wood boiler used for sale

Stainless Steel Dough Bowl with Trolley for Diosna Spiral Mixer Type SP 160 AF

Steam Boiler CHP Power Plant with 240 MW Pyroflow CFB Boiler A combined heat and power (CHP) plant in very good condition, with an electrical capacity of 88 MVA and a thermal capacity of 240 MW. The plant is designed to operate primarily on wood-based biomass, with coal as a backup fuel. This is a complete power plant, still in full operation, and includes all technical systems from fuel feeding to the dispatch of electricity and live steam. The equipment has been exceptionally well maintained and extensively upgraded throughout its lifetime, meeting the most stringent modern quality standards. The steam boiler utilises Circulating Fluidised Bed (CFB) technology with the commercial-type PYROFLOW, manufactured in Finland by Ahlström in 1989. This CFB boiler delivers a steam flow of 100 kg/second at a pressure of 137 bar and a temperature of 535ºC. The primary fuel has been wood-ba ...

Biomass CHP Boiler Plant – 5.4 MW Thermal and 995 kWe Turbine Capacity A lightly operated, complete biomass CHP boiler plant featuring a 9.5 MW bubbling fluidized bed boiler (BFB), designed for wood-based fuels. The plant includes a back-pressure steam turbine and a heat exchanger for hot water production from back-pressure steam. The plant was built by Estonian Filter Solutions, a company highly experienced in steam boiler plant engineering and EPC contracting. The BFB steam boiler was delivered by Vapor Boilers Finland. The steam turbine was manufactured by Triveni Turbines (India), in combination with a generator and controls from ABB. Other key equipment includes KSB pumps, conveyors from Technobalt AS, and rotary airlock valves from Rotolok UK. The power plant was commissioned in 2013 and operated at partial load until 2015. The control system, developed by Filter Solutio ...

Double jacket, Tiltable drum, Incl. Berief L25 lifter for 200L eurobins, Capacity: 1600 litres, Heating: steam, max. 10 bar, Power: 3 x 400V, 50Hz, Dimensions: 4000 x 2000 x 2300 mm

F20 BOILER : ORGANIC HEAT TRANSFER MATERIAL HEATER ORIGIN : CHINA RATE CALORIFIC POWER : 3500KW MAWP : 1.0MPa MAX. WORKING TEMP. : 320°C ALL UP WEIGHT : 19.5t HYDARULIC TEST PRESSURE : 1.5MPa

F24 BOILER : ORGANIC HEAT TRANSFER MATERIAL HEATER ORIGIN : CHINA RATE CALORIFIC POWER : 3500KW MAWP : 1.0MPa MAX. WORKING TEMP. : 320°C ALL UP WEIGHT : 19.5t HYDARULIC TEST PRESSURE : 1.5MPa

Capacity: 2500 kg / h, Heating: steam, Cooking time: 120 min

Boiler Polzenith 1.6 MW, built in 2007 Very well preserved combustion plant make Polzenith 1.6 MW heating capacity. Complete system included - Fuel stock. Steel construction with moving floor - Scraper conveyors - Beth electrostatic precipitator with electric cabinet - Chimney height approx. 12m - All flue gas lines - Complete with switchgear and hydraulic system System professionally dismantled immediately ready for loading.

A professionally dismantled and preserved steam boiler system with a Loos steam boiler and Weishaupt burner is available. 1) Loos UL steam boiler, year of construction: 1991, max. steam output: 6000kg/h, max. operating overpressure: 16bar. 2) Dual fuel burner Weishaupt Monarch RGL 60/2-A, year of construction: 1991, version: ZM, output range: 800kW-6600kW, gas type: N, gas category: I, gas setting pressure range: 30mbar-170mbar, oil throughput range: 120kg/h-556kg/h. Documentation available. An on-site inspection is possible.

Terlet Terlotherm Scraped Surface Heat Exchangers (SSHE) for inline heating and / or cooling of liquid, viscous and high viscous products with or without whole parts (up to 25 mm), like starch preparations, soups, sauces, dairy products etc. This model is special designed for working under higher pressures. Patent under no. 1006155. Scrapers can be easily replaced. CIP Cleanable. Inspection without removing seal. Lid can be opened with clamps. Large heating area on limited floor area. Tangetiale inlet. Accelaration and deceleration area. No damage to the product. Maintenance friendly, only one seal and one drive. Product volume: 45 liter. Number of scraper rows: 4. Inner vessel: 20 Bar - 200 °C - 45 liter. Jacket: Steam 8 Bar / Water 4 Bar - Steam 175 °C / Water 100 °C - 30 liter. Motor: 5,5 kW - 1.464 / 369 rpm - 400 V - 50 Hz - 10,5 A. Total height: 277 cm., Type of Machine: Scraped ...

ALL PURPOSE 2-SHAFT SHREDDER 1.250 mm.60 kW, for waste of plastics, WEEE, light metals, cables, tyres, bulky waste and more, This is a versatile 2-shaft shredder, a new machine engineered to offer the best possible results in size reduction of various materials., Constructed entirely in Italy, according to the latest safety regulations with top quality materials and components., Reliable, evergreen, economic when compared to other EU brands of same quality, this machine comes from our long experience in size reduction of differente waste materials., Post-sale assistance is available with us and our 24/7 on whatsapp.., n.2 x 1.250 mm long shafts, 17-21 tpm Shredding chamber :1.250 x 900 mm, Electric motors 2 x 30 kw (or bespoke to project), planetary gearboxes, grease lubrication, inverter for reverse movement on pre-settable threshold, n.25 knives in sturdy steel, 50 mm.thick, 2 hooks (f ...

Max. permissible Pressure: 24 bar Test pressure: 45.6 bar Max. permissible Temperature: 224 C Steam capacity: 12000 kg/h Total volume: 19800 l Subject to prior sale - errors possible! Internal reference number: D-1223

Max. permissible Pressure: 16 bar Test pressure: 30.4 bar Max. permissible Temperature: 204 C Steam capacity: 10000 kg/h Total volume: 16400 l Subject to prior sale - errors possible! Internal reference number: D-1224

We are offering for sale a complete used VAS thermal oil system built in 2003 thats fully functional . Technical Specifications: - Thermal output: 6 MW - Electrical output: 1.1 MW (ORC) - Year of construction: 2003 - Note: ORC module available for separate purchase System Components : - Material supply system - Firebox with grate - Thermal oil boiler, heat exchanger, and Eco unit - Thermal oil piping, components, thermal oil, and insulation - Filter system - Chimney system and flue gas ducts including insulation - ORC module and generator - Ash disposal and ash container - Hydraulic units including lines and hydraulic oil - Electrical system and control cabinets - System control including PC and software - Air compressor, dryer, compressed air tank, and compressed air lines - Aboveground heating network including insulation, heating valves, and heating pumps - Overhead crane - Water  ...

Two identical Loos steam boiler systems with Weishaupt burners are available. 1) 2x Loos International U-HD 1250 steam boilers, year of manufacture: 2003, max. operating pressure: 10bar, steam output: 1100kg/h, total volume: 1365l. 2) 2x Weishaupt G7/1-D ZD-LN gas burners, year of manufacture: 2003, category: I2ELL, gas type: N, output range: 250kW-1550kW, min./max. connection pressure: 15mbar/500mbar. Both systems including condensate collector and accessories. An on-site inspection is possible. Expected to be available starting 2027.

Equipment: Heatable/coolable, Insulation, Overpressure,Manufacturer: Smeja,Condition: used,Volume: 554,Max. overpressure: 2.5,Max. permissible Operating temperature : 138,Top shelf: screwed cover,Design: upright,Stand shape: feet,Number of feet: 3,Heating/cooling (filter bar): available,Temperature control inside: solid pipe coil,Insulation: available,Insulating jacket: hermetically welded,Material insulation jacket: stainless steel,Diameter inside: 690,Diameter outside: 800,Total height: 2,300,Type plate: Yes,Outlet: DN40 DIN 11851 ,Remarks: Solid pipe coil approx. 5 turns slight metallic discoloration

We are offering, available for immediate delivery, an Exhaust Gas Steam Boiler, removed from a well-maintained Combined Heat and Power (CHP) installation. Designed to recover thermal energy from the exhaust gases of an MTU 1,600 kWe gas engine, this boiler converts waste heat into valuable process steam, significantly improving overall plant efficiency while reducing operating costs and CO₂ emissions. Technical Specifications Manufacturer: Ambitermo Engineering Model: RSB-H e 1130 Year of Manufacture: 2012 Steam pressure: 11 bar Thermal output: 784 kW Heating surface: 292.49 m² Capacity: 6,692 litres Design temperature: 20–188°C Hydrostatic test pressure: 17.05 bar Empty weight: 10,400 kg Fuel source: Engine exhaust gases Construction Standard: EN 12952 / EN 12953 CE Certified Complete Heat Recovery Package The system includes a three-way exhaust gas dive ...

Stainless steel brewing vessel as a wort kettle and whirlpool combination with an external boiler., Additional title: brew vessel from stainless steel, Total volume: 260 hl, Diameter approx.: 3 m , Diameter incl. insulation approx.: 3 m, Frame height: approx.: 2 m, Width: 3,4 m, Material: stainless steel 1.4301 (AISI 304), Base construction: on stainless steel pipe supports, ground pegged, Features: external boiler, conical hood stainless steel, D = 3200 mm), conical insulating hood (stainless steel outside diameter = 3400 mm), 2 outlets DN200 und DN100, manhole DN600, outlet vent (12000 mm), interior lighting

Three-pass steam boiler (Loos, 1994) with oil and gas firing for the production of 7000 kg/h of steam. The boiler water chamber holds 90 hl of water. Other components: - Combination burner (Saacke) for oil and gas firing - Gas control system - Oil supply with suction pump unit (hp technik) - Economiser (2005) with a heat output of 275 kW - Feedwater tank (Loos, 1994) with a capacity of 40 hl - Water softening system (Pentair, 2024) - Feedwater pump (Grundfos) with a power rating of 5.5 kW - Operating hours counter for oil and gas operation - Control cabinet with operating elements - Various pipework, valves and fittings, Additional title: oil- and gas-fired steam boiler of the three-pass design with an economiser, Steam capacity: 7000 kg/h, Max. operating overpressure: 10 bar, Water volume steam boiler: 9000 l, Position: lying on foundation plate, Base construction: three‑pass boiler d ...

- Manufacturer: Urbas - Model: UR-FFR-3500 - Year of Manufacture: 2011 TECHNICAL DATA - Nominal thermal output: 3,500 kW - Fuel heat input: 4,000 kW - Max. operating pressure: 6 bar (test pressure 9.5 bar) - Max. flow temperature: 110 °C - Heating surface: 257 m² - Water content: 10,600 l - Empty weight: 21,000 kg - Grate area: 5.5 m² - Flue gas volume at nominal load: approx. 13,000 m³/h - Flue gas temperature: 150 °C - Fuel consumption at nominal load: approx. 2,390 kg/h - Electrical connected load (boiler incl. fuel feed): 152 kW - Fuel: untreated wood chips, bark, industrial chips (moisture 30–65 %, calorific value 1.59–3.92 kWh/kg) - Chimney: stainless steel, 17 m height, inner diameter 650 mm System Components : - Material supply system - Firebox with grate - Heat exchanger and Eco filter - Filter system - Chimney system and flue gas ducts including thermal insulation  ...

external wort boiler for brewhouse 130 hl knockout capacity;, Additional title: tube and shell heat exchanger, Pressure shell/tube: 2 bar, Volumke shell/tube: 200 l, Material: stainless steel 1.4541 (AISI 321), Base construction: vertical tube and shell heat exchanger with compensator and with support, Features: Steam- and condensate fittings; safety valvel

Unical MD 186 Commercial Gas Boiler Auction-ID: A1-48805-202

Description: see pictures and type plates Type 1900 Operating overpressure 6bar Content 1720l Flow temperature 100°C Heat output 1400KW

Wall-hung gas condensing boiler ecoTEC Pro VMW IT 286/5-3 H Auction-ID: A7-49228-8

Tower boiler Hybrid S 35/200 BS1 Auction-ID: A7-49228-1

Steam generation plant, comprising the following main components: - Three-pass steam boiler (Loos) for the production of 2,000 kg/h of saturated steam at rated load - Oil burner (Weishaupt) for EL heating oil with an output of up to 2,145 kW - Economiser (Loos) with approx. 30 m² of heat transfer surface area and an insulated casing - 2 feedwater pumps (Grundfos) - 1,500 l insulated feedwater tank (Loos), horizontal, with feedwater degassing, Additional title: oil-fired three-pass steam boiler with economiser, Steam production capacity: 2000 kg/h ; corresponds to a gross heat output of 1,335 kW, Max. operating pressure: 13 bar, Max. operating temperature: 195 °C, Exhaust gas loss: 4,6 %, Voltage: 400 V, Frequency: 50 Hz, Position: horizontal, Base construction: three-pass design, Features: Steam boiler; oil burner; exhaust gas heat exchanger (economiser); feedwater tank; 2 x feedwater  ...

FIRETUBE NATURAL GAS BOILER Al 25,000 kg/hr Packaged Boiler F&A 100° Packaged Firetube Boiler designed to BS-EN, with steaming capacity 25,000 kg/hr F&A 100°C feedwater temperature.

Type: MTC D 50/10E-4.1 10.81 Year of Make: 2015 Volume flow: 28m³/h Lifting height: 371.51m Electrical power: 55kW Auction-ID: A7-49594-4

Boiler Type TDC16 Design pressure:18 Max working pressure:17 Test pressure:23.4 Operating water volume 25,400 Design code:TRD Manufacturing date:2013

Height=1.4 m, Overall length= 1.11 m, Overall width= 1.46 m, Net weight= 311 kg,

Volume flow: 28m³/h Lifting height: 371.51m Electrical power: 55kW Auction-ID: A7-49594-5

Christian Carl CC raw boiler with 315l filling volume, in very good, maintained condition Diameter = approx. 100cm Total height = approx. 320cm - Height of boiler = approx. 160cm - Height dephlegmator approx. 160cm Auction-ID: A1-49805-2

Capacity: 18 bar. Steam boiler with Weishaupt burner type: G7/1-D ZMAD, power 150 - 1750kW. Heating power: 1645kW. Steam production: 2500kg/h steam, with feed water tank. Capacity: 3900 liters. Equipped with accompanying documentation folders. Auction-ID: A1-49552-92

Max Weishaupt steam oven with oil burner, in very good maintained condition Length= approx. 190cm Width= approx. 100cm Height= approx. 180cm Auction-ID: A1-49805-6

Christian Carl CC Fine Combustion Boiler with 265l Filling Volume, in Very Good, Maintained Condition Diameter = approx. 70cm Total height = approx. 335cm - Height of boiler = approx. 170cm - Height of dephlegmator approx. 165cm Auction-ID: A1-49805-3

Christian Carl CC raw boiler with 310l filling volume, in very good, serviced condition Diameter = approx. 100cm Total height = approx. 320cm - Height of boiler = approx. 160cm - Height dephlegmator approx. 160cm Auction-ID: A1-49805-1

Motor logs gripper with electro-hydraulic drive. Diameter: 1,000 mm Weight: 1,260 kg Drive parts: 1) Electric motor 5.5, kW - 100% ED, protection class IP 54, rotary 1,450 rpm, operating voltage 380 V, 50 Hz 2) Constant pump - axial piston - inclined axis design, type A2FM. Flow capacity 23.2 l/min 3) Hydraulic cylinder (2 pcs.) Type 80/55, MAKE MRS double-acting, piston rods hard chrome-plated 4) Tax block NG 10, make Of Herion Turning ranges, change of direction of rotation changing from right to left and left to right, for all drive parts of Pos. 1) - 4) Fittings: made at Ermeto Electrical control: Installation according to electric circuit diagram No. 26.0.144.4 In very good condition!

Wood Turning Lathe Precision device for professional users, with grey cast iron variable speed control high degree of spindle concentricity Spindle can be fixed all 15° LCD speedometer One hand operation of the tailstock and tool rest with quick-release mechanism Voltage: 230V / 50 Hz Engine power: 735W (S1 100%) Tip height: 160 mm Top width: 510 mm Speed ranges: 250-750 m-1, 550-1650 min-1, 1300-3850 min-1 Spindle stock rotation: 180 degrees Headstock thread: M33 DIN800 Morsekonusaufnahme: MK2 / MT2 Quill stroke: 63 mm Weight: 52 kg Dimensions: 1035 x 305 x 449 mm G & HM-D510F

Stack dimensions (LxWxH) - 16m x 1,4 m x 1,6 m automatic drying by means of computer Heating power - 90 kW Top Condition

Cutting Height - 250 cm, with small changes even up to 300 mm. Width - 450 mm. Feed continuously, up to 40 m / min. 2 moving sockets for 3 blades each and one middle socket is possible. Engines - 2 pc. each 45 kW Complete with round wood feeder. Wood rotating device and centering. Automatic remote control.

gebr. Wooden tongs / tree pliers / pipe wrench

The plant is 6 months old and is being abandoned due to conversion of production. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. There are 2 containers of wood chips/firewood (35m3) to be connected. NOTE TO PICTURES: Plant can only dry 2 containers and is half as wide as shown on pictures. Construction analogous to drying system for 4 containers! Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) System consists of: intake hopper for air incl. dust filter Blower unit ( ...

Important and outstanding design features of the RaptorX-SL with steel substructure / RaptorX-SL2200/S20 The application variety of a RaptorX-SL CNC Fraes machine is variable due to the adjustable working area (read-through shoe under bridge: 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (at no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale ) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-plates. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to about 400mm height (at 400mm ...

Specifications / Technical data S-1000/T Portalfraesmaschine / Engraving machine With the T-variant of the High-Z CNC-Fraese you acquire old-fashioned technology with the certain i-tuepfelchen in TUeV-certified quality (Emc). The High-Z/T Fraese is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. Through the ball-circuit spindles used, the High-Z/T achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm. At the same time, high travel speeds of up to approx. 108mm / second ( 6500 mm / minute ) can be achieved. This is how engraving and fraes speeds of up to approx. 4500mm/min can be realized and urgent journeys up to approx. 7000mm/min. Here you can see a video about empty runs with the new high-Z/T 3D CNC machine. This makes this machine series in the industrial sector just as applicable for work ...

Specifications / Technical Data S-1000/T CNC-Router / CNC-Engraver With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T CNC-engraver achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machine you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This cnc-router series is usable in the industrial field as well as for works like engraving, milling, dr ...

Wood chip dryer, firewood dryer for 4 containers The plant is abandoned due to conversion of the production. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. 4 containers of wood chips/firewood can be connected ( 35m3). Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) System consists of: intake hopper for air incl. dust filter Blower unit (radial fan with motor 11kW) Heater 480kW Funnel for air flow incl. 4 shut-off valves and & 4 pieces connections Power con ...

Specifications / Technical Data S-720/T CNC-Engraving-Machine / Milling machine / CNC-Router With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T 3D-cnc-engraver was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T cnc milling machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This cnc-machine series is usable in the industrial ...

Wood Turning Lathe big turning diameter over bed allows the turning of workpieces with large diameter - ideal for turning E.g. plate user friendly adjustable speed Digital speed display comfortable working with hand pad and quick adjustment Spindle/tailstock bore 10 mm Top width: 457 mm Tip height over machine bed: 153 mm 3-stage variable spindle speed: 650-1450 min-1, 1250-2800 min-1, 1600-3800 min-1 Headstock, thread: M33 DIN800 Motor power S1 (100%) / S6: 550W / 770W Mains voltage: 230V Net weight: 33kg G & HM-D460FXL

PIN cutting machine Clamping width of 240 mm beam height of 320 mm spigot strengths of Max 130 mm PIN length of 350 mm motor power 2,2 kW 380 Volt motor weight approx. 120 kg