water treatment used for sale

Nijhuis Water Technology BV waste water system, type: NWT 198105, Varisco pump, type: N8N6 32-26 325, serial number: 909-2008, 15 kW, total dimensions: 3750 mm x 2250 mm x 3500 mm.

Waterjet CLASSICA CL 610 was built in 2012 by Waterjet Corporation s.r.l. The machine allows to cut sheet metal with a thickness of 180 mm on a working area of size (L x W) 3400 x 2000 mm. The water cutting machine is controlled by a S 510 CNC controller and its total weight is 3000 kg. Technical data of the CLASSICA CL 610 water cutting machine - CNC control: S 510 - cutting area (length x width): 3400 x 2000 mm - maximum cutting thickness: 180 mm - accelerated feed: 0 – 30 mt/min - positioning accuracy: ± 0.075 mm - repeatability: ± 0,05 mm - dimensions (L x W x H): 4500 x 2300 x 1800 mm - weight: 3 000 kg

Used Waterjet Flow 7 XS - 55 waterjet cutting machine stainless steel tank, overhauled pump, and updated software.

This Waterjet Suprem Waterjet cutting machine was manufactured in the year 2017 in Italy and has 662 production hours. It is equipped with a Waterjet control unit.

Waterjet DX 510 / waterjet cutting machine / 5-axis, Year of construction 2017, CNC control, Travel X/Y/Z 3350/1600/180 mm, Working range A axis +/- 69°, Travel C axis rotation axis 360° unlimited, Laser Protective Barriers, Auto. Desilting system, Underwater Cutting System, Full 3D Software, High-pressure transmission pump 4130 bar, Air/oil cooler, Accessories

The best way to own a HPLC mass spec in your lab! fischer analytics - Quattro series tandem mass spectrometer system Waters Quattro Premier XE very sensitive and reliable spectrometer, comparable with AB Sciex 4000 or 5000. CMC nitrogen generator NGM-11 spare filter elememnts Edwards E2M28 foreline pump WATERS 2695 HPLC system WATERS 996 PDA detector unit is sold as tested, meets all specs!

used Watermaster Classic suction excavator / dredger construction year: In 1993 working weight: approx. 19 metric tons transport length: 12.4 m transport height: 3.2 m transport width without side pontoons: 3.2 m pontoon frame height: 1.2 m spoon: 360 l shovel: 700 l

The WS 316 SR is the ideal sampler for eliminating any risk of crosscontamination, as the entire system can be rinsed after the taking of each sample. It is also well suited to the sampling of very dirty or greasy sample media, as warm water rinsing is also available if desired

Te Koop: Ultra Filtratie in 40 foot container: Type: HWUF 10060 UF/MB/10 Cap. ongeveer 45 M3 / uur. Membranes 10 pieces (2 x 5). Type IMT 10060/UF / MB capillary seven bore.

Technical specifications: automatic raw water supply: Exchange pump, frequenzgeregeltFördermenge: 40 m ³/hFörderdruck: barLeistung 2.5: 7.5 kWVorfiltration: Selbstreinigender filter with automatic SteuerungFilterfeinheit: 300 µmMaximaler flow rate: 40 m ³/hFlockungsstufe: flocculation tank: 2 x 0,5 m³ (material PP) charging pump, frequenzgeregeltFördermenge: 40 m ³/hFörderdruck: barLeistung 2.0: 5.5 kWRührwerke FlockungsbehälterDosierstelle for flocculant: static mix / Rohrflockulator (material PP) ) Ultrafiltration: number of UF modules: 8 Stck.Modulanordnung in the rack (x-series): 2Filterfläche of the UF modules: 60 m ² Backwashing and chemically supported backwash: Backwashing medium frequency-controlled RückspülpumpeNeutralisation: neutralisation tank: Material PENutzvolumen: 5.0 m³ material, shaft and stirrer: beschichtetDosierstationen steel: ...

A mobile ultrafiltration system is sold in a 20ft container with equipment: - Ultrafiltration modules type dizzer CL (Inge GmbH) - Backwash template 2.6 m3 - Pre-filter 300 ?m - Measurements for turbidity, conductivity and pH - PLC type T-Box for fully automatic control of the system - Operation of the system on site via touch panel as well as remote access via based visualization - automatic chemical dosing Additional additional modules can be purchased as an option: - 20ft expansion container with 12 additional UF modules - 20ft container with sewage and neutralization tank

Qty. 1 Second-hand Sendzimir reversing cold rolling mill Mfc.: Waterbury Farrel Type: WZS- Reversing - Sendzimir Rolling Mill type: ZR – 23M – 31”, reversing Z”, 1 – 2 – 3 – 4 Built: 1977 Modernised in 1991 Capacity: approx. 50 000 T/annum Strip width: 370 – 740 mm Strip tension: controlled up to 10 Tons Thickness: Entry: 3.5 mm Exit: 0.20 mm Speed: 183 – 368 m/min. Min. exit thickness of material M70-A: 0.04 mm Last pass from 0.12 to 0.04 mm Qty. 1 Second-hand roll grinder Mfc.: Landis Type: L-28A Roll dia.: 40-100 mm Roll length: up to 1500 mm Qty. 15 Containers

Pharma pure steam generator. Volume 35 / 284 l. Temperature: 184° / 165° C. The system is equipped with a control panel SIEMENS (Simatic). Inc. spare parts (filter etc.).

Since we have focused our -fischer organics- laboratory service more on peptides / HRMS, we would like to hand over our SFC. The system has the complete equipment, The original price in 2012 was over 250,000 euros net! - Mass detector QDa - Backing pump RE6 - Acquity PDA detector - Acquity Pillar Manager - Acquity Binary Pump 1000bar - Acquity Autosampler - Isocratic UPLC pump - Convergence Manager

Well pump, centrifugal pump, water pump RED JACKET UMP i50S3-S diameter. Ø 120 mm motor: 1.2 kW 220 V

PRESS DESIGN   drive system: eccentric / crank   number of slide actions: 6

PRESS DESIGN   drive system: eccentric / crank   number of slide actions: 6   table cushion: yes 6 stations plus auxiliary station Used for eyelet production - tooling still mounted

Waters Acquity UPLC-MS System, Used Acquity UPLC-MS System by Waters from 2009, used very little, with systematic proof of maintenance, from a large pharmaceutical company, with 6 months warranty and training and installation at the customer's site. . The system is sold with an additional set of spare parts in the form of an identical UPLC system (without MS). Each system can be viewed and tested in operation. The UPLC-MS system consists of the following parts: - SQD mass detector - Sample Organizer - Sample Manager - PDA detector - Binary Pump Manager - Column Manager Price complete system with additional modules as spare parts

Welding Width: 400 mm

Water jet cutting system Waterjet Classic 4000 X 3000 double head model Cnc esa s 510 industrial pc with watered - cam software with automatic nesting KMT streamline sl-v 50 oem pump Dirt separator Workbench height 900 mm 300 kg abrasive tank with mini dispenser Machinery compliant with CE regulations Complete osmosis plant for water production Pump operation real hours 529 Operation real hours in cut 429 Machinery in perfect working order and use. Available for any test Length 4000.0 Width 3000.0 Height 900.0 Weight 5000 Kg

We offer a used Waters MV-10 ASFE system. It is a full set without installation certification and software license. Information from the manufacturer: The Waters® MV-10 ASFE® System is the first Supercritical Fluid Extraction (SFE) system offering accelerated, multi-vessel sample extraction, resulting in a faster selection of sample matrices. Manufacturers : https://www.waters/waters/en_US/MV-10-ASFE-System/nav.htm?cid=13466154 9&locale=en_US

Qty. 1 Second-hand steel strip production plant The plant consist of below lines: 20-High Sendzimir Mill Mfc.: Waterbury Farrel Built: 1960 Strip width: 330 – 660 mm Thickness Entry: 4.0 mm Exit: 0.076 mm 2-High Temper Pass Mill Mfc.: United Eng. & Foundry Co. Built: 1960 Strip width: 400 – 630 mm Thickness Entry: 1.6 mm Exit: 0.25 mm Tension Leveller Mfc.: TBA Built: 1982 Strip width: 500-1067 mm Thickness: 0.08-0.3 mm Tensile strength: 30-75 kg/mm² Bright Annealing Furnace Mfc.: Salem & Herr Equipment Built: 1960 Strip width: 150 – 610 mm Thickness: 0.254 – 2.7 mm

Nijhuis Water Technology BV flotation washer, dimensions: 3800 mm x 2550 mm x 2500 mm. Incomplete.

PRESS DESIGN   drive system: eccentric / crank   number of slide actions: 10 SLIDE   stroke rate (max.): 110 /min 10 stations + 1 auxiliary 5 ton per station Distance between stations: 54 mm  (2-1/8") STROKE OF CAMS (STANDARD) #1 25-35 mm  (1- 1-3/8") #2 to #10  25-41 mm, (1 - 1-5/8") Speed: 110 SPM

Used equipment for the treatment and the preparation of water It is a reverse osmosis that produces a filling water called TABLE WATER Manufacturer UAT UNIVERSAL AQUA TECHNOLOGIES INC USA Model TP 110K Year of production 2001 Capacity 12 000 L h Operating hours 9 810 Volts 380 Hz 50 Ph 3 Description of equipment MM FILTER INPUT WATER TREATMENT REVERSED OSMOSIS UAT UNIVERSAL AQUA TECHNOLOGIES INC USA 2001 DEMINERALIZED WATER TANK 12 m3 PUMPING BLOCK FOR MINERALIZATION MINERALIZER MINERALIZED WATER TANK PUMPING BLOCK FOR WATER DISINFECTION AND DELIVERY TO FILLERS Technological description of table water production a General The plant for the production of table water has a capacity of 12 000 l h It consists of Sand filter Device for reverse osmosis TP 110K Product water tank Pump for mineralization of product water Mineralizer Mineralized water tank System for ozonation disinfection of min ...

Water treatment plant Manufacturer BWT Type Osmotron 2000-PH-S System was overhauled in 2020, new control cabinet from 2021 Year of construction 2000 Water treatment plant BWT Osmotron plant of BWT Pharma & Biotech GmbH for 2000l/h Aqua Purificata production

Containerrised water treatment installation . consisting of three 20 FT offshore containers build onder DNV One for the power supply with a Scania engine type DI 16 55 M 532 KW 1800 rpm connected with a Leroy Somer generator type M 47.2L9C6S4 including switchboard with circuit breaker and fuel tank . Two containers with the Hatenboer water treatment installation capacity 200 M/ day photo's from the installation available . infoperfectmachinery.nl or +31 78 6158040 Whatsapp +31 6 53549259

Water treatment plant Manufacturer BWT Type Septron Line 40 VAL Year of construction 2013 Capacity: 900 L/h ultrapure water Inlet pressure: 6 bar(g), raw water pressure 4-6 bar, raw water flow 1300 l/h Maximum temperature: 50°C Various electrical individual connections

WATER TREATMENT PLANT CONSISTING OF WELLMATE WATER SOFTENING & REVERSE OSMOSIS SYSTEM MERLIN RO-EASY 40 S. No.: RO-EASY40 – 151557/201 Equipment / Additional information: V 230 // Hz 50 // A 2,4 // KW 0,55 Permeate output at feed water temperature 15 ° C and 4 bar flow pressure: 40 I / h (incl. Pressure vessel 25 I)

Water filter station, water treatment with diesel engine and compressor in container used manufacturer: Type: WFS 3/76 Year of construction: 1977 The operation can be done with third-party network or own network via: Diesel engine FIMAG Finsterwalde Type 6-1521/104-0 10 kVA 14.8 A 390 V 50 Hz follow Total dimensions: approx. 6 x 2.4 x 2.4 m Changes and errors in the technical data, information and prices as well as intermediate sale reserved.

Ultrapure water treatment, EDI SNOWPURE / ELECTROPURE / EDWARDS EDI XLBOC-500 YL3201003 used, tested ! Dimensions: 570 x 420 x 220 mm

Description: Waste Water Treatment System Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

M. Number: 405198 Item: 381021 Power supply: 230V / 50Hz Power: 0.55KW Max pump pressure: 14 bar Max operating pressure: 14 bar Mediumstem min / max: 5/35 C Min concentrate flow: 84l / h Permeate Max: 250l / h Permeat backpressure max: 0.3 bar

- Oil extraction unit KAISER, 100-400 l/min - Screening belt, belt width: 800 mm, length: 2,000 mm, SEW-Eurodrive 0.37 kW - Monopump NETZSCH NM045BT, YOC 2001, GETRIEBEBAU NORD Gear Motor - Rotor of progressing cavity pump - Peristaltic pump DEPA ELRO ME5 - Gate valve, length: 275 mm, Ø 200/80 mm (outside/inside) - Control cabinet - 2 x agitators - 2 x stainless steel pipe with branch (approx. 1 m long)

Output: 2000l/h, efficiency/yield: 70%, feed water pressure: 3-6bar, operating temperature 5-35°C, length: 850mm, width: 2450mm, height: 1950mm, with documentation, without storage tank, inspection is possible.

Flow rate: 48,000l/h, flocculant: WINfloc 7418 CF, max. capacity reaction tanks: 4160l, control: PLC 7/15 inch, connected load: 6kW, length: 2180mm, width: 2500mm, height: 3100mm, with documentation, on-site inspection is possible.

Treatment bath with cooling pipes. Belt discharge and drying blower

Ladies and gentlemen, Pictures and further information on request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire transport process is carried out at the buyer's own expense and at the buyer's own expense. We cannot be liable for personal injury and damage to property in the case of dismantling by the buyer in this context. Place of jurisdic ...

: Plant used separation / separation system Manufacturer: Schauenburg Type: MAB 125 Engine type: 1130-1190 Year of construction: 1992 Power: 125 m ³/h Speed: 1000 rpm KW: 2.7

Through annealing furnace PADELTTHERM Type: Raw 50 X 15 X 150 - E Circuit diagram no.: 6 - 16-4 BP Order No.: 9070/4 Year of construction: 2000 Rated voltage 400 ~ V Control voltage 230 V Nominal power 32 KW Protection class IP 54 Nominal current 58 amp. maximum temperature of 1050° C Weight 2250 kg very little in a University used.; good condition, like new

System Components: ​ Control Panels (in control room) Washing Unit - 1 set Control Panel Centrifugal Ventilator - 22KW Booster Pump System - 15HP Pre-Heater - 780,000Kcal/hr - 1 set Control Panel Shot Blast Machine - 1 set Control Panel Bucket Elevator - 2 sets Air Receiver Tank - 3cu.m Dust Collector - 1000cu.m/min Dust Collection Buckets Water Paint Booth - 1 set Control Panel Air Motor - 100PSI - 3 units Air Diaphragm Pump - 1 unit Mixing Bucket - 2 units Paint mixing tools and jigs Activated Carbon Tower - 400cu.m/min 1 set Dry Oven - 300,000Kcal/hr Control Panel Marking Unit - 1 set Control Panel Rectifier IN/OUT Conveyor - 4.6MW x 230.95ML Control Panel ​ Accessories/other items included: Portable Vacuum Recovery - 1 unit Fan - 11KW; 3P; 440V; 60Hz Exhaust Fan - 1,646W; 220V CO2 Mag Welders - ProPAC600A - 3 units Gouging Machine - LH ...

1 - Aerzen GM7L - Rotary lobe blower unit Delta Blower generation 5. Positive pressure. Suction pressure: 0,613 bar Discharge pressure: 1.013 bar Power : 7.5 kW Flow rate: 420 m3/h Oil free ATEX classification Weight : 381 kg Equipment sold with original filter + a new one. Blower with silencer, frame integrating a resonance absorber, machine feet, connection to the body with silencer for non-return valve, safety valve, vaccuostat with pressure gauge. 2 - Infastaub MKR 0-1/20 - Secondary safety filter Temperature: 0?C/+40?C Filter surface: 20 m2 Volume: 360 m3/h Structural resistance: - 500 mbar Filter quality: H14 Filter body : Stainless steel ATEX classification Equipment sold with original filter + a new one.

Manufacturer: Infastaub GmbH Model: Infa-mat AM 451 S Year: 2015 Type: bag / pocket filter Filtration area: 45 m2 Air volume: 4020 m3/h Housing resistance: up to +/- 35 mbar Fan power : 5,5 KW Soundproof housing Automatic and mechanical cleaning of the filters after the process by a vibratory drive Dust collection: bucket

Inv. Num. : 6043 Type: PRETREATmaker IV Producer: SCHULZE Generated: 2020 Parameters: Printer accessories for digital textile printing

SEKWANG Shot Machinery Co. Ltd SKHSS-4600 PRE-TREATMENT SYSTEM (2006) Including: -Main Pre-treatment system -Main control panels -Conveyor -Compressor -Dust and Fume Collector -Pre Heater -Shot blasting -Vacuum Recovery -Welding Machine -Blower -Mixing room Including an assortment of spare parts : Bearings Chain Belts Manganese Filter Sacks, etc. Make SEKWANG Shot Machinery Co. Ltd Model SKHSS-4600 Year 2006

Was used for cleaning perforated metal sheets, including documentation, without accessories or spare parts.

Output: 300l/h, output: 300l/h, suitable for the treatment and reuse of rinse water, wash water, paint rinse water, cleaning solutions, waste water from crack testing and other liquid production residues.

Working width: 2500mm, with controls.

With High-Voltage Generator Tantec HV2002, connected load: 1100W.

Qty. 1 Second-hand homogenising chamber furnace Mfc.: Schmitz + Apelt LOI Type: Chamber furnace – GDKV 195/267/770/1280 Built: 1996 Stopped: 2019 Heat treatment of Al profiles! Operation temp.: 160 – 270 °C Max. temp.: 300 °C Natural Gas heated Scope of supply: Frame of the furnace Heating facility Air circulation facility Entry & Exit furnace doors Separator slide Measurement & Control device