winding machine used for sale

Universal tool milling machine DECKEL FP 1 with 3 axis active digital display Heidenhain TNC 113 Year of construction: 1987 Travel: X 300 Y 160 Z 340 Speed range: 40 – 2000 rpm With the following accessories: Universal table 600 mm x 250 mm clamping surface Movable vertical milling head Extendable drill quill Infinitely variable feed via potentiometer 1 machine vice 1 counter holder with counter bearing 1 pc. milling mandrel long 0 22 mm Various tool holders S 22 x 2 Bellows Z Axis Machine light Automatic central lubrication pump Chip collection plate Coolant system Operating instructions THE MACHINE IS IN VERY GOOD CONDITION

Standard performance connection to 380 V, 50 Hz, 3-phase. Equipment: 2 grinding spindles zubehoer ample tool weight:600 kg Flue requirements:1.5x2.6 m -cooling agent device with electric pump

Thermal laminating machine Max sheet size 580 x 740 mm min. Sheet size 210 x 210 mm Material thickness 105-500 grams Speed of 30 to 50 m / min. Mass 3660 x 1278 x 1780 mm

Compact and fast strapping machine with maximum package dimensions of approx. width 600 x height 600 mm from a renowned German manufacturer, designed for high speed and trouble-free operation. Equipped with an ergonomic and uncomplicated bobbin changing and threading system. -Closure type: Welding using the hot wedge method. -Up to approx. 48 straps per minute. -Tape type: PP tape. -Bandwidth 5-9 mm adjustable: Set to 5 mm. -Belt tension adjustable on the operating terminal. -Soft tension possible. -Standby function/power saving mode. -Stable foot pedal. -Low-maintenance and low-wear belt frame. -Sliding and lockable via castors. The machine can be demonstrated under electricity.

Manufacturer/manufacturer: Arburg Typ/type: 420 C 1300-350 Year/year: 2008 Control/controller: Selogica Clamping force/clamping force: to 130 Holmabstand/Dist.Betw.Tiebars: 420 x 420 mm WZ height/mould hight: min 250 mm Opening/opening stroke: 500 mm Plate distance of max/Max open daylight: 750 mm Auger/screw size: 45 mm Stroke volume/shot volume: 230 ccm spec. Spritzdr / injection pressure: 1670 bar General / General engine power: 22 kW Heating/heating power: 8 kW Dimensions/dimensions: 4.3 m x 1.6 m x 1.8 m Weight/weight: 4300 kg

Deep Hole Drilling Machines Kramatorsk KJ1910 used machine but very good mechanical condition. Machine can be inspected in our warehouse in Gussago BS (Italy) Deep hole boring machine - heavy duty deep hole boring machine Kramatorsk KJ 1910 Year of manufacture 1986 Maximum boring diameter, mm 600 Maximum use of lenght mm 10000 (10 meters) Max 25 ton Spindle diameter hole mm 700, Main motor power, kW 85 Counter rotation motor is 95kW Machine overall dimensions, mm 25550 x 3000 x 2290 Machine weight, kg 83000 Mimu machine tools (Italy) machine tools

Maximum punching format: 730 x 1040 mm Max pressure: 300 tons Thickness: 0.1-2 mm Punching accuracy: ± 0.1 mm Maximum Investor pallet height: 1280 mm Maximum speed: 7,500 sheets / hour Machine weight: 15,000 kg Dimensions: Width length 260 cm height 582 x 386,5 x Power: 16 kw

Max sheet size 1300 x 1100 mm min. Sheet size 350 x 350 mm Precision +-1.5 mm Speed 6,000 sheets / hour Power 12 kW Length 12,5 m Weight 6.8 t

High-quality airpad machine from a reputable manufacturer. Suitable for the production of individually defined air-filled protective and filling elements made of PA and PE film. Usually, four air cushions are created per work cycle. Different formats can be produced. For this purpose, 10 programs are available for storing several parameters. By calling up the corresponding program in the display, air cushions from 4 cm to 16 cm in length and individually defined filling levels can be produced. The resulting air cushion membranes are wound into rolls by means of a motorized device. When the roll is full, the machine automatically shuts down. Then the finished roll can be removed manually and then used as packaging material. The machine can be pushed over rollers and fixed by brakes. The machine can be demonstrated under electricity.

maximum format 1060 x 800 mm min. size 350 x 350 mm Speed 80 m / min. Paper thickness 105-500 grams Energy 101 kw Weight 8500 kg Mass 8860 x 2380 x 3000 mm

Capping machine incl. brushless motor with friction wheels, container diameter 10-100 mm, capacity maximum 25 cycles / min.

This machine is particularly suitable for the processing of electrical waste with PVC and rubber. Diameter range 2 - 115 mm Cutting speed 35 meters per minute Weight 350 kg

High-quality airpad machine from a reputable manufacturer. Suitable for the production of individually defined air-filled protective and filling elements made of PA and PE film. Usually, four air cushions are created per work cycle. Different formats can be produced. For this purpose, 10 programs are available for storing several parameters. By calling up the corresponding program in the display, air cushions from 4 cm to 16 cm in length and individually defined filling levels can be produced. The resulting air cushion membranes are wound into rolls by means of a motorized device. When the roll is full, the machine automatically shuts down. Then the finished roll can be removed manually and then used as packaging material. The machine can be pushed over rollers and fixed by brakes. The machine can be demonstrated under electricity.

Sweco Taumel sieve ø 1200 mm different screens available.

FOUR SIDED PLANER model WEINIG PROFIMAT P 23 E with 5 spindles second hand machine working condition : Excellent CE mark : Yes volt. 380/50 grooved table ( removable ) quick tool locking device with tools : Yes , as in video Composed by 5 spindles , 4 motors : 1° spindle : planer . motor power Hp 5,5 ( Kw 4 ) 2° and 3° spindles : right and left vertical . motor power Hp 7,5 ( Kw 5,5 ) 4° spindle : thickness planer . motor power Hp 10 ( Kw 7,5 ) 5° spindle : planer . motor power Hp 5,5 ( Kw 4 ) grooved table ( removable ) quick tool locking device Technical details : forward motor power Hp 4 ( Kw 3 ) shaft rotation speed rpm 6000 feed speed : from 5 to 24 mt./min. max. useful working width mm. 230 max. useful working height mm. 120 shaft diameter mm.40 inlet length mm. 2000 automatic lubrication system electric height adjustment set of service keys / d ...

Manufacturer: KRONES Type: K405-xxx Model: 960-16-5-5 YOB: 2003 Performance: 16,000 bottles/hour Running direction: RM clockwise feeding: linear - straight Aggregates: Agg 1 PWL460, AGG 2 PWL 300, AGG 3 donation unit Bottle table: servo Guiding: 1 x retaining infeed starwheel, 1 x discharge retaining starwheel Voltage: 230/400 V Electricity: 3PH/PEN Nominal frequency: 50 Hz Control voltage: 24 V Label: Body, back, wrap around Machine dimension: L = 3, 00 m x W = 2, 20 m without partly overlapping of the unit and discharge extension.

Key data: 600 mm, 1250 mm, 3000 1/min

Machine Details Stock-No. 1105-03939 Type of machine CNC Lathe - Inclined Bed Type Make GILDEMEISTER DMG Type NEF 600 Year of manufacture 2006 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time immediately Freight basis EX WORK Price Technical details turning diameter 600 mm turning length 1250 mm control SIEMENS 840 D greates pass round over bed 600 mm centre height 350 mm Spindle Bore 92 mm turning speed range 3500 rpm Rapid Travel - Longitudinal/Face 20 m/min face stroke 400 mm tailstock quill diameter 100 mm Tailstock Quill Stroke 1150 mm tailstock taper MT 5 Turret (X-Stations) 12 turning diameter over slide 410 mm Additional information Acc. 3-Jaw Chuck 315 mm, tailstok turret 8 P ,chip conveyor, coolant CNC Siemens 840 D

MULTI MOULDERS machine with 7 shafts type SCM SUPERSET 23 PLUS . with SLIDE and RETURN PIECES type MAHROS RP/4 second hand machine CE mark : Yes volt. 380/50 - Composition (7 shafts , 7 independent engines): 1° shaft : lower horiz . motor power Hp 7,5 2° shaft : right vertical . motor power Hp 7,5 3° shaft: left vertical (automatic). motor power Hp 7,5 4° shaft : upper horiz. motor power Hp 10 5° shaft : upper horiz. motor power Hp 10 6° shaft : lower horiz. motor power Hp 7,5 7° shaft : universal 360° . motor power Hp 10 grove table inlet length mm. 2400 feed speed: from 5 to 35 mt./min max. useful working width mm. 230 max. useful working height mm. 120 shaft diameter mm.40 automatic lubrication system weight kgs. 4300

5-fold combined dressing and thicknessing machine, circular saw, milling machine and Slotted Hole Drilling Machine Frommia Type 261 UB Dressing, joining and thicknessing planers Planing width approx. 410 mm Planing thickness approx. 1- 185 mm Dressing table length approx. 1550 mm Thickness table length approx. 700 mm Knife shaft diameter 100 mm with 2 knives Speed of the knife shaft approx. 5200 rpm. 4 feed speeds approx. 5, 9, 12, 18 m/min. Motor approx. 4 kW Drill Drilling depth approx. 120 mm Slot length approx. 200 mm Height adjustment approx. 80 mm Table size approx. 180 x 320 mm Circular saw and milling combination Table size approx. 800 x 600 mm Diameter of saw blades 150 – 300 mm Max. cutting height approx. 95 mm Diameter of the saw shaft at the clamping part 20 mm Speed of the circular saw shaft approx. 3600 rpm. Motor power approx. 1.5 or 2.2 kW  ...

Working range: tube Ø 21,3 – 114,3 mm Wall thickness 2,3 - 11 mm Length: 6-12m Composed of two RFA14 chamfering machines with transport devices between the machines. The task of machines is to chamfer inside and outside both ends of the tubes. The range of diameters of chamfered tubes 21.3-114,3mm and wall thickness of 2.3-11mm in the length range of 6-12m. The task of transport in the area of the chamfering machines is to collect the tubes from the roller table and move them between the chamfering machines. Machine is new, never used.

M. No.: 61 988

High quality machine housing, 548 x 129 x 200cm hoch, KMS, mint condition -90% Special price ! If you have an UID number, we will gladly issue an invoice without VAT Top condition like a demonstration unit The part was removed from a new machine, which can be proven to have run only about 100 hours. The parts have minor signs of disassembly. High quality machine enclosure, length 5480, width 1285, height 2000mm, Consisting of: - Total 12.24 running metres of enclosure, - High quality frame with removable panels, all top painted, - 2 large double doors without locking system with plexiglass, - The back consists of 7 removable elements of plexiglass and sheet metal - The top is made of plexiglass all round - The roof consists of slide-on frames with plexiglass edging. - The elements are all very strong and of high quality - Incl. the many machine feet and the  ...

Weighing fraes machine STEINEL SH5, table 700 / 200 mm, table lashing adjustment pneumatic

with spare screw, high-pressure hose and various spare parts - see pictures

Gernep labelling machine type Labetta 4 / 3 / 10 640 A year of manufacturing: 2013 capacity: 7.500 bph work direction: right to left rotation: clockwise Stainless steel bottom frame instead off standard carbon steel bottom frame Format parts for: - 33 cl Vichy – Longneck – 30 cl BNR ; Neck, front and back label. - 2 different front label format parts 33 cl longneck; - 75 cl Bierre Belge bottle Corked; Neck, front and back label. Air driven glue pumps replaced by electrical driven glue pumps. Introduction wraparound labeler 2020, less wet glue labels since then. Incidental residual wet glue labels ran still May 2022 (remaining stocks) - machine conserved. Machine still in bottle line for conveyor use only, but stilll able to run. The machine is still in production until the mid of November 2023

Skinetta ASK 450 Penalty Banding Machine Machine Purpose The tightening banding machines of the SKINETTA series serve the purpose of tightening individual products or several individual products with polyethylene film. banding (wrapping). In contrast to shrinking machines, the wrapping film is pulled tightly around the container before sealing. This streamlining is the main advantage of the procedure. The result is up to 20% less film consumption. A special advantage of the patented SKINETTA tightening system is the infinitely variable, fine dosing. The sealing (welding) of the film takes place in the smallest of spaces and a clean sealing seam with very small protrusions is created. By connecting a SKINETTAther or SKINETTAshrink heat cover and using a correspondingly wide film, the film protrusion protruding beyond the container can be shrunk laterally. This pre-singing m ...

various spare parts incl.

Brake drum turning and grinding machine - see pictures More: Brake jaw grinding machine SCLEDUM SC 600 see picture below

with FESTO rotary table 360 mm numbers of drilling units: 29433, 29616. 29617, 29797 and 29798

Built in 2001 Size main product max 320 x 400 mm min 148 x 210 mm Size supplement min 320 x 400 mm min 105 x 148 mm Speed max 20.000 c/h min 4.000 c/h Working height feeder 1.100 mm Equipment o main product feeder (shuttle feeder for perfect bound books) o opening station with sucker and sword o 4 insert feeder o delivery to the right

Sorting, feeding and setting machine Cap attachment and screwing station without filling point Fully automatic filling and capping system by feeding a filling unit with filling needle Cap sorter and applicator for lids and caps up to Ø 20 mm Functioning When the machine is started, the caps and lids aligned in the sorter are guided under the attachment and screw heads by means of a feeding system. Cappers include screw fasteners for screw caps and lid pushers for plugs and caps 3 x spiral conveying bowls for bottles, stoppers and caps 1 x Screwing Station 1 x Cap Attachment Station Container height 55 mm Container diameter 20 mm Cap diameter 20 mm More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Type: K728-1xx Model: 720-12-4-4 YOB: 1997 Performance: 18,000 bottles/h Running direction: clockwise feeding: straight parallel Aggregates: Agg 1 PWL 370, AGG 2 PWL 300 Bottle table: cam Guiding: infeed 2 x, 1 x discharge Label L =: min. 40mm, 130mm Bottle diameter: min. 50mm, 110mm Bottle height (H): min. 150mm, 350mm Voltage: 230/400 V Electricity: 3PH/PEN Nominal frequency: 50 Hz Control voltage: 24 V Label: Body, back, neck Machine dimension: L = 2, 40m x W = 2, 30 m without partly overlapping of the unit and discharge extension.

KEMPPI FASTMIG X 450 welding machine built in 2017 in Finland allows for both complex manual welding and efficient mechanised welding using the MIG/MAG method. The specially designed configuration of high-quality components delivers to its user excellent welding quality and performance, with unlimited flexibility for specialised tasks and materials. The KEMPPI FastMig welding machine is the perfect choice for professionals who value speed, precision and extensive machining capabilities. The KEMPPI semi-automatic welding machine consists of the following devices: – welding source: KEMPPI FastMig X 450 – wire feeder: KEMPPI WFX 300 – cooler: KEMPPI Cool X – 4-wheel trolley: KEMPPI PM500 Technical specifications of the MIG/MAG welding machine KEMPPI FASTMIG X 450 Power source - power supply: 3x 400 V (-15% to +20%); 50/60 Hz - maximum current (60%/100%): 450/350 A - ge ...

Vertical Milling Machine RAMBAUDI type RAMMATIC 600 Travel X 1260 mm Travel Y 690 mm Travel Z 600 mm Numerical Command NUM 1060 Cone SA 50 Table size 2000 x 600 mm Year of construction 1991 Voltage 380 V Depth 2500 mm Total height 4000 mm Weight approx 9 T

Manufacturer_ STEINEMANN Model_ OSUS NOVA Working Width: 1300 mm N. of heads_ 2

CITIZEN CINCOM A20 VIPL CNC lathe built in 2006 ensures the highest precision and efficiency in the production process. During machining, the specially designed bed with its rigid structure and high thermal stability effectively reduces the heat impact, resulting in increased machine life and reliability. All of this, combined with a modular design with a reduced number of parts, makes the CINCOM A20 VIPL CNC lathe ideal for various types of production. Workpieces with a maximum diameter of 20 mm and a length of 135 mm are machined in 7 axes by a powerful main spindle which is synchronised with an AC motor, forming an electrospindle. A bushing driven by a separate AC motor is also synchronised with the machine’s main spindle. The operator’s panel consists of an intuitive FANUC 32i CNC controller, a memory card slot and an electronic wheel located next to the monitor designed to ch ...

Used KRUMBEIN TKSM vertical slicing machine. Year of manufacture 2017. Length 1500 mm Width 1390 mm Height 1940 mm Weight 275 kg Max. product size 600 x 600 mm Electricity 230/400 V 50 Hz 3 Ph Power consumption 0.8 kW Voltage 24V DC Description: Within each program, we can freely set a number of parameters such as product diameter and height, slicing speed (in the initial, middle and final phases separately), knife exit speed from the product, knife temperature, slicing depth (complete cut or shallow cut only), knife cleaning frequency. The change of the working system from slicing round to lengthwise products is done manually Performance depends on the type of products to be sliced, their structure and temperature, and the number of portions. Double blade system for gentle and precise cutting. Heated blade. Quick return on investment due to minimal human labo ...

Manufacturer _ BONGIOANNI Model_ 1300 Features_ ARTIGLIO Carriage with 5 hydraulic clamping; Hydraulic Advancing; Chain Loading at 4 ways with hydraulic arms; Unloading Rollers System; Reverse Feeding Chain; Grinder manufactured by Vollmer.

Type MTY 8-70 Grinding wheel motor 250 W. Sawblade diameter 80 – 700 mm. Diamant grinding wheel diameter 125 mm. Total weight 29 kg. Video: abc://abc.youtube.com/watch?v=kYPLaZZwVtA&feature=youtu.be

Used machine for production of shortbread cookies with filling model MAX DROP CNC DUO Manufacturer HASBORG Rakszawa Poland Year of production 2009 CE mark Installed power: 2 kW power supply: 3 x 400V two-head - head 1 = two rollers, shortcrust / gingerbread / sponge-fatty pastry - head 2 = two rollers, mobile station attached optionally, fruit fillings, cream fillings, sprinkles 9 nozzles for exchange of dozens of tips squeeze cakes (plus with lowering) curly extruded cookies (plus with lowering) curly cookies curly cookies with lowering, filled cookies long cookies continuous pouring optional: string cut cookies With this compact machine, a very wide range of different pastries can be produced, including filled pastries in the center. The MAX DROP CNC DUO is equipped with two tanks for dough (e.g., two colors) or dough and filling. It includes a bar with  ...

Used MAX DROP single head shortcake machine. IMPORTANT: the machine was equipped with a bar for lubricating the tops of the dough with fruit filling. Manufacturer HASBORG Rakszawa Poland Year of production 2007 CE mark MAXDROP is a technologically advanced, multifunctional and single-head machine designed for the production of cakes. The machine is adapted to work with steamed, shortcrust, coconut, meringue, sponge cake or muffins with pieces of fruit. Its purpose is to dispense many types of cakes, such as single-color cakes, meringue, spice cakes, coconut cakes, dumplings, matzahs or puff straw and sponge cake tops. MAXDROP is equipped with a head that allows working with semi-liquid and hard cakes. Special rollers, which have milled notches, are mounted in the head. The speed of the rollers is adjustable. Part of the standard equipment of the machine is a bar with rotatin ...

Humpback welding machine year 1952 25 kW 500 V All data without gewaehr

Projection welding machine Year of construction: 1979 Manufacturer: Roth electric Type 126 P 125.4 Rated current at 50% ED: 16.0 kA Rated output at 50% ED: 160 k Nennspennung: 380V/50 Hz All information without guarantee

Overhaul, retrofit, control conversion of all ELB-Schliff grinders with Granitan machine bed. Available with or without enclosure.

Loeser KS 350 Contact belt grinding machine (conventional) grinding belt length 3500 / 4000 mm x 50 mm motor 3.5 / 4 kW n

Technical information Swing over bed 420 mm Distance centre tot centre 1000 mm Max longitudinal travel Z-axis 1028 mm Max cross travel X-axis 335 mm Spindle coneA2-6 Dia of spindle bore 56 mm Power on the spindle20/25 hp Number of speeds16 - 4000 rpm CommandMazatrol Cam T3 Total power needed18,5 kW - 32,9 kVa Length 3734 mm Width 1893 mm Height 2401 mm Weight 4400 kg Toolchanger yes Number of tools 16x - rotating yes milling tools C-axis Robo flex automatic loading system tooling included Measuring arm included MAZATROL CAM T-3 CNC Accessories Tailstock, Evoquator, Tool Attachments, Presetting Machine weight 4700 kg Axis C Yes

Description Filler Handtmann model VF300 is a computer controlled vacuum filler offering very high performance with innovative technical solutions applied. Model VF300 is ideal for the production of meat products and find it applies in large and small manufacturing plants. The device is a very accurate-allows you to achieve the highest quality of the product. Handtmann applied in your device pneumatic lift mechanism for automatic loading. Specification: Brand: Handtmann Model: VF300 Volume: 300 L Dimensions: 2030 x 1750 x 1400 (mm) Power supply: 400V 50 Hz 3N Power: 6.5 kW

Description BINDER dosing machine is designed for dosing of liquid and pasty products to finished bags. Dosing machine automatically opens and fills the bag. Specification: Brand: BINDER Model: 871/1 Type: Filling Machine Size: 2200 x 1600 x 1300 (mm) Power supply: 400V 50 Hz 3N Power: 4kW Tank capacity: 75 l Tank pressure: 4 bar Max. temperature: 120 ° C Control: SIEMENS Control Panel Material: stainless steel/steel

Mori Seiki NT 1000 multitasking lathe :::SPECIFICATIONS::: CNC Model: Mori Seiki - CNC Version: Mapp - Spindle Nose: ASA 5 - Spindle Power: 11Kw - Main Spindle Speed: 6000 Turning diameter: 370mm - Self-centering diameter: 210mm - Bar passage: 42mm - Turning length: 424mm - Number of tools: 90 Tool holder: CAPTO C4 Spindle speed: 12000 X-axis travel: 380mm Y-axis travel: +105 -105mm Z-axis travel: 460mm Swivel B-axis travel: +120° -120° degrees Rapid feeds linear axes X Y Z: X 40 Y 40 Z 50m/min High refrigerant pressure: yes Pressure value: 50bar External tank system with filter: yes Number of Tool Turrets: 1 Number of first turret tool slots: 10 Number of fixed tool positions in the first turret: 10 First Turret X-Axis Travel: 155mm First Turret Z-Axis Travel: 610mm Sub-spindle: yes Sub-spindle speed: 5000 Sub-spindle power: ...

Hohner economy 13; good condition; cleaned and geüprüft; Book thickness max. 13 mm. Block or saddle stitch. We are pleased at this point the note that all offered machines are in our unrestricted ownership or access and are available in our warehouse. Tours and demonstrations are possible by appointment at our premises. Gladly we inform you also about our complete inventory because only a portion of our portfolio is represented.