135,929 used machines on RESALE, but how to find them? Machine Search
HANDTMANN VF-620/VF-628/VF-630
Including Alpha Machine Vision Solution lid inspection system, Including tool trolley, Capacity: 18000 - 22000 cups/hr, Cups: round Ø 55 mm, round Ø 65 mm, Seal: aluminium, Compressed air: 6 Bar, 800 l/min., Water: 3 Bar, 1.5 l/min., Power: 3 x 400V, 50Hz, 15kW, Dimensions: 4250 x 2000 x 1800 mm, Weight: 3500 kg
Filling, portioning and linking, Including 859 linker and DHV937 casing holder, Only 52 running hours!, Pump capacity: max 2300 kg/hr, Hopper: 105 litre, Vacuum pump: Busch 16 m³/h, Power: 3 x 400V, 50Hz, 5kW, Dimensions: 900 x 1200 x 1950 mm, Weight: 425 kg
Line is consisting of:, Handtmann portioning device for ground meat, Type: GMD99-2, Serial number: 1189, Year of construction: 2005, Air pressure: 7 Bar, Tramper denester, Type: D-3100, Serial number: 002, Year of construction: 2011, Capacity: 20 - 30 cycles/min., Dye: 5x R24, 3x R15, Air pressure: 6 Bar, Dimensions: 3250 x 2200 x 2000 mm, Weight: 310 kg, Tramper tray filling system, Type: TAS01, Serial number: 001, Year of construction: 2011, Dimensions: 5200 x 850 x 1600 mm, Weight: 900 kg, Tramper traysealer, Type: S-460, Serial number: 001, Year of construction: 2012, Trays: R15 & R24, Capacity: max 15 cycli/min., Air pressure: 6 Bar, Dimensions: 3100 x 1450 x 2150 mm, Including 2 tool trolleys, For vacuum and gas flush, Including Witt gas mixing station
Frey K 120E Filling Machine, Vacuum Filling Machine, with twisting gear, new vacuum lid (the photos are still the old one), Connection 400V, weight approx. 470kg, good used condition, functional
The Handtmann VF50 is a smaller sized vacuum portioning machine making it suitable for butchers, pet food producers, small goods producers looking for a reliable and fast way to accurately portioning, straight filling product such as mince& sausage meat, cookie dough as well as being capable of handling a wide range of products. Filling capacity 2,600 kg/h Filling pressure up to 55 bar Portioning and linking capacity: 25 g = 420 port./ min 50 g = 350 port./ min 100 g = 250 port./ min 200 g = 160 port./ min Portioning range: 5 – 100,000 g Hopper Capacity: 80 litres Control system: Digital Monitor Connected load: 4 kW Weight:450kg Dimensions: Width:70 Length: 90 Height: 165
Used Karl Schnell 595SE vacuum stuffer designed for industrial meat processing operations. This machine is used for precise portioning and vacuum filling of ground meat mixtures into casings or containers, helping reduce air pockets and improve product consistency and density. Built with durable industrial components, the 595SE is suitable for sausage production and other processed meat applications in commercial food processing facilities. The vacuum filling system helps maintain product quality and efficiency during high-volume production. in great working order, the loading is for standard loading buggies 400 L capacity. Can ship anywhere
Simon Freres Butter bulk packing without kneading effect or damages to the structure. Automatic filling of butter into carton and cases between 5 to 25 kg. Currently this machine is set for carton boxes of 10 kg butter blocks. Dimensions of the forming head: 120 mm x 90 mm. Extrusion length of the block is adjustable on time. Feeding by a big volume feeding hopper with 2 large diameter augers / screws, all made out of stainless steel. Infeed conveyor and manually position the folded carton box in front of the extruder. Manual close the box and move it forward on the non driven outfeed conveyor. Motor: ± 3 kW - 380 V - 50 Hz. New simple control panel with universal timer for adding the dosing time, emergency stop and main switch. Manual available in French language., Type of Machine: Butter Packing Machine, Capacity: up to 1.500 kg of butter per hour (output), Motor: 3 kW - 380 V - 50 Hz ...
The Ilpra FS 6000 is equipped with twin stages of all stations, the filling heads are built to fill various products ie. Yoghurt, Cream, Sauces, Milk, Fruit pieces of 1 cm, Custard, Etc. The easy maintenance makes these machines highly recommended in production floors keeping productivity at a steady pace. Ilpra cup fillers are mainly driven by a main motor and signals for the air cylinders to take action on each station. The filling volumes depend on the clients needs, therefor these have a standard filling volume of 50-500 ml per cup, we can enlarge the filling volume by increasing the diameter of the filling cylinder on request., Make: Ilpra , Model: FS 6000, Capacity: 4800, Year of Manufacture: 2003, Filling Volume: 50-500 ml per cup , Cup Dispenser: Automatic twin dispenser , Filling: Twin Filling Heads , Filling Specs: Fruits up to 1 cm pieces , Sealing: Twin Heat Sealing Station , ...
Vacuum Filling Machine Handtmann VF 50 Main characteristics: • Designed for automatic dosing, twisting and filling of various mixtures under vacuum • The portioning is precise and varies from 5 to 10000 grams \ • The machine is made of solid stainless steel construction • Equipped with microcomputer control • Productivity: 2600 kg. / hour • Pressure: 55 bar • Power: 4 kW • Dimensions: approx. 1200 /800 /800 mm. • Weight: approx. 450 kg. • 1 year warranty
Vacuum Filler HANDTMANN VF 80 The machine can be used for Portioning, Dosing and Twisting. It is completely factory renovated by MM SERVICE EOOD, with 1 year warranty, delivery, installation, samples and training.
Thimonier THB9200 Vertical Form Fill & Seal Filling Machine (2021) 50-500ml berlingot (pillow-style triangular pouch) Liquids & viscous products (including corrosive detergents) Auction-ID: A1-48805-2
– 240 liters funnel – Designed for automatic dosing, twisting and filling of various mixtures under a vacuum – Portioning is precise and varies from 5 to 10000 grams – The machine is made of solid stainless steel construction and has a built-in large rotor head – It is equipped with microcomputer control for memorizing about 80 user programs – Productivity: 3000 kg. / hour – Pressure: 55 bar – Power: 5.5 kW
The machine is designed for portioning and dosing. Completely stainless steel. New micro-process control with workflow setup. It has its own lifting device for 200 liters of strollers. Technical specifications: Funnel with a capacity of 300 liters Productivity: up to 10000 kg. / time Portioning speed: up to 500 g. in min. Portion weight from 5 to 100000 g. Power: 11 kW Weight: 1353 / 1638 kg . Machine dimensions : 97 / 90 / Height. 200 cm. Dimensions with lift - length: 170 cm., width 133 cm. Lifting turning height: 285 cm.
Thimonier THB9200 Vertical Form Fill & Seal Filling Machine (2021) 50-500ml berlingot (pillow-style triangular pouch) Liquids & viscous products (including corrosive detergents) Auction-ID: A1-48805-1
Output: 25000 U/h // Bottle Size: 2,5
Output: 10000 U/h // Bottle Size: 0,5
Used Sidel filling line for water, PET 36000 BPHTechnical Specifications & Performance DataThis used bottling line is a high-efficiency PET still-water production system engineered for industrial packaging and beverage production. Designed around a 0.55L format and the 30/25 PCO1881 neck finish, it delivers a nominal output of 36,000 bottles per hour. Major equipment includes a Sidel SBO20 blow molder with 20 cavities, a Sidel EUROPA WM filling monoblock configured with 60 filling valves and 15 capping heads, and a Krones Contiroll HS labeling machine for continuous high-speed labeling. The line is a robust second hand solution for producers aiming to scale PET water operations with proven reliability.Production speed: 36,000 bph (design format 0.55L)Primary format: 0.55L (550 ml) bottlesNeck finish: 30/25 PCO1881Containers: PET bottlesBlow molder: Sidel SBO20, 20 cavitiesFilling monoblo ...
Used Kombi complete water filling line 12000 BPHTechnical Specifications & Performance DataThis used Kombi bottling line is a complete PET water production system designed for efficient, reliable beverage production. With a nominal capacity of 12,000 bph, it suits medium-scale operations seeking second hand industrial packaging equipment. The line includes a blow molder by SMF, a filling unit by Kombi, an OPP labeling machine by NDS, and a shrink packaging system by Kirveli, integrated with conveyors for continuous flow.Production speed: 12,000 bphYear: 2014Product: WaterContainers: PET bottlesBottle formats: Compatible with 0.33L, 0.5L, 1.5L bottle formatsNeck finish: 2925Blow molding: SMFFilling: Kombi engineeringLabeling: NDS OPP labeling technologyShrink packaging: Kirveli shrink wrapperControl: Mitsubishi PLCAdvanced Automation & Control SystemsThe line is equipped with a Mitsubishi ...
Used filling line for water for PET containers 5L 800bph This used filling line for water for PET containers 5L 800bph provides a complete solution for processing 5-liter PET bottles, both round and square. Specijalka from Serbia manufactured the line in 2006. Although the owner disconnected it eight years ago, they confirm that it remains in proper condition. Furthermore, you can inspect the line in dry cycle mode. Technical specifications of the filling line The used filling line for water for PET containers 5L 800bph reaches a nominal output of 800 bottles per hour with 5.0-liter containers. Specifically, the system includes a 10-valve rinser, an 8-valve filler, and a 4-head capper, all integrated in a monoblock. Additionally, a cold-glue labeler applies paper labels. As a result, the setup handles rinsing, filling, capping, and labeling in a compact layout. PET bottle production unit ...
Used Filling Line Sidel For Water 2014 Air Compressor ABC 3HA-4-TFK-LT 200kw Air compressor Low Fusheng SA75 75KW Ice water Machine Nanjing Wuzhou LSBLG 1290DT 1256.8KW 298.8KW Ice water machine Shanghai Baoqing WA-78W/PT4EN-I 49kw Blow Molding Machine SIDEL/SBO20 Blower Capacity：36000P/H Power：406KW Spindle heads 262 pcs Manipulator 10pcs/each Blow moulding satation 20 pcs SIDEL Filling Machine Capacity： 36000P/H Power： 35KW Filling Valves 60pcs Capping heads 15 pcs SIDEL 36000 bph Labelling Machine Capacity： 600B/min Power： 50KW Vacuum drum 1 set Scaleplate 2 pcs Capping heads 20 pcs SMI Shrink Wrapper Capacity： 35 P/Min Power： 75KW Divider： 4 sets Infeed： 4 sets Former 5 sets TW Benifit Palletizer with Conveyor and Divider Capacity： 35 P/M Power： 25KW Used Filling Line Sidel For Water 2014, this complete line for water is in excellent conditions and ready immed ...
Complete filling line for disinfection fluids I have for sale a complete filling line for still fluids such as: disinfectants, chemical compounds, technical fluids or water. On this line 0,33 l – 6,0 l containers or bottels can be used. The line consists of: 1. Filter; 2. Container for fluids, volume ~800 l; 3. Pump; 4. Non automatic washer for used containers/bottles; 5. Gravity flow filler, with 8 separate filling nozzles; 6. Single cylinder Capper; 7. Labeller; 8. Collective table; „as it stands” EXW Kędzierzyn-Koźle Our Company offers conveyors – new and used. In case of further question please do not hesistate do call or mail us.
Barrel filling line complete (new Waagevon Bizerba, control panel and filler neck Bedieteil Bizerba iS30 Scales Bizerba type 2000/4000 VE-L 2250 piece barrel bag (new) with 3500 piece barrel bag sealers (new) NETZSCH with dosing unit BJ. 1983 with 80 piece barrels with lids and 80m EW pallets
GRONINGER LIQUID FILLING LINE FILLING AND CLOSING MACHINE DFVK 6000 - STOPPERING MACHINE KVK 108B Anno di costruzione: 2002 Output: 12,000 per hour (200 per min), based on 3ml vial, 1ml fill Filling range: 0,2 ml- 135 ml (equipped with according pumps) Diameter range: 14-35 mm Height: 30-100 mm PLC: Siemens PLC type S7 300 Guarding: Stainless steel frame with safety glass The vial filling and closing line is capable of running in the following ways: - Fill and half-stopper a batch for freeze-drying - Overseal a stoppered batch from after freeze drying process - Fill, stopper and overseal a liquid batch Line under ORABS - Open Restricted Access Barrier System. Full set of operation manuals and technical documentation. Various spare parts.
Can filling line capacity: 20.000 cph can size: 330 ml can type: 211 / 202 other can sizes and can types are possible consisting of: Can depalletizer system König type depal 2000 incl. pallet transport complete reconditioned and fixed for your 330 ml can Can rinser Hysek type Rinsstar 2000 to rins 330 ml cans with filtered water complete reconditioned and fixed for your 330 ml can Can filler and seamer Ortmann + Herbst Hansacan 30 blocked with Ferrum can seamer, can filler with 30 filling, blocked with 5head can seamer, filling temperature: 8-10°C, complete reconditioned and fixed for your 330 ml can Fill high control incl. pushing station Heuft - new machine Can warmer Hermis - new machine to heat up the cans from 8°C to 22° C stainless steel machine with 3 sections Tray erector, tray packer incl. foil shrinking machine Giemme T ...
SYNTEGON CARTRIDGE FILLING LINE Year of construction: 2023 Complete line, never installed. Composed of Washing Machine Type RRU 2053 C Before the cartridges can be safely filled and closed, they need to undergo a thorough external cleaning to remove product residues and other contaminants, preventing harmful substances from compromising operator and patient safety. The designed solutions allow to externally clean a wide variety of containers, with special emphasis on fast and easy operations. PRODUCTION CHARACTERISTICS Range containers: max. 10 ml Output/h: up to 21,600 Hot Air Laminar Flow Tunnel Type HQL 3320 This tunnel, highly flexible and cost-effective thanks to their modular set-up and high level of automation, uses dry heat to sterilize a wide range of containers safely and reliably, including pre-cleaned ampoules, cartridges, and syringes using ...
Filling line for stand-up pouches - LINAPACK Year of construction: 2018 Bag types: Stand-up pouches of all types Shape cut Euro hole Spout and cap 45° One format set is required per bag format Format set for 250ml stand-up pouches with Euro hole available. Filling process: Hot filling at 71 - 85°C Filling goods: previous filling goods - were various cocktail drinks Output: approx. 50 bags / min depending on the product - 750-900 liters/h 1. Buffer tank Equipped with agitator, flow meter (E+H), level indicator, cleaning ball, pouring basin. The buffer tank is fully automatically connected to the pasteurizer and its control system. Volume: approx. 1,000 liters 2. Pasteurization unit PAS-900 For the gentle heating of RTD beverages or similar products. With a capacity of 750-1.000 liters per hour. Previous energy source: steam The pasteurizer work ...
Filing Line for non-returnable PET-bottles make KRONES, Kaeser, Comag, Lachenmeier capacity 14.000 bottles/h at 0,5l bottle 12.000 bottles/h at 1,5l bottle neck finish PCO 1810 filling product carbonated water, beer and soft drinks with 15°C and 8,0 g/l CO2 year 2004 packing 3 x 2 (with and without handle) pallet 4 x ¼ Plastic pallet (600 x 400 mm) 2 x half-size pallet (800 x 600 mm) on Euro pallet (1.200 x 800 mm) control Uni Siemens S7 300 kind of current TN-S-net, 400 V, 50 Hz This complete filling line for non-returnable PET bottles was manufactured in 2004 by Krones. The line is for production of high-performance beverages and it is in good condition. consisting of: 1. Blowmoulder-Filler-Bloc KRONES Contiform S08 Incl. preformtipper Tanner, Prefromconveyor Cooling Unit KKT Kraus KLC50N Mecafill VKP-PET 2880-80-113 Neckhandling Automatic butterfly ...
PET filling line Krones capacity: 16.000 bph by 1.500 ml product: still and carbonated water bottle sizes: 500 ml / 1.000 ml / 1.500 ml label: 3 labels and wrap around label OPP packaging: 3 x 2 year of manufacturing: 2012 consisting of: Blowing machine Krones Contiform 8 including preform feeding Filling and capping bloc Krones Modulfill CIP system Varioclean AUT-5000L Inspection machine Krones Checkmat 731FM-X Bottle dryer Linardry S1M Labelling machine Krones Topmatic to label 3 labels and wrap around label OPP Packer Variopac to pack 3 x 2 = 6 pack Handle applicator Palletizer Modulpal for pallets 800 x 1.200 mm and 1.000 x 1.200 mm Stretch wrapping machine Robopack Sleeve labelling machine Krones Bottle conveyors, cap conveyor, pallet conveyors
PET Aseptic filling line Sidel There are 2 capacities: 18.000 ltr./h and 27.000 ltr. / h - depending on the bottle sizes Capacity: 36.000 bph by 0,5 ltr. and 0,4 ltr. 18.000 bph by 1,5 ltr. Year of manufacturing: 2006 - 2025 Aseptic line produces aseptic products and has been operating since 2006. All maintenance activities have been done twice / year according to OEM specification and with original OEM parts by OEM service technicians. The line includes processing area (mixer, pasteurizer and aseptic tank) APA platform (solution for sterilizing the PET bottles and caps), filler, CIP modules for processing and filler, 4 cameras full bottles inspector (360 degrees), accumulation table, labeling machines (roll on and sleever) packer, palletizer and stretch wrapper. OEM for the sensitive part of the line is Sidel and for processing – Tetra Pak. Over the years, all main elect ...
LINE FOR FILLING EDIBLE OIL IN 1,0 LTR. PET BOTTLES Capacity: 6,000 hph x 1.0 L conisting of: Blower KOSME KSB 3000 – 2001. – 2 pcs x 3,900 fph Box for preforms with transport to the blower Compressor for cooling moulds MTA S.R.L. - 2000 KOSME bottle air conveyor – 1999 AISI 304 stainless steel Electrical control cabinet with PLC Built-in air filters It transports bottles from blower to filler Filler and capper – ICS-Slovenia - 1995 – 6,000 L/h Labeller ICS – 1995 – paper labels, cold glue Conveyor belts ICS – 1995 Packer in transport boxes 3x5 bottles – ICS – 1995 Shrink wrapper SMIPACK-packer in foil 2x5 bottles – 2013 Pallet wrapper ZLATOROG-Slovenia – 1999 KAESER low and high pressure compressors – 2000 Refrigeration dryer There are spare parts worth approx. 30.000.- EUR It has complete technical documentation Required space for eq ...
Sidel PET filling ling products: drinks with Co², beer capacity: 12.000 bph per 1,5 ltr. It is possible to turn on individual machines of the line in a dry state. bottle formats: 500 ml 700 ml, 1.500 ml all neck bottle formats: PCO 28 - 1810 1. Blow molding machine Sidel SBO 10 year of manufacturing: 1999 2. Cooler for SBO 10 year of manufacturing: 1998 3. Preform hopper Sameto Technifil Year of manufacturing: 1999 4. Preform conveyor Sidel year of manufacturing: 1998 5. Compressor SIAD year of manufacturing: 1999 and cooling for the compressor 6. Air conveyor RAFALE year of manufacturing: 12/1998 7. Mixer 240 C, Moravek 'CFT year of manufacturing: 2000 8. Tribloc Alsim PET r.v. for 60 filling taps year of manufacturing: 2000 9. Labelling machine Krones Contiroll year of manufacturing: 2004 10. Slat conveyors year ...
used
Filling line for cans fixed for 330 and 500 ml cans capacity: 6,000 cans/hour for 330 ml cans packaging: 3x4 or 4x6 cans on tray shrinked into foil consisting of: 1. TMG Impianti depalletizer 2. Comac carbonator, year of manufacture: 2007 3. MCD filling and seaming combination, type: 16/4 also manufactured by Comac, year of manufacture: 2007 4. Comac tunnel pasteurizer, year of manufacture: 2007 5. Dimac Star One tray erector, tray packer, and foil wrapping machine The filling line is currently fully assembled and in excellent condition. It is being sold with the associated control equipment and conveyor belts. It can be inspected on request.
Complete BOSCH line for sterile ampoules filling under isolator Production: 400 ampoules per minute working range • Diameter : From 9 up to 30 mm • Height : From 60 up to 160 mm • Formats incluided :1 - 2ml The machine comes with ISOLATOR and DEDICATE AHU AND CIP/ SIP IPC (weigh control ampoules)
Complete PET Bottle Filling Line for Carbonated Soft Drinks manufacturer: SIPA / PROCOMAC year of Manufacturing: 2009 location: Germany availability: Beginning October 2026 The line is currently in operation and can be inspected during production. Technical Details: capacity: approx. 12,500 bottles per hour bottle sizes: 500 ml, 750 ml, 1,500 ml neck finish: PCO 28 / 1881 750 ml additionally with sport cap (PCO 1881) consisting of: 1. Blowing machine SIPA SFR 8 with 8 cavities incl. preform feeding system incl. chiller but without preform unloading device and without high pressure compressor 2. Air conveyor GEA Procomac 3. Tribloc GEA Procomac 50 / 70 / 12 with 50 rinsing stations, 70 filling valves and 12head plastic screw capper incl. complete clain room around the machine type ISO 5”, incl. two sorting units, incl. bottle drying station after the fi ...
System for filling 10 liter PET canisters. The canisters are filled onto two platform scales. Automatic fine weighing and shutdown. Compressed air operated
Filling, weighing and packaging line: Composed of: "Ishida" multihead weigher Type CCW-M-216W-D/30-SS Heads: 16 pieces Output: up to 2 x 40 weighings/min Filling weight (max. weight): 1,500 g Accuracy: Average 0 to +1.0 g Weighing circumference: 14-1000 g Max. volume: 4,500 cc (per individual weighing) Minimum division: 0.2 g Display: Toch-screen display Power: 230V, 50Hz Connected load: 1.7 kVA In good condition + Vertical Flowpack Machine "Rovema" Type VPK260 - 14110 YOC 2001 Power (mech.) Cycles/min: 180 Roll width / diameter (max.) (mm): 450/ 550 (600 / 550 with pre-roll) Bag width (min. – max.) (mm): 60-260 Bag length (min. – max.) (mm): 120-600 Filling volume (max.) (cm³): 6000 Sealing Pressure (Max) (N): 5000 (Optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: (L x W x H) (mm): 2,200 x 1,430 x 1,620 mm Weight: 920 kg Mains ...
Can filler and seamer Markl / Bonicom Filler: Markl Bavaria 16L with 16 filling valves Seamer: Bonicom F 120 with 2 seaming heads Capacity: approx. 5.000 cph Can size: 330 ml and 500 ml standard cans Can type: 211 / 202 good condition
Filling and packaging lines for sausage products (or plant-based alternatives) in cans, consisting of:, 2 filling lines, Line 1: set up for 125 g - aluminum cans with a can diameter of 73 mm, Line output: approx. 150 cans / min., Line 2: set up for 200g/300g and 400g cans with a can diameter of 99mm., Output: approx. 70 cans / min., Sterilization:, The products were sterilized in full water autoclaves with rotation (5 available) that were overhauled by Trinitas Trading in 2017., 3 labeling and packaging lines:, The labeling and packaging line for 125 g cans consists of a Langguth hot melt labeling machine from 2016 and a virtually unused Wächter packaging system (leased system) from 2022., We will be happy to send you the complete list of all machines belonging to the lines upon request., The machines can also be purchased individually.
A fully automatic high-vacuum rotary filling and capping machine Alwid for spirits is available. Filling stations: 48, filling valve diameter: 14mm, capper type: Alwid Favorit-PP, capping heads: 10, closure types: PP28/PP28x44/PP31.5 deep, min. working height: 1150mm, bottle volume: 0.7l, bottle types: rectangular glass bottles/vodka bottles/long-neck bottles, filling capacity according to documentation: 18000bph, effective filling capacity: approx. 12000bph, weight: approx. 6500kg, operating hours: approx. 14000h. Without sorting unit and chutes. The vacuum pump probably needs descaling. The deviation between the documented and actual filling capacity per hour is due to foam formation during the filling process, which significantly reduces performance. Documentation available. An on-site inspection is possible.
Output: 15000 U/h // Bottle Size: 1500 ML
Output: 9000 U/h // Bottle Size: 5ml-2l
Filling line for cream Manufacturer: Kugler Type K 54 R Masch.-Nr. 12943 Composed of: 1x rotary table 1x Kugler filling machine, type K 54 R single-digit, built in 1983 with transport pin belt and sealing device Hopper for lids including feed and support, currently designed for filling into cans Lid Screwdriver Inkjet printer EBS 6000 Straffbanderolierer, Fabr. Pest Pewo Pack Type 450 SN including shrink tunnel Film width 30-450 mm Film thickness 0.02-0.1 mm Roll diameter max. 300 mm Film type: PE
Line for filling delicatessen products into plastic - trays, consisting of:, Vessel filling system, brand Waldner, type 12.3, year 2011, 2-track (two different formats) – however, only single-track operation is possible., Format section 1: Round cup diameter 100mm (including edge) height 80mm and 60 mm, Format row 2: rectangular cup 185mm long 135 mm wide (incl. edge) 35mm deep, The shells are sealed with film from the roll, Roll magazine about 500mm long, 400mm wide, Space requirement Waldner: approx.: 2,100 m 2,100 mm, Discharge belt of Waldner: approx 1,800 mm, Dosing of liquid and free-flowing components:, The plant has two filling heads, which are filled via piping directly from the boiler., The pipe system can be fully purged., The toad line and Maso – Sinus Pump, type SPS 3, are included in the scope of delivery., Feeding of the multi-head weigher using two belt conveyors:, S ...
Offered is an incomplete returnable glass filling and packaging line consisting of the following machines and units: Unloader: Kettner, crate washer: Bohrer, insert screens, 1x zone, 2 inverters, unpacker: Kettner Blitzpac A35 T1 year 2002, unscrewer: Adelski, cleaning machine: Krones Einend KESK year 1994, approx. 19.303h, EBI inspection machine: Heuft Spectrum Inline IR year approx. 2015, filler: Cobert, 60 filling stations, approx. 15,000 bottles/h at 1.0l, 1 pc. SV 10-digit, 2 pcs. KK 10-digit, twist-off capper: SWC year 2008, cooler: NIKO 091 26-110-100 year 2015, temperature control: approx. 85°C - 30°C, labelling machine: Krones Prontomatic K090-A43, body, front and back labelling, dating: Markem Image, loader: Kettner Bojok, Born Binder. Processable containers/formats: bottles 0.2l/30-case, 0.25l (RW), 0.5l/24-case, 0.7l juice bottle, 0.75l (EW), 1l VdF/6-case/12-case, crates/f ...
IWK TFS80-1/TZ204 tube filling line for processing tubes made of aluminium, PE, PP, PVC, PE laminate and aluminium laminate consisting of IWK TFS80-1 tube filling and closing machine for possible tube diameters 11 to 60.0 mm, total tube length from 60.0 to 285.0 mm, tube shell length (cylindrical length) from 50 to 250 mm, filling volume with corresponding dosing pumps from 1.0 to 400.0 ml, 26 tube holders, tube holder pitch 110.0 mm, tube orientation, pre- and post-gassing with nitrogen, double folding of aluminium tubes and hot air sealing for plastic tubes, Domino D Series CO2 laser coder for marking the tube fold with the variable data with DPX 1000 laser extraction system, electrical connection 3x400V/50Hz/3Ph, power 16.0 kW, machine net weight approx. 2400 kg, machine output up to 100 tubes/min., including IWK TZ 204 fully automatic tube feeder for cylindrical tubes, possible tube ...
Used KHS bottle filling line with crown capper - overhauled by HORMES - Filling rotary - Bottle cap bunker - Feeding of the crown caps by magnetic tapes - Conveyor belts The plant has been completely overhauled by HORMES and is currently out of operation. Viewing possible. We will be happy to send you further information on request.
maximum number of results exceeded
please refine your search
8.000 € 
