260/H300 mm -Weight: 75 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 56 rpm -Power: 1.5 kW -Construction: B3 -Diameter shaft: 40 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 600/250/H300 mm -Weight: 62 kg

Universelle Stanzmaschine - Punching machine Masfeld ZEL 1903 Serial-No. 1903 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test