welding table used for sale

table length: 590 mm table width: 590 mm table load: 200 Kg table turning speeds: 0,23 - 2,3 U/min table height: 650 mm total power requirement: 0,55 kW weight of the machine ca.: 600 Kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 450 mm table load: waagerecht 300 Kg table load: senkrecht 150 Kg table turning speeds: 0,2- 2 U/min voltage: 230 V / 50 Hz total power requirement: 0,55 kW weight of the machine ca.: 80 KG dimensions of the machine ca.: 0,65 x 0,5 x 1,0 m • unused stock machine • manual tilt adjustment • Start-Stop by foot switch • with CE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Welding turntable make ART Welding type AP 6Serial -No: 2016066 Year 2016Technical specifications:Load capacity: 600 kgWorking table diameter: 800 mmTilt Angle:-95° / +15°Tilting speed: 0.35 rpm.Speed: 0.09 - 0.9 rpm.Drive power: 1.5 kWWeight approx.: 700 kgDimensions approx.: 1100 x 570 x 1300 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Welding table 3000 x 1500 mm

Welding table 5 x 5 meter

Welding table 5 x 5 meter

surface area: 2,5 x 5 meter weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams

surface area: 5 x 5 meter two sections of 5 x 2,5 meter which can be bolted together weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams

surface area: 5 x 5 meter two sections of 5 x 2,5 meter which can be bolted together weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams

surface area: 5 x 5 meter two sections of 5 x 2,5 meter which can be bolted together weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams

surface area: 5 x 5 meter two sections of 5 x 2,5 meter which can be bolted together weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams

surface area: 5 x 5 meter two sections of 5 x 2,5 meter which can be bolted together weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams

surface area: 5 x 5 meter two sections of 5 x 2,5 meter which can be bolted together weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams

surface area: 5 x 5 meter two sections of 5 x 2,5 meter which can be bolted together weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams

surface area: 5 x 5 meter two sections of 5 x 2,5 meter which can be bolted together weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams

surface area: 5 x 5 meter two sections of 5 x 2,5 meter which can be bolted together weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams

surface area: 5 x 5 meter two sections of 5 x 2,5 meter which can be bolted together weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams

surface area: 2,5 x 5 meter weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams

Weber, Masch. No. 1109226, orbital riveting machine with RT-stand Motor M 631 / 4 0.18 kW 1360 RPM KMT - APK T-3-S-60-Z SN 307 89 01 Riveting time - adjustable 0.15-3 s Control - Siemens Simatic S 7-200 External dimensions 30 x 20 x 86 cm - riveting machine Panel 50 x 40 x 30 cm More info and details. Photos upon request I am retailer offers to similar machines interested in financing through leasing or hire-purchase request send data protection

Unused

Unused

Unused

Unused

Unused

Unused

Unused

Unused

Unused

Compressed air supply: 6-8bar, connected load: 30kVA, length: 3280mm, width: 4820mm, height: 2385mm, weight: 2t, operational hours counter: 485h, with documentation.

Railings and grilles of 500 mm -1200 mm in height can be chiseled and 3800 mm in length. the grid can be rotated to any angle to shit.

Pallet with welding electrodes and welding wire approx. 1,000 kg total Net price 400,00 E

max center distance: 3000 mm One driven unit One non-driven unit Both units are movablenbsp; max swing: 1850 mm

Description: Payload: 4kg Robot control: YA-1QAR42 Welding manipulator: YA-1RJB11 MYFRA PEDIA cooling system 2x manually rotating welding tables Safety cage Approx. Onsite Dimension. (l x w x h): 4,000 x 4,000 x 2,300 mm, weight approx.: 700 kg

Fronius magicwave 2600, with wire feeder can be used for the robot welding. Machine is in great working condition, equipped with longines controls, wire feeder and welding gun connections for the robots.

200 WATT Laser Welding Machine Machine can be seen in working condition

weight max.: 5 t workpiece diameter: 150 - 1800 mm Turning speed: 70 - 1200 mm/min roll diameter: 250 mm total power requirement: 1 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,8 x 1,5 x 1,0 m • demonstration unit • unused vessel turning unit, • with rubberised rolls, manual adjustable roller-spacing, • one device with twin drive with adjustable rotational speed. • with CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 20 t workpiece diameter: 300 - 3600 mm Turning speed: 70 - 1200 mm/min roll diameter: 350 mm Wheel width: 110/175 mm total power requirement: 3 kW weight of the machine ca.: t dimensions of the machine ca.: 2,5 x 1,5 x 1,0 m • demonstration unit • unused vessel turning unit, • with steel rolls, manual adjustable roller spacing, • one roller unit with twin drive with variable adjustable rotational speed, • one roller unit without drive. • CE-marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 3 t workpiece diameter: 120 - 1500 mm Turning speed: 0,6 - 1000 mm/min roll diameter: 250 mm total power requirement: 0,5 kW weight of the machine ca.: 0,6 t dimensions of the machine ca.: 1,4 x 1,5 x 1,0 m • demonstration unit • unused vessel turning unit, • with rubberised rolls, manual adjustable roller-spacing, • one device with twin drive with adjustable rotational speed. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Welding robotic set The robotic welding set consists of two separate workplaces. Each workplace has its own controls start and stop of the work cycle and own safety features. Technical parameters: • FANUC ARC MATE 100iC 12S industrial robot with a reach of 1098 mm • 2x single-axis positioner with FANUC counter bearing capacity 1000 kg • Robot on track • Safety optical barriers REER • Safety steel fencing • Welding source MIG/MAG Migatronic Sigma Select 400 A • ABICOR-BINZEL 500 A water-cooled welding bundle and torch • ARC-TOLL software • Search by wire - Touchsensing • Automatic path correction - Tap Delivery contents: • Complete robotic workplace, including assembly and commissioning at the customers site • Two-day training for operation and programming

Used drum mixer made by ,,IWS” INOX WELDING SERVICES, 1000 L capacity. Stainless steel. New: 2022 Drum mixer for bulk and granular materials. 2 pieces available.

Clamping table, sinusoidal table, swivel table Swivel-clamping table Table length: 1130 mm Table width: 300 mm Table height: 112 mm Folding angle: 2 Folding angle: max. 7- folding angle 2 via threaded spindle folding angle max. 7 manually raised to stop Overall dimensions L x W x H: 1450 x 300 x 112 mm Weight: 275 kg good condition Ideal for making wedge strips; used

Packing table, shipping table, packing table ROCHOLZ Table length: 2000 mm Table depth: 800 mm Working height: 860 mm Table top: 20 mm Load capacity: 100 kg - Frame profile made of square tube - Shelf 1430 x 200 mm- Cutting device for foil and paper, cutting width 1250 mm- Upper shelf with 7 compartments (width = 180 mm, height = 300 mm), division over 8 mm removable plug-in bracket- Scope of delivery as shown Overall height without upper plug-in brackets: 1900 mm Overall dimensions L x W x H: 2000 x 920 x 2200 mm Weight approx. 70 kg good condition; used

Turning table, 180 Locking table, rotary table with aluminium plate Positioning table, rotary table, round dividing table 180 Turntable: 1080 mm Height to top edge Turntable: 630 mm - Turntable made of 25.5 mm thick aluminium plate with various holes - Very stable bearing turntable, rotatable by hand- 2 index locking positions 180, manual via foot lever for unlocking - stop damper under the turntable for the locking positions - very stable steel substructure - Flange plate steel substructure L x W x H = 600 x 600 x 20 mm Space requirement x H: 1080 x 630 mm Weight: 210 kg good condition 2 pieces available, price per piece; used

Top thickness 15mm, table 2000x1000mm, hole-diameter 28mm. Adjustable legs, diagonal clamping option, including various clamps, clamping tools and other accessories

Top thickness 15mm, table 3000x1500mm, hole-diameter 28mm. Adjustable legs, diagonal clamping option, including various clamps, clamping tools and other accessories

Top thickness 15mm, table 3000x1500mm, hole-diameter 28mm. Adjustable legs, diagonal clamping option, including various clamps, clamping tools and other accessories

Top thickness 15mm, table 3000x1500mm, hole-diameter 28mm. Adjustable legs, diagonal clamping option, including various clamps, clamping tools and other accessories

Top thickness 15mm, table 2000x1000mm, hole-diameter 28mm. Adjustable legs, diagonal clamping option, including various clamps, clamping tools and other accessories

Top thickness 15mm, table 2000x1000mm, hole-diameter 28mm. Adjustable legs, diagonal clamping option, including various clamps, clamping tools and other accessories

Top thickness 15mm, table 2400x1200mm, hole-diameter 28mm. Adjustable legs, diagonal clamping option, including various clamps, clamping tools and other accessories