water chiller used for sale

Used 903Kw POWER-CIAT LXH.M 3750 HPS aircooled chiller with integrated hydraulic module. Complete with 3x Bitzer CSH8561-125Y-40P hermetic screw compressor with economizers. Direct expansion shell and tube evaporator with a water capacity of 219 ltr. Aircooled condenser with 12 fans diameter 800 mm and airflow of 264.000 m3/h. Electric control with microprocessor Xtra connect. Capacity control from 17 to 100%. Hydraulic module with buffer tank 950 ltr, expansion vessel 80 ltr and twin centrifugal pump. Specifications: Our inventory stock No. 12831 Brand CIAT Type LXH.M 3750 HPS Product type Air Cooled Chiller Capacity kW 903 Capacity Tons 256,8 Refrigerant Freon Refrigerant Type R 407C Liquid buffer tank Pump Hydronic Module Weight in kg. 8.576 kg Sizes 9400x2500x2200 mm (LxWxH) Compressor(s) type & model 3x Bitzer CSH8561-125Y-40P Display Ciat xtraconnect cont ...

-

Make: HIROSS Type: SLO920D02200X Power: 95 kW refrigerant: R407C 2 pcs. compressor Maneurop Compressor type: SZ175S4RA Price on request

Carrier 19XR7070LF475, Centrifugal Chiller Year 2009, 300 h run hours , 3100KW/1000ton cooling capacity, turbo compressor, Siemens soft starter, R134a, high efficient machine, 400V 50 Hz, Commissioning and service, for sell, for rent, for contracting, world-wide, ready for shipping

Cold water kit, Chiller make AIREDALE, 450 KW, Y.O.M. 2004, Freon R 407C. More pictures and information on info@frigocom.at or on 0436641838175.

Continuous tunnel

Used belt chiller for vegetables CABINPLANT”. Worked on peas. Overall dimensions: - Total length - 6.550 mm; - Total width - 2,320 mm; - Total height - 2,300 mm. Technical data: Auger that distributes product evenly on the belt: - Working length of the belt - 6,200 mm; - Working width of the belt - 1,850 mm; 6 product cooling spray sections; 6 pumps feeding the cooling section - each pump - 0.55 kW motor - 1,395 U/min. Circulation pump - 0.55 kW - 1,395 U/min Modular-polyethylene belt: - Belt length - 5,250 mm; - Belt width - 465 mm; Belt drive - speed transmission - motor - 0.37 kW - 1,235 U/min; Shorts tank; The machine additionally equipped with a CIP washing and rinsing system. All made of stainless steel.

chiller, chiller Emicon RAS 801 S KP YOC 2018 80 Kw cooling capacity 22.8 Kw. Electrical Power, Amp. 62 Refrigerant R290 Weight 1.106 kg.

Chiller 120KW Model ICS Unit: 1 off Aptus ATXA 046 G SE SN R454B LOW GWP refrigerant Air Cooled Chiller Design Criteria - A: 120kW at 6°C / 12°C / 35°C with Run / Standby HH Pumps & Buffer Tank Thermal duty - cooling 120kW Fluid type Water/Glycol Fluid supply temperature 6°C Fluid return temperature 12°C Site External Year 2022

5 PCS AVAILABLE BRAND FRIGEL MANUFACTURED 2007 CONDITION USED - IN WORKING ORDER QUANTITY AVAILABLE 5 UNITS MODEL RCD180/24 (180 LTS PER HOUR) TEMPERATURE RANGE 23 TO 194 F (CELCIUS -5 TO 90) VOLTAGE 400 VOLTS FREQUENCY 50HZ SHIPPIING WEIGHT 395.00 Kgs MAX CURRENT 52 AMP FLUID H20 MAX PRESSURE 8 BAR REFRIGERANT R407C HIGH PRESSURE 27 BAR LOW PRESSURE 22 BAR abc.FRIGEL.IT

Chiller Green Box Multi 156A 2006 year probably damaged evaporator // controller - o.k. // three compressors - o.k. // one compressor probably dameged Weight - 4000 kg

Chiller Green Box Twin 61 2006 year Price 4.500 Euro probably damaged evaporator // controller - o.k. // two compressor - o.k.

Chiller made by Linde Self-made for low temperatures, goes down to minus -25 °C, with two refrigeration circuits. With two Bitzer 6G-30.2Y compressors as main compressor and two 2N-7.2Y compressors as subcoolers. Bundle tube heat exchangers, condensers, etc. Compressors have been renewed.

General SKU204U930 LocationBarneveld MakeSingle TypeChill Advanced C-6-W Mach.No.152170 Pressure Working pressure17 Bar Main Features Heating (medium)Electric Capacity6 KW Temp.30 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck With coolingcheck Capacity6 kW Temperature-5/+30°C With pumpcheck 3,1m³/h (2x) With temperature controllercheck With controlcheck Information Year of construction2015 Mounted on wheelscheck With switchcheck CEcheck Floorspace1,30x0,65 m Total height1,70 m Weight300 kg Extra SpecificationsPower 11.7 kVA, 16,3A, test pressure 21 bar, refrigerant medium R134a, volume 4,0 kg Temperature control unitsSingle TemperiertechnikHeat exchangers > Temperature control unitsBrand > Single Temperiertechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price com ...

General SKU207S950 LocationBarneveld MakeJulabo TypeFC-1200S Pressure Working pressure1.2 Bar Main Features Heating (medium)Electric Capacity1.2 KW Temp.80 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Electric heatingcheck Heating capacity-15/80 °C Electric capacity1,2 kW With coolingcheck Capacity0,26 - 1,2 kW (Ethanol) Temperature-10/20 °C (Ethanol) Tank capacity8 - 11 Ltr. With pumpcheck (Immersion Pump) Capacity22 Ltr./min Information Mach.No.10071327 Floorspace0,5x0,6 m CEcheck Total height0,5 m Weight70 kgTemperature control unitsJulaboHeat exchangers > Temperature control unitsBrand > Julabo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnevel ...

General SKU207S949 LocationBarneveld MakeJulabo TypeFC-1200S Pressure Working pressure1.2 Bar Main Features Heating (medium)Electric Capacity1.2 KW Temp.80 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Electric heatingcheck Heating capacity-15/80 °C Electric capacity1,2 kW With coolingcheck Capacity0,26 - 1,2 kW (Ethanol) Temperature-10/20 °C (Ethanol) Tank capacity8 - 11 Ltr. With pumpcheck (Immersion Pump) Capacity22 Ltr./min Information Mach.No.10070753 Floorspace0,5x0,6 m CEcheck Total height0,5 m Weight70 kgTemperature control unitsJulaboHeat exchangers > Temperature control unitsBrand > Julabo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnevel ...

General SKU207S028 LocationBarneveld MakeJulabo TypeFC-1600T Pressure Working pressure18 Bar Main Features Heating (medium)Electric Capacity1.2 KW Temp.80 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Electric heatingcheck Heating capacity-15/80 °C Electric capacity1,2 kW With coolingcheck Capacity0,25 - 1,45 kW (Ethanol) Temperature-10/20 °C (Ethanol) Tank capacity8-11 Ltr. With pumpcheck (Immersion Pump) Capacity28 Ltr./min Information Mach.No.10255538 Floorspace0,5x0,6 m CEcheck Total height0,5 m Weight70 kgTemperature control unitsJulaboHeat exchangers > Temperature control unitsBrand > Julabo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, ...

General SKU207S030 LocationBarneveld MakeJulabo TypeFC-1600T Pressure Working pressure18 Bar Main Features Heating (medium)Electric Capacity1.2 KW Temp.80 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Electric heatingcheck Heating capacity-15/80 °C Electric capacity1,2 kW With coolingcheck Capacity0,25 - 1,45 kW (Ethanol) Temperature-10/20 °C (Ethanol) Tank capacity8-11 Ltr. With pumpcheck (Immersion Pump) Capacity28 Ltr./min Information Mach.No.10148820 Floorspace0,5x0,6 m Total height0,5 m Weight70 kgTemperature control unitsJulaboHeat exchangers > Temperature control unitsBrand > Julabo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Neth ...

General SKU207S033 LocationBarneveld MakeJulabo TypeFC-1600T Pressure Working pressure18 Bar Main Features Heating (medium)Electric Capacity1.2 KW Temp.80 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Electric heatingcheck Heating capacity-15/80 °C Electric capacity1,2 kW With coolingcheck Capacity0,25 - 1,45 kW (Ethanol) Temperature-10/20 °C (Ethanol) Tank capacity8-11 Ltr. With pumpcheck (Immersion Pump) Capacity28 Ltr./min Information Floorspace0,5x0,6 m Total height0,5 m CEcheck Weight70 kgTemperature control unitsJulaboHeat exchangers > Temperature control unitsBrand > Julabo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands.  ...

General SKU207S034 LocationBarneveld MakeJulabo TypeFC-1600T Pressure Working pressure18 Bar Main Features Heating (medium)Electric Capacity1.2 KW Temp.80 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Electric heatingcheck Heating capacity-15/80 °C Electric capacity1,2 kW With coolingcheck Capacity0,25 - 1,45 kW (Ethanol) Temperature-10/20 °C (Ethanol) Tank capacity8-11 Ltr. With pumpcheck (Immersion Pump) Capacity28 Ltr./min Information Mach.No.10148819 Floorspace0,5x0,6 m CEcheck Total height0,5 m Weight70 kgTemperature control unitsJulaboHeat exchangers > Temperature control unitsBrand > Julabo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, ...

General SKU207S029 LocationBarneveld MakeJulabo TypeFC-1600T Pressure Working pressure18 Bar Main Features Heating (medium)Electric Capacity1.2 KW Temp.80 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Electric heatingcheck Heating capacity-15/80 °C Electric capacity1,2 kW With coolingcheck Capacity0,25 - 1,45 kW (Ethanol) Temperature-10/20 °C (Ethanol) Tank capacity8-11 Ltr. With pumpcheck (Immersion Pump) Capacity28 Ltr./min Information Mach.No.10255538 Floorspace0,5x0,6 m CEcheck Total height0,5 m Weight70 kgTemperature control unitsJulaboHeat exchangers > Temperature control unitsBrand > Julabo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, ...

General SKU207S024 LocationBarneveld MakeJulabo TypeFC-1600T Pressure Working pressure18 Bar Main Features Heating (medium)Electric Capacity1.2 KW Temp.80 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Electric heatingcheck Heating capacity-15/80 °C Electric capacity1,2 kW With coolingcheck Capacity0,25 - 1,45 kW (Ethanol) Temperature-10/20 °C (Ethanol) Tank capacity8-11 Ltr. With pumpcheck (Immersion Pump) Capacity28 Ltr./min Information Mach.No.10148818 Floorspace0,5x0,6 m CEcheck Total height0,5 m Weight70 kgTemperature control unitsJulaboHeat exchangers > Temperature control unitsBrand > Julabo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, ...

YORK chiller type YLCC-H 102V In good condition Cooling capacity : 96,1 KW Nominal power :19,1 KW (x2) Power : 400 V - 3,5 Hz R407C Weight. : 1 133 kg

General SKU293X399 MakeLauda TypeT2200 W Mach.No.LWP104-13-0007 Year of construction2022 Main Features Heating (medium)Electric Capacity3.1 KW Temp.120 °C Specified Features - Temperature control unit Temperating machinecheck Water heatercheck With coolingcheck Temperature-25°C/120°C Tank capacity7 l. With pumpcheck Motor3,1 kW, 230 volt With temperature controllercheck Information LocationBarneveld Mounted on wheelscheck With switchgearcheck Floorspace0,45x0,70 m Total height0,80 m CEcheck Extra SpecificationsCool medium R404ATemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Ba ...

General SKU204U932 LocationBarneveld CEcheck MakeSingle Pressure Working pressure17 Bar Main Features Heating (medium)Electric Capacity6 KW Temp.30 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck With coolingcheck Capacity6 kW Temperature-5/+30°C With pumpcheck 3,1m³/h (2x) With temperature controllercheck With controlcheck Information TypeChill Advanced C-6-W Mach.No.152171 Year of construction2015 Mounted on wheelscheck With switchcheck Floorspace1,16x0,65 m Total height1,65 m Weight265 kg Extra SpecificationsPower 11.7 kVA, 16.3A, test pressure 21 bar, refrigerant medium R134a, volume 4.0 kg Temperature control unitsSingle TemperiertechnikHeat exchangers > Temperature control unitsBrand > Single Temperiertechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price com ...

Combined Cycle CHP Power Plant 12.5 MWe + 1.6 MW Chilled Water This combined cycle CHP plant consists of one Dual Fuel Solar Turbine Mars 100 with 40 bar steam boiler, Siemens SST 060 Back Pressure Steam Turbine and one Double Acting LS Absorption Chiller with electrical, mechanical and control auxiliaries. Plant is maintained according to manufacturer’s instruction. Gas turbine engine was changed to Solar refurbished unit in June 2023 and it has accumulated only about 16000 hours since that. Both the gas turbine and the steam turbine were last overhauled by OEM service in mid-2025 and thus equipment is in good operational condition. This combined cycle CHP (trigeneration) plant delivers 10 MWe of primary electrical output from a Solar Turbines Mars 100 dual-fuel gas turbine, with an additional 2.5 MWe from a Siemens SST 060 back-pressure steam turbine and 1.6 MWth of chilled w ...

General SKU331W744 LocationBarneveld CEcheck MakeGWK Pressure Working pressure19 Bar Main Features Heating (medium)Electric Capacity46 KW Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Heating medium:R404A (cooling) Electric capacity64 kW With coolingcheck Capacity46 kW Temperature-25°C Tank capacity800 With pumpcheck Capacity16 m³/h Motor4 kW, 400/230 volt With temperature controllercheck Information TypeKCL100/46AZ Mach.No.20 7515 04-01 Year of construction2005 With switchcheck Floorspace3,80 x 1,75 m Total height2,35 m Weight2000 kgTemperature control unitsGWKHeat exchangers > Temperature control unitsBrand > GWK What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machi ...

General SKU207S031 LocationBarneveld MakeJulabo Pressure Working pressure18 Bar Main Features Heating (medium)Electric Capacity1.2 KW Temp.80 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Electric heatingcheck Heating capacity-15/80 °C Electric capacity1,2 kW With coolingcheck Capacity0,25 - 1,45 kW (Ethanol) Temperature-10/20 °C (Ethanol) Tank capacity8-11 Ltr. With pumpcheck (Immersion Pump) Capacity28 Ltr./min Information TypeFC-1600T Mach.No.10255538 Floorspace0,5x0,6 m Total height0,5 m Weight70 kgTemperature control unitsJulaboHeat exchangers > Temperature control unitsBrand > Julabo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Neth ...

General SKU207S948 LocationBarneveld CEcheck Pressure Working pressure1.2 Bar Main Features Heating (medium)Electric Capacity1.2 KW Temp.80 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Electric heatingcheck Heating capacity-15/80 °C Electric capacity1,2 kW With coolingcheck Capacity0,26 - 1,2 kW (Ethanol) Temperature-10/20 °C (Ethanol) Tank capacity8 - 11 Ltr. With pumpcheck (Immersion Pump) Capacity22 Ltr./min Information MakeJulabo TypeFC-1200S Mach.No.10070753 Floorspace0,5x0,6 m Total height0,5 m Weight70 kgTemperature control unitsJulaboHeat exchangers > Temperature control unitsBrand > Julabo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnevel ...

The Godwin Dri-Prime CD103M pump is an extremely powerful yet compact pump with a flow rate of up to 230m3 per hour litres. lift heights of up to 52 metres., The CD103M is equipped with the unique Godwin high-pressure oil, bath mechanical seal. This allows the pump, run dry for longer periods while it automatically, refill. The CD103M is capable of operating under the harshest conditions., CD103M handles solids up to 75 mm in diameter. This, This makes it a highly effective pump, suitable for both, slurry and clean water applications. The powerful CD103M, has proven itself as the pump of choice for contractors, local, governments, industrial and environmental companies., , Throughput capacity: 232 m3/h, Max dirt passage: 75 mm, Motor brand: PERKINS 404D-22T 36.4 KW @ 2500RPM, Max. head: 52 MWK, , = More information =, , Year of manufacture: 2017, Empty weight: 1.500 kg, Connector size: 4 ...

The machine (built 1999) comes with a table of 3 x 4m, can work with up to four cutting heads and is fully functional. The scope of supply includes an automatic sludge extraction system, sand storage tank incl. pressure vessel and an Ingersoll high-pressure pump. 2x head system. Can also run with 4x heads 1x pump included. has always been serviced. Is ready to use. Great working condition. Find more here - / Contact us at -

ECKERT Opal WaterJet COMBO waterjet cutting machine was built in 2011 in Poland by ECKERT AS Sp. z o.o. The machine, designed for precision machining of workpieces with a maximum thickness of 250 mm, combines all the benefits of plasma and waterjet cutting. The machining process is performed on a robust, large work table by means of a powerful cutting head. All table travel components are protected by bellows guards to ensure uninterrupted operation for many years of use. The design made of high-quality closed steel profiles, in turn, guarantees the highest stability during even the most demanding challenges. The ECKERT Opal COMBO WaterJet is offered with, among others, CAD/CAM software and a 37 kW high-pressure pump. Technical specifications of the ECKERT Opal WaterJet COMBO water cutting machine - maximum workpiece thickness (water machining): 250 mm - feed rate: 25000 mm/min - w ...

1 cooling water supply system for refrigeration production systems such as cooling tower or evaporative condenser systems with s standing round tanks with a capacity of 10,000 l each, stand on 4 feet per tank Insulated piping, equipped with manual valve flaps with 2 x 4 centrifugal pumps stations standing on 1 frame each, controlled by frequency converter Manufacturer Bauer, Mildenberg, project no. 3708-1 and - 2 Tanks were subsequently insulated with 1 control cabinet system

Cutting heads: 2, cutting head type: AWJ 2D, abrasive feed: system SM4000, pump type: KMT Streamline SL-VI Standard, max. pump pressure: 3800bar. Table dimensions X/Y: 3200mm/1710mm, cutting dimensions X/Y: 3010mm/1510mm, travel range X/Y/Z: 3010mm/1510mm/250mm, travel speed: 12m/min, cutting head distance range: 90mm-450mm, positioning accuracy: +/-0.075mm, repeatability: +/-0.035mm, control: Fanuc 0i-MF, operating hours: 4866h. Includes oil cooler, water treatment, and safety zone. Documentation available. On-site inspection possible.

Godwin HL80M high-pressure pump, , This dry self-priming high-pressure diesel engine pump is ready to tackle all the heavy work without complaining. With its robust 75 kW Deutz diesel engine (at 2200 rpm), it delivers impressive performance: a maximum capacity of 95 m³/hour and a delivery head of up to 85 meters. Whether its pressure testing pipes, irrigation, or a rinsing job after a fun weekend in the mud, this HL80M can handle it all., , Key specs:, , Type: HL80M, Drive: Deutz diesel engine, Fuel tank: 250 liters (you can keep pumping for a while before it gets thirsty), Consumption: ± 20 liters/hour at full load, Pressure connection: 4 flange, Suction connection: 4 V-piece quick coupling, Weight: 1,800 kg (solid, because quality weighs something), Dimensions: 2150 x 1130 x 2060 mm, Pump housing: cast iron – extremely strong, Impeller: cast steel – for when things get serious, M ...

Caffini libellula This Caffini water pump with 400 V electric motor is often used in construction industry, municipalities, civil engineering. The Caffini libellula diaphragm pumps have always been highly appreciated by their users in the construction and public works sector. The ability to run dry allows the operator to keep the ditch dry, even when it contains mud and suspended solids., Max yield : 20 m³/h, Max head : 16 mWK, , Available with any connection you require, , Throughput capacity: 20 m3/h, Max. head: 16 MWK, Weight: 100 kg, , = More information =, , Year of manufacture: 2025, Applicable material: Water, Empty weight: 100 kg, Cargo space capacity: 335 l, Technical condition: very good, Visual appearance: very good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = D ...

This Waterjet Italy WL510 was manufactured in 2022. Its a waterjet cutting machine designed for precision in cutting a wide range of materials. Ideal for industries requiring detailed and accurate cutting work. Contact us for more information.

ECKERT Opal WaterJet CNC waterjet cutting machine was built in 2019 in Poland by ECKERT AS Sp. z o.o. The machine is designed for precision machining of a wide range of materials, i.e. metal, stone, wood and plastics. Workpieces with a maximum thickness of 150 mm are machined by means of a reliable cutting head with anti-collision and tool height sensor. During cutting, only water is used, making the process free of harmful fumes and safe for the environment. The ECKERT Opal WaterJet is distinguished by its robust water table with a double WEMA grating system. The design made of closed steel profiles ensures high stability during even the most intensive challenges. All travel components, in turn, are protected by bellows covers. This solution guarantees uninterrupted operation of the machine for many years of use. The ECKERT WaterJet is operated via a state-of-the-art industrial co ...

This 3-axis Waterjet Italy CLASSICA CL 510 was manufactured in 2011, featuring a cutting area with dimensions of 3400 mm by 1800 mm and a Z-axis height of 200 mm. It includes a high-pressure KMT SL-V pump and an ESA S510 controller. If you are looking to get high-quality cutting capabilities, consider the Waterjet Italy CLASSICA CL 510 machine we have for sale. Contact us for more information about this machine.

flow meter (portable, in casing) with quick couplings 4 Cardan female (cup/lever) and male (ball) inpeller outside waterflow. With test sticker and certificat, EPA marked, , Field of application: Construction, Applicable material: Water, CE mark: yes, General condition: very good, Technical condition: very good, Visual appearance: very good, , = More information =, , Year of manufacture: 2025, Applicable material: Water, Technical condition: very good, Visual appearance: very good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just ...

Dont miss a drop with this impulse digital water meter, designed to accurately track your water discharge. Heres why its a must-have for your drainage installation:, Insight: With this digital water meter you have immediate insight into the amount of water you are pumping. No more guesswork, just accurate information., Easy Installation: No more hassle with complicated installations. Our digital water meter can be easily installed, so you can immediately benefit from the benefits., Dont wait any longer and choose our digital water meter today., Contact us for more information and find out how you can start measuring flow!, , = More information =, , Year of manufacture: 2024, Colour: Grey, Connector size: 4 Cardan, Quick coupler system: Yes, Technical condition: very good, Visual appearance: very good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerent ...

used Watermaster Classic suction excavator / dredger construction year: In 1993 working weight: approx. 19 metric tons transport length: 12.4 m transport height: 3.2 m transport width without side pontoons: 3.2 m pontoon frame height: 1.2 m spoon: 360 l shovel: 700 l

Treatment bath with cooling pipes. Belt discharge and drying blower

Qty. 1 Second-hand Sendzimir reversing cold rolling mill Mfc.: Waterbury Farrel Type: WZS- Reversing - Sendzimir Rolling Mill type: ZR – 23M – 31”, reversing Z”, 1 – 2 – 3 – 4 Built: 1977 Modernised in 1991 Capacity: approx. 50 000 T/annum Strip width: 370 – 740 mm Strip tension: controlled up to 10 Tons Thickness: Entry: 3.5 mm Exit: 0.20 mm Speed: 183 – 368 m/min. Min. exit thickness of material M70-A: 0.04 mm Last pass from 0.12 to 0.04 mm Qty. 1 Second-hand roll grinder Mfc.: Landis Type: L-28A Roll dia.: 40-100 mm Roll length: up to 1500 mm Qty. 15 Containers

Since we have focused our -fischer organics- laboratory service more on peptides / HRMS, we would like to hand over our SFC. The system has the complete equipment, The original price in 2012 was over 250,000 euros net! - Mass detector QDa - Backing pump RE6 - Acquity PDA detector - Acquity Pillar Manager - Acquity Binary Pump 1000bar - Acquity Autosampler - Isocratic UPLC pump - Convergence Manager

Waters Acquity UPLC-MS System, Used Acquity UPLC-MS System by Waters from 2009, used very little, with systematic proof of maintenance, from a large pharmaceutical company, with 6 months warranty and training and installation at the customer's site. . The system is sold with an additional set of spare parts in the form of an identical UPLC system (without MS). Each system can be viewed and tested in operation. The UPLC-MS system consists of the following parts: - SQD mass detector - Sample Organizer - Sample Manager - PDA detector - Binary Pump Manager - Column Manager Price complete system with additional modules as spare parts

1 of used glass bottling line for still and carbonated water Used for glass bottles 330 ml (D 61,3 x H 207,9 mm), 750 ml (D 78,0 x H 294,9 mm) and 1.000 ml (D 88,3 x H 318,7 mm) at speeds (limited by filler capacity) between 6.000 (1.000 ml) and 10.000 (330 ml) bph., mostly new 2000, plcs: Modicon, consisting of Ave Alta Meccaniche DBR50 bulk-bottle depalletizer, AVE 5.000 lph carbonator, AVE 24/24/6 rinser/filler/capper (28 mm ROPP), Kosme Unicol 720-9-2 dual-aggregate wet-glue labeler (new 2013!), Domino laser coder, Freemantle tray erector, Ave Alta Meccaniche type Inca 1T pick&place tray loader, (single-head machine, with heads for 12x 1000 ml, 12x 750 ml and 24x 330 ml), Dimac Starfilm LS film-only shrinkwrapper (overwrapping of trays), Ave Alta Meccaniche PABR 50/1 Palletizer. Some interconnecting conveyors.

Qty. 1 Second-hand steel strip production plant The plant consist of below lines: 20-High Sendzimir Mill Mfc.: Waterbury Farrel Built: 1960 Strip width: 330 – 660 mm Thickness Entry: 4.0 mm Exit: 0.076 mm 2-High Temper Pass Mill Mfc.: United Eng. & Foundry Co. Built: 1960 Strip width: 400 – 630 mm Thickness Entry: 1.6 mm Exit: 0.25 mm Tension Leveller Mfc.: TBA Built: 1982 Strip width: 500-1067 mm Thickness: 0.08-0.3 mm Tensile strength: 30-75 kg/mm² Bright Annealing Furnace Mfc.: Salem & Herr Equipment Built: 1960 Strip width: 150 – 610 mm Thickness: 0.254 – 2.7 mm

Well pump, centrifugal pump, water pump RED JACKET UMP i50S3-S diameter. Ø 120 mm motor: 1.2 kW 220 V

Still Water PET Bottling Line – 16,000 BPH (2018) Complete still water bottling line designed for high-efficiency production of small-format PET bottles with thermoseal lids. The line is suitable for filling 100 ml, 150 ml, and 200 ml PET bottles and includes blow molding, filling, sealing, labeling, packing, palletizing, and wrapping equipment. General Information - Application: Still / non-carbonated water - Bottle Material: PET bottles with thermoseal lid - Output Capacity: 16,000 bottles per hour - Bottle Sizes: 100 ml, 150 ml, 200 ml - Year of Manufacturing: 2018 Production Configuration - Combi Machines: 2 units (Blow Moulder + Filler + Sealer) - Machine Speed: 8,000 BPH each - Preform Type: Flat Neck – 6.39 g - Sealing System: Thermoseal neck Filling and Sealing Stations - Filling Station: Two-step system with two stations - Each station equipped with 8  ...