welding table used for sale

Wire electrode, aluminum welding wire, aluminum welding rod made of aluminum-magnesium alloy -various manufacturers: -7x Elisental 1.2 mm SG-AlMg5 -1x MTC 1.0 mm AlMg5 -6x ALCAN 1.2 mm S-ALmg 5 -1x Thyssen 1.2 mm AlMg4.5Mn -Weight: 7 kg/roll Price: per piece

Inv. Num. : 9046 Type: ES 200D Producer: Motoman Created: 2010 Parameters: Maximum arm reach: 2651 mm Number of axles: 6 pieces Maximum load capacity: 200 kg Machine weight: 1130 kg

KUKA KR 30 L16-2 robotic welding station was built in 2017 in Germany by KUKA Roboter GmbH. The welding station has been specially designed for the precision welding of structural components with even the most complex geometries. All the necessary equipment and machinery with the best technical specifications were integrated inside a cell with service doors and light curtains. This created a complete, fully-automated system that significantly speeds up production, increases weld repeatability and reduces downtime to a minimum. The machining process is performed by a KUKA 6-axis robot, distinguished by, among others, its clever design and robust arm with an increased range of movement. The arm’s reach of 3102 mm and a payload of 16 kg enable the welding of large and complex structures, while maintaining a highly dynamic and repetitive process. During automated welding, dynamic and ac ...

Welding manipulator Type: P82 14VF Hydraulic lifting and tilting Electric turning MANIPULATOR: yes Capacity: 9,5 ton

FANUC M-710iC/12L robotic welding station was built in 2014 in Japan by Fanuc Corporation. All components of the welding station are brand new. It has never been in operation after purchase. The FANUC M-710iC/12L is a state-of-the-art welding system designed for automated arc welding of structural components with even the most complex geometries. The machining process is performed by a FANUC 6-axis robot, distinguished by, among others, its clever design and robust arm with a large range of movement. The arm’s reach of 3323 mm and a payload of 12 kg enable the welding of complex workpieces, while maintaining a highly dynamic and repeatable process. Directly on the machine body, a reliable LINCOLN ELECTRIC wire feeder is placed, which ensures dynamic and accurate feeding of the welding wire. The welding torch, in turn, is automatically cleaned at predetermined intervals by the ABICOR ...

welding current: max. 250 A open-circuit voltage: max. 66 Volt connected load frequency: 400 V weight: 65 kg Dimensions (LxWxH): 900 x 500 x 750 mm MIG/MAG gas-shielded welding machine: incl. 3m hose package. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-operated spot welding machine, roller seam welding machine, projection welding machine -Manufacturer: Dalex, spot and projection welding machine with roller table -Type: PMS 14-4 -Rated power: 200 kVA -Protrusion: 740 mm -Operation: via foot pedal -Individual components: see photos -Submission/Price: complete -Dimensions: Machine 2120/890/H1680 mm / Table 2730/800H1055 mm -Weight: 966 kg / 70 kg

Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-operated spot welding machine, roller seam welding machine, projection welding machine -Manufacturer: Dalex, spot and projection welding machine with roller table -Type: PMS 14-4 -Rated power: 200 kVA -Protrusion: 740 mm -Operation: via foot pedal -Individual components: see photos -Submission/Price: complete -Dimensions: Machine 2120/890/H1680 mm / Table 2730/800H1055 mm -Weight: 966 kg / 70 kg

Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, lowering unit for ultrasonic welding machines, lowering unit - flatbed, lowering column -Manufacturer: Nucleus, Absen column 35 for ultrasonic welding machines -Eco FR361101 -Servo motor: Dunkermotoren GR 42x40, voltage 24 V -Receiver: Shaft Ø 20 x 18 mm see photo -Dimensions: 270/230/H85 mm -Weight: 2.5 kg

A height-adjustable turning device PETec for welding work is available. Rotation function: 360°, max. load capacity: 1000kg, height adjustment range: 500mm-2000mm, column spacing range: 500mm-3000mm. An on-site inspection is possible.

Various spot welding machines and a Dalex cooling unit are available. 1) 2x spot welding machine Dalex PL 80-1, rated power (50%): 80kVA, max. welding power: 245kVA, max. short-circuit current: 35kA, primary voltage: 380V, open-circuit voltage: 8.44V, cooling water quantity: 10l/min, electrode force range: 100daN-600daN. 2) Spot welding machine Dalex PMS 10/1, rated power (50%): 32kVA, max. primary short-circuit current: 30kA, primary voltage: 380V, open-circuit voltage: 4.6V, electrode force range: 65daN-390daN. 3) Spot welding machine Dalex SL 16/EA, rated power (50%): 16kVA, connected load: 37kVA, secondary short-circuit current: 17kA, electrode force range: 17daN-278daN, open-circuit voltage: 3.6V, weight: approx. 200kg. 4) 2x spot welding gun Dalex RS 11 and 3136. 5) Water cooling unit Dalex DRF 4, year of manufacture: 1989, refrigerant: R22, filling weight: 3.5kg, volume flow: 1.3m ...

Key data: 16 kp, 200 , 390

Rated power at 50%ED: 16kVA Short-circuit current: 20.7kA Electrode force: 65-390daN / single stroke Throat: 200mm --- Welding control: MPS 10beta (5 times, 8 program) --- Incl. additional options: - Footswitch - Transformer tap changer 8-way + main switch - Machine table --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Manufacturer: Fanuc Model: ARC Mate 100ic 8L Year of Manufacture: 2015 Type of Machine : Welding Robot Condition: Used Technical Specifications - Number of axes: 7 - Reach: 2,200 mm - Controller: Fanuc System R-30iB - Welding system: Kemppi KempArc Puls 450 System Dimensions - Length: 11,000 mm - Width: 5,000 mm - Height: 2,500 mm - Robot rail travel: 7,500 mm Included with the Machine - Full protective enclosure of the system as shown in photos - Rotary positioner (Drehtisch) included - Software for offline programming included - On-site operator training available on request - Dismantling support provided - loading assistance available on site Find more here - .ucymachines/ Contact us at - sales@ucymachines

15 identical welding machines are available. Type: cool41 U31, standard: IEC 60974-1, -2, -10 C.L.A, mains voltage: 400V, frequency: 50/60Hz, protection class: IP23, power consumption P min: 0.9kW, cooling capacity P max: 0.35MPa (3.5bar), max. current consumption: 2.5A, length: 539mm, width: 210mm, height: 415mm, weight: 22kg. Control: Comfort 2.0 with intuitive operation via click wheel, pulse spot normal mode continuously adjustable (especially for TIG welding), pulse pause ratio (balance) adjustable for example from 10-90%, Hz and kHz pulses up to approx. 15kHz, ActivArc technology dynamic arc control to ensure constant performance despite distance fluctuations and to prevent electrode sticking, improved root and penetration quality, spotArc Spotmatic functions for spot welding and tacking, 2-stroke and 4-stroke mode depending on torch trigger operation, manual metal arc welding ofte ...

230 V 16 A Adjustment range 10 A 12 V 140 A 20 V Hose package Pressure reducers Ground cable Length 0.6 m Width 0.3 m Height 0.6 m Weight 40 kg Color: Green Unaudited

CONTROLS   electronic controls DIMENSIONS / WEIGHTS   space requirements -left/right-: 874 mm   space requirements -front/back-: 1250 mm   total height: 1570 mm   total weight approx.: 360 kg Software update 2009

Swiveling welding rotator, rotary tilting table, container rotator, welding rotator, welding rotator, welding fixture, welding rotator, welding rotator and tilting table, welding rotator, welding rotator tilting table -Manufacturer: HEINRICHSGLÜCK, swiveling welding rotator -Type: DK1.000-P800 -Load capacity: see photo of the nameplate -Control: via foot pedal -Three-jaw chuck: Ø 380 mm, three-jaw chuck bore Ø 150 mm -Base plate: Ø 800 mm -Speed: 0-1.5 rpm Right/Left rotation -tiltable: via geared motor -Transport dimensions: 1430/1040/H1175 mm -Weight: 913 kg

Gas metal arc welding machine, arc welding system, MIG/MAG welding system, pulse welding system -Manufacturer: Esab, PULS MIG/MAG welding machine -Type: AristoMig 500W -Max. welding power: 500 A -Features: Water-cooled -Wire feeder case: 4-roller drive Esab type AristoFeed 48-4 -Quantity: 3x Esab, PULS MIG/MAG welding machine available -Price: per piece -Dimensions: 1200/700/H1730 mm -Weight: 210 kg

Gas metal arc welding machine, arc welding system, MIG/MAG welding system, pulse welding system -Manufacturer: EWM, PULS MIG/MAG welding machine -Type: LUD320W -Max. welding power: 500 A -Features: Water-cooled, remote control -Wire feeder case: HIGH-SPEED integral 4X4S 4-roller drive -Dimensions: 1370/820/H1500 mm -Weight: 242 kg

This 4-axis LASAG KLS 246 CL60 was manufactured in 2008, a laser welding machine with enclosed class 4 safety cabin and camera window. It features a linear-motor XY table (X 400 mm, Y 100 mm), Z travel 300 mm, and a direct-drive rotary table for precision handling. L2-CNC control with SERCOS and a 15-inch touchscreen, plus dedicated water chiller included. Consider the opportunity to buy this LASAG KLS 246 CL60 Laser Welding Machine. Contact us for more information.

Gas metal arc welding machine, arc welding system, MIG/MAG welding system, pulse welding system -Manufacturer: Esab, PULS MIG/MAG welding machine -Type: LUD320W -Max. welding current: 320 A -Features: Water-cooled, remote control -Wire feeder case: Esab MEK 44 C 4-roller drive -Dimensions: 1130/640/H1630 mm -Weight: 174 kg

Features: 1) KUKA KR 30 HA industrial robot, max. reach: 2033mm, rated payload: 30kg, max. additional load arm + wrist: 35kg, max. total load: 65kg, number of axes: 6, position repeatability: +/-0.05mm, path repeatability: +/-0.16mm, operating temperature: 10-55°C, protection class: IP64, IP65 (central hand), connected load: 7.3kVA, robot installation area: 850x950mm, weight: 665kg, 2) Trumpf TruDisk 8002 (6000) laser source, connected load: 39/40kVA, laser type: ND:YAG laser, weight: 2t, 3) KLH L 36.HL22 cooling unit, rated voltage: 3x 400V, refrigerant: R407c, refrigerant charge: 18kg, permissible operating pressure: 25bar, max. operating current: 31A, 4) filter unit. An on-site inspection is possible.

Robot stud welding robot for thread M5 (convertible) KUKA KR 180 KRC2 complete Control: KRC2 Number of axes: 6 Max. load capacity: 180 kg Max. working range: approx. 2700mm Year of Make: 2003 Scope of delivery: robot, controller, cable, teachpanel, circuit diagrams, stud welder In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Progress M-System Mesh Welding Machine, Type EVOLUTION 2012 Complete mesh welding system for the production of customised reinforcement mesh from straightened wires. Main Components MMR straightening machine with 6 wire lines SWR welding machine with 6 welding heads Technical Data Maximum mesh size: Width: up to 3,500 mm Length: up to 9,000 mm Wire diameters: Longitudinal and cross wires: 6, 8, 10, 12 and 16 mm Mesh dimensions: Maximum width: 3,500 mm Maximum length: 9,000 mm Minimum width: 500 mm Minimum length: 1,000 mm Bar dimensions and accuracy: Maximum bar length: 9,000 mm Minimum bar length: 500 mm Bar length tolerance: ±5 mm Bar placing accuracy: ±10 mm Description The Progress M-System EVOLUTION 2012 is designed for the flexible production of customised reinforcement mesh in a wide range of grid patterns, dimensions and wire diameter ...

Swiveling welding rotator, rotary tilting table, container rotator, welding rotator, welding rotator, welding fixture, welding rotator, welding rotator and tilting table, welding rotator, welding rotator tilting table -Manufacturer: PEMA, swiveling, hydraulically height-adjustable welding rotator -Type: 1500AHM -Load capacity: 15000 N -Control: with remote control -Base plate: Ø 850 mm -Speed: 0.02 - 1.6 rpm Right/Left rotation -tiltable: hydraulically -Height adjustment: hydraulic -Transport dimensions: 850/1650/H970 mm -Weight: 820 kg

Offered is a robot-assisted laser welding system with fiber laser. Robot radius approx. 2000mm on linear axis, robot manufacturer: laser type: ytterbium fiber laser YLS, number of axes: 6 + linear travel axis, application: laser welding and surface processing, extraction: Plymovent extraction arm, control: KRC. Equipped with YLS laser source, linear axis, processing optics, Plymovent extraction, system table, control cabinet. Accessories: wire feeder: EWM Phoenix Drive 4 Rob MF. Weight: approx. 3500kg, overall dimensions X/Y/Z: approx. 5000mm/3000mm/2800mm. Inspection possible by arrangement.

This 6-axis OTC Daihen EASY ARC V02.04 was manufactured in 2019. It features a robot working range with a radius of 1,445 mm and a maximum payload of 6 kg. The integrated welding table measures approximately 2,200 mm in width and 1,100 mm in depth, with a load capacity of around 1,000 kg. If you are looking to get high-quality welding capabilities, consider the OTC Daihen EASY ARC V02.04 welding robot we have for sale. Contact us for further details.

Welding Fumes Extractor SAF AZUR Voltage: 220 V mono Width: 800 mm Depth: 1200 mm Total height: 1200 mm Tubing height: 2000 mm

Welding Fumes Extractor CAPTAIR type 100 Year of construction: 1995 Voltage: 380 V Tubing Length: 3000 mm Width: 600 mm Depth: 500 mm Total height: 1300 mm

Equipment: integrated Leica 16x/14B binocular microscope with 6.8 eyepieces, protective viewing window, digital panel, emergency stop button, key switch, status indicator LED displays, two integrated gas pressure gauges with brass connections and hoses. With Rofin Sinar laser, voltage: 230V, PE, frequency: 50Hz, max. current consumption: 16A, laser safety class: 4, the laser requires new flash lamps. An inspection on site is possible.

Working range Mesh width (cross-wire length) max. 1,600 – 2,500 mm Distance between the outermost longitudinal wires max. 2,400 mm Number of longitudinal wires, depending on configuration max. 26 Longitudinal wire spacing: 150 mm Longitudinal wire diameter 4.0 – 8.5 mm Cross-wire spacing min. 50 mm, freely programmable in increments of 0.1 mm above this range Cross-wire diameter 4.0 – 8.5 mm Working speed: max 150 cross wires/min Scope of supply: line wire spool pay off to mesh paket stacking system

Working range Mesh width (cross-wire length) max. 1,500 – 3,080 mm Distance between the outermost longitudinal wires max. 2,750 mm Number of longitudinal wires, depending on configuration max. 64 Longitudinal wire spacing, fixed 50 mm with single bars and 100, 150, 200mm with double wire Longitudinal wire diameter: a. 4.0 – 12.0 mm single wire and B. 4.0 – 9.0 mm Double Wire Cross-wire spacing min. 40 mm, freely programmable in increments of 0.1 mm above this range Cross-wire diameter 4.0–12.0 mm Mesh length: up to 14.000mm

ALPHA LASER ALM 300 laser welding machine was built in 2019 in Germany by ALPHA LASER GmbH. The machine is used for the precision welding of workpieces that require high accuracy, i.e. moulds, dies, tools and machine parts. The process involves spot fusing of the material by means of a concentrated laser beam with high energy density. This solution makes it possible to obtain highly accurate and robust welds with reduced thermal distortion at the same time. ALPHA LASER ALM 300 is equipped with a movable work head, which enables convenient operation even in hard-to-reach areas of the workpiece. The operator controls its position in the X,Y,Z axis by means of a joystick located on the machine arm. The welding process parameters are entered from the membrane keyboard panel or by means of a multifunctional foot switch control. The ALPHA LASER ALM laser beam welding machine weighs approxim ...

This 6-axis FANUC ARC Mate 100iC welding robot was manufactured in 2011. Ideal for precision welding tasks, it offers robust construction and reliable performance. If you are looking to get high-quality welding capabilities, consider the FANUC ARC Mate 100iC machine we have for sale. Contact us for more information.

Laser welding machine manufactured in 2014. This RONDA IMPIANTO CHIUSURA E SALDATURA LASER is designed for tube processing, currently configured for TIG welding and tack welding operations. It features a tube diameter range of 219 – 1,500 mm and a tube thickness of 3 – 12 mm. The machine operates with 8 pushers and is controlled from an external workstation. If you are looking to get high-quality welding capabilities, consider the RONDA IMPIANTO CHIUSURA E SALDATURA LASER machine we have for sale. Contact us for further details.

A handheld fiber laser welding machine Sitolaser with a Reycus laser source is available. Laser power: 1000W, cooling: water, welding capacity steel/copper/aluminum: 4mm/2mm/2mm, min. sheet thickness: 0.2mm, wavelength: 1080nm. Machine dimensions X/Y/Z: approx. 1200mm/650mm/1200mm, weight: approx. 250kg. Including various copper nozzles, spare lenses and heavy-duty casters for mobility. The item is a demonstration unit with few operating hours. Documentation available. An on-site inspection is possible.

Offer 26161 Technical data: - Rated power at 50% ED 25 kVA - Max. welding power 107 kVA - Adjustable projection 140 - 500 mm - Welding values - sheet steel 6 + 6 mm - Brass sheet 3 + 3 mm - Aluminum sheet 1.2 + 1.2 mm - Electrode force adjustable 17 - 278 daN - Required air pressure 6 - 10 bar - Cooling water volume 8 l/min - Drive 400 V - Space requirement approx. W 670 x H 1250 x D 1600 mm - Weight approx. 240 kg - with : - DALEX MPS 200 welding control - E. Foot Switch

Trumpf TruLaser Robot 5020Year of manuf. : 2010 ____________Description:TruDisk 3302 laser system:- TRUMPF TruDisk 3302 with a beam quality of 8 mm mrad:- Output power of 3.3 kW at the workpiece:- Laser system with 1 cavity:- Beam delivery system comprising an optical assembly for a single optical path, a fast switch (50 ms switching time) and a pilot laser including electrical control:- Integrated power supply and real-time capable control system for the evaluation and visualisation of operational data:- Fast laser power control:- TruControl 1000 control system:- Storage capacity for 199 laser programmes:- Safety monitoring in accordance with laser safety class 1, including a central safety lock:- Protection class IP54:- 10.4 panel computer with TFT touchscreenExtension of the beam path:Plus 1 additional laser light cable output, including interface card:consisting of::# Optical a ...

This used SCHLATTER MG line was specially developed for the economical production of light and heavy standard bearing mats in medium and large series. The line wires are drawn directly from spools, while the cross wires are precisely straightened, cut to length and fed into the welding system from a large magazine. This concept enables fast changeover times and ensures maximum flexibility – a clear advantage when tapping into new markets. On request, and for an additional charge, the relevant straightening machines for the cross wires are available, as well as a comprehensive range of accessories, spare parts and a wear parts pack.

Offer 19370 Technical data: - Volume flow approx. 1447 m³/h. - Negative pressure 2200 Pa - Filter area 9.5 m² - Drive power 400 V / 2.2 kW - Required space W 1750 x H 2150 x D 900 mm - Weight approx. 350 kg

This 3-axis ALPHA LASER ALM 300 was manufactured in 2019. It features a powerful Nd:YAG laser with an average power of 300 W and a peak pulse power of 9 kW. The movement range is 120 × 110 × 800 mm, allowing for versatile applications. If you are looking to get high-quality laser welding capabilities, consider the ALPHA LASER ALM 300 machine we have for sale. Contact us for further details.

A mobile welding fume extraction unit is offered. Max. air volume flow: 3000m³/h, max. pressure: 3000Pa, motor power: 1.5kW, separation efficiency: >=99%, noise level: approx. 70dB(A), filter cleaning: automatically shaken off, filter type: washable filter cartridges, control system: digital control with display. Equipped with filtoo mobile extraction unit, year of manufacture 2022, incl. 3000mm extraction arm, spark protection screen. Inspection possible by appointment.

Offer 26163 Technical data approx : - Max. workpiece diameter 80 mm - Projection 70 mm - Welding torch tripod adjustable in X, Y, Z - Tripod method by handwheel 500 mm - Projection tripod 70 mm - Center width 600 mm - Tailstock with pneumatic pressure tip - 3 jaw chuck 100 mm - Handheld remote control - Connection cable - Pneumatic connection - Table base W 2000 x H 850 x D 700 mm - Space requirement approx. W 1150 x H 650 x D 500 mm - Weight approx. 200 kg

An automatic Weil tube welding system with rounder, tube transfer, end processing and Trumpf TruFlow laser unit is available. Tube diameter range: 80mm-250mm, material thickness range: 0.4mm-1mm, max. tube length: 1000mm. Documentation available. An on-site inspection is possible.

Bodor AQU3000 Handheld Laser Welding Machine – 3000 W For sale is a Bodor AQU3000 laser welding machine with 3000 watts of laser power. The device is located in Germany and is available immediately – no long delivery times or waiting times for an import. The welding machine is still in its original packaging. The AQU3000 combines welding, cutting and, if necessary, cleaning in one compact system. Modern fiber laser technology achieves high-quality weld seams with low distortion and significantly reduced post-processing effort. Compared to classic MIG and TIG methods, significantly higher working speeds are possible. Technical data: Manufacturer: Bodor Model: AQU3000 Laser power: 3000W Fiber cable length: 10m Operating voltage: 380 V Cooling: Water cooling Welding thickness mild steel: up to 8 mm Welding thickness stainless steel: up to 8 mm Cutting fun ...

Welding robot manufactured in 2009. This CLOOS Romat 320 features an integrated 2-axis workpiece positioner with a vertical rotary turntable plate and an L-shaped tilt axis. It includes a full safety perimeter booth with optical safety light curtains and a dual pendant remote control box for station control. If you are looking to get high-quality welding capabilities, consider the CLOOS Romat 320 machine we have for sale. Contact us for further details.

current intensivity: 1,2 / 0,5 A wire dia.: 0,8 - 1,6 mm IP protection class: IP 43 dimensions: 250x210x190 mm speed: 1 - 25 m/min weight: ca.7,2 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Schirmacher high-frequency sliding-table welding machine is available. Table dimensions X/Y: 750mm/550mm, max. pressing force: 20kN, generator output: 10kW, operating frequency: 27.12MHz, control system: Siemens. Documentation available. An on-site inspection is possible.

Manufacturer: KUKA Year of manufacture: 2014 Model: KUKA flexible Cube Type of machine: Welding robot Drawing number: 89.009-14 Weight: 2900 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

Ref.nr. 00917 Name of the system: Spot welding machine Application: Sheet steel processing, metal construction, series production and welding technology Manufacturer: Dalex Model PMS 14 - 4 Year of construction unknown DALEX, spot welding -200 KvA 50Hz 400V Technical data: Make: DALEX Type: PMS 14-4 Process: Resistance spot welding Rated power: 200 kVA Max. power: 623 kVA Projection: 500 mm Electrode force: 80 – 1,200 daN Weight: 700 kg Condition under power Can also be demonstrated