We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,054 used machines on RESALE, but how to find them? Machine Search
used
Material loader - Wave Year of construction: Suction conveyor with a hose and suction probes The material loader has its own control system. On the control you can adjust the proportions in which the raw material is to be transported It is possible to buy a plastic container as well as a proportional valve for the transport of 2 raw materials, e.g. regrind and original Price: On request
used
Connected load: 41kW, an inspection is possible.
used
Max. solder width: 340mm, connected load: 8000W, an inspection is possible.
used
Carbon fiber shaft for ALV brake 440kW of 1000Nm.Spezialwelle with Flaschstücken. 980 wave length D = 125 flange outer 150.Ohne adatper (photo-packed).Info 0170/2204056Mail fa.raupp@t-online
used
For sale: Magnetrol Wave Radar Transmitter Order number: 7380.16 For more information, please call or send an email. Phone: 06-20758459 E-mail: wh.derikxgmail.com The price is exclusive of 21% VAT.
used
Nummerieriwelle - Numbering Slitting wave Heidelberg MO Year 1990 -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-
used
max. soldering width/passage height/board length: 340mm/100mm/500mm. max. wave height: 7mm, solder volume SnPb/SnAgCu: approx. 185kg/150kg, heating time from 20°C to 250°C: approx. 90 min. Preheating zones: 1, preheating power: 3kW, max. preheating temperature: 420°C. Soldering frame transport width: 417mm, transport angle manually adjustable: 6-8°, transport speed min.-max.: 0.3-2.0 m/min. Including 2 soldering frames: Profile: 18mm, lug L: 381mm. On-site inspection is possible.
used
Wire rod range: 2.0 - 6.0 mm mesh width: 15 - 80 mm Web width: max. 2,000 mm; ready for use
used
Shaft material, shaft, steel shaft, hardened shaft -Manufacturer: unknown -Diameter: 30 mm -Length: 220 mm -Thread: M10 x 22 mm deep on both sides -Number: 4 x waves available -Price: per piece -Weight: 1.2 kg/piece
used
Double-shaft sword scrubbers for cleaning aggregates; Motor rewinded, restocked;
used
Connected load: 59kW, width: 1450mm, height: 1475mm, with documentation, cooling unit and individual parts, on-site inspection is possible, the operating hours can no longer be determined, only ran in single-shift operation until 2023.
used
Working width: 250mm, transport angle: 4-7°, transport speed: 0.3-2.5m/min, solder volume: 120kg, preheating length: 800mm, connected load: 8kW, length: 1980mm, width: 770mm, height: 1430mm, weight: 250kg, filled with lead-free solder, with documentation, on-site inspection is possible.
used
Max. circuit board dimensions: 330x420-400x495mm, conveyor speed: 0-2.5m/min, an on-site inspection is possible.
used
Connected load: 43,000W, including exhaust air box for the fluxing area, tubular fan shaft, 80 soldering frames, various mounting materials, 3 fluxer nozzles, 5 fluxer filters and documentation, an unused PCS-96 control unit is also available, on-site inspection is possible.
used
A Lincon Power Wave AC / DC 1000 device is for sale. It is a used machine. Each device is equipped with a controller. Lincoln power wave 1000 is a multiprocess source for submerged arc welding. Power Wave AC / DC 1000: 11124 and 11226 plus Power Feed 10A 11139 controller.
used
For sale we offer used Lincoln Power Wave welding source. Lincoln Electric Multi-Process Submerged Arc Welding Source Power Wave AC/DC 1000 11124 and 11226 plus Power Feed 10A Controller 11139 We currently have 3 devices with serial numbers in stock: 1. U106031259 3 (11226) - Year of manufacture 2006 2) U106050109 0 (11226) - made in 2006 3. U104040516 3 (11124) - Year of manufacture 2004 Each comes complete with controller and instruction manual. Each with controller and instructions for use. Personal viewing possible. Price per piece.
new
Machine type TIG inverter welding system gas-cooled DC and AC system Brand Hugong Type Wave 200 D III Supply voltage 1 x 400 Volt = plug 5 / 16 A Adjustment range 5 – 200 amperes Duty cycle 15 % ED at 200 amps 60% ED at 153 amps 100% ED at 118 amps Current adjustment infinitely variable weldable material thickness steel / VA: 5 mm Aluminium: 3 mm Cooling inverter by built-in fan Cooling burner gas-cooled Portable compact system version Fuse 16 Ampere Dimensions L x W x H 500 x 240 x 410 mm Weight 20 kg Age 6 months Condition workshop tested as new incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece TIG burner SR 26, Flex, 4 mtr. long 1 piece ground cable 1 pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 1 piece instruction ma ...
used
used
Description: Operating pressure: max. 8 bar Air consumption: approx. 330 l/min Stroke distance: 60 - 80 mm Stroke frequency: max. 60 strokes/min Loading height: 920 mm Workpiece dimensions: max. 1600 x 600 mm Usable height: max. 300 mm Maximum permissible operating temperature: 35°C (+/- 3°C) Maximum permissible load capacity: 100 kg Solvent max. filling quantity: 500 L Displacement volume: max. 80 L weight approx.: 700 kg, Approx. Onsite Dimension. (l x w x h): 2,100 x 1,200 x 1,100 mm
new
Cryolipolysis Machine (cryolipolysis slimming machine) This is a "fat burning machine". 1 Fat Freezing Handle: Since triglyceride in fats is converted into solid, especially low temperatures, it uses advanced cooling technology to Selectively target fat bulges and eliminate fat cells through a gradual process that does not damage the surrounding tissues, reduces unwanted fat, When fat cells are subjected to precise cooling, they trigger a process of natural removal that gradually reduces the thickness of the fat layer. And the fat cells in the treated area are gently eliminated by the body's normal metabolic process to eliminate unwanted fat. 2. 40K cavitation handle: Strong sound wave explosion fat head with collective strong sound wave head, strong sound wave of 40kHz can be emitted to the human body to violently affect fat cells and cause frictional movement between fat c ...
used
Shredder, industrial shredder, 2 wave star breakers, glass shredder, rotor scissors, star mill, garbage shredder, two-shaft shredder, two-shaft shredder, shredder with filler for wheel loader used The shredder can also be used as a single position. Manufacturer: SANT'ANDREA NOVARA Type: G30/1570 Built in 2003 Speed of the fast wave: 17.7 rpm Speed of the slow wave 9.3 rpm Turning monent. 11875 Nm Engine VEM 22 kW 400/690 V Dimensions Shredder: approx. 2500 x 1000 x height approx. 400 mm with motor 1500 mm Dimensions of cutting unit approx. 1600 x 810 mm Throw-in height approx. 4.6 m Throw-in funnel approx. 3 x 2 m the drop-in funnel is closed by a percular upward opening slider approx. 2.5 x 1.5 m. Total dimensions of the steel construction: approx. 3 x 2 x 8 m In the shredder, used glass was broken for a foam glass bulking system. Basically, other brittle material ...
used
Shredder, industrial shredder, 2 wave star breakers, glass shredder, rotor scissors, star mill, garbage shredder, two-shaft shredder, two-shaft shredder, shredder with filler for wheel loader used The shredder can also be used as a single position. Manufacturer: SANT'ANDREA NOVARA Type: G30/1570 Built in 2003 Speed of the fast wave: 17.7 rpm Speed of the slow wave 9.3 rpm Turning monent. 11875 Nm Engine VEM 22 kW 400/690 V Dimensions Shredder: approx. 2500 x 1000 x height approx. 400 mm with motor 1500 mm Dimensions of cutting unit approx. 1600 x 810 mm Throw-in height approx. 4.6 m Throw-in funnel approx. 3 x 2 m the drop-in funnel is closed by a percular upward opening slider approx. 2.5 x 1.5 m. Total dimensions of the steel construction: approx. 3 x 2 x 8 m In the shredder, used glass was broken for a foam glass bulking system. Originally, the recycling of fluo ...
used
2 pcs motors.: DIN EN 60034-1 Type: K21R 200 L6-4 L TWS 9 / 26.9 kW 400 V 19.5 / 49 amps 985/1470 U / min 200 Kg Year: 04 Wave Pully recording: 55 mm Pully diameter: 255 mm 1 pcs motor: DIN EN 60034-1 Type: K21R 225 S6-4 L TWS HW 12/34 kW 400 V 26/66 amp 982/1475 U / min 270 Kg Year: 04 Wave Pully recording: 60 mm Pully diameter: 255 mm
used
Technical data: -Working width 1030 mm -Material thickness 1.25 mm -Roll diameter 55 mm -Upper roller swing -Rear and front wave about eccentric adjustable -Rear and front wave each with a Groove to round -for sheet metal with wire inlay -Space requirement approx. B H 1350 x 1050 x D 750 mm -Weight approx. 150 kg
used
Mot. - Ring - Bow - Bending machine Offer number: 15252 Make: KNUTH Type: MSB 30 Machine No: 121217 Built: 2000 Technical data: - horizontal working position - 2 mot. driven rollers - manual vertical delivery of the upper roller - Lifting top roller up to 30 mm - Shaft diameter 40 mm - Wave length 35 mm - Wave rotation 12 rpm - Roll diameter 76 - 88 mm - Drive 400 V 1.1 kW - Bending power approx. - Round tube 30 x 1.5 mm - Flat steel 30 x 10 mm - E - foot button for right / left - run - Round tube roller set approx. 23 mm - Weight approx. 150 kg - Space requirement approx. W 700 x H 1150 x D 650 mm
used
Offer via gebr. Suhner Shaft Grinding Machine Rotovar DKM 7 Flexible Shaft Machine Shaft Grinding Machine Grinding Rotovar DKM7 Range: Wave A, 1000-12000 rpm. Wave B, 4600-40000 rpm. (400 V, 50 Hz, 3 Ph, 3.2 kW) incl. accessories 1 belt grinding head 1 brush grinding head Continuous - Separation of motor and tool guaranteed fatigue-free working Applications - Grinding - Disconnect - Roughing - Milling - De-rusting - Polishing - Brushes For light work, especially stainless steel, boiler and steel construction, polishing workshops, apparatus construction, kitchenand hospital supplies, etc.
used
Metal bellows coupling, claw coupling, connecting coupling -Wave wave -Outer diameter: 56 mm -Inner diameter: 16 mm/20 mm -Price: per piece -Number: 2 pieces -Dimension: Ø 56 x 70 mm -Weight: 0.3 kg
used
Metal bellows coupling, claw coupling, connecting coupling -Manufacturer: Gerwah -Type: DKN 45 -Wave wave -Outer diameter: 32 mm -Inner diameter: 10 mm -Weight: 0.07 kg
used
Cutting and planing machine MAKA / Weinig • Lift table • Multi-rip saw MAKA type V350: o Year of construction: 1996 o Chain width (mm): 350 o Cutting height max. (mm): 120 o Engine power (kW): 22 o Feed rate (m/min.): 0 – 40 • Material transfer to the moulder • Moulder Weinig PFA 14/7: o Working width (mm): 140 o Shafts: 7 o 1st shaft: bottom o 2nd shaft: right o 3rd wave: left o 4th shaft: right o 5th shaft: top o 6th shaft: bottom o 7th wave: Uniwelle
used
Moulder Weinig PFA 14/7 Specifications: Working width (mm) 140 Waves: 7 1. Shaft: bottom 2nd shaft: right 3rd shaft: left 4th shaft: right 5. Shaft: up 6. Shaft: down 7th Wave: Uni Wave
used
Description: UPS system Serial number 734E14005 Main input-output voltage: 208 V 3 phases / 480 V 3 phases / 600 V 3 phases Rated power in W: 24000 W Rated power in Va: 30000 VA Input-output frequencies: 50 / 50 Hz Output connector type hard wire 5-wire (3P + N + E): 1 Battery type: VRLA Battery life: 5 to 10 years Network frequency: 60 Hz +/- 3 Hz Number of input connectors: 1 hard wire 5-wire (3P + N + E) Input voltage limits: 166 to 239 V Maximum input current: 56 A Input-output harmonic distortion: less than 3 % for full load Input protection type: 3-pole circuit breaker Load power factor: 0.8 Input power factor at full load: 0.98 Output frequency: 60 Hz sync to mains / 60 Hz +/- 0.1 % for 60 Hz nominal unsynchronised Wave type: Sine wave Output voltage tolerance: +/- 1% static and +/- 5% at 100% load step Output overload operation: 60 seconds at 130% and 30 seconds at 145% Bypass ty ...
used
Description: UPS system Serial number 734J2200A Main input-output voltage: 208 V 3 phases / 480 V 3 phases / 600 V 3 phases Rated power in W: 24000 W Rated power in Va: 30000 VA Input-output frequencies: 50 / 50 Hz Output connector type hard wire 5-wire (3P + N + E): 1 Battery type: VRLA Battery life: 5 to 10 years Network frequency: 60 Hz +/- 3 Hz Number of input connectors: 1 hard wire 5-wire (3P + N + E) Input voltage limits: 166 to 239 V Maximum input current: 56 A Input-output harmonic distortion: less than 3 % for full load Input protection type: 3-pole circuit breaker Load power factor: 0.8 Input power factor at full load: 0.98 Output frequency: 60 Hz sync to mains / 60 Hz +/- 0.1 % for 60 Hz nominal unsynchronised Wave type: Sine wave Output voltage tolerance: +/- 1% static and +/- 5% at 100% load step Output overload operation: 60 seconds at 130% and 30 seconds at 145% Bypass ty ...
used
Basic refurbished Parta U II Cladding sheets new made of stainless steel All wear parts are renewed, Machine is completely rebuilt, Chamber and rotary vane correspond to a new machine, incl. 2 Mehler/ Or Öler Conveyor belt right/left defined position stop stepless speed control Warranty 6 months Suitable for different doughs Weight ranges: 1 chamber 300-2800gr 2 Chamber 110-1250gr Optional: Drop wave Large funnel etc Machine can be tested with dough at any time Delivery and commissioning as well as training possible.
used
3 stueck unused electric motors for Saeege machines from Rueetschi 380 / 400 Volt 50Hz Dreick circuit 5.5 KW 11.3 A 2850 rpm With tool holder (saege leaf holder) Shaft diameter 30mm Diameter handle for saege leaf (middle) approx.55mm Diameter tool holder outside approx.165mm Total length motor approx. 570mm Total width approx. 200mm Price per piece Hole distance for screwing on the motor laengs 200mm Hole spacing Cross 200mm The abstinfers can be varied in the length and width, because the motor is screwed on to the console via T-slots. The T-slots are located on the motor. Thus, any hole distance would be feasible via a different console. Thread on the motor shaft is right thread (if the nut is in the clockwise, is tightened when the motor is counterclockwise and the mother is hooked- view from the front to the wave) Diameter of the thread approx. 28-30mm. direc ...
used
Horizontal side channel pump Materials: - Case: 1.4581 - Wheels: 1.4408 - Wave: 1.4571 Housing sealing: single-acting sliding ring seal, carbon/silicon carbide/viton Version A6: Pump mounted on base plate elastically coupled with 1.35 kW IEC standard rotary current motor Pressure: 2 bar Power: 800 l/h Revolutions: approx. 1,450 rpm Rated frequency: 50 Hz Engine power: 230/400 V Protection class: IP 55 Type of protection: E Ex eII T3 Type of construction: B3 Pumps partly unused, therefore in very good condition!
used
Key data: 31 , 2800
DC motor with brake 31.5 kW Mannesmann DEMAG GCH 140 D2/1105 used, from spare parts warehouse 1x Mannesmann Demag GCH 140 D2/1105 DC motor with brake and speedometer specifications: M7odp Type: GCH 140 D2/1105 375 V 31.5 kW 2800 rpm Brake: 19 - 30 Nm - please ask before purchase with Huebner TDP 0.2 T-4 Speedometer ATTENTION But the connector (Tacho - motor) is missing Wave length: 45 mm Shaft diameter: 32 mm Space requirement LxWxH: approx. 950 x 350 x 350 mm A total of 2 pieces are available The motors are all in a comparable state - the attached images are nevertheless explicitly only an example. Price is understood plus VAT freely loaded warehouse Casting - shipping possible after arrangement and assumption of costs Changes / errors in the technical data as well as intermediate sale reserved Seller Offer No. resale 8160
used
Key data: 31 , 2800
DC motor with brake 31.5 kW Mannesmann DEMAG GCH 140 D2/1105 used, from spare parts warehouse 1x Mannesmann Demag GCH 140 D2/1105 DC motor with brake and speedometer specifications: Type: GCH 140 D2/1105 375 V 31.5 kW 2800 rpm Brake: 19 - 30 Nm - please ask before purchase with Huebner TDP 0.2 T-4 speedometer Wave length: 45 mm Shaft diameter: 32 mm Space requirement LxWxH: approx. 950 x 350 x 350 mm A total of 6 pieces are available The motors are all in a comparable condition - the images used are nevertheless explicitly only an example. Price is understood plus VAT freely loaded warehouse Casting - shipping possible after arrangement and assumption of costs Changes / errors in the technical data as well as intermediate sale reserved Seller Offer No. resale 8159
used
Materials: Housing: 1.4581 Wheels: 1.4408 wave: 1.4571 Sealing: single-acting mechanical seal, carbon/silicon carbide/Viton Model A6: Pump on base plate mounted elastic coupled with 1.35 kW IEC standard motor, three-phase Pressure: 2 bar Revolutions: approx. 1,450 U/min Output: 1,200 l / h Mains frequency: 50 Hz Engine power: 230/400 V Protection class: IP 55 protection class: E ex eII T3 Design: B3 Pump partially unused in excellent condition!
used
DC motor with brake 31.5 kW Mannesmann DEMAG GCM 200 D2/0905 used, from spare parts warehouse 1x Mannesmann Demag GCM 200 D2/0905 DC motor with brake specifications: Type: GCM 200 D2/09005 365 V 31.5 kW 95.00 A 1800 rpm 60% ED Brake: 300.0 Nm Wave length: 115 mm Shaft diameter: 55 mm Space requirement LxWxH: approx. 1350 x 500 x 500 mm A total of 9 pieces are available - but not everyone is equipped with a speedometer (5 pieces available) please ask before purchase! The motors are all in a comparable condition - the images used are nevertheless explicitly only an example. Price is understood plus VAT freely loaded warehouse Casting - shipping possible after arrangement and assumption of costs Changes / errors in the technical data as well as intermediate sale reserved Seller Offer No. resale 8158
new
Weibert D51 Thickness Planer 510 mm new 510 mm planing width Planing height 250mm Electric height adjustment of the Thicknesser table Digital display of the planing height Four pillar guide of the Thicknesser table Thicknessing table cast iron planed 1150 x 510 mm Motor 5,5 KW 400V 50 Hz 5-8-10-16 m / min feed rate Suction connector 160 mm G & RO-D510-CE Options: 7.5 KW motor power Autom. Star - Delta connection 4 knife - TERSA wave 2 sliding rollers in the thicknessing table
used
Wave soldering machine make ATF type 20-33Year 1995, make -No: 0352330795Fluxer (spray fluxer)Compressed air consumption approx. 80 l / min depending on the setting.process width: 330 mmFluxer (foam fluxer)Compressed air consumption approx. 60 l / min depending on the setting.Process width: 330 mmMax. Flux capacity: 4.0 lMax. Foam height: 12 mmpreheatingRadiator per machine: 8Power consumption: 4.0 / 7.9 kWTemperature range Ambient temperature: -300 ° CTemperature sensor: Type J Fe-CuNisolder potPump motor: 24 V DC 1.3 AMax. Soldering temperature: 30 ° CHeating elements: 9 x 500 WHeating time approx: 2.0 hoursTemperature sensor: Type J Fe-CuNiLot quantity: 220 kgconveyor beltMax. PCB size: 335 x 420 mmDrive motor: 24 V DC 1.5 ABelt speed: 0 - 2.5 m / min.adjustable transport angle: 5 - 9 °Max. Process height: 120 mmSpecification machineDimensions approx: 1600 x 1000 x 1360 mmExtractio ...
used
Propeller agitator Manufacturer: Stelzer Type: propeller agitator Wave length: 64 cm In very good condition!
used
Propeller agitator Manufacturer: Stelzer Type: propeller agitator Technical data: Engine power: 11 kW Speed: 1.450 U/min Frequency: 50 Hz Wave length: 60 cm Shaft diameter: approx. 6 cm In very good condition!
used
Angle gearboxes / gearboxes NOSEN type. RN-4 M-I-LR-1:1 T shape / 1 shaft input - 2 wave outputs -Shaft diameter 19 mm -The ratio of i = 1:1 -Speed max 1500 rpm -Weight 10 kg -Max. Of torque at 1500 rpm: 31.9 NM used from inventory.
new
The NEXUS of 7501 is the cheapest universal hardness testing machine with currently available technology: This hardness testing machine sets the benchmark in quality and price in the device class with proven swivel mechanism (motor switch between Indenter and lens): never get a comparably-equipped machine of this quality at such a fair price. In the standard version are already integrated: USB camera + software for the automatic measurement of impression of hardness -electronically controlled test load application with load cell in closed-loop -integrated boxed PC (WIN 7), LAN connectivity, result export, hardness testing software IMPRESSIONS -integrated touch-screen monitor for a simple, direct touch control -LED lighting, Brinell with ring light The machine is universally suitable for all classic metal hardness testing (test loads 0.5 250 kg). Due to the modern, quality equip ...
used
GBS test pulse rev3 pulse generator for long-term insulation tests The test pulse structure is intended for long-term insulation tests on test specimens of up to 6 nF capacity. Inverter for high-voltage test transformer · Internal sine wave generator: 50-200Hz. · Pulse width modulation 16-24kHz of the sine over full bridge. · Inverter voltage 0-600V adjustable, Imax=2.6A, maximum power 1.3kW · Pulse current limit 110A (cut-off threshold) Pulse transformer – control · Control via full bridge · Full bridge power supply adjustable 0-1000V, 1.3A max. · Pulse current limit 100A (cut-off threshold). · Pulse width 20-120μs, nominal 94μs, adjustable · 2 selectable series inductors 150μH, 300μH to adjust the pulse width or rise times to load capacitance and voltage. · Pulse repetition rate 0.1 – 2.5 kHz, adjustable. · Polarity: Adjustable positive, negati ...
used
Tiede Universal U550 GW Magnetic Electric Crack Detector Manufacturer: Tiede GmbH Type: U550 GW Type: Magnetic Electric Crack Detector Rated operating current I 5400 A AC seats or 3800 A AC effective, adjustable in 8 steps Flow Ø: 8000 Aw full wave DC. Adjustable in 8 steps, measured according to DIN 54 131 Mobile magnetization coil lights Ø 800 Bushing Ø: 5000 Aw with alternating current adjustable in 8 stages, chamois according to DIN 54131 Year of construction 1984 Accessories/special equipment Electronic magnetization controls Degaussing device Support rolls Blackout cabin Main machine dimensions Total length mm 8.000 Total width mm 2,500 Total height mm 2.500 Scope of work Remarks Nominal diameter mm ~5.500 Field of application: Testing of crankshafts. Item condition: used Further technical data can be found on the machine ...
used
Wave grille loom: working width: max. 3,000 mm wire rod: 2.0 - 7.0 mm mesh widths: 8.0 - 100 mm Kripper: wire staerke range: 1.5 - 7.0 mm feed speed: max. 28 mtr./min; ready for use
used
Double-sided fully automatic hydraulic cutting - milling - drilling machine PADE NST double-sided fully automatic hydraulic cutting - milling - drilling machine Production of chairs, tables, frames, and furniture parts Max work length 2100 mm Tilt-10° â +45° Rotation-10° â +50° 2 saw blades diameter 400 mm 2 drilling heads left, right can be rotated through 360 °, 8 spindle cross-shaped grid M2fi2 2 additional horizontal drilling heads from behind can be rotated by 360 °, 8 spindle cross-shaped grid 2 milling spindles bore wave 30 mm 1 motor for longitudinal adjustment of 1.5 kW 2 Saegemotore 2.2 kW 4 boring Motors 2.2 kW
used
Machine name: Paddle dryer used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Year of construction: 2002 Speed: 107 rpm Material: Stainless steel Drive motor: 5.5 KW Version: EExdellCT4 Total capacity: 235 liters Wetted parts: stainless steel 1.4571 Gearbox:Helical gear motor Equipment: Double jacket, mechanical seal, wave heating Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Tech. Documentation: yes available Note: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame, Maierkopf HWR 225 Condition: Used very good Price: on request