wig used for sale

A welding cell including robot and welding machine is available. Table dimensions X/Y: 1800mm/900mm, max. workpiece height: 800mm, switching hours: 5250h, operating hours: 1244h. 1) Robot Fanuc ARC Mate 100iBe, year of manufacture: 2006, payload: 6kg, max. reach: 1373mm, repeat accuracy: +/-0.08mm, weight: approx. 238kg. 2) Welding machine Fronius Magic Wave 4000, year of manufacture: 2006. On-site inspection is possible.

A C H T U N G_____S o n d e r p r e i s ! ! ! TIG Welding Device Manufacturer Artec fully ready for use with all the no-fable lifts. Can also be used as an electrode device. Welding current 350 ampere DC, no alternating current! Weight approx. 200kg Geraet under electricity ready for use Immediately available Lorch Dalex Messergrießheim Cloos Special price

Automatic double copy milling machine - longitudinal copy milling machine Manufacturer: Wigo Model: 1075 Working length: Workpiece with straight end faces .. 1300mm Wersktück with rounded end faces .. 1000mm Working width: max. 200mm Working height: max. 130mm Feed continuously 0.5 - 12 m/min Milling units: 2 x 4 KW Hydraulic unit: 1.1 KW Additional 2 milling unit on the right side. Clamping cylinder pneumatic: 2 pcs.

Machine Type: TIG Inverter Welding Machine gas-cooled DC system Make Jäckle Type TIG 201 i DC Connection voltage 1 x 230 Volt Adjustment range 3 – 200 amps Duty cycle 35% ED at 200 amps 60% ED at 180 amps 100% ED at 150 amps Infinitely variable current adjustment max. weldable material thickness steel / stainless steel = 6 mm Cooling inverter by built-in fan Cooling burner gas-cooled Design of portable assembly system Fuse protection 16 amps Dimensions L x W x H 600 x 255 x 440 mm Weight 24 kg Age approx. 10 years Condition workshop-tested, very good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece TIG torch WHL 17, 4 mtr. long 1 piece of ground cable 1 piece pressure reducer 1 pair of TIG gloves 1 piece spare parts box cpl. Equipped 1 piece of instruction manual Warranty ...

TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Jäckle, water-cooled TIG welding machine -Type: TIG 301i DC -Welding power: max. 300 A, see nameplate -Cooling device: KG 2 -Accessories: including ground cable, hose package -Dimension: 730/620/H1180 mm -Weight: 73kg

Three welding machines are available. (1) Castolin+Eutectic CASTOWIG 150 G, power supply: 5A/10V to 150A/16V, max. short-circuit current: 0.15kA, weight: 50kg. (2) MIG O MAT WIGSTAR 250i, welding current: 10-250A, duty cycle: 100% at 160A, 60% at 200A. (3) Lorch SEW 200N, voltage: 400V, welding current: 230A, cooling: gas-cooled. (4) Heberle stud welding systems cd System 2010, connected load: 0.6kVA. On-site inspection is possible.

TIG Welding Machine, Electric Welding Machine KESTRA Type TIG 350 AC/DCE Welding MachineFabr. No. 09720693 Year of construction approx. 1985Power 350 Amp. = 60 % EDExsetting range 3 steps and fine adjustmentCurrent type AC / DCNet connection 400 volts, 50 Hz, 32 Amp. Plug- 4 meter hose package with TIG torch- 2 stroke / 4 stroke welding device- Water-cooled- Gas pressure reducing valveSpace requirement L x W x H 1050 x 560 x 900 mmWeight 250 kgThe welding test gives good results when welding stainless steel with

Cross milling machine Wigo 1016 Working length 750mm Maximum milling height 150 mm Spindle diameter 50 mm 15kw spindle motor 3kw Hydraulic Pump Motor Pneumatic material pressure Pedal control machine dimensions 1450 x 1600 x 1800h mm

Key data: 300 mm

Radial saw Wigo Pull saw Saw blade diameter 300 mm Cutting height maximum 85 mm Cutting width maximum 650 mm Motor power 2.2 kW Sawing unit swivels by 0°- 90°- 0° or 180° overall Height-adjustable sawing unit Mounted on machine table Total dimensions 2800 mm x 1250 mm x H 1400 mm

Key data: 2

Wigo Copy Milling Machine Type: 1075 1 milling motor each on the right and left 5.5 kW each Spindle diameter 30 mm Milling spindles run in the same and counter-rotation Running direction can be switched Milling process via scanning with thrust ring Working length max. 1400 mm Working width max. 210 mm Working height max. 90 mm 2 pneumatic clamping cylinders from above 2 x pneumatic side pressure with 2 straight milling heads milling height 50 mm Dimensions Length 3200 mm x W 1200 mm x H 1600 mm Weight approx: 1000 kg

A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A ...