We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,047 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
LIQUIDATION of washing machine of boxes and trays. Its condition is completely renovated, revised and guaranteed. Tunnel for washing trays or boxes, production 400/600 units / h. Manufacturer by INDUSTRIAL WASHING MACHINES LTD model CRUSADER 600. The tunnel is calculated and designed for a production of 400/600 ud / h, the water is heated by oil heating system, its washing phase with hot and soapy water, and its rinsing with mains water make its finish optimal. PROCESS Washing in closed circuit with hot soapy water. Rinsing with mains water. GENERAL CHARACTERISTICS Construction in stainless steel AISI 304. Tunnel dimensions: Length: 3,500 mm Width: 1,400 mm Height: 2030 mm Loading mouth 570 x 280 mm high (max. trays 600 x 400 x 280 mm). Loading height of 1,000 mm. Upper body with side hinges for registration and rounded shapes to facilitate sanitation and avoid water cross ...
used
contino 400/2 KLT container washer The machine is manufactured in a special service provider design and has a maximum tunnel width of 410 mm and height of 410 mm, which means that almost all common industrial containers can be cleaned. Depending on the degree of soiling, the capacity is
used
Process water chiller / chiller / chiller water cooled, Type: TWEevo Tech 381 P3 MTA S.p.A. TWEevo Tech 381 P3 are air-cooled compact water chillers that are suitable for outdoor installation (-5°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 60 ltr., built-in P3 pump. Cold water outlet temperatures from -10°C to +30°C can be adjusted. Cooling capacity kW 72.2 [20.5 tons cooling] Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 12.3 Available pump pressure (bar) 3.46 Cooling water temp. Outlet/Entry (°C): 45 / 40 Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 39 Max. current (A) 66 Starting current circuit (A) 234 Protection class: IP54 Dimensions: Length (mm) 2790, Width (mm) 1150, Height (mm) 2020, Weight empty / filled (kg) 975 / 1385 Connection R ...
used
Meiko FV 40.2 Glass and Dishwasher MEIKO top-class warewashing technology Aqua-Stop-System "ASS" with floor tray Automatic leakage water control, more protection for the built-in parts Alkaline fine filter system "AktivPlus" Excellent cleaning result due to multi-filtered tank water Tank cover sieve Targeted dirt removal into the AKTIV-PLUS fine filter Washing and rinsing arms made of chrome-nickel steel Robust for demanding commercial use, e.g. in communal catering or as a catering dishwasher Booster Pump for rinse flow result independent of mains pressure - thus always constant rinse temperature and rinse quantity EWS Technology for lowest water consumption and lowest operating costs Mains pressure-independent rinse/free outlet already meets the highest safety standards Caustic pump makes independent of on-site drainage height Integrated dosing devices incl. stor ...
used
Overview Most of the equipment, which belongs to this brewery, was manufactured in 2021 and 2022. There are several components which have never been used. The owner had purchased all the equipment to set up a micro brewery but then decided to shift the production of his beer to a bigger brewery, producing for him. Therefore all the equipment is for sale. List of components Manufacturer: Bühler AG Machine Type: malt mill Model: Smartgrist YOM: 2022 (used since February) Manufacturer: Spadoni Machine Type: 25 hl brew house Model: RMB 2500 YOM: 2022 (not used yet) Capacity: 25 - 30 hl in one brewing process, two processes possible in ten hours Manufacturer: ABC Perello Machine Type: steam generator Model: PMY - 12 YOM: 2022 (not used yet) Capacity: 1250 Kgv/h Manufacturer: --- Machine Type: water softener Model: --- YOM: 2022 (used since January) Manufacturer: Isma S.A. Machine ...
used
Complete soft drink production unit for sale. We offer the following machines for sale as a package: - TLG vacuum filling machine -ALCOA capping machine -APV pasteurization equipment -GRAMEGNA shrink wrap machine -ELF EUROPE Duplex oil and water-based filling machine. The machines have not been used since 2004, we just stored them, hoping to start the activity again. The equipment is in excellent condition, only because it has not been used, so it requires maintenance. Sold as a package at this price. 1.INTERPLAST GRAMEGNA SHRINK FOILING MACHINE FOR SALE. Year of manufacture 1998. UE98069, BJ6/1998. It is in very nice condition. We havent used it since 2004, we put it aside until now, just in case we need it again. We used it in our soft drink production plant. Package size: 500Ã200 mm, max foil width 600 mm. Capacity 8000 pcs/h, sold together with buffer belt and con ...
used
Icma San Giorgio MCM/60V – 40D twin screw co-rotating extruder Mod. MCM/60V-40 D and down stream equipment High performances, intermeshing screw type for self cleaning characteristics. Screws Ø 60 mm Nominal L/D ratio 1:40 Max screw speed 300 rpm Barrel Modular design made up by 10 square-barrel sectors, each one 4 D long Barrel sectors made of LK3 nitrided steel Built-in water cooling circuit, simple construction and easy to maintain High efficiency heating system by cartridge heater Broached shaft made in special alloy brake/yield/torsion resistant Modular design Screw elements made of K 110 wear resistant steel Gear box Torque per screw shaft Nm. 1050 per each shaft Gear-ratio 4.28 : 1 Min. bearing lifetime at max. speed and motor power 20,000 working hours @ 160 bar Main A.C. motor Power applied to gearbox shafts KW 66 Speed rpm 1285 Water cooling unit ...
used
Used compressor Siad Tempo 2004 Full maintenance in early 2022 2000 working hours of autonomy until the next routine maintenance deadline for this Siad HP compressor 1500 HP compressor OIL FREE AIR COMPRESSION UNIT with a capacity of 1500 m h having the following main working data gas to be compressed air electric feeding 380 V 5 50 Hz Suction conditions altitude 500 m s l m temperature min max internal 10 35 C temperature min max external 5 45 C relative humidity 50 wet bulb 26 C Delivery Conditions max pressure 42 bar output at suction conditions 1500 m h pneumatic part working dry rotation speed 750 rpm average piston speed 3 75 m sec electric motor 4 poles installed power 315 kW shaft power 270 kW electric motor execution IP 23 coupling V belts cooling water T inlet outlet water 10 C approx approx water requirement 27 m h Structural features of the Used compressor Siad The pneumatic ...
used
NH3 refrigeration system., Additional title: refrigerant NH3, Brew water flow: 5 m3/h against 20 m, Ice water flow: 15 m3/h against 20 m, Refrigerant capacity: 85 kg NH3, Compressor capacity: 145 m³/h, Power: Q0: 2 x 119 kW, Length: 0,945 m, Width: 0,54 m, Height: 0,765 m, Weight: 510 kg, Features: 2x compressors: 145 m³/h, 26 kW with FC, 37 kW nominal output; NH3 separator mounted on frame, with brewing water condenser and ice water condenser; air condenser on frame 3x 2.95 kW; heat recovery condenser with pump; 2 x ice water pumps (2.2kW, 15m3/h vs. 20m); brewing water pump (1.1kW, 5m3/h vs. 20m); expansion tank, max. permissible operating pressure: high pressure side: 22 bar, low pressure side 16 bar
used
Cat.-Nr. 09-2900-2 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...
used
Cat.-Nr. 09-2900-1 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...
used
Cat. No. 11-3210 New Plant description Sudwerk This small-sud plant comprises all components for a complete and fully functional brewing plant. All system parts used have a high quality standard and are characterized by their ease of use. The two-device brewhouse consists of a mash/spice pan and a purified vat, which is also used as a hot tub. Technical description All pipes are cleaned by a circulation pumping system. a) In the mash pan, the mash is boiled, then the mash is pumped with the beer pump into the purifier pond. b) When bluish, the wort is pumped back into the mash pan. c) After bluish, the purified vat is cleaned and the sieve bottom removed. A special injection nozzle is installed on the cylinder wall at the bottom of the läuterbottich. As a result, it can also be used as a hot tub after removing the mobile screen floor. d) After boiling the hops ...
used
We have for sale a Vacuum Evaporation Plant: The plant consists of: -3-stage vacuum evaporation system VV 75 KDB -Down-flow evaporator Condest 13 K-Niro Technical details available upon request. Vacuum evaporation is a process that has been used by the large-scale chemical industry for decades. Using vacuum evaporation systems allowed (for the first time) utilizing the advantages of this process also in small and medium-scale applications. Vacuum evaporation systems have been developed specifically for the metal machining industry as well as for applications in the field of environmental protection. It is used to treat under vacuum aqueous solutions that contain pollutants. Typical fields of application include: - Recover electrolytes from electroplating - Keeping a uniform rinsing water quality in static rinsing tanks - Volume reduction of sewage wate ...
used
The following completely reconditioned and ready compact system of SEPARATORS & SERVICE T.D. is for sale. This selfcleaning separator WSPX 303TGP-71 is clean mainly used water-based coolant, for the concentration of washing liquids like lye also waste water or rain water cleaning. The maximum hydraulic throughput capacity is 1500 l / h. The engine is a two-pole motor with 50 Hz 2.2 kW. The drum has a speed of 9516 RPM 69 DB (A). Control water consumption is 0.5 l / emissions per output. Sediment volume ca: 0.63 liters. Output of min 0.8 liters, max 0.9 litres. The separation is carried out in the separator drum which is driven by the electric motor via a flat belt. The separator can be used as a concentrator with a large heavy phase (E.g. water) and a small stage (E.g., oil), as well as the light phase. The separator can be used as well as cleaning separator (Klarifikator) with o ...
used
100,000 litres of fire-fighting water tank - water tank - underground tank for underground storage, outside with bituminous insulation - needed - the container is emptied, cleaned and was factory-provided by us with a bitumen exterior painting Tank capacity: 100,000 litres / 100 m³ Length: approximately 15,750 mm Diameter: approx. 2,900 mm Weight approx. 11,600 kg Material: Material steel S 235 JRG 2 is a low-cost delivery with own trucks. Simply tell us the place of delivery, will receive the exact freight costs immediately. A tour is at any time possible by appointment only. If you need any more information, just give us a call or send us an email to info@barth-tank.de. Trade-in and purchase of tanks/containers is possible to do this, just talk it over us. As the European market leader, we maintain a large stock of over 3,000 above-ground and underground storage ...
new
PTC Torpedo Hot Water 140°C and Steam 140°C/32bar Skid similar but no Dynajet, Oertzen, Falch, DIBO, ... - Skid on hot-dip galvanized frames with forklift tabs. The following hot water models are available: Torpedo 21/200 | 21l/min. at 200bar | Engine: Kohler KDW 702 12.6kW Torpedo 23/250 | 23l/min. at 250bar | Engine: Kohler KDW 1003 19kW Torpedo 23/350 | 23l/min. at 350bar | Engine: Kohler KDW 1404 26kW Torpedo 20/500 | 20l/min. at 500bar | Engine: Kohler KDW 1404 26kW Torpedo 30/500 | 30l/min. at 500bar | Engine: Kohler KDW 2204 37.5kW - Dimensions with 680l water tank: 2,300 x 1,310 x 1,310 - Dimensions with 1000l water tank: 2,300 x 1,310 x 1,630 Bhgo2w7wfd - Empty weight: approx. 600 kg - High pressure pump: Comet RW/TW Premium - HD reel: manual or automatic with max. 1/2" or 50 m. 3/8" hose (included) - Water supply reel: manually with 50 m. 3/4" hose - Dies ...
used
V10 - used approx. 32 m³ / 32,000 litres stainless V4A steel tank, transportation tank, insulated, with 3 internal walls, on a steel frame. technical details: capacity: approx. 32 m³ / 32,000 litres material: stainless V4A steel tank, Inox, AISI 316L: WNr. 1.4404 (X2CrNiMo17-12-2), (V4A, A4L) Austenitic, stainless steel, L stands for low carbon content. use: for mechanical components with increased corrosion resistance requirements, especially in chloride-containing media and for hydrogen. AISI 316L is used in a wide range of fields, in the pharmaceutical industry (manufacture of cleaning, disinfection and drying machines), in medical and dental technology, as well as in swimming pool construction. weight: approx. 4 t without frame test pressure: 4 bar dimensions: approx. 2.00 m x 9.00 m; total height incl. frame approx. 2.70 m Other: Used tank in good condition, ...
new
This evaporative dryer was built in Hungary by DKG-EAST RT in 1995. The equipment was transported to Finland, where it was inspected by Finnish Inspecta in 1999. The original purpose of this equipment was to concentrate waste water solution from a molasses production process by evaporating water, but the system was never installed. The certified pressure for the equipment is max 2.0 bar, min -1.0 bar. The input heat for the evaporation comes from steam of 200 °C. The equipment is suitable for similar purposes, concentrating waste water streams from various processes and thus reducing the amount of waste water to handle. Capacity in molasses wash water evaporation: Input of thin stillage: 30.0 t/h, 8.5 % Output of product stillage: 3.54 t/h, 72 % Steam input: 3.9 t/h, 200 °C, 11018 MJ/h Heater 1. Price 90.000 € Nominal heat surface 512 m², actual heat surface 518 m². Max ...
used
Sales are made on behalf of the customer. Professional high-pressure cleaner DYNAJET 500th HELI Blue Performance The No. 1 in efficiency, power and performance. Professionals from all industries worldwide rely on dynaJET's highly efficient high-pressure water cleaners. These high-pressure units impress with their universal application possibilities, extreme cost-effectiveness, absolute reliability, long product life and uncompromising quality. Standard safety equipment offers you and your employees the highest level of safety. The latest generation of DYNAJET high-pressure units offers reduced fuel consumption, lower emissions and improved ease of use. Get efficiency, or even the opportunity to conquer new business areas, in your company. All DYNAJET high-pressure cleaners are comprehensively tested by our quality management before they are delivered. Our product and accessor ...
new
Sales are made on behalf of the customer. Professional high-pressure cleaner DYNAJET 350th HELI The No. 1 in efficiency, power and performance. Professionals from all industries worldwide rely on dynaJET's highly efficient high-pressure water cleaners. These high-pressure units impress with their universal application possibilities, extreme cost-effectiveness, absolute reliability, long product life and uncompromising quality. Standard safety equipment offers you and your employees the highest level of safety. The latest generation of DYNAJET high-pressure units offers reduced fuel consumption, lower emissions and improved ease of use. Get efficiency, or even the opportunity to conquer new business areas, in your company. All DYNAJET high-pressure cleaners are comprehensively tested by our quality management before they are delivered. Our product and accessory portfolio ensu ...
used
1 pc flame pretreatment system with electronic control 1 pc EF 600-1 Burner control consisting of Electrical control with ignition and monitoring device for 1 pc burner, control electronics, control panel with plain text display, Emergency stop setup and interface for external control Mechanical control with Safety valves, gas/air mixers, thermoanemometrial mass flow meters for air and gas, Engine valves, pressure monitors for overpressure and vacuum monitoring and supply air blowers. 1 pcs C24-2300 Film burner, 2200 mm working width, adjustable up to min. 1000 mm with connections for water cooling and water-cooled double T-beam 1 pc spare parts consisting of 2 earth replacement electrodes and 1 replacement fabric Power supply : 400/230 V 50 Hz, 2.5 kVA Gas supply : Natural gas 75 – 100 mbar Heat output : max. 400 kW Gas consumpt ...
new
The new DYNAJET surface cleaning system DFS 500 VAC: With 500 bar and integrated Extraction according to the Venturi principle, the DFS 500 VAC is the ideal tool for fast and efficient cleaning of large areas such as.B. industrial and hall floors, building Forecourts or courtyard entrances. The suction according to the Venturi principle, in which an additional jet of water creates a Negative pressure is generated, which tears the dirty water with it, makes an additional Wet vacuum cleaner with separately required power supply superfluous. Efficient and powerful: Hot water version up to 95° C. Connection for sewage hose on the integrated extraction system. Nozzle carrier for accommodating two high-performance nozzles Form D for maximum cleaning performance. Stepless adjustment between cleaning and extraction capacity Mobile and robust: Three steerable wheels for super s ...
used
Venjakob year of manufacture 1999 Spray guns 4 Water based paint and lacquer and also UV paint acid curing paint? – Not possible now, but can be done, if we change pump, tubes and nozzles Paint recycling - yes Is it possible to apply bets”? Water based? – yes, water based Are the work pieces stackable directly after they come out from the line? (Are they dry so they can be stacked?) – Yes, if we use UV- water based paint but when using normal water based paint or lacquer components must be dried in a shelf What type of products do you run in the line? What materials? – MDF, melamine surfaced doors, components etc. and solid wood components (mainly birch) What are the dimension limitations for the work pieces? – width min/max 20-1200 mm, lenght min/max 350-2750 mm, thickness max 50 mm Spraying machine Venjaob HGS-Duo Venjakob VEN SPRAY DUO Lacquering line sand paint IR UV dry ...
used
Water tanks & extinguishing water tanks USED & RECONDITIONED Muensterlandtanks.de Container and tank trading Call us: 0162 1341979 A used steel tank in the size of 100,000 litres is offered. Volume: 100.000 Ltr. Material: Steel tank tank, material S235JRG2 Tank shape: cylindrical, horizontal, double-walled Diameter 2.90 m, length approx. 15.50 m Exits: Dom on the top Departures top Tank according to DIN 6608 Tanks can be driven over and withstand the earth pressure - plastic tanks are compressed over time! Condition: Tank cleaned from the inside and provided with a new bitumen coating from the outside. Suitable for above-ground and underground storage of water, process water, rainwater, feed etc. Location Ascheberg. Transport can be arranged cost-effectively. The loading of the container on trucks or trailers is free of charge! For use as an extinguishing ...
used
TECHNICAL SPECIFICATIONS Manafacture: COMAC Designation: Dust control system / nebulizer Type: Akkua Jet 65S Version: with 5 m articulated arm, on trailer Year of construction: 2012 Range: approx. 65 m (significantly more in the wind direction) Rotation: 0-360º (hydraulic) Vertical adjustment: -15°/+50° (hydraulic) Area coverage (theoretical): approx. 13,300 sqm Water consumption: from 1,500 to approx. 8,000 L/h Number of nozzle rings: 3 pcs. (separately switchable) Number of nozzles per wreath: 52 pcs. Total number of nozzles: 156 pcs. Fan power: 11.5 kW Water pump power: 4 kW Water filter: at 100 μm (stainless steel filter) Operating water pressure: approx. 15 - 22 bar Connection electrical: 400V/32A CEE Control voltage: 24 V Connection water: 1" F Average air velocity: approx. 38 m/s Air flow rate: approx. 30,000 cbm/h Degree of protection of the machine: IP ...
used
Venjakob year of manufacture 1999 Spray guns 4 Water based paint and lacquer and also UV paint acid curing paint? – Not possible now, but can be done, if we change pump, tubes and nozzles Paint recycling - yes Is it possible to apply bets”? Water based? – yes, water based Are the work pieces stackable directly after they come out from the line? (Are they dry so they can be stacked?) – Yes, if we use UV- water based paint but when using normal water based paint or lacquer components must be dried in a shelf What type of products do you run in the line? What materials? – MDF, melamine surfaced doors, components etc. and solid wood components (mainly birch) What are the dimension limitations for the work pieces? – width min/max 20-1200 mm, lenght min/max 350-2750 mm, thickness max 50 mm Spraying machine Venjaob HGS-Duo Venjakob VEN SPRAY DUO Lacquering line sand paint IR UV dry ...
used
Venjakob year of manufacture 1999 Spray guns 4 Water based paint and lacquer and also UV paint acid curing paint? – Not possible now, but can be done, if we change pump, tubes and nozzles Paint recycling - yes Is it possible to apply bets”? Water based? – yes, water based Are the work pieces stackable directly after they come out from the line? (Are they dry so they can be stacked?) – Yes, if we use UV- water based paint but when using normal water based paint or lacquer components must be dried in a shelf What type of products do you run in the line? What materials? – MDF, melamine surfaced doors, components etc. and solid wood components (mainly birch) What are the dimension limitations for the work pieces? – width min/max 20-1200 mm, lenght min/max 350-2750 mm, thickness max 50 mm Spraying machine Venjaob HGS-Duo Venjakob VEN SPRAY DUO Lacquering line sand paint IR UV dry ...
used
Universal temperature control unit WEINREICH Type WTD 4 Fabr. No.: 11932217 Year of construction 1993 Temperature max. 140C Operating overpressure max. 6 bar Pump capacity 30 l/min. Tank volume 4 litres Heating capacity 4 kW cooling capacity Heat exchanger 15 kW Engine power of the pump 0.37 kW Circulation water Flow + return G 3/8 Cooling water flow + return G 3/8 Total power 4.4 kW Mains connection 380 Volt, 50 Hz, CEE plug - Temperature control medium Water temperature control with actual and setpoint values STÖRK-TRONIC Type ST 96-35.02K- Water circulation pump SPECK - An external cooling unit is required for cooling (the cooled water is fed to the temperature control unit) - mobile on 4 wheels Dimensions L x W x H 620 x 260 x 670 mm Weight 55 kg good condition; used
used
Carel HeaterSteam UR020HL10S isothermal Steam Humidifier Carel HeaterSteam UR020HL10S is an isothermal steam humidifier. It produces steam by heating heating elements immersed in a steam cylinder filled with water. This can be normal tap water or completely demineralized water. The heat generated by the heating elements heats the water up to a temperature of 100 °C. Specifications: Dimensions: (L x W x H): 690 x 438 x 887 mm Weight: 63 kg Steam output: 20 kg/h Power: 15 kW Power supply: 400 V/3 Vapour pressure: 0...3600 Pa Steam connection: 40 mm Water supply connection: 3/4"G outside More items - new and used - can be found in our shop! International shipping costs on request!
used
Process chiller / chiller water-cooled, Type: Aquarius G2 - AQG2 1401, Green Refrigerant R513A, MTA S.p.A. The Aquarius G - AQG2 1401, 2601 are water/water chillers for indoor installation. Shell-and-tube evaporators, Bitzer screw compressors with infinitely variable capacity control, control and switch cabinet incl. Vitaulic couplings. Cooling capacity (kW): 351 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 60.2 Cooling water temp. Exit/Entry (°C): 35 / 30 Volume flow (m³/h): 73 Refrigeration circuit: Refrigerant R 513A Number of refrigeration circuits: 1 Total number of compressors: 1 Power levels (%): 0-25 infinitely variable up to 100 Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW): 128 Max. current (A): 209 Starting Current Circuit (A): 341 Protection class: IP54 Dimensions: Length (mm) ...
used
Process chiller / chiller water-cooled, Type: AQUARIUS PLUS 2 – AQP2 2601 MTA S.p.A. The Phönix AQUARIUS PLUS 2 – AQP2 2601 are water-to-water chillers for indoor installation. Shell-and-tube evaporators, Handbell screw compressors with infinitely variable capacity control, control and switch cabinet incl. Vitaulic couplings. Cooling capacity (kW): 654 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 112 Cooling water temp. Exit/Entry (°C): 35 / 30 Flow rate (m³/h): 134 Refrigeration circuit: Refrigerant R 134A Number of refrigeration circuits: 1 Total number of compressors: 1 Power levels (%): 0-25 infinitely variable up to 100 Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW): 215.03 Max. current (A): 356.88 Starting Current Circuit (A): 602 Protection class: IP54 Dimensions: Length (mm): 432 ...
new
PROFESSIONAL COFFEE FILTER MACHINE COFFEE QUEEN TOWER. Filter coffee machine with vacuum thermoses Coffee Queen Tower is a fast, flexible bulk coffee brewer with a hot water outlet for tea. It features digital display, full and half-brewing function as well as a signal to indicate when the coffee is ready. Brewing can take place on both sides simultaneously and the digital display shows the current temperature, brewing in progress and volume on each side. Characteristics: • Fast and easy to handle bulk brewer with hot water tap. • 2 uniquely designed 5 litre serving stations (vacuum thermoses) with tap, sight gauge and integrated handle grip. • Rotating function for easy handling. • Brewing on both sides at the same time. • Option for full- or half brew and brewing-complete signal. • Full brewing, 10 litres takes approx. 7 minutes. • Thermos with temperature drop o ...
used
The iCombi Classic is the latest combi steamer from RATIONAL. The iCombi Classic 6-1/1 Electric model is a true all-rounder and will quickly become an indispensable helper in your kitchen. It replaces many conventional cooking appliances and is robust, powerful, powerful and efficient. The device is from 2023 and has hardly been used. The combi steamer has been tested in our in-house workshop and is fully functional. The pictured base is not part of the offer, but can be purchased as an option. The price quoted is net plus 19% VAT. Service: We would be happy to put you in touch with a certified Rational customer service throughout Germany. Our service for you: • Manufacturer's warranty until 10/2025 • High-quality branded appliances at fair prices • Professional and competent advice - before and after the purchase • Free shipping within Germany (excl. islands/mo ...
used
Overview The bottle washer was manufactured in 1998 by the German company Krones. It is located at a German mineral fountain and is part of a line that has been shut down because the operator will be bottling in glass in the future and no longer in PET. The bottle washer is still assembled. Technical data Capacity: 44,000 bph Control range: 17,000 - 50,000 bph Bottles per row: 35 The Machine in Detail / Equipment Features Residual emptying Pre-soak/ pre-caustic High pressure pre-spraying with automatic screen discharge Machine multi-part with 3 shocks Pre-soak, water zone incl. head section Discharge in V2A Post-leach immersion bath KES Post-leaching area in V2A Bottle cell in steel with plastic mouth Feeding table in VA Insertion finger feed with safety shutdown Discharge with pick-up finger and safety cut-out Muzzle basket control at the ejector Shard ejector behind the d ...
new
Unused and not yet fully assembled two-chamber industrial washing machine, is offered very far below original price! Technical data according to manufacturer's specifications: Dimensions Width = 3278 mm Height = 3350 mm Depth = 3924 mm Weights Total weight = 6500 kg Ab. Gross batch mass = 500 kg Required floor load capacity = 1500 kg/m² Washing medium Operating medium = demineralized water Water connection = 4 bar, 3/4", cold Working temperature range = 10 -70°C, adjustable Flood pumps = 2 centrifugal pumps, flow rate per pump approx. 2 mn³/min, connected load per 4 kW Water Quantity Washing Process Chamber 1 = 3.9 m³ Water level measured from above Water level chamber 1 = max. 250mm, nominal 100-200 mm, min. 50 mm Heating Heating basin = 10 cartridge heaters, electric Total connected load = 85 kW Nominal voltage = 3 x 400 V AC~ PEN Control volta ...
used
Dishwasher / Quaker No. 1 (complete) - as in the picture: Manufacturer: TOPLINE Catalog number: E/473/O/2.12 Year of purchase: 2017 Quaker No. 2 (no bowl and rods) - to be completed or for spare parts Manufacturer: TOPLINE Catalog number: E/346/O/2.11 Year of purchase: 2012 The dishwasher performs a special washing process involving the action of hot steam from distilled water or nitric acid. Particularly useful in the laboratory using AAS, ICP and ICP-MS techniques for trace analysis. It allows you to wash glass, ceramic, Teflon (PTFE/PFA), quartz and borosilicate glass dishes. The heating element is a heater with a power of 1800 W. There is a tank on it, which is filled with water or nitric acid. The evaporating liquid is sent in the form of steam to the washed dishes through glass pipes. This steam can be reused after it has been liquefied. The entire device should be ...
used
Used CIP station composed of: - 4 tanks with a capacity of 3000 L each: fresh water, acid, lye, hot water - 2 disinfectant tanks - 2 steam-water heat exchangers for heating media - 1 steam-water heat exchanger for heating secondary water - 2 gu30/30 pumps, 1 gh 20 pump - 1 control cabinet – Siemens PLC control - pipes + valves + meters + sensors
used
Overview This filtration unit was built in 2016 by Czech manufacturer Bílek Filtry. This machine is like new as it was barely used. Microfiltration can replace pasteurization of the product. This results in lower acquisition costs, lower operating costs and no influence on the taste of the beer due to pasteurization. Techn. Details Max. output when the end elements are fitted (depends on the filtered beer and parameters of the filling line): 18 hl/h (Prepor NG elements: - absolute capture of yeast - reduction of bacteria) 12 hl/ h (Bevpor PH elements: - absolute capture of yeast - absolute capture of beer by harmful bacteria) Number of heated containers 1 Container volume 120 l Heating power kW 12 Water filter assembly Components Micro-filter assembly Consists of two filters - the FMS pre-filter and the FMS final filter Mounted on a common frame and connected by a pipe with fittings Fil ...
used
Aseptic Production and Filling Line for Non-Carbonated Drinks 2500 bph This production line is designed for the preservative-free production and bottling of all kinds of heat-treatable, non-carbonated soft drinks, e.g. vitamin drinks, filtered/low-fiber juices, tea-based drinks (brewed from real leaves), plant-based milks/drinks, etc. This line is used for green tea based drinks, flavoured with various fruit juices. Production equipment includes two tea brewing vessels, mixing tanks, UHT pasteurizer, product filter, water treatment plant with reverse osmosis, oxygen generator and product tank which are the part of the delivery. UHT pasteurizer is heated with thermal oil boiler. The filling line is semiautomatic (blow moulder operation, empty PET bottle feeding and palletizing is made manually). Current owner designed the line from individual machines and rebuilt aseptic filling block ...
used
Water Chiller Kreyer MCK 15.4 kW – 2020 Very good condition water chiller made by German Guantor in 2020. It can be used for cooling and heating of must, wine, beer and other liquids such as cider, carbonated soft-drinks, distillates etc. It has been used less than two years and thus having very low operation hours. Kreyer MCK 110 is very compact water chiller and it consists of a cooling unit in the upper part and a pump plus isolated water tank (made of stainless steel) in the lower section. The cooling device itself is equipped with a high-efficiency microchannel condenser a very high-performance plate-heat-exchanger. It is also equipped with an electric heating rod for heating of products. Technical characteristics Manufacturer: WGW-Guantor GmbH Manufacturers type: Kreyer MCK 110 Manufacturing year: 2020 Cooling capacity: 15.4 kW at max 32°C ambient temperature C ...
used
Water Chiller Kreyer MCK 33.5 kW – 2019 Very good condition water chiller made by German Guantor in 2019. It can be used for cooling and heating of must, wine, beer and other liquids such as cider, carbonated soft-drinks, distillates etc. It has been used less than two years and thus having very low operation hours. Kreyer MCK 271-W is very compact water chiller and it consists of a cooling unit in the upper part and a pump plus isolated water tank (made of stainless steel) in the lower section. The cooling device itself is equipped with a high-efficiency microchannel condenser a very high-performance plate-heat-exchanger. It is also equipped with an electric heating rod for heating of products. Technical characteristics Manufacturer: WGT-Guantor GmbH Manufacturers type: Kreyer MCK 271-W Manufacturing year: 2019 Cooling capacity: 33.5 kW at max 32°C ambient temperature ...
used
CNC laser cutting Bysprint 3015 Bylaser 2200 used very little, only for prototyping. Working range: X-axis - 3000mm Y-axis - 1500mm Z-axis lift - 70mm Machining accuracy: VDI 3441 machining tolerance ± 0.1 Finding tolerance ± 0.05 Edge detection accuracy: Detection tolerance ± 0.05 Finding tolerance ± 0.2 Load bearing capacity: Interchangeable lifting table 890kg Fixed plate table 3500kg Power supply to the machine: Three-phase, + PE 50/60Hz electrical connection. Machine: cos. 0.91 , 100AT , 4 poles 3x400/480V Air emission filter: cos. 0.8 , 25AT , 4 poles 3x400/480V Cooling water: Water flow rate 95 Water starting temperature 19°C Water temperature constant ± 1 K Impurities
used
Used Bottle Washing Machine KLINGER S16 2 90 speed 7000 BPH Model S 16 2 90 Year 1993 Production capacity 7 000 BPH with 2 L bottles Basket plastic with the possibility of washing bottles with max diameter of 95 mm Type of wash suitable for washing glass bottles through caustic baths Dimensions and weight L 9 x W 3 30 x H 3 05 m 19 000 kg Material stainless steel Description of the washing cycle 1st wash Capacity 45 L Maximum allowed operating temperature 150 C Maximum allowed operating pressure 5 bar 2nd wash Capacity 150 L Maximum allowed operating temperature 110 C Maximum allowed operating pressure 2 bar Technical data Nominal capacity 7000 BPH Range of control 4000 8000 BPH Total washing time 7 1 min Time of cycle 8 2 sec Scheduled execution time 16 min Bottles per row 16 Total rows 117 Housings 1600 Loaded rows 100 Preheating Total time 3 min Effective treatment time 2 6 min Sodium ...
used
Used Filling Line Sidel For Water 2014 Air Compressor ABC 3HA 4 TFK LT 200kw Air compressor Low Fusheng SA75 75KW Ice water Machine Nanjing Wuzhou LSBLG 1290DT 1256 8KW 298 8KW Ice water machine Shanghai Baoqing WA 78W PT4EN I 49kw Blow Molding Machine SIDEL SBO20 Blower Capacity 36000P H Power 406KW Spindle heads 262 pcs Manipulator 10pcs each Blow moulding satation 20 pcs SIDEL Filling Machine Capacity 36000P H Power 35KW Filling Valves 60pcs Capping heads 15 pcs SIDEL 36000 bph Labelling Machine Capacity 600B min Power 50KW Vacuum drum 1 set Scaleplate 2 pcs Capping heads 20 pcs SMI Shrink Wrapper Capacity 35 P Min Power 75KW Divider 4 sets Infeed 4 sets Former 5 sets TW Benifit Palletizer with Conveyor and Divider Capacity 35 P M Power 25KW Used Filling Line Sidel For Water 2014 this complete line for water is in excellent conditions and ready immediately for sale [...for more inform ...
used
Plant for rinsing and chemical regeneration of a beer post-filtration., Additional title: cleaning system for secondary beer filtration, Volume caustic vessel: 600 l, Volume disinfektion vessel: 1000 l, Volume water vessel: 1000 l, Material: caustic vessel: 1.4401; disinfection/water: 1.4301, Base construction: part for caustic: on frame with 4 dome feet; disinfection/water: on frame with 6 dome feet, Features: part for caustic: caustic vessel, thermometer, heating coil, dosing vessel, conductivity measuring device, centrifugal pump disinfection/water: disinfection vessel, water vessel, Hilge Hygia II centrifugal pump: 4 kW, 20 m³/h, Periphery: control cabinet with Simatic OP7 touchpad
used
Disinfecting lock 8 pcs. They include: 1 Sole and upper washer – walk-through – angled brushes 550506 quantity 2 pcs. Data : Producer: AWE POLAND Sp. Z O.O. DTR -Yes Year of production: 2015 The device is made of stainless materials. Six rotating brushes: two horizontal brushes, four diagonal brushes with variable diameter. Washing shoe uppers up to a height of 350 mm. Water supply: 1/2. Water drainage: PVC ø 50 mm. Power supply: 400V, 50Hz. Automatic collection of cleaning fluids. The switch is located in the photocell 2 Sole washer, quantity 3 pcs Year of production 2015 Producer: AWE POLAND Sp. Z O.O. DTR -Yes Two rotating washing brushes, 900 mm long. The device is made of stainless materials Sole disinfection tank up to 3 cm high and drip grate. Water supply: 1/2. Water drainage: PVC ø 50 mm. Power supply: 400V, 50Hz. 24V control, IP67. Drive: 2 ...
used
1 Sole and upper washer – walk-through – angled brushes 550506 quantity 2 pcs. Producer: AWE POLAND Sp. Z O.O. DTR -Yes Year of production: 2015 The device is made of stainless materials. Six rotating brushes: two horizontal brushes, four diagonal brushes with variable diameter. Washing shoe uppers up to a height of 350 mm. Water supply: 1/2. Water drainage: PVC ø 50 mm. Power supply: 400V, 50Hz. Automatic collection of cleaning fluids. The switch is located in the photocell 2 Sole washer, quantity 3 pcs Year of production 2015 Producer: AWE POLAND Sp. Z O.O. DTR -Yes Two rotating washing brushes, 900 mm long. The device is made of stainless materials Sole disinfection tank up to 3 cm high and drip grate. Water supply: 1/2. Water drainage: PVC ø 50 mm. Power supply: 400V, 50Hz. 24V control, IP67. Drive: 2 x 0.25 kW, IP55. Washer width: 850 mm. Switching ...
used
Belt press POWERPRESS 400 is designed for pressing fruit, berry and vegetable mass. Fruit mass is placed on the belt which presses it against cylinders + Fruit and Vegetable Washer Elevator Mill MAXIMILL 1000. # Pour jus de pomme, jus de raison, jus dorange, jus de poire, jus dananas, etc. The obtained juice flows in the collection tray under the press. The pressing process is continuous. Capacity: 400 kg/h The most evolutionary feature of our Belt press POWERPRESS line is integrated pump and juice collection tank into the press itself. That means that you save money and do not need an additional juice collection tank and pump which otherwise would use much space and money. There is a filtration sieve integrated into the juice collection tank. Because of that the belt press 400 filtrates the juice even during the pressing stage providing cleaner and more pure product. Bel ...
used
TECNA 4608N spot welding machine which was built in 2008 in Italy is used for precision welding of two sheets of steel or aluminium with a maximum thickness of 4 mm each. During the machining process, the electrodes heat the workpieces until they reach a plastic state in order to become one inseparable piece after cooling. The adjustment of arm reach and electrode stroke enables adaptation of the machine to the user’s individual production requirements. The 4608N resistance welding machine is equipped with a state-of-the-art TECNA TE90 Mark II microprocessor controller, designed to ensure a smooth and uninterrupted welding process. The control system enables the programming of 12 different process parameters and control of the SCR thyristor, responsible for regulating the welding current. The offered TECNA spot and projection welding machine also comes with, among others, a set of e ...
used
Used UBE OMNI-MIX 130-DWF High Capacity Carbonator/Proportioner Omni-mix high capacity carbonator and proportioner. The OMNI-MIX proportioner has been designed to provide accurate and repeatable proportioning with pinpoint adjustment capability for the ratio and flow rate while in operation. The water and syrup are pump fed to the OMNI-MIX. The ratio is controlled by a fixed syrup orifice and an adjustable water orifice. The flow rate is controlled by a pressure differential between the water/syrup reservoirs and the mix reservoir. A mix pump transfers the mix product to the carbonator/cooler tank. Manufacturer: UBE Model: OMNI-MIX 130 DWF Serial No.: 2035 Year of Manufacture: 2000 Approx. Capacity: 50,000 litres/hr Previous use: PET Line Operating Conditions: As the water and syrup reservoir may operate with pressures as high as 15 PSIG, the water and syrup line pressu ...