water used for sale

New milk clarification separator (clarifier / cleaner) for removing impurities from milk and reduces the level of leucocytes and bacteria. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Product: Fresh cows milk (≤ 48h from milking). It can be carried out using both hot and / or cold milk, but the best performance is acheived if the temperature is between 50° - 55 °C. Feeding pressure (in): ± 1,5 bar. Clarified milk pressure (out): ± 4 bar., Milk clarification capacity: 10.000 liter per hour., The new offered milk clarification separator (clarifier) comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, made out of special SUPER DUPLEX stainless steels with very high resistance to mechanical stress and corrosion., - Discharged of the product by means of 1 centripetal pump., - Discharge of the solid substan ...

New milk bacteria clarification separator (bactofuge) for reducing the bacteria in milk and consequently reduces the temperature of the pasteurisation process. Used to upgrade the quality of (drink)milk or for the production of cheese. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Process temperature: 50°C - 60°C. Feeding pressure (in): ± 1,5 bar. Bacteria clarified milk pressure (out): ± 4 bar., The efficiency, measurable in terms of the percentage of bacterial load abatement, depends on the product and process characteristics as follows:, - 97-99% anaerobic spores., - 85-95% aerobic spores., - 75-95% total bacteria load., Milk bacteria clarification capacity: 10.000 liter per hour., The new offered milk bacteria clarification separator (bactofuge) comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, ma ...

Cream separator for warm whey skimming. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Separation of mixtures of liquids with different densities and simultaneuous elimination of solids (Three Phase Separation). This process separates the fat content in the whey (present is a small percentage, between 0,15% and 0,70%). It is simpler as the milk proces, if there are low curd fines. The whey should be filtered before entering the separator. Process temperature: 35°C - 40°C. Skimming efficiency, measurable in terms of the percentage of residual fat in the whey, is between 0,02% and 0,03%. Ther percentage may also be lower if the whey is pre-clarified., Whey skimming capacity: 15.000 liter per hour., The new offered whey skimming separator comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, made out of special ...

Cream separator for warm whey skimming. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Separation of mixtures of liquids with different densities and simultaneuous elimination of solids (Three Phase Separation). This process separates the fat content in the whey (present is a small percentage, between 0,15% and 0,70%). It is simpler as the milk proces, if there are low curd fines. The whey should be filtered before entering the separator. Process temperature: 35°C - 40°C. Skimming efficiency, measurable in terms of the percentage of residual fat in the whey, is between 0,02% and 0,03%. Ther percentage may also be lower if the whey is pre-clarified., Whey skimming capacity: 10.000 liter per hour., The new offered whey skimming separator comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, made out of special ...

Cream separator for warm milk skimming. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Separation of mixtures of liquids with different densities and simultaneuous elimination of solids (Three Phase Separation). Product: Fresh cows milk (≤ 48h from milking). Process temperature: 48°C - 58°C. Skimming efficiency, expressed in terms of the percentage of fat remaining in skimmed milk is 0,04 - 0,055% with the Röse-Gottlieb method or 0,03 - 0,05% with the Gerber method. Concentration of the cream is 25% to 45%. Feeding pressure (in): ± 1,5 bar. Skimmed milk pressure (out): ± 4 bar. Cream pressure (out): ± 2,5 bar., Milk skimming capacity: 5.000 liter per hour., Standardization capacity: 7.500 liter per hour., The new offered milk skimming separator comes with:, - Steel frame, cladded in stainless AISI 304., - Bowl with disc stack, made out o ...

New milk bacteria clarification separator (bactofuge) for reducing the bacteria in milk and consequently reduces the temperature of the pasteurisation process. Used to upgrade the quality of (drink)milk or for the production of cheese. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Process temperature: 50°C - 60°C. Feeding pressure (in): ± 1,5 bar. Bacteria clarified milk pressure (out): ± 4 bar., The efficiency, measurable in terms of the percentage of bacterial load abatement, depends on the product and process characteristics as follows:, - 97-99% anaerobic spores., - 85-95% aerobic spores., - 75-95% total bacteria load., Milk bacteria clarification capacity: 6.000 liter per hour., The new offered milk bacteria clarification separator (bactofuge) comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, mad ...

New milk bacteria clarification separator (bactofuge) for reducing the bacteria in milk and consequently reduces the temperature of the pasteurisation process. Used to upgrade the quality of (drink)milk or for the production of cheese. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Process temperature: 50°C - 60°C. Feeding pressure (in): ± 1,5 bar. Bacteria clarified milk pressure (out): ± 4 bar., The efficiency, measurable in terms of the percentage of bacterial load abatement, depends on the product and process characteristics as follows:, - 97-99% anaerobic spores., - 85-95% aerobic spores., - 75-95% total bacteria load., Milk bacteria clarification capacity: 8.000 liter per hour., The new offered milk bacteria clarification separator (bactofuge) comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, mad ...

Hobart GXHK-70N Dishwasher GX Series Glass Washer SMARTRONIC with 3 automatic programs 60 sec. / 90 sec. / 120 sec. Up to 60 baskets (1500 jars) per hour (basket size 500 x 500 mm) Built-in water softener – ensures optimal water quality and provides a radiant finish Washing tank capacity – 10.8 liters Water consumption/cycle – 2.0 liters Water pressure requirement. – Cold or hot supply, 0.6 – 6.0 BAR Electrical load – 7.6 kW 400/50/3 More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Used complete isobaric filling line Krones up to 32 000 bph Significantly the Used complete isobaric filling line Krones up to 32 000 BPH is a technologically advanced line Specifically it s designed for PET filling with water both still and carbonated and soft drinks CSD Impressively this used isobaric filling line offers an impressive capacity of up to 32 000 bottles per hour BPH combining efficiency and precision in the bottling process Main Component KHS Blomax Blower Central to the line is the KHS Blomax 18 blower achieving a maximum productivity of 32 000 B H Included in the equipment are a preform silo elevator and unscrambler plus an air recovery system Additionally a new touch HMI Human Machine Interface has been installed and the machine has been completely overhauled It has been adapted to work with a single type of neck preform e g 1L 30gr Preform PCO1881 and comes with a set ...

General SKU317T816 LocationBarneveld MakeVentilex TypeFBD-4,5 Year of construction1999 Main Features MaterialStainless steel Motor3 KW Surface4.5 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface4,5 m² Bed sizes5000x900 mm, 5000x1200 mm Product inletØ250 mm Number of sections:2 Motor3 kw, 3x380 Volt (EExe II T3) Capacity600-2260 kg/hr (nom. 1750 kg/h) Max. temperature80-125 °C MaterialStainless steel 1.4435 (316L) Information Mounted on mild steel framecheck Floorspace5,5x1,4 m Total height3 m Weight3200 kg Extra SpecificationsHeating medium: steam, 5 bar Cooling medium: cooling water, chilled water 5-7 °C Pressed air: 5-6 bar, water and oil free with: wet scrubber/condensor: Ø 1000 x 3300 mm, Inlet flange: Ø 350 mm, Outlet flange: Ø 350 mm, 1-full-cone spray nozzle (capacity: 7 m³/h at 2 bar), 3 inspecion covers: ...

Vegetable cutting and washing line consisting of: Product elevator by means of plastic belt with buckets. Dimensions: 2740 x 200mm useful Model: EV-2740X200 Cutting, slicing and dicing machine for vegetables (potatoes in its last application) with continuous working system for uninterrupted production. Three-dimensional cuts that have four corrugated surfaces and smooth cuts of a variety of fruits and vegetables. Accepts a maximum product feed of up to 5.5 (140 mm) in any dimension. Cuts cubes or smooth or corrugated strips, three-dimensional cuts that have four corrugated surfaces and smooth cuts of a variety of fruits and vegetables. Slices: 1/16 - 3/4 (1.6 - 19.1 mm) Cubing: A combination of the slicing blade, crosscutting blade arbor and circular blade arbor is used for dicing. Changing the size of the cubes is done by using the necessary cutting spindles and adjustin ...

Vegetable cutting and washing line Line composed of: Product elevator using plastic belt with buckets Dimensions: 2740 x 200mm useful Brand: T.PACK S.L Model: EV-2740X200 Year 2005 Cutter, slicer and dicer for vegetables (potatoes in its last application) with a continuous work system for uninterrupted production. three-dimensional cuts that have four wavy surfaces and smooth cuts of a variety of fruits and vegetables. Accepts a maximum product feed of up to 5.5 (140mm) in any dimension. Makes smooth or wavy dice or strip cuts, three-dimensional cuts that have four wavy surfaces, and smooth cuts of a wide variety of fruits and vegetables. Slices: 1/16 – 3/4 (1.6 – 19.1 mm) Dicing: A combination of the slicing blade, cross blade arbor and circular blade arbor is used for dicing. Changing the size of the cubes is done by using the necessary cutting spindles and adjust ...

00790-2 R&D department for Lithium-ion battery manufacturing will be COMPLETELY dissolved The value of these fixed assets amounted to approximately 7.5 million euros at the time of new acquisition. Manufacturer: Werner Mathis AG Manufacturer: Eirich Gustav GmbH (see also List1 page 6 EL5 Profi-Plus Manufacturer: Robust Habicht Manufacturer: Digatron Manufacturer: Coherent Rofin B.V. Manufacturer: Keyence Inventory name Filling station: Glovebox Braun with scale, cooling unit, etc. Exhaust air scrubber FRIDURIT Neutralization plant FRIATEC Rena Technologies GmbH Lauda Dr. R. Wobser GmbH & Co. KG AFA Glass furnace Ball fall viscometer Solder fume hood Profilometer Battery test system BaSyTec CTS 32 channels CTS 1666 Battery test system BaSyTec CTS 32 channels CTS 1667 Battery test system BaSyTec CTS 32 channels CTS 1668 Vacuum pump Measuring  ...

- Model: Lavatec KES - K 671/185- 2-2-312/25-110R - New chains: 2015 - Rated Capacity: 18000 BTS/h - Total caustic contact time: 11.83 min - Bottle cells: 110 mm - Bottle diameter: min/max. 50 – 100 mm, H: max. 342 mm - Number of bottles per row: 25 - Number of bottles in the machine: 5975 - Capacity of pre-soaking baths: 2880 l - Capacity: 27050 l - Capacity of caustic filter basin etc : 2120 l - Spray basin 1 lukewarm water: 700 l - Spray basin 2 lukewarm water: 700 l - Spray basin 3 cold water: 700 l - Heating medium: Superheated water - Machine in very good condition

Hydraulically driven diamond wire sawing machine. - Vertical wire sawing machine, combined with a swivel arm, for sawing various stone materials such as granite, marble, basalt, as well as concrete and artificial stone by means of a diamond rope. The machine is suitable for hand-held straight cuts, for hand-held cutting of circles with the circular cutting device and for hand-held cutting of free contours with the copying device. With the optional arc cutting device, semi-circular workpieces can be sawn fully automatically from a block of stone (a sheet template is required for each radius). With the optional saw frame tilting device, bevel cuts of up to 45° can also be made. Maximum cutting width in the projection of the machine 490 mm The maximum workpiece height that can be sawn with the machine is a maximum of 550 mm, depending on the material to be sawn. Swivel arm to ...

Description: Lot consisting of 2 'Concentration plants': OI 40M concentrator - year 2017 Typical operating conditions: Quantity of water extracted: approximately 20,000 l/h Processing cycle: 10-18 h Concentration ratio: about 5 times Quantity of water processed per cycle: approximately 25,000 l/h Typical operating pressure OI: 25-35 bar Maximum temperature: 50° C The system is substantially composed of: AISI 316 L stainless steel washing tank of approximately 5 quintals Stainless steel preload centrifugal pump complete with three-phase motor 400 V, 50 Hz, power 4.5 kW 1 stainless steel bag safety filter 1 pressurization pump (multi-rotor centrifugal) in stainless steel complete with three-phase motor 400 V, 50 Hz, power 22 kW, regulation with inverter 2 stainless steel recirculation pumps complete with 400V three-phase motor, 50 Hz, 15 kW power, inverter regulation. hyd ...

Tank Environmental Protection Wozniack . Specialist establishment according to the Water Budget Act (WHG) offers as follows . Storage tank / extinguishing water tank 50.000 liters used. The container is used and cleaned from the inside. Length: approx. 10,700 mm Diameter: approx. 2,500 mm Weight: approx. 8,000 kg The container can be fitted with the appropriate fittings for extinguishing water can be equipped according to DIN . Of course, you can also use your tank system. All our tank systems are used in our company by selected employees extensively checked and checked. An inexpensive delivery can be offered with . In addition, we purchase existing tank systems and can professionally as an approved specialist company , clean and transpot. We would be happy to make you an offer . We are happy to offer you diesel pumps and diesel pumps with data coll ...

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Storage tank / extinguishing water tank 30.000 liters used. The container is used and cleaned from the inside. Length: approx. 9900 mm Diameter: approx. 2000 mm Weight: approx. 5000 kg The container can be fitted with the appropriate fittings for extinguishing water can be equipped according to DIN . Of course, you can also use your tank system. All our tank systems are used in our company by selected employees extensively checked and checked. An inexpensive delivery can be offered with . In addition, we purchase existing tank systems and can professionally as an approved specialist company , clean and transpot. We would be happy to make you an offer . The tank system we offer freely loaded from the location War ...

P45 - used approx. 30 m³ / 30,000 litres polyester tank / GRP tank, above ground, flat bottom. Food tank, insulated storage tank, water tank, whey tank,.fodder tank volume: approx. 30 m³ / 30,000 litres dimensions: Ø 2.60 m x height approx. 5.75 m weight: approx. 3.0 t The container is in used condition, according to the age there are traces of use. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, canola oil, seeping Juice, farm slurry or as rainwater tank, water cistern etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us  ...

P5 used 50 m³ / 50.000 litres steel tank, double wall, above ground or underground tank, on 2 steel bases, good condition Dimensions: diameter approx. 2,50 m (without base) height: 2.78 m high (with base) length: 10.70 m base width: approx. 0.90 m base distance: 7,86 meters DIN6608 D steel tank, coated on the inside with a 7-fold burnt-in varnish. The tank is double-walled and stands on 2 steel bases. the steel tank / container can be used as fire-fighting water tank, storage tank for water, manure, AHL, ASL, seeping juice, canola oil, rainwater collection tank, etc.. We ca modify the tank to suit your needs as well, e.g. as a fire-fighting water tank or as an underground tank fitted with an outer bitumen coating: please ask us. Price upon request. Transport can be arranged at low cost. Item location is 79098 Freiburg im Breisgau. It is not possible to upd ...

P12 - used appr. 30 m³ / 30,000 litres PE-tank, plastic tank / flat bottom tank, double-walled, former chemical tank, in good condition. capacity: 30 m³ / 30,000 litres diameter inside: appr. 3.00 m outer dimensions: appr. 3.48 m x 4.80 m overall height Double-walled, (i.e. with an outer hull), non-translucid, various connections such as ventilation, inlet, outlet, etc., lid on top of the roof. For transportation the different attachments, level indicator, probes, pipes, etc. will be dismantled and are supplied along with tank. Former hydrochloric acid 31% tank Chemical tank for hydrochloric acid, sulphuric acid, methylated, ironIIIchlorid, formic acid, hydrogen peroxide, acetic acid, etc. The tank's size makes it perfect for placement inside a shed or barn, as a storage tank for water, waste water, sewage, seeping juice, manure, AHL/ASL etc. High-quality plastic t ...

P18 - used appr. 30 m³ / 30,000 litres PE-tank, plastic tank / flat bottom tank, double-walled, former chemical tank, in good condition. capacity: 30 m³ / 30,000 litres diameter inside: appr. 3.00 m outer dimensions: appr. 3.48 m x 4.80 m overall height Double-walled, (i.e. with an outer hull), non-translucid, various connections such as ventilation, inlet, outlet, etc., lid on top of the roof. For transportation the different attachments, level indicator, probes, pipes, etc. will be dismantled and are supplied along with tank. Former hydrochloric acid 35% tank Chemical tank for hydrochloric acid, sulphuric acid, methylated, ironIIIchlorid, formic acid, hydrogen peroxide, acetic acid, etc. The tank's size makes it perfect for placement inside a shed or barn, as a storage tank for water, waste water, sewage, seeping juice, manure, AHL/ASL etc. High-quality plastic t ...

Operating temperature: 90 °C Material: stainless steel 316 L, mirror-polished (easy to clean) Operating pressure: 5 bar Code. No. 27512 12 Ser. No. 92013791A The filter is designed for the otimal filteration of solutions in pharmaceutical, biological, cosmetic, bioprocess, food and brewing industries. The samples of application: biopharmaceutical blood products atibiotics cough syrup intravenous solutions bioprocess solutions cosmetic, food and brewing products spiritus water food and beverages: water, wine and beer pharmaceutical : API water biotechnology: cell crop, plasma fractions, chemical solutions

EWD ESTERER HD_30 SV high in TOP ZUSTAND ! Repairs 2009, with power Pos.1 frame width 750 mm through shoehe max. 750 mm stroke 600 mm speed max. (also when idle) 300 rpm Number of rollers 4 pcs. feed 0 - 12 m/min operating side, seen in cutting direction: right pressure register. machine and base plate in torsional casting construction. gate rollers are divided for easy exchange, hydraulic lifting and lowering of the upper gate rollers, adjustable roll pressure. Electric feed, for stepless regulation the feed speed. central lubrication for all frame guides. Upper guide with water cooling, with water-covering. swing shaft with grease-lubricated roller bearings, flywheel hubs made of high-quality sphaero casting, swing shaft and flywheel hubs in the press bandage. fixed and empty disc for single-space operation. electric slide (0.55 kW). with gate hanging (saegenspanner, saegeblaet ...

Used approx. 6 m³ / 6,000 litre polyester tank, GRP tank, standing vertically, with flat bottom, above ground - good condition (Staffelstein tank). The tank is in good condition, having stood in the a hall. Dimensions: approx. Ø 2.1 m x 2.70 m high. Standing flat bottomed tank, with multiple connections and spouts, DOM suitable. The container can be used as a storage tank for water, liquid feed, manure, AHL, ASL, whey, potato steam skins, molasses, stillage, seeping juice, canola oil, palm oil, as a rain collection tank, firefighting water tank, water cistern, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. ...

Rated power: up to 1000 kg/h engine power: engine: 0.75 kW buster cleaning: 0.37 kW high pressure cleaner: 4.7 kW Electrical connection: 400V 50Hz (3 phases) Electrical fuse: 16 A Dimensions: Laenge: 2 145 mm Width: 1 270 mmhoe height: 1 290 mm d drop-off height: 1 290 mm Width: 580 mm Application width: 240 - 460 mm application shoehe (9 steps): 10 - 50 mm Weight: 665 kg Material: 1.4301 / AISI 304 Juice yield: up to 75% band speed (infinite): 2.1 - 5.5 m/min Throughltime: 0.6 - 1.6 min Water consumption for cleaning: 3 l/min Connection: Connection for waste water: DN75 Connection for juice drain: 1 1/2 He juice drain: 305 mm High water flow: 86 mm High disarmer discharge: 745 mm usable for core and stone fruit Supplied New machine - best condition

Oil diffusion pump Manufacturer: Leybold type: DIP 50,000 Status: used Technical data Product: DIP 50000 cat. No.: 22240 Suction side connection flange: DN 1000 ISO-F Connection flange printed page: DN 160 ISO-K Pumping speed for air below 1.0 x 10-4 mbar / 7.5 x 10-5 Torr: 50000 l / s Working range: 1.0 x 10-2 - 5.0 x 10-7 mbar 7.5 x 10-3 - 3.8 x 10-7 Torr Final total pressure: < 5.0 x 10-7 mbar < 3.8 x 10-7 Torr Maximum permissible forevacuum pressure: 6.0 x 10-2 mbar 4.5 x 10-2 Torr Resources: Pump delivered without resources Amount of resources min: 12.0 l 12.7 qt Max: 25.0 l 26.4 qt Power supply: 3-ph Y, 400 V, 50/60 Hz Heating power: 24 kW Number of cartridges: 24 Heating-up time: < 30 min Number of cooling circuits: 3 Minimal cooling water Pump: 1500 l / h 6,6 gal / min Jets Hat vapor barrier: 150 l / h 0.66 gal / min Cooling water pressure: 6 ba ...

P59 - used appr. 25 m³ / 25,000 litres polyester tank / GRP tank, aboveground, vertical, flat bottom, manufacturer Erka. Vertically standing, aboveground storage tank, water tank, whey tank, feed tank, brine tank, slurry tank, etc. capacity: 25m³ / 25,000 litres material: GRP tank dimensions: appr. Ø 3.00m x height 3.70m weight: appr. 2.5t Multiple connections, see pictures. The tank is in used condition, according to the age signs of wear are present. The container can be used as storage tank for water, whey, stillage, potato steam skins, liquid feed, manure, seeping juice, rapeseed oil, as rain collection tank, water tank, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it m ...

Freestanding distillery – 350 liter capacity Equipment: - Heating: by steam (against extra charge combustion chamber with water bath) - Steam jacket / water bath 4 mm stainless steel - Copper bubble Ø 900 mm, semi-conical - Filling DN 350 cast brass - Medium column / special fine burner with 3 trays - And attached tube end phlegmator and Kotzbecken - Incl. 4 sight glasses - Outlet ball valve DN 100 - Connecting piece agitator - Special tube cooler made of stainless steel including brandy - Spirit tubes stainless steel Basic price distillery, filling volume 350 liter: 32.620,00 € Additional equipment: Combustion chamber for solid fuels 48 kW made of 8 mm steel, incl. Smoke gas heat exchanger 8-pipe system 2.750,00 € Insulation water bath / steam bath made of stainless steel with 30 mm rockwool 1.760,00 € 4 connectio ...

STILMAS pure steam generator - type PSG 3OO DTS - produce saturated dry pyrogen-free pure Steam by using industrial steam as heating fluid. Pure steam DN 50 PN 16 Sampling discharge: ½” Triclamp Industrial steam DN 40 PN 16 Condensate discharge: DN 25 PN 16 Cooling water outlet: ½” Triclamp Safety valve: DN 40 PN 16 Cooling water inlet: ½” gas M. Electric line 380 V/50 Hz Compressed air 6 bar Main components: A) E 020 DOUBLE TUBE SHEET EXCHANGER - Construction in AISI 316 - ISPESL tested - Design pressure: shell side 10 bar – tube side 6 bar B) ER 020 EVAPORATION CHAMBER AISI 316 L construction ISPESL tested - Design pressure: 6 bar C) SUPPORT FRAME Painted carbon steel construction D) FEEDWATER PUMP P 020 AISI 316 stainless steel construction Type GRUNDFOS CRN 2 – 70 ( See Annex n° 24) E) SAFETY VALVE PSV 020 - SN - AISI 316 STAINLESS STEEL CO ...

MARINE DIESEL ENGINE Reference number 20131 Brand MITSUBISHI Model S12A(N) - MPTK Power 910 HP RPM 1550 RPM Serial number 11245 General condition Running Taken Out Status AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Flywheel INCLUDED Governor MECHANICAL CONTROL Turbo YES Aspiration Turbocharged / Jacket Water Aftercooled Cooling system 12-cylinder, 4-cycle, water cooled diesel engine, with direct-injection, turbocharger, air-cooler, built-up heat exchanger and sea water pump Starter Electrical Start (24V) Remarks RUNNING ENGINE SPECIFIC FEATURES Panel INCLUDED Expansion tank YES Heat exchanger YES DIMENSIONS LxWxH (cm) 2439mm1482mm1596mm Weight (kg) Net Weight 5000 kg

GS14 - used approx. 100 m³ / 100,000 litres double-walled steel tank, heating oil tank, firefighting water tank, water cistern. In good condition, aboveground tank on two mounted steel consoles, storage tank, water tank, former oil tank, steel tank painted in green. capacity: approx. 100 m³ / 100,000 litres material: steel tank, double-walled, DIN6616/2 dimensions: Ø 2.9 m x approx. 15.8 m long weight: approx. 17.0 t manufacturer: Kraemer Apparatebau other: 2 entry shafts Upon request the tank can be repainted for additional charge. The container is used, has been emptied and professionally cleaned inside. According to the age there are traces of use. This steel tank / container can be used as a storage tank for many different media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask u ...

6 departments 1 x steam, 1 x hot water, 2 x product to product, 1 x cold water, 1 x ice water Performance 8,000 litres / hour Clip seals total 423 plates Material of plates AISI 316 (V4A), thickness 0.8 mm

HIDROS LDK.070X-1C Brand:HIDROS Type:LDK.070X-1C Stock number:M21-4478 Cooling capacity:64 kW Number of fans:2 Refrigerant:R407C Refrigerant Content:19 kg Voltage:400 Volts Power consumption:42,8 A Dimensions:2650 x 1150 x 1800 mm Weight:930 kg Year:2010 Number in stock:2 piece(s) Price: Quotation request Description: Good air-cooled Hidros water chiller with 2 scroll compressors on 1 circuit. This chiller is equipped with a hydro kit (water pump + expansion vessel) and a Dixell 1PG 100D controller. Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C. (Free Cooling: Q= 43kW, P= 1.4kW at Tw= +15°C / Tambiant = +2°C and 20% Glycol). Visit also our website: used-refrigeration

CTS climate test cell Walk-in test facility Here we offer you a CTS climate test cell. CTS climate test cell type TW -60/20 T means: Temperature W means: Walk in -60 means: lower temperature -60 °C 20 means: 20 m³ test room volume Plant description: With the temperature test cell, the function or material property of a test material can be tested under temperature influences. The system is divided into the test chamber including the machine compartment and a control station including a lock. The lock can be tempered independently of the control station or test chamber to minimize moisture input when entering the test chamber. The vertical air flow with a correspondingly high amount of recirculating air guarantees a good temperature transfer to the test material. The air treatment room is located at the back of the interior. To the left of the system, the units are located ...

Cooling capacity 60 kW, Number of compressors: 1, Refrigeration circuit: 1 Cold water flow: 20°C Cold water return: 15°C at air inlet 42°C, Total water circulation: 12.7 m3/h Tank volume: 330 liters

P181 - used approx. 40 m³ / 40,000 litres PE-HD-tank, plastic tank, flat bottom tank, double-walled with an outer hull. specifications: capacity: approx. 40 m³ / 40,000 litres material: PE-HD tank, plastic tank manufacturer: Formoplast Kunststofftechnik GmbH measurements: Ø approx. 3,49 m outside / Ø approx. 3,00 inside x height tank approx. 5,70 m / total height approx. 6,50 m mark of conformity: PA-VI 321.103 specific weight: 1,13 kg/L media: former chemical tank for formalin DIBT and media list available, suitable for AHL and ASL PE-HD tank, professionally cleaned and in good condition. Double-walled, i.e. with an outer hull, non-translucid, various connections such as ventilation, inlet, suction pipe, etc., lid on top of the roof. According to the media list suitable for many different chemicals e.g. iron chloride, hydrochloric acid, acetic acid, caustic soda, sul ...

Used Sabroe DXA26F water cooled chiller. Complete with a Sabroe / Stal S26B screw compressor, ABB M2FA 315 SMA 2 V36 elektromotor: 50 Hz - 200 kW - 2977 RPM, Alfa Laval MK15-BWFDR plate heat exchanger as condenser with a volume of 201,9 liters, plate heat exchanger as evaporator, oil seperator, oil cooler, Grundfos MG160MB2-42FF300-H3 water pump, VEM K21R 63 G 2 /2292 pump and pressure and safety switches and a Siemens Simatic HMI display. Product specifications: Brand: Sabroe Type: DXA26F Product type: Water Cooled Chiller Capacity kW: 630,0 (Capacity based on -9°C/+40°C) Capacity Tons: 179,1 Refrigerant: NH 3 (ammonia) Refrigerant Type: R717 Weight in kg: 6.545 Sizes: 4950x1800x2670 mm (LxWxH) Compressor(s) type & model: Stal S26B Display: Siemens Simatic HMI

year: 1991, modification controls and measuring technique 2004 no of tanks: 3 pcs (water, caustic, recovered water) material: s/steel heating: steam Consisting of: 1 x CIP-caustic tank content: 7.000 l, make: AMS 1 x CIP-hotwater tank content: 7.000l, make: AMS 1 x recovered water content: 4.000l, make: AMS - controls Siemens S7, new measuring technique 2004 - incl. all valves and pumps - incl. heat exchanger - incl. internal piping

Make and Model: GE WHG-125 Year: 2011 Hours: 6000 approx. Year : 117 HZ : 50/60 Voltage: 400/480 V Scope of supply: Each ORC skid has its own heat exchangers for evaporation and condensing of the refrigerant (working fluid). You would need to install a water heat source and a water cooling circuit, no cooling towers or blowers are included with what we have in storage. Condition: These units have been decommissioned and been in storage since May 2016. Unit 1 and 2 had a report of an MBC fault (magnetic bearing controller). Unit 3 has several parts missing due to a failure in the power electronics. Some parts of the Power electronics, PLC, speed drive for the refrigerant pump are missing. Unit 4 had a failed heat exchanger and filled the ORC with water, would need stripping to determine the full extent of the repairs needed. Extra: These units run on a working fluid (refri ...

MARINE DIESEL ENGINE Reference number 20132 Brand CUMMINS Model KTA38 M Power 940 HP RPM 1800 RPM Serial number 33121291 General condition Running Taken Out Status AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Flywheel INCLUDED Governor MECHANICAL CONTROL Turbo YES Aspiration Turbocharged / Jacket Water Aftercooled Cooling system Sea water pump, Heat exchanger, Water cooled Starter Electrical Start (24V) Remarks RUNNING ENGINE INCLUDED 2152mm1462mm2083mm SPECIFIC FEATURES PanelDIMENSIONSLxWxH (cm)Weight (kg) Net Weight 4300 kg

CARRIER 30RA 060 B Brand:CARRIER Type:30RA 060 B Stock number:M22-4556 Cooling capacity:57 kW Number of fans:1 Refrigerant:R407C Refrigerant Content:15 kg Voltage:400 Volts Dimensions:2071 x 1081 x 1329 mm Weight:597 kg Year:2005 Number in stock:2 piece(s) Price:Quotation request Description: Nice air-cooled Carrier water chiller with 2 scroll compressors. This chiller is equipped with coated fins, a heat exchanger, a Pro-Dialog Plus controller and a hydro kit (water pump, expansion vessel). Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C. Please visit also our website: used-refrigeration

Screws: 2x x 58 mm / 26D Engine: 250 kW DC Capacity: approx. 800 - 1000 KG Material: PE, PP, PS, ABS // Details: DC motor, concurrent, segmented screws and cylinders (2x x 58 mm / 26D), screw speed: max. 900 rpm, degassing, vacuum pump, BKG underwater pelletizing system OPTI-LINE 1 consisting of: Kreyenborg start-up, water box, cutting head, water circulation system, heat exchanger, process water tank, centrifugal Control: Siemens S7 with visualization

WASHING INSTALLATION 90° One washer to washing system to clean the containers. The containers are tilted 90 degrees and transported through a washing device. The washing device consists of a housing that contains a spray device which is suitable for cold water with a pressure of 5bar. A conveyor belt to transport the containers. After washing, the containers are tilted back to horizontal position. No recycling water included. The concrete floor must be prepared to drain the water to a certain drain pit. The best option is lower the concrete floor in the area of the washer. OVERHEAD DE/STACKER For the PLC controlled movement, stacking and destacking of empty, containers with a maximum weight of 100 kg an overhead stacker/destacker is installed. The stacker/destacker can PLC controlled take up from:
-a-        The destacking position on the buffer (this is also the  ...

AT-Motor, repaired according to RAL-GZ 797 Complete motor, version biogas Four-stroke petrol gas engine (110 kW) 6 cylinders in series water-cooled engine cooling water-cooled exhaust pipe Charging: Exhaust gas turbocharger with water-cooled turbine housing Mixture cooler: two-stage mixture cooling with high and low temperature circuit Old part deposit: 6,000 euros

Hobart 305 GTP Dry Steam Fast Cooker Gentle, healthy cooking: steaming, steaming or blanching 3 different pressure levels 0 / 0.5 / 1 bar for individual adaptation to the food Extremely short cooking times Individual temperature program as standard: 50° - 99°C Electronically controlled program sequences Compact tabletop unit with built-in steam generator 1 cooking chamber for 3 x 1/1 GN up to max. 65 mm deep or 2 x 1/1 GN up to max. 100 mm depth or 1 x 1/1 GN up to max. 200 mm depth Multi-setting, the connection value can be reduced to 18.2 kW with hot water connection (power then approx. 550 servings/h) Automatic defrosting Water level controller with display Fully electronic control for time input Self-diagnosis with fault display Chamber pressure is displayed digitally Evaporation destruction with built-in wras condensation Automatic boiler emptying with drain pump a ...

Used Stephan Combicut TC300SK Specific for process cheese/melt cheese Main Features: WORKING PRESSURE / TEMPERATURE: 0.5 BAR / 95°C - 115 °C EXECUTION ORIGINAL STEPHAN UNDERFRAM – COMPLETE STAINLESS STEEL PROCESSING DRUM – STAINLESS STEEL CHARGING SLIDE – STAINLESS STEEL CHARGING HOPPER – STAINLESS STEEL DISCHARGING VALVE – STAINLESS STEEL CHARGING VALVES FOR BOTTEROEL OR OTHER LIQUIDE PRODUCT – STAINLESS STEEL MAIN ENGINE 2 SPEED: 60KW (1500/3000RPM.) MAIN MOTOR SEALING - WATER COOLED WORKING TOOLS MAIN MOTOR: 3 KNIVES GEAR MOTOR SEALING - WATER COOLED WORKING TOOLS GEAR MOTOR: 7.5KW MIXING ARM WITH WALL AND COVER SCRAPER COMPLETE VACUUM POMP SYSTEM VACUUM DOM FOR COOLING AND DEHYDRATION – STAINLESS STEEL ELECTRONIC CABINET – STAINLESS STEEL PLC CONTROLL UNIT SYSTEM WITH DISPLAY (NEW SIEMENS S7 ) SAFETY CO ...

Ultrafilter ultraaqua autoclean 0016 AC Donaldson Ultrafilter Ultrafiltration System for Air Compressor Condensate Oil/Water Separator for Compressed Air Condensate ● Treatment plant for the separation of compressed air condensate and condensates with difficult separation properties (e.g. stable emulsions) by means of cross-flow filtration ● Physical separation principle guarantees residual oil content of < 5 mg/l in water ● Intelligent control concept with programmable control for safe plant operation, incl. plain text display via text display, Fault monitoring via alarm messages with potential-free contacts and optional external network connection ● Optimized cleaning by comparing input/output extends cleaning intervals and saves operating costs ● Thermally and chemically highly resistant ceramic membrane with long service life ● Antifreeze protection wi ...

The PRIMA POWER PLATINO 1530 laser was produced in 2012 by the Italian company Prima Power. Technical parameters: – machine time worked: 24800 hours – power: 2500.0 W – CNC control: Primach 20L – X travel: 3000.0 mm – Y travel: 1500.0 mm – working area: 3000 x 1500 mm – maximum sheet length: 3000.0 mm – maximum sheet width: 1500.0 mm – maximum sheet thickness: 15.0 mm – maximum load on the table: 250.0 kg – machine length x width x height: 12000.0 mm × 6000.0 mm × 3000.0 mm – machine weight: 12000.0 kg Rofin Sinar DC 025 CO2 laser specification – type: CO₂ – laser: Rofin Sinar DC 025 – power: 2,500 Watt – power stability: + -2% FS – wavelength: 10.6 µm – gas type: He 67.7%; CO2 4.1%; N2 28.2% – beam propagation factor M2: 250 microseconds, 70 used resolutions – positioning accuracy: + -150 radians – operating condi ...

WATER TEMPERATURE CONTROLLER TOOL-TEMP TT-133 MP-345 (a little leaky) M. No.: 21-06498-3 // Pressurized water device up to 140 ° C mould weight up to 1'000 kg Equipment / Additional information: Temperature control: self-optimizing microprocessor controller With digital display of the setpoint and actual value. Cooling capacity: 47000kcal / h at 120 ° C Cooling system: indirect Pump output: pressure operation max. 4.5 bar / max. 100L / min. Suction operation vacuum max. 8mWS Refilling: automatic with water filter Volt: 3x380-400 Watt: 14100 Hz50