british flag
Resale Logo

water used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information Secondhand packaging, processing & Pharmaceutical equipment  CE-Pharmamachinery  http://www.ce-pharmamachinery.com 
banner logo
start page > keywords water > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
121128372 1403

REICH-TANK rainwater tank fodder tank for sale
P86 polyester tank 30,000 L GRP-tank water tank


P86 - used appr. 30 m³ / 30,000 litres polyester tank / GRP tank, manufactured by Reich company, aboveground, on two steel bases, in good condition. volume: appr. 30 m³ / 30,000 litres material: polyester / GRP  ...

 
P86 - used appr. 30 m³ / 30,000 litres polyester tank / GRP tank, manufactured by Reich company, aboveground, on two steel bases, in good condition.

volume: appr. 30 m³ / 30,000 litres
material: polyester / GRP
diameter: appr. Ø 3.00 m
length: 5.00 m
height: 4.30 m including base

Storage tank by manufacturer Reich, lying horizontally, aboveground tank on two steel bases, dome on the top of the tank body, multiple connections, in- and outlets, as depicted on the images.

The container can be used as a storage tank for many different media such as water, liquid feed or as a rainwater collection tank and much more.

Price upon request.

Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us.

More information and offers on our site:
profi-tanks(dot)de
 
Price  
    request
121116377 707

HOBART FTN for sale
Box washers


Here we sell a well-kept Hobart FTN band dishwashing. It is in good condition, has been serviced regularly by Hobart. Recently, the engine was overhauled again, while both wash pumps were renewed, as well as some hea ...
used machine
 
Here we sell a well-kept Hobart FTN band dishwashing.

It is in good condition, has been serviced regularly by Hobart. Recently, the engine was overhauled again, while both wash pumps were renewed, as well as some heaters and hoses, also are also the rinse pump new. On these parts get guarantee from us half a year!

The dishwasher has been cleaned yet and can be delivered in one piece by truck, so you must be connected to you only on electricity and water.

Band width 60 cm

Shelf height: 50 cm with drying

Including rinse,- and detergent dispensing device total length: 560 cm direction: right to left
Technical data:

Voltage: 380/400V 47,84KW

Will receive an invoice with expelled VAT!
2002
8,500 €  
    request
121112629 1102

KOMATSU 6D95L-1 for sale
Diesel engines


Komatsu 6D95L-1, 6-cyl. Diesel engine water cooled, 4,900 cc displacement, complete, runs. Diesel engines 1-6 cyl., various products: Deutz, Daedong, Hatz, Iseki, Isuzu, Kubota, Lombardini, Perkins, Shibaura, Ruggerin ...

 
Komatsu 6D95L-1, 6-cyl. Diesel engine water cooled, 4,900 cc displacement, complete, runs.

Diesel engines 1-6 cyl., various products: Deutz, Daedong, Hatz, Iseki, Isuzu, Kubota, Lombardini, Perkins, Shibaura, Ruggerini, Yanmar etc.
Capacity of 4,5 kw upwards, used partly as new.
Gasoline engines: 1-2 cylinder 3-15 kw B & S, Honda, Kohler, Robin, Wisconsin. Various cooler, starter, alternators, and mufflers in stock, various hydraulic pumps and hydraulic motors.
 
Price  
    request
121112050 1300

BALLAST water Cleaner for sale


Auction Name: Ballast water purifiers (Denominaties Bedrijven) at Den Helder Public online auction. Start of the auction: 23 October 2017 17:00 GMT 0200 (Western Europe (DST) Deadline: 30 October 2017 18:00  ...
used machine
 
Auction Name: Ballast water purifiers (Denominaties Bedrijven) at Den Helder




Public online auction.

Start of the auction: 23 October 2017 17:00 GMT 0200 (Western Europe (DST)
Deadline: 30 October 2017 18:00 GMT 0200 (Western Europe (DST))


The specified price is an opening bid.



To participate in the auction you can find more information at:Bva-Auctions

 
used machinery auction RESALE 25,000 €  
  NL   request
121111994 703

GEA CFS Type HLT 10000/600-29 for sale
Hot air oven


suitable for thermic oil heating steam : 900 kg/hr at 95°C belt width 600 mm frying length : ± 9.000 mm air consumption : 120 nL/min. water consumption : 0.5 m3/hr, 3-5 bar power : 3 x 380V, 50Hz, 7.8kW dimensio ...

 
suitable for thermic oil heating
steam : 900 kg/hr at 95°C
belt width 600 mm
frying length : ± 9.000 mm
air consumption : 120 nL/min.
water consumption : 0.5 m3/hr, 3-5 bar
power : 3 x 380V, 50Hz, 7.8kW
dimensions: (L x W x H) : ± 10.300 x 1.820 x 3.150 mm
total power ± 240 kW
heating separately adjustable in two areas
adjustable speed
canopy with electric hoists
Suitable for steam injection (to heat up and to improve product yields)
 
Price  
  BE   request
121111854 1300

THERMOFIN TDD.1-091.24 for sale
Dry-cooler V-Block 575kW


Manufacturer: Thermofin Medium: Water glycol 70 / 30% Medium temperature: occurs 40 ° C.Austritt 35 ° C. Cooling capacity: 575kW air temperature: 25 ° c (inlet) Fans: 8 pieces, 2, 5kW, 400V, 50 Hz, 3 wire Connect ...
used machine
 
Manufacturer: Thermofin
Medium: Water glycol 70 / 30%
Medium temperature: occurs 40 ° C.Austritt 35 ° C.
Cooling capacity: 575kW air temperature: 25 ° c (inlet)
Fans: 8 pieces, 2, 5kW, 400V, 50 Hz, 3 wire
Connection: Entrance 2xDN100, exit 2xDN100
Dimensions: Lxwxh = 5300x2200x2300mm
Weight: 2100kg
Noise level: 65 DB (a) distance of 10 m, year built: 2008
Condition: Very good, slats OK, tightness Jenbacher cogeneration plants tested
2008
Price  
    request
121098263 1102

JENBACHER JMS 320 GS-N.LC for sale
Engines


2 COGENERATION ENGINES: 2 X JENBACHER JMS 320 GS-N. LC YEAR OF MANUFACTURE: 1996 / 1998 HOURS: 49768 / 36634 OUTPUT: 1006kVA / 995kVA ALTERNATOR: STAMFORD OUTPUT: 1064 KW / kVA 1330 VOLTAGE: 415 V AC 3 Phase COMPL ...
used machine
 
2 COGENERATION ENGINES: 2 X JENBACHER JMS 320 GS-N. LC
YEAR OF MANUFACTURE: 1996 / 1998
HOURS: 49768 / 36634
OUTPUT: 1006kVA / 995kVA
ALTERNATOR: STAMFORD
OUTPUT: 1064 KW / kVA 1330
VOLTAGE: 415 V AC 3 Phase
COMPLETE PLANT
•Generator (alternator, engine engine and PLC)
•Gas train
•Water cooling system (heat exchanger + complete pump)
•Oil Cooling System (heat exchanger + complete pump)
•Control Panels generator (DIANE)
•Electrical control panel accessories (pumps, etc)
•Technical Documentation
1996
Price  
  ES   request
121097581 706

KLINGER Euroglass 24/1/844 for sale
Bottle washer


- Year of construction: 2003 - Completely stainless steel - Capacity: 12000 bts/h - Transit time: 15.24 min. - Contact time lye: 6.48 min. - Number of bottles in the machine: 2904 - Number of ranges: 127 - Equippe ...
used machine
 
- Year of construction: 2003
- Completely stainless steel
- Capacity: 12000 bts/h
- Transit time: 15.24 min.
- Contact time lye: 6.48 min.
- Number of bottles in the machine: 2904
- Number of ranges: 127
- Equipped for crown caps bottle 0.5 l too
- Pre-soak: 2050 litters
- Main lye soak: 8000 litres
- Steam heated (3 bar)

4 spraying basins
- Lye: 800 litres
- Hot wate r: 800 litres
- Warm water: 800 litres
- Cold water: 800 litres

Bottle cages:
- Inside-Ø: 98 mm
- Height: 340 mm
- Inside height: 330 mm

Bottles dimensions:
- Ø min. 56 mm
- Ø max. 90 mm
- Height min. 150 mm
- Height max. 330 mm

Dimensions:
- Length: 9560 mm
- Width: 4085 mm
- Height: 2750 mm
- Weight: 17000 kg

Transport dimensions:
- Length: 9560 mm
- Width: 3400 mm
- Height: 2700 mm
2003
Price  
    request
121093014 101

GILLARDON GSB 20 for sale
Box Column Drill


Drilling diameter steel: 20mm, swing: 260mm, drill stroke: 115mm, weight: 400kg, number of machines: 2, including water pump and container.
used machine
 
Drilling diameter steel: 20mm, swing: 260mm, drill stroke: 115mm, weight: 400kg, number of machines: 2, including water pump and container.
1975
Price  
  DE   request
121092998 706

DENIMAT N24 WZ for sale
Water treatment Wasser Filter


Water filter for nitrate 3000 litres an hour
used machine
 
Water filter for nitrate 3000 litres an hour
2010
1,000 €  
    request
121080746 1102

JENBACHER J616 GSC02 for sale


2 COGENERATION ENGINE:2 x JENBACHER J616 GSC02 OUTPUT:2000 kW / 1942kVA YEAR OF MANUFACTURING: 1999 HOURS: 47107 / 46154 GENERATOR: AVK OUTPUT: 660kVA The following are integral parts of generators and groups nee ...
used machine
 
2 COGENERATION ENGINE:2 x JENBACHER J616 GSC02
OUTPUT:2000 kW / 1942kVA
YEAR OF MANUFACTURING: 1999
HOURS: 47107 / 46154
GENERATOR: AVK
OUTPUT: 660kVA
The following are integral parts of generators and groups needed for its implementation (gas inlet, outlet energy):
•Generator (alternator, engine engine and PLC)
•Gas train
•Water cooling system (heat exchanger + complete pump)
•Oil Cooling System (heat exchanger + complete pump)
•Control Panels generator (DIANE)
•Electrical control panel accessories (pumps, etc)
•Technical Documentation
•Silencer and y-pype
1999
Price  
  ES   request
121080701 1403

A1 STEEL BUILDINGS Prefab Steel Hall for sale
Mall Entrance Steel Tower


Dismantled entrance tower of a defunct "Praktiker" retail facility. POSSIBLE FUTURE USE: as exhibition hall, building entrance, office building, winter garden and much more. APPROXIMATE DIMENSIONS: Floor s ...
used machine
 
Dismantled entrance tower of a defunct "Praktiker" retail facility.

POSSIBLE FUTURE USE:
as exhibition hall, building entrance, office building, winter garden and much more.

APPROXIMATE DIMENSIONS:
Floor surface: approx. 152 square meters,
the footprint of the entrance tower has the shape of an irregular Pentagon.
Tower length: approx. 12.30 meters clear internal length.
Tower width: approx. 12.30 meters clear inner width.
Tower height: approx. 16.45 meters total height from terrain.
Height: approx. 13,45 meters roof level from terrain.
Height: approx. 12,50 meters clear height measured from the floor.

LIVE LOAD ASSUMTION:
regular snow load according to snow load zone II (elevation 400 m) s = 0,75 kN/sqm.

STRUCTURAL STEEL WORK:
the load-bearing structure of the tower is composed of a primed, coated, bolted steel frame construction made of hot-rolled (HEB 240) European Standard I-sections (steel grade St 37). The cladding is attached to the steel construction as posts and transoms from the inside of the tower. Three horizontal steel frames are installed below the roof surface. Transmission of the wind loads via the vertical steel columns. The roof level is it designed as a "Disc". Diagonal bracings are incorporated in the facades of the 4 exterior wall surfaces. Through this diagonal bracings, the wind forces are transferred to the base disc made of reinforced concrete Strip foundations.

ROOF:
the roofing consists of trapezoidal steel bearing shells (Hoesch type E 100-0.88 m) toped with thermal insulation (mineral fiber) and a water-bearing PVC membrane which was disposed of during deconstruction.

FACADE:
the facade cladding (of the 4 external wall surfaces consist of double glazing with ARGON gas filling) is attached to posts on the inside of the tower structure.

FACILITIES:
2 double electric sliding doors with canopies, one single glazed door, 2 radiators, various light fittings.

NOTE:
Back side facade is missing because the "Main Entrance Tower" was aded to an existing hardware store.

FORMER LOCATION:
Eriagstrasse 30, D- 85053 Ingolstadt, Bavaria.

AVAILABILITY:
the MAIN ENTRANCE TOWER was disassembled and packaged by professional fitters and can be picked up from storage yard.

DOCUMENTATION:
the original structural design calculations and design drawings are available.

NET PRICE EX YARD:
upon written request with complete company data of prospective buyer.
2002
Price  
    request
121080578 1200

GRUNDFOS CH 8-30 A-W-A-CVBE for sale
CIRCULATION PUMP


Product: CH 8-30 a-w - A-CVBE Code: 4N502115 EAN number: 5700311371947 Pumped liquid water Temperature range of the liquid 0... 90 ° C Type of engine MG80 Power input - P1 970 W Operation C 20 µF P2 740 W Powe ...
used machine
 
Product: CH 8-30 a-w - A-CVBE
Code: 4N502115
EAN number: 5700311371947
Pumped liquid water
Temperature range of the liquid 0... 90 ° C
Type of engine MG80
Power input - P1 970 W
Operation C 20 µF
P2 740 W
Power 50 Hz frequency
Rated voltage 1 x 220-240 V
Current rating 4.3 to
2005
Price  
  ES   request
121080544 702

SCHWEIKERT Litre-Therm-K-Elektronik for sale
Water mixing devices


We offer you here Bros. Water mixing equipment: -Producent: Schweikert -Type: Litre-Therm-K electronics -Year of construction: 1989 -220 V 50 Hz 50 W If you are interested and for more information we are availab ...

 
We offer you here Bros. Water mixing equipment:

-Producent: Schweikert
-Type: Litre-Therm-K electronics
-Year of construction: 1989
-220 V 50 Hz 50 W

If you are interested and for more information we are available.
 
Price  
    request
121080540 843

GBC GJL8012 for sale


GBC GJL8012, 2007 Ref.Nr: 2365 manufacturer GBC model GJL8012 year built: 2007 speed: 10,000 sh/h Max sheet size: 112 x 142 cm availability: immediately condition: very good price: on technical request spezification: &a ...
used machine
 
GBC GJL8012, 2007
Ref.Nr: 2365 manufacturer GBC model GJL8012 year built: 2007 speed: 10,000 sh/h Max sheet size: 112 x 142 cm availability: immediately condition: very good price: on technical request spezification: â?¢ touch screen
â?¢ Safety shields
â?¢ Push button control panel
â?¢ Emergency stops
â?¢ Thermal
â?¢ U.S. water heater
2007
Price  
    request
121080486 2486

MERCEDES BENZ Mit Wasserbehälter for sale


Year of constr.: escorts In 2004, drive: diesel, displacement: 4250 CC, turning circle: 12,000 mm, elapsed. Mileage: not readable (battery low), inspection plate: no inspection sticker available: must be requested by the ...
used machine
 
Year of constr.: escorts In 2004, drive: diesel, displacement: 4250 CC, turning circle: 12,000 mm, elapsed. Mileage: not readable (battery low), inspection plate: no inspection sticker available: must be requested by the purchaser, seats: 2 type: service: 90 kW maximum speed: 175 km/h FIN: WDB9700111K946481, power: 90 kW, dimensions: 6,800 x 2.445 x 2550 mm, color: Yellow weight: 5090 kg / gross weight: 8,000 kg equipment: material equipment, CD, cassette player. Known defects: stop button gears is missing, type certificate does not exist, Aukleberrückstände, div. abrasions, sticker residue, paint damage, transmission, water pump is defective. Matriculation year: Vehicle was never approved, authorities must be assumed by the purchaser. Inventory number: 434564; incl. water tank, Zellinger, type: 575, WW, year: 2004
2004
Price  
    request
121080449 1101

SAB A64N - 400 kVA for sale
Diesel generators


Power: 400 kVA / 320 KW Diesel engine (four-stroke) / type / Nr: Iveco afio / GE 8281 Sri 26 OL Cylinders: 8 V Cooling: Water-cooled (mechanical stem cooler) Generator / type / Nr.: Leroy Somer / LSA 47.1 M6C6/4 /  ...
used machine
 
Power: 400 kVA / 320 KW
Diesel engine (four-stroke) / type / Nr: Iveco afio / GE 8281 Sri 26 OL
Cylinders: 8 V
Cooling: Water-cooled (mechanical stem cooler)
Generator / type / Nr.: Leroy Somer / LSA 47.1 M6C6/4 / GH099555 / 01
Voltage: 400 V / 231 V
Frequency: 50 Hz
Speed: 1,500 min-1
Type: Stationary on base frame
Tank: -
Switchgear / Starter device: Yes / electric
Battery voltage / capacity: 24 V / 120 Ah
Generator switch: Yes
Power switch: -.
Automatic: Kuhse type: KEA 101 UESY
Accessories: -.
Dimensions (L X W X H): 2960 x 1330 x 2100 mm
Weight: 2800 kg
1999
19,700 €  
    request
121068580 108

L-TEC LANZETTA C-120 for sale
Plasma Cutting Systems


Marco LANZETTA C-120 with hose package and hand torch Technical data: Power control range A 10 - 120 maximum current at 100% ED 120 A at 130 V open circuit voltage 200 V voltage V 220 380 415 500 Da. kVA-24 24 24 24 c ...

 
Marco LANZETTA C-120 with hose package and hand torch
Technical data:
Power control range A 10 - 120 maximum current at 100% ED 120 A at 130 V open circuit voltage 200 V voltage V 220 380 415 500
Da. kVA-24 24 24 24 current A 63 36 32 27 power factor 0.75 0.75 0.75 0.75 frequency 50 50 50 50 fuses A 80 50 36 36 dimensions Lxwxh 1130 x 615 x 970 mm
Weight 380 kg
Protection class IP 21 cooling type F ISO class 6 water cooler F
important:
Cutting gases argon nitrogen or argon oxygen
Thus, fine plasma cutting are possible!
the machine can be used also as a MAG/MIG welding machine
New price: around â?¬22!

 
Price  
    request
121068196 1300

BAUDIN 881 for sale
miter grinding machine


Machine was overhauled, dismantled, rear and front chain overhauled, stock exchanged from rear chain, spindles newly stored, spindle guide overhauled, new sealed water tank, pneumatic obsolete. Grinding machine for stra ...

 
Machine was overhauled, dismantled, rear and front chain overhauled, stock exchanged from rear chain, spindles newly stored, spindle guide overhauled, new sealed water tank, pneumatic obsolete.
Grinding machine for straight edges, for grinding and fine polishing straight edges, phases and Miters from 0-60 °

Data:
-Glass thickness: 3-25 mm
-min. size: 80 x 120 mm
-maximum dimensions: 3 m x 3 m or greater
-Dimensions: 6500 x 1600 x 2500 mm
-Speed: 0.4-4.2 m / min - weight: 2600 kg

Price on request
 
Price  
    request
121068185 703

ALEXANDERWERK GMD170 for sale
Mixers and vacuum mixers


Alexanderwerk GMD170 II hub kneading machine used Boiler and mixing arm made of stainless steel Boiler drain hole for cleaning water with stainless steel protection grid Engine was built by Diosna and is usually GMD1 ...

 
Alexanderwerk GMD170 II hub kneading machine used
Boiler and mixing arm made of stainless steel
Boiler drain hole for cleaning water
with stainless steel protection grid
Engine was built by Diosna and is usually GMD170 on the plate but is EMD170
two speeds, tidy and quiet running
good condition, should nevertheless be cleaned thoroughly prior to use
Traces available, previous owner has also in the one or other place already after painted

Video about test run and more pictures available
 
3,275 €  
    request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Find used machinery dealers in your country