vr 6 used for sale

4 shaft shredder for crushing of thick-walled pipes. Supply via feeding shaft (not in scope of delivery, can be manufactured alternatively) Manufacturer Vecoplan Drive: Rotorshaft 1: 37 kW Rotorshaft 2-4: 30 kW (each)

Bosch VRM 6040 Lid Screwdriver Condition: very good (used) Description: Capper, Can Capper, Can Capper, Can Sealer The machine is high performance and has 4 heads. It can be driven up to 120 pieces per minute, but we drove it to 30 pieces per minute. Currently the machine is set to 400 ml cans from Obeck with (I think 89 mm lid), but the setting can also be changed. The machine has always been serviced and it works perfectly. Capacity: 120 cans per minute The machine is in perfect working order and can also be viewed on site. The only reason for the sale is to change the packaging of our product.

Subject to prior sale - errors possible! Internal reference number: D-1143-7

Evaporator Goedhart -Type: VRB 61507 -Cooling capacity: 14.5 kW -Fin spinning: 7 mm -Fans: 1 x 500 mm -Dimensions: 1460 x 800 x 770 mm -Stainless steel housing and block -Volume: 17 L -Weight: 120 kg -Quantity in stock: 1 -Reference number: CH 601 -Condition: Used in good condition, evaporator 100% tight, fans working, ready to work

Used cone mixer Vrieco Nauta mixer Type 100-RV-5 Material: Mild steel Max product weight 7,000kg Previously, gelatin was mixed with this mixer The mixer is in an uninspected condition. Revision work is also offered at the sale. See pictures

Material: stainless steel Year of manufacture: 1980 Content: 1000 ltr Weight: 350 kg Length x Width x Height: 3800 mm x 1900 mm x 1900 mm Drive shaft: 6,8 kW, snail 0,6W; Drive snail: 80 1/min. We develop, plan and build for you the whole plant exactly for your needs from new and/or used machines. More then 1000 used machines on stock. Write us below!

Technical data: maximum sheet width: 3000 mm maximum plate thickness at maximum yield of 240 N / mm² on bending: 35 mm On bending length: 2,2 x S Diameter of roller upper roller: 552 mm Bottom roll: 532,4 mm Side rolls: 400 mm

specifications: Max sheet width 3,000 mm Max sheet thickness at max yield strength 240 N/mm2 when bending to max. sheet width 35 mm when rounding Bend length 2.2 x S Max passage between rollers 145 mm Roller diameter upper roller 552 mm Underroller 532.4 mm Side rollers 400 mm Number of rollers 4 Powered rollers 2 top and bottom roller Drive of the rollers hydraulically Arrangement of the rollers symmetrically Rotation speed of the rollers 2-4 m/min Adjustable rollers 3 Type of adjustment of the rollers hydraulically Adjustment speed lower roller 0-200 mm/min. Side rollers 0-700 mm/min. Brake of the rollers pneumatic Actuation of the folding bearing hydraulically Operating voltage 3 x 380 V / 50 Hz Display device of the roll positions 4 x optical/analog Weight of the machine approx. 42 to Area 2.71 x 6.4 m Height 3.12 m

1 piece NAUTA mixer MBX 20s -Volume ca. 1.600 liters - bulk density CA. 0, 9 kg / l -Gearbox reconditioned vintage cameras -Swing-arm reconditioned vintage cameras -Container made of standard steel Virgin -Mixing screw steel Virgin -Spout pneumatically driven new product -Drive motors 4kW & 0.37 of kW Virgin

1 piece NAUTA mixer MBX 20-R -Volume ca. 1.600 liters - bulk density CA. 0, 9 kg / l -Gearbox reconditioned vintage cameras -Swing-arm reconditioned vintage cameras -Container made of stainless steel V2A new products -Mixing screw stainless steel V2A new products -Spout pneumatically driven new product -Drive motors 4kW & 0.37 of kW Virgin

1 piece NAUTA mixer MBX 40-R -Volume approx. 3.200 litre - bulk density CA. 0, 7 kg / l -Gearbox reconditioned vintage cameras -Swing arm mild steel Virgin -Container made of stainless steel V2A new products -Mixing screw stainless steel V2A new products -Spout pneumatically driven new product -Drive motors 5, 5kW & 0.55 of kW Virgin

1 piece NAUTA mixer MBX 50-R -Volume approx. 4.000 litre - bulk density CA. 0, 6 kg / l -Gearbox reconditioned vintage cameras -Swing arm mild steel Virgin -Container made of stainless steel V2A new products -Mixing screw stainless steel V2A new products -Spout pneumatically driven new product -Drive motors 5, 5kW & 0.55 of kW Virgin

High quality - Low price! Radial drill MAS VR5A Arm 1600mm Max dia in steel 50mm Max dia in cast iron 60mm Max threading in steel M30 Max threading in cast iron M42 MT 4 Spindelmotor 4 kW - 28 - 2500 RPM Distance table-spindle nose 1600 mm Clamiping area 1800 x 1000 Weight 3,7 Ton

Conical screw mixer works according to the proven principle of a rotating mixing screw, which is guided along the conical tank wall at a constant distance by means of an orbital alarm. The product flow is characterized by an intensive but gentle mixing of the individual particles. Suitable for demanding products in the pharmaceutical, chemical or food industries, it ensures a uniquely gentle mixing process. General data: Volume : 2000L Operating temp. : 20-25 °C Operating voltage : 380V Frequency : 50Hz Ingress protection : EExe II T,IP54 (200-300 °C ) atmosphere( protection against ingress of particles) Mixer auger: -Rpm. :58 -Diameter screw blades : 300mm -Pitch : 250mm -Thickness 3mm Swivel arm: -Power : 0.55kW -Rotation speed : 6m/min. -Voltage : 380V -Frequency : 50Hz

Conical screw mixer works according to the proven principle of a rotating mixing screw, which is guided along the conical tank wall at a constant distance by means of an orbital alarm. The product flow is characterized by an intensive but gentle mixing of the individual particles. Suitable for demanding products in the pharmaceutical, chemical or food industries, it ensures a uniquely gentle mixing process. General data: Volume : 2000L Operating temp. : 20-25 °C Operating voltage : 380V Frequency : 50Hz Ingress protection : EExe II T,IP54 (200-300 °C ) atmosphere( protection against ingress of particles) Mixer auger: -Rpm. :58 -Diameter screw blades : 300mm -Pitch : 250mm -Thickness 3mm Swivel arm: -Power : 0.55kW -Rotation speed : 6m/min. -Voltage : 380V -Frequency : 50Hz

Conical screw mixer works according to the proven principle of a rotating mixing screw, which is guided along the conical tank wall at a constant distance by means of an orbital alarm. The product flow is characterized by an intensive but gentle mixing of the individual particles. Suitable for demanding products in the pharmaceutical, chemical or food industries, it ensures a uniquely gentle mixing process. General data: Volume : 2000L Operating temp. : 20-25 °C Operating voltage : 380V Frequency : 50Hz Ingress protection : EExe II T,IP54 (200-300 °C ) atmosphere( protection against ingress of particles) Mixer auger: -Rpm. :58 -Diameter screw blades : 300mm -Pitch : 250mm -Thickness 3mm Swivel arm: -Power : 0.55kW -Rotation speed : 6m/min. -Voltage : 380V -Frequency : 50Hz

The onus screw mixer works according to the proven principle of a rotating mixing screw, which is guided along the conical tank wall at a constant distance by means of an orbital alarm. The product flow is characterized by an intensive but gentle mixing of the individual particles. Suitable for demanding products in the pharmaceutical, chemical or food industries, it ensures a uniquely gentle mixing process. General data: Volume : 4500L Operating temp. : 25-35 °C Operating voltage : 380V Frequency : 50Hz Ingress protection : EExe II T,IP54 (200-300 °C ) atmosphere( protection against ingress of particles) Mixer auger: -Rpm. :65 -Diameter screw blades : 300mm -Pitch : 250mm -Thickness 3mm Swivel arm: -Power : 1kW -Rotation speed : 6m/min. -Voltage : 380V -Frequency : 50Hz

VR 4A/1250 Producer Mas Max. drilling diameter 50 mm Max. vertical arm adjustment 750 mm Taper in spindle 4 Morse Main motor output 4 kW Dimensions l x w x h 2250x1055x2970 mm Machine weight 2700 kg

Ribbon system Covema-Schwabe Y.O.M. 1994 User manual with functional overview - Machine control elements - Program overview - Commissioning and storing removal Reel MHM 2 - hydraul. Spreading (motor 1.5 kW / 1500 U) - hydraul. Pressure roller - with drive max. coil weight - 2 t Coil outside through. - 1650 mm Coil inner throughm. - 350 - 460 mm Bandwidth - 400 mm Feed machine VRMA 32/96 Bandwidth 320 mm Straightening roller sifm. - 40 mm, 7 pcs Straightening head can be done by hydraul. to open Intermediate air central. Controller more info on request

Power bottle 10 ml, 400V / 50Hz , the line includes: a filling machine BOSCH, type FLP 3060, production 12,000 bottles / h, 6 filling stations, with self-enspirating stainless steel rotary lobe pumps, dosing accuracy +/- 0.5%, insertion of the spray pump, a vibrating machine, filling pumps available: 6 stk.C-BOSCH sealing machine for pressure closure, type VRK 4010, max production 12,000 bottles / h.

PLC control, supply unit, converter, power module, U/E module, digital power amplifier -Manufacturer: Hydraulik Ring, digital power amplifier -Type: VRD 350 -Voltage: 24 V -Dimensions: 220/80/H130 mm -Weight: 0.8 kg

Shell sealer Rühle VR1, built in 2005, in a good used and functional condition. Metal parts made of stainless steel. Packaging machine / tray sealer with scale and label printer, weighs, packs and labels the goods in a single operation. PC control. Supplied with two mould inserts. Machine is prepared for fumigation. Machine is rollable. Dimensions W/D/H 60/70/170 cm. Power ratings 230 Volt, 1,5 kW. Workshop tested, immediately ready for use. More on request.

4-roll plate bending machine Mod. VRM NG HY 3000x40 Country of manufacture: Switzerland YOM: 1997 Brand: HAEUSLER AG Roll diameter 560/540/400 mm Roll thickness 40mm Roll length 3000mm Motor motor Power:55kW System: Hydraulic Voltage: 380V/3 phase Weight 45 000kg The quality of the machine is still very good.

Machine Type: Kieserling Six-Roll Pipe Straightening Machine Working range Ø 5 to Ø 45 mm Flow Direction: Right to Left Speed 37 / 50 / 75 meters/min Make Kieserling, type VRM 35 Year of construction Refurbished in 2023 Location: Solingen Weight approx. 2,000 kg with substructure and drives Country of origin: Germany Delivery terms ex works

Machine type: Kieserling VRM 20 Flow Direction: Right to Left Target speed with 3-speed manual transmission, m/min 37.5 / 50 / 75 Main operation 1.5KW Make Kieserling, type VRM 20 Location: Solingen NRW Length 2,200 mm Width 500 mm Height 1,700 mm Weight approx. 600Kg Country of origin: Germany Delivery condition Ex-works Solingen, free loaded truck

Machine Type: Kieserling Six Roll Straightening Machine Working range from Ø 18 mm to Ø 100 mm Flow direction: from left to right Speed 37.5 / 50 / 75 m/min. Make Kieserling, type VRM 75 Location Solingen Length 1,970 mm Width 980 mm Height 1,900 mm Weight approx. 3,900 kg Country of origin: Germany Delivery time approx. 12 weeks Other: The machine is completely overhauled by our specialist company.

Machine Type: Kieserling Six-Roll Pipe Straightening Machine Working range Ø 3 to Ø 20 mm Flow Direction Right to Left Speed 37 / 50 / 75 meters/min Make Kieserling, type VRM 000 Weight approx. 800 kg Country of origin: Germany Delivery time approx. 8 weeks

Machine Type: Kieserling Six-Roll Straightening Machine Working range Ø 6 to Ø 60 mm Flow Direction Left to Right Speed 37 / 50 / 75 meters/min Make Kieserling, type VRM 60 Weight approx. 3,800 kg Country of origin: Germany Delivery time approx. 12 weeks

Machine Type: Kieserling Six Roll Pipe Straightening Machine Working range Ø 5 to Ø 45 mm Flow Direction Left to Right Speed 37 / 50 / 75 meters/min Make Kieserling, type VRM 35/45 Location Solingen Weight approx. 2,800 kg Country of origin: Germany Delivery time approx. 12 weeks Delivery condition ex works Other: Important: the machine is currently being overhauled by our company. The pictures show a machine we have just delivered. The one offered here will be in equivalent condition at the time of delivery!

LWB Steinl Injection Machine Type VREFE 1600/1000/170 Heating platen size 500 X 510 X 63 mm Sliding platens Top and bottom ejectors Clamping force 1600kN Opening force clamp 100kN Clamping stroke 395mm Injection volume E 1000 ccm Max. Injection Pressure E 2200 bar Injection volume EF 170 ccm Max. Injection Pressure EF 1800 bar Hours: 700 since new Year 2009 Weight 6000kg

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Precision wedge shoes AirLoc Load capacity 25,000 kg detached Insulating plate and anti-slip plate at the bottom Anti-slip plate on the top Overall height 88 mm in central position Adjustment range 13 mm Size 370 x 230 mm Weight 31.8 kg - New - unused - 21 pieces in stock Unit price

MAS VR5A, Radial drill, 1500mm arm, MT 4, low price, Can be inspected under power in our warehouse, Arm : 1600mm, Weight : Weight 3,7 Ton, Spindelmotor: 4 kW - 28 - 2500 RPM, Clamiping area : 1800 x 1000, Max dia in steel : 50mm, Max dia in cast iron: 60mm, Max threading in steel : M30, Max threading in cast iron : M42, Distance table spindle nose : 1600 mm

filtration performance: . l/min fleece width: . mm temperature: . °C The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 6112A : prompt, Zwischenverkauf v : China : 110 € : 1 : 530 - 870 mm : 700 kg : 20 kg : 2 x 125 mm : 52 mm : 2 univsersal useable (band saws, circular saws, eg.) infinitely variable height adjustment perfect for round tubes, because of V-type The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter:500 mm workpiece weight:30 kg test dia. min.:200 mm total power requirement:0,03 kW weight of the machine ca.:1000 kg dimensions of the machine ca.:1x0,5x1,06 m

Scheuch dedusting system 4,000 m³/hr

Scheuch dedusting system 11,000 m³/hr

Haeusler VRM-HY-N - 3000 x 20 mm CNC Number of rolls: 4 Roll capacity cold: 3000 x 20 mm Pre-bending : Yes

roll diameter: 51 mm Wheel width: 125 mm weight: 20 kg height adjustment: 560-975 mm Furnishing: - Heavy three-sprue design for maximum loads - Roller support steplessly height adjustable and clampable - Safe workpiece support - Solid and heavy-duty galvanized steel rollers - With two rollers, each 125 mm long, ideal for pipes, ... techn. Data : Roll width 2 x 125 mm Roll diameter 51 mm Height adjustment 560 - 975 mm Load capacity, max. 700 kg Standpipe diameter 74/52 mm Weight approx. 20 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU254S1022 LocationBarneveld CEcheck MakeZenner Ventilatoren GmbH TypeVRZ 280/50/1 WBN Pressure Pressure buildup0.005 Bar Main Features Capacity7.8 m3/Min Motor0.55 KW Pressure0.005 Bar Specified Features - Blower Blowercheck Capacity472 m3/h (total increase of pressure 510 Pa, density 1,197 Kg/m3) Motor0.55 kW 220-240/380-420 Volt Inletdia 135mm Outletdia. 105mm MaterialMild steel With jacketcheck General No.78154 Year of construction2015 Floorspace0,6x0,5 M Total height1,0 M Weight120 KgBlowersZenner Ventilatoren GmbHBlowers > BlowersBrand > Zenner Ventilatoren GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU355W952 MakeVollrath TypeVRG-10 No.26241 Year of construction2015 Mounted on legscheck Main Features MaterialMild steel Volume2500 Ltr. Motor7.5 KW Specified Features - Stirring vessel Closed stirring vesselcheck Capacity2500 l. Vessel sizesDia. 1330x1750 mm Slope bottomcheck Flat top sidecheck ManholeDN500 Top connectionscheck OutletDN50 with valve With anchor stirrercheck Motor7,5 kW, 400 volt, 1470 rpm Speed mixing shaft14,8 rpm MaterialMild steel With jacketcheck General LocationBarneveld Floorspace1,70x1,70 m Total height3,30 m Weight2000 kgStirring vesselsVollrathStirring vessels > Stirring vesselsBrand > Vollrath What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Pl ...

General SKU254S1023 MakeZenner Ventilatoren GmbH LocationBarneveld CEcheck TypeVRZ 560/20/1 ZAH Pressure Pressure buildup0.1 Bar Main Features Capacity0.6 m3/Min Motor5.5 KW Pressure0.1 Bar Specified Features - Blower Blowercheck Capacity36 m3/h (total increase of pressure 10038 Pa, density 3,13 Kg/m3) Motor5,5 kW 400/690 volt Inletdia. 105mm Outletdia. 50mm (2x) MaterialStainless steel 2.4605 (Alloy 59) With jacketcheck General No.79.016 Year of construction2016 Floorspace2,0x1,2 M Total height1,2 M Weight400 Kg ATEX designedcheck Extra SpecificationsMax temperature 310-370 degr. Cwith extra small cooling fan 0.37 kW 208-255/360-450 voltBlowersZenner Ventilatoren GmbHBlowers > BlowersBrand > Zenner Ventilatoren GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination ...

Operating pressure: 10bar, max. temperature: 40°C, cooling medium: R134A, quantity: approx. 500g, weight: approx. 450kg. An on site inspection is possible.

Replacement gearbox for Nauta mixers, Vrieco mixers For the most common cone mixers, we have numerous used gearboxes and swivel arms in stock. Partly already revised and partly unrevised.

material width: 0200 mm material thickness: 3,00 mm no. of straightening rolls: 21 sheet thickness - min.: 0,50 mm diam. of the rolls ca.: 30 mm speed: 56 m/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Hydraulic drive All rollers driven Side belt guide with handwheel PSS300 control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.