We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
meta name="robots" content="all">
119,436 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Multisaw Edger ZLT 500 with feeders 500/140 - Czech production - a movable target TECHNICAL PARAMETERS: cutting width 500 mm cutting height 140 mm min. material length 800 mm max. blade diameter 450 mm one movable target engine power 30 kW four lower pulling shafts two upper pressure shafts feed smoothly regulated on the inverter shaft steady two rows of pawls feed rolls 4 pieces roll length 600 mm roll width 450 mm roll diameter 70 mm receiving table 6200 mm chain width 60 mm seven pressure rollers two lower pulling rollers transport dimensions (length / width / height) 700/245/180 cm weight 3000 kg
used
Multisaw ZLT 500 edger with 500/120 feeders – Czech production – a movable shield with the possibility of installing several shields cutting width 500 mm cutting height 120 mm min. material length 800 mm max. disc diameter 450 mm one disc movable sleeve 70 mm fixed sleeve length 100 mm engine power 45 kW two upper pressing rollers four lower pulling ones feed smoothly adjustable on the inverter shaft support two rows of pawls max material width 700 mm length of feed rollers 3000 mm roll width 700 mm roll diameter 70 mm receiving table 6200 mm chain width 60mm seven pressure rollers two bottom pull rollers transport dimensions (length / width / height) 700 / 245 / 180 cm weight 3000 kg
used
Front axle excavator Zeppelin ZM 15 Number of 766337
used
ABEGG Ventilatore ZIEHL. noch nie benutzt NEW 4 PCs.
used
• Palletizer ZECCHETTI – 25.000 bph: • Year: 1993 • Producer: ZECCHETTI • Speed (BPH): 25.000 bph • Speed: 2.100 c/h - 12.500 bph on boxes of 6 bottles - 25.000 bph on boxes of 12 bottles. • 30 meters of tapes. • Possibility of work with 3 different pallets. • Multiple pallet stores. • Interlayer pad inserting. • Transport of products and pallets included. • Rotary pallet wrapper Siat included. • Safety protections. • Code R 22
used
Electronics unit CARL ZEISS JENA ZE2A Electronic unit for length dipstick IALK and display unit AE80 used, tested ! Dimensions: 170 x 90 x 86 mm
used
Good morning, We are stopping part of our mechanical workshop and wish to sell a batch of machines including the following machines. - Ziersch&Baltrusch CNC grinding machine - Horizontal metal bandsaw DoAll - Manual milling machine Jaspar Belgium. all three machines are in very good condition.
used
The Zetes MD4000 labelling system integrates seamlessly with existing production lines, even when space is limited. One single anodised base integrates the various components: ⢠Print engine of all leading manufacturers ⢠Can fit various applicator arms ⢠Unwinder and clutchless rewinder ⢠Various I/Oâs for use with external systems Easy to use ⢠Left and right handed positions for quick replacement of ribbons and labels ⢠Intuitive interface for easy manipulation ⢠Fast and easy look up Includes hoirizontal applicating arm Has been in use for 4 years but fully functional and carefully mantained.
used
Dust extraction system (Brand: F.Z. Francesco Zanetti s.r.l.) Model: F.AIR.B./DD 88 Type: self-cleaning filter Serial No.: 00 - 07 - 27 Year: 2000 Maximum treated air flow rate: 4800mc/h - Total pressure: 190 mm w.g. - Electric fan motor power: 4 Kw - Motor speed 2900 rpm - Supply voltage 220/380 - Electric fan Mod. EU 401 We attach some photos. Price negotiable.
used
Used Zip Pak RD Bag Zipper Applicator and Sealer VFFS with: Zipper Applicating System for applying a zipper material to flim prior to filling product in a Vertical Form Fill and Seal Bagger: Can be integrated with Horizontal Bagger for a press to close zipper Press to close technology Transverse zipper direction Small machine footprint Stainless steel frame Personnel guarding Film unwinder Adjustable dancer bar weight Film rollers: 35 wide 1750 RPM, 1/2 HP Zip Pak motors (4) Fully adjustable for vaious product sizes Last ran printed film 14 wide Two inline seal jaws 6 long Casters for mobility Electrics: 208/240 volts 3 phase 60 hertz 25 amps
used
Presetting device of the brand E. Zoller GmbH & Co. KG Type H620-00045 Voltage: 230 V Pneumatics: 4-6 bar Power:
used
Description: Nominal force: 250 kN Speed: 16 MPa Downward speed: 100 mm/s Upward speed: 450 mm/s Stroke of ram: 500 mm Outreach: 360 mm Maximum distance between table and ram: 800 mm Serienummer: 036-008/60 Total weight: 2.2 tons Temperature range: 10°C to 45°C Max. pressing force: 25 to, Approx. Onsite Dimension. (l x w x h): 2,060 x 1,000 x 2,700 mm, weight approx.: 8,000 kg, stroke: 500 mm
used
Max. pressing force: 160 to, Approx. Onsite Dimension. (l x w x h): 2,100 x 1,400 x 4,500 mm, weight approx.: 7,000 kg, table surface area l x w : 900x630 mm, stroke: 500 mm
used
Zanussi electrical cooking vessel, model: Z9BRGJDPFO, number: 90210002, year of construction: 1-2019, inside dimensions: 900 mm x 600 mm x 200 mm, total dimensions: 1000 mm x 1000 mm x 1000 mm.
used
intake opening: 2,500 x 2,000 mm rotor flight circle: 580 mm each rotor execution: special teeth motor power: 2 x 90 kW with planet gears weight: approx. 18,500 kg
used
ZENO double roller vorader ZDV 2500x2000, mobile on chain suspension, with discharge conveyor and magnetic separator, drive power 298 kW, 1900 rpm, MTU diesel engine, rotor flight circuit 575 mm, 2 x 12 rotor tools on tool holders, new design demonstration machine. ZENO Twin rotor shredder ZDV 2500x2000, mobile on chain chassis, incl. discharge conveyor and magnet separator, motor power 298 kW, 1900 rpm, MTU diesel motor, rotor flight circle 575 mm, 2 x 12 cutting inserts on tool holder, show machine.
used
Inlet cross-section: 3,000 x 2,000 mm Rotors: 2 pcs. Rotor flight circuit: 565 mm each Rotor version: 2 x 25 pcs. cutting plates on tool holders Drive: 4 x 45 kW Weight: approx. 18,000 kg Intake opening: 3,000 x 2,000 mm Rotor system: Twin rotor Rotor flight circle: 565 mm each Cutting system: 2 x 25 pcs. cutting inserts on toolholder Engine power: 4 x 45 kW Machine weight: approx. 18,000 kg
used
Inlet cross-section: 1200 x 1600 mm Drive: 110 kW, without gearbox Rotor flight circuit: 380 mm Rotor speed: approx. 470 rpm Rotor design: 66 cutting plates on tool holders Screen version: solid screen basket, reinforced with ribs Sieblochung: 15 mm Counter knife: with cutting gap adjustment Machine weight: approx. 5,900 kg Intake opening: 1,200 x 1,600 mm Engine power: 110 kW, without gearbox Rotor flight circle: 380 mm Rotor speed: approx. 470 rpm Cutting system: 66 cutting inserts on toolholder Screen: reinforced screencage, 15 mm perforation Counter knife: with mechanical adjustment device Machine weight: approx. 5,900 kg
used
intake cross section: 2500 x 1,700 mm motor power: 160 kW rotor flight circle: 670 mm rotor execution: cutting inserts on tool holders counterknife: with cut gap adjustment machine weight: approx. 24,000 kg
used
intake cross section: 1,600 x 1,200 mm motor power: 2 x 45 kW knife width: 55 mm knife number: 56 pieces rotor flight circle: 655 mm Planetary gearbox
used
intake cross section: 5,000 x 3,500 mm motor power: 2 x 110 kW motor power hydraulic unit: 22 kW rotor flight circle: 635 mm rotor execution: 244 pcs. cutting tools on tool holders screen: hydraulically tiltable hopper volume: approx. 40 m³ machine weight: approx. 55 tons
Inlet cross-section: 1200 x 2300 mm Drive: 30 kW Rotor flight circle: 450 mm Rotor speed: approx. 80-140 RPM Rotor version: 24 single tooth Screen design: reinforced solid basket, with ribs Hopper: 1,000 mm in height, without lid Machine weight: approx. 6,000 kg Machine number: G-1-66
Intake opening: 420 x 750 mm Motor: 7,5 kW Rotor flight circle: 250 mm Rotor speed: approx. 140 RPM Rotor version: 10 single teeth Screen design: reinforced, with ribs Hopper: 1,050 mm high, without lid Exhaust pipe 200 mm diameter Machine weight: approx. 900 kg
used
Hopper opening: 3,000 x 2,000 mm rotors: 2 Pcs. Rotor flight circle: each Ø 590 mm cutting tools: 13 pieces cutting plates 120 x 120 mm on tool holders bearing: pedestal drive: 2 x 90 kW machine weight: approx. 24,000 kg facilities: incl. hydraulic screen door latch / interfering substance removal
used
Inlet cross-section: 1200 x 1600 mm drive: 90 kW rotor flight circle: Ø 600 mm rotor speed: approx. 75Upm rotor version: 42 Pcs. cutting plates 60 x 60 x 30 mm on tool holders screen version: with quick-Change-device counter knife: with cutting gap adjustment gearbox: with torque-off material discharge by discharge conveyor TKF 400 x 5000 machine weight: approx. 13,400 kg machine number: A 2
used
Working width: 820 mm rotor flight circle: Ø 720 mm drive: 90 kW cutting system: 8 cutting blades equipment: mechanical adjustment of the cutting gap Machine weight: 3500 kg
used
Type: ZSA 1500 Working width: 1500 mm Flight circle metering drum: Ø 1600 mm Motor power: 18,5 kW Length metering device: 7800 mm Width metering device: 1600 mm Volume metering device: approx. 25 m ³
new
Infeed width: 720 mm infeed height: 330 mm rotor flight circle: 1000 mm number of cutting knives: 2 piece number of counter knives: 1 piece infeed: 2 x 3 rolls motor power: 110 kW screen perforation: Ø 30 mm machine weight: ca 7,800 kg
used
Inlet cross section: 2500 x 1900 mm drive: 2 x 110 kW rotor flight circle: Ø 745 mm rotor speed: approx. 93 RPM rotor design: 185 PCs. cutting plates 50 x 50 x 25 mm screen perforation: Ø 70 mm counter knives: with cutting gap adjustment machine weight: approx. 29,000 kg
used
Working width: 2000 mm rotor flight circle: Ø 1000 mm drive: up to 315 kW cutting system: 40 piece cutting bars facilities: counter knife traverse pivoting hydraulically Right-left operation Hydraulic hood opening Screen: hydraulically extendible
Surgical image intensifier (C - arm) Ziehm Exposcop 8000 with dual monitor. Digital multiple image memory, Sony video printer in good condition
used
Abegg to fan and the fan with fans Ziehl. noch nie benutzt NEW
used
used
Two-coordinate measuring instruments ZKM Applications: External measurements - Internal measurements - Bore distance measurements with double image eyepiece Shape tests with reable inserts Angle measurements with angle measurement slot and optical rotary table (2") Male thread measurements Equipment: Spitzenbock - Angle measuring device to the tip trestle (5") - adjustable V-bearing opt.-mechanical probe (measuring lever attachment) - adjustable plant table - incident light illumination Projection device - Rotary table with partial circle Increased optical touch accuracy through the use of inteference lines ZKM 01-150 Measuring range x - 150 mm Measuring range y - 100 mm Scale value 0.1 mm ZKM 01-250 Measuring range x - 250 mm Measuring range y - 100 mm Scale value 0.1 mm possible versions: ...
used
Two-coordinate measuring instruments ZKM Applications: External measurements - Internal measurements - Bore distance measurements with double image eyepiece Shape tests with reable inserts Angle measurements with angle measurement slot and optical rotary table (2") Male thread measurements Equipment: Spitzenbock - Angle measuring device to the tip trestle (5") - adjustable V-bearing opt.-mechanical probe (measuring lever attachment) - adjustable plant table - incident light illumination Projection device - Rotary table with partial circle Increased optical touch accuracy through the use of inteference lines ZKM 01-150 Measuring range x - 150 mm Measuring range y - 100 mm Scale value 0.1 mm ZKM 01-250 Measuring range x - 250 mm Measuring range y - 100 mm Scale value 0.1 mm possible versions: ...
used
A mobile ultrafiltration system is sold in a 20ft container with equipment: - Ultrafiltration modules type dizzer CL (Inge GmbH) - Backwash template 2.6 m3 - Pre-filter 300 ?m - Measurements for turbidity, conductivity and pH - PLC type T-Box for fully automatic control of the system - Operation of the system on site via touch panel as well as remote access via based visualization - automatic chemical dosing Additional additional modules can be purchased as an option: - 20ft expansion container with 12 additional UF modules - 20ft container with sewage and neutralization tank
used
ZUCKERMAN CHALLENGER- auto copy lathe and sander, capacity - ( mills 10" dia.by a max. of 120" long) mills using cup cutters- followed by (1) sanding station, unit has hopper feeder, mills & sands one part at a time, does parts like: boat oars, shovel handles, gunstocks, chair legs, ect. Price-$10,900
used
30 cm image amplifier with 2 x magnifying glass function 100 Hz double monitor, Black Vision, 250 Image Memory Usb DFP, DAP Resolution 1.2 - 1.4 Lp/mm X-ray emitter scan replaced in 2019 Refurbished
used
Ziehm Exposcop 7000 Compact Specifications: 23 cm BV, digital CCD memory LIH, video printer , with single monitor, resolution 1.2 lpmm. Sending images via the BNC video output. 6 months warranty. Monitor test according to DIN 6868 Part 57 until 2025. Very space-saving only 1.48 m2! With integrated second monitor. KV / mA range: 0.1 mA / 40 kV to 5 mA / 120 kV, Dimensions L: 180cm, H: 180cm, W: 100cm.
new
Exhibition machine Inlet width: 1,400 mm Inlet height: 550 mm Rotor diameter: 1,600 mm Chopping knife count: 4 pieces Counter-knife number: 1 pc. with cutting gap adjustment Feed unit: 2 x 5 rollers Drive: 250-500 kW Machine weight: approx. 30,000 kg
used
STEAM BOILER ELECTRIC STEAM BOILER ZANDER & INGESTRÖM AB The plant consists of two STEAM BOILERS, each 7MW, a feeding tank, and a control system. Capacity 7 MW Voltage 6 000 VAC Insulation Thickness (mm) 200 Control range 0,5 - 100% Design pressure 50
used
Jelly IMA Zanasi AZ40 6 positions, Elec: 380V 50Hz 14.2A 8kW, Air: 5ATM, Number of hours: 8094 h, Weight: 980 kg, Fill type: by dosing compress, Possible formats on the machine: 910x1200mm H1850mm, Cadence: 40,000 capsules / hour
used
Rotor Diameter: 1000 mm
new
capacity 90 degrees: round: 240 mm capacity 90 degrees: square: 240 x 240 mm capacity 90 degrees: flat: 165 x 210 mm : 195 mm : 185 x 185 mm : 130 x 190 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 85 x 85 mm capacity 60 degrees: flat: 85 x 120 mm : 170 mm : 145 x 145 mm : 60 x 195 mm cutting speed: 20 - 85 m/min dimensions of saw-band: 2725 x 27 x 0,9 mm : 315 mm work height max.: 900 mm Motor output: 1,2 kW Weight: 330 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
cutting diameter: 220 mm saw band length: 2450 x 27 x 0,9 mm table height: 915 mm band speed: 35 + 70 m/min connected load frequency: 400 V capacity 90 degrees: round: 220 mm capacity 90 degrees: square: 210 x 210 mm capacity 90 degrees: flat: 230 x 185 mm total power requirement: 1,2 kW weight of the machine ca.: 240 kg dimensions of the machine ca.: 870 x 1550 x 1740 mm The Zimmer Z241/R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stays through one Safety limit switches stand. The reduction is infinitely variable Hydraulic system adjustable. The saw arm can be raised after the cut any position. The saw arm remains at the desired position stand. The Z241 / R has the following features: Hydraulic cylinder, emulsion pump, eccentric tensioner, base, saw band, 400V Connector -16A- The machine is completely assembled and delivered ready for use. ...
used
CATALOG NO. 7091 TECHNICAL DATA - dimension of the loading hopper length/width 1000x800mm - rotor width 800mm - 15kW motor - sieve - knife dimensions 40x60mm - number of knives 20 pcs - autoreverse - pressure drawer - outlet for chipped wood, diameter 260mm - dimensions length/width/height 2040x1700x1530mm - weight 1680kg ADVANTAGES – German production – unpainted - very good condition – used chipper The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 39900 PLN Net price: 8867 EUR depending on the price 4.50 EUR Net price: 10500 USD depending on the price of 3.80 USD (Prices may vary with higher fluctuations) Planers and Moulders, Planer, ŻEFAM ,DZSB-40, Planer in poland, Planers and Moulders in Poland, Woodworking ...
used
Disc separator Zeno, type ZSS 1200 x 4500, with FE separator and conveyor technology, very good condition Specifications Disc separator with elevation Manufacturer: Zeno Type: ZSS 1200 x 4500 Year of construction: 2015 Grain size: 0-30 mm Working width: 1200 mm Length: 4500 mm Drive power: 3 x 7.5 kW Separate control panel Elevation height: 1000 mm FE separators Manufacturer: Solau Type: DND-AC M5 Working width: 800 mm Drive power: 2.2 kW Self-Cleaning Device – Wiper Conveyor Feed belt Length: 5000 mm Slope: 25° Working width: 1200 mm Driver height: 40 mm Height of side wall: 400 mm Drive power: 2.2 kW Belt speed: 0.3 m/s Discharge belt Length: 3500 mm Slope: 25° Working width: 1200 mm Driver height: 40 mm Height of side wall: 400 mm Drive power: 2.2 kW Belt speed: 0.4 m/s Discharge height: min. 2000 mm Collection belt fraction 0-30 mm under disc ...
used
Citrus juicer adapted to different sizes of fruit, very good condition, hardly used, clean, neat, ready to work. Very efficient, solid, trouble-free.
new
3 x Diverter ZWR-150-AS/AS-H0/R2-D-S Distribution or collection element in pneumatic conveyor systems for powdered and granular Products from a wide range of industrial sectors. Factory No. / Item no. /Drive end: 92576 / -- / R 92577 / -- / R 92578 / -- / R GENERAL DATA Product: Li2Co3; LiOH Powder Bulk density: 380.0 kg/m3 Bulk density: 900.0 kg/m3 Grain size distribution: 0.050 mm Grain size distribution: 0.400 mm Product temp. min.: 10.0 °C Product temp. max.: 35.0 °C Ambient temp. min.: 10.0 °C Ambient temp. max.: 35.0 °C Discharge pressure: 0.00 bar (g) Explosion protection: According to customer specifications, no explosion protection provided Design data Max. operating pressure: 6.00 bar (g) Compressed air supply: 4.50 bar MATERIALS / DESIGN Execution: Distribution Housing: Cast aluminium EN AC-42100 (A375.0) with replaceable stainless steel in ...
used
We sell a wheel excavator ZM12 without motor