128,402 used machines on RESALE, but how to find them? Machine Search
max. wheel diameter: 650 mm gear width: 200 mm max. module: 10 min. module: 1 work accuracy: DIN 6 clamping table diameter: 710 mm table bore diameter: 150 mm number of strokes - stepless: 35,5 - 560 c/min max. ram stroke: 230 mm feeds: 3,55 - 40 mm/min radial feed: 0,8 - 9 mm/min work-spindle diameter: 110 mm total power requirement: 28,2 kW weight of the machine ca.: 9 t dimensions of the machine ca.: 3,8 x 2,3 x 2,5 m Gear shaping machine for the production of spur gears, for Internal and external gears - Built under licence from LORENZ and identical in construction to LORENZ LS 630 complete Modernisation + overhaul in 2012 with: - new painting - new electrical system from Telemecanique - Counter Holder - Chip conveyor - Coolant unit - change gears Not used in production again after overhaul The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 630 mm y-travel: 700 mm z-travel: 630 mm Control: Meldas M650 tool adaptor: HSK-A63 Table dimensions: 450x450 mm Table load: 400 kg number of spindle speeds: 300 - 20.000 min-1 total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m FEED RATE Rapid feed rate X,Y 120 m/min Rapid feed rate Z 60 m/min Rapid feed rate B 120 m/min Cutting feed rate X,Y,Z 0,1 – 60 m/min SPINDLE RPM spindle 300 – 20.000 min-1 Spindle taper HSK-A63 Coolant Through spindle ATC Tool holder Special HSK-A63 2 Face contact tool Tool magazine storage 40 pcs Tool change time 2,5 sec. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t stroke: 300 mm Cylinder: 205 MM distance between table / ram: 520 mm table surface area: 1100X350 mm ram surface: 350X350 mm total power requirement: 7,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
We sell 12 x IBM LTO7 FH FC 8-01434-01 tape drives for Quantum Scalar libraries In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. We have available complete systems and components in refur ...
Bore diameter: , Number of heads horizontal: , Number of heads vertical: , The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Table dimensions: 1000,400 mm pneumatic clamping: 2 St. moveable: Option For quick pressing of Minizinken- or Soflineverbindungen - Independent of the angle - Particularly suitable for arched manufacturing in window - Table size 1000 x 400 mm - Pneumatic connector 10 bar - Air consumption: 0.5 cdm / stroke - Two clamping cylinders for workpiece clamping - Right half of the table stored on hardened shafts via linear ball bearings - 1 pressure cylinders for linear displacement table - CE - execution (technical data according to manufacturer - without guarantee.!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 300 t chamfer lenght: 3050 mm distance between columns: . mm Control: Cybeleg type: DNC880S total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: . mm grinding width: . mm workpiece height: . mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max. in kg: 2500 kg stroke: 3200 mm fork length: 1000 mm Drive: Gas Side shift: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 4,25 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 3000 mm table width: 1500 mm burner heads: 1 laser capacity in Watt: 2000 table:: 2 x-travel: 3010 mm y-travel: 1510 mm z-travel: 100 mm control: Bosch type: CC320 Trumagraph mm total power requirement: kW weight of the machine ca.: 15,2 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
working length: 6000 mm Working width: , mm Working height: , mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. workpiece length: 4500,6000 mm profile spindle: 3 Stück main drive: 24 kW Control: Siemens 840d Working Process Logos Life Evo XS 2345 ------------------------------- Vollautomatisches CNC-Fensterfertigungsanlage mit automatischer Be- und Entladung. 2 Portale mit 3 Frässpindeln mit 4- und 5-Achstechnologie CNC-gesteuerter Manipulator für Werkstückpositionierung mit 16 Stück Doppelzangen 8 Stück komplett unabhängige Werkstückspanner für höchste Felxibilität und Produktivität 128 Werkzeugplätze NEU: Working Process baut nun auch 1-spindlige Anlagen mit bewährter Technologie für kleinere Betriebe! Nebenstehend finde Sie aktuelle Videos dieser Baureihe. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Number of sanding units: 2 St. sanding width: 190 mm Sanding height max.: 2-180 mm LÖWER-Doppelseitige Schleifmaschine DSM 2000 Doppelseitige Einzelholzschleifmaschine zum Schleifen von Massivholz wie z.B. Fensterhölzern etc. Stabile Top-Aus- führung mit langen Gußtischen, Bürst- und Finisheinrichtung und Transportbandvorschub. Geeignet für hohe Dauerbelastung auch bei höheren Spanabnahmen. - versetzt angeordnete Schleif- und Finishaggregate oben und unten - direkt angetriebene gummierte Schleifrollen für schlupffreie Kraftübertragung - Kombischliff über Rolle und Schuh für hohe Spanabnahmen bei gleichzeitig ebener Eingriffszone - wartungs- und verschleißfreie CERMET-beschichtete Schleifschuhe mit sehr guter Wärmeleitfähigkeit und absoluter Maßhaltigkeit - Fremdkühlung der Schleifzonen für einen kühleren Schliff und höhere Schleifbandstandzeiten - zwangsgeführte pneu ...
LS8 2500 knotted mesh production machine was built in 2016 in Poland by Maszyny S.C. The machine is used in the efficient production of durable and damage-resistant L-, M-, S- and SL-type mesh. The entire production process, from wire feeding to net braiding, is performed fully automatically. The fixed knot fence production line weighs 2600 kg. Technical specifications of the LS8 2500 knotted mesh production machine - type of produced net : L, M, S, SL - maximum height of the produced net: 225 cm - horizontal wires spacing: 15 or 30 cm - number of horizontal wires: 26 pcs. - edge wires diameter range: 1.8-3 mm - inner wires diameter range: 1.5-2.5 mm - edge wires maximum stress: Rm=1200 MPa - horizontal wires maximum stress: Rm=450 or 1150-1200 MPa - vertical wires maximum stress: Rm=450-500 MPa - power: 11 kW - pneumatic pressure: 0.6 MPa - power supply: 3x 400 V; 50 Hz ...
table length: 225 mm table width: 175 mm x-travel: 120 mm y-travel: 110 mm table height: 140 mm T-slots: 12 mm weight: 17,5 kg dimensions: 0,35 x 0,35 x 0,22 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1020 mm plate thickness: 3,5 mm roll diameter: 90 mm total power requirement: 0,75 kW weight of the machine ca.: 310 kg Electric 380 Volt: Foot switch: Symmetry roll arrangement. This machine is in the following sizes obtainable: worhing length from 1020 until 2520 mm, max. plate thickness ( 400 N/mm² ) from 1 until 8 mm. Machine dealer with own stock of 2500 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1290 mm plate thickness: 5 mm pre-bending: ja roll diameter: 120 mm roll speed: 1 - 6 m/min total power requirement: 1,1 kW weight of the machine ca.: 825 kg Asymmetry roll arrangement, pre-bending ist possible. This new machine is in the following sizes obtainable: working length from 1040 until 2540 mm, max. plate thickness ( 400 N/mm² ) from 1 until 6,5 mm. We are distributor only for Germany. Machine dealer with own stock of 2500 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
LS6/4 knotted mesh production machine was built in 2006 in Poland by Maszyny S.C. The machine enables the efficient production of durable and damage-resistant L-, M-, S- and SL-type mesh. The entire production process, from wire feeding to net braiding, is performed fully automatically. Technical specifications of the LS6/4 fixed knot fence production line - type of produced net: L, M, S, SL - maximum height of the produced net: 200 cm - vertical wires spacing: 15 or 30 cm - number of horizontal wires: 25 pcs. - edge wires diameter range: 1.8-3 mm - inner wires diameter range: 1.5-2.5 mm - edge wires maximum stress: Rm=1200 MPa - horizontal wires maximum stress: Rm=450 or 1150-1200 MPa - vertical wires maximum stress: Rm=450-500 MPa
used
CNC Model: Heidenhain CNC Version: ITNC 640 Head Type: Automatic Fourth and Fifth Axis Head Additional technical notes for the head: 0.001° positionable head Tool Mount: ISO 50 Spindle power: 38Kw Number of spindle speeds: 4000 Number of tools: 40 X-axis travel: 4000mm Y-axis travel: 1300mm Z-axis travel: 1500mm Fast feeds linear axes X Y Z: 20m/min Table dimensions: 4100 x 1100mm Table capacity: 12000Kg Guides: roller CNC divider: yes Rotation: Continuous Cutter type: fixed bench Chip conveyor: belt Machine equipment: optical scales :::D DIMENSIONS AND WEIGHT::: Length: 10560mm Width: 4200mm Weight: 26000Kg
weight max.: 3000 kg speed: max. 10.0 km/h Number of working hours: 12.165 h weight of the machine ca.: ca. 1000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Multi-storey shelving system As good as new 4 staircases Year of construction 2016 Modular and compatible Combination of shelving system and steel construction Efficient and economical use of space on 2 floors 2-storey construction More ergonomic usability during order picking Benefit from all the advantages of the SCHULTE plug-in system when multiplying your storage space, such as the compatibility of the 25 mm grid perforation and the variety of accessories. The coordination between the perforation of the MULTIplus T-profiles in a 25 mm increment and the edge height of 25 mm of the shelves enables optimal adaptation to the goods to be stored. Manufacturer: Schulte Lagertechnik Shelving system: Plug-in system Shelf type: 2-storey shelving system Number of stage levels: 1 Floor space: 13.18 m x 16.7 m Square meters: per floor 220.11 m² Height 1 floor: 218 ...
x-travel: unbek. mm y-travel: unbek. mm z-travel: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Year of manufacture 2019, top condition, only approx. 300 hours Machine housing: solid stainless closed base plate Screw housing : stainless Working auger : stainless Feeder auger: stainless, horizontally extendable Lock nut: stainless Cutting device : included incl. cutting set for fresh meat and insertion rings Perforated disc diameter: 130 mm with main switch / 2 speed / push button Motor power: 12.5/15 KW / Voltage: 400V / 50Hz incl. the following additional equipment : +Safety cover for cutting set - +Separator device incl. SEP cutting set and Sep support cross with adjustment and discharge tube +Z-agitator: 1.5 KW (can only be used for FF), enlarged Hopper capacity approx. 355 I incl. machine elevation and safety step mech. Ejector (of the working screw) by means of lever on machine, microprocessor-controlled (PLC) Membrane keypad and control cabinet stainless st ...
power capacity: 3 kW volt: 380 V ampere: 6,8 A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Year of manufacture 2019, top condition, only approx. 300 hours Machine housing: solid stainless 2 rotation directions Emptying by hydraulic tilting of the mixing trough Membrane keyboard with plain text display in German Automatic mixing time preselection Control cabinet built-in, main switch Microprocessor Control (PLC) Mixing speed speed: infinitely variable Mixing tank: 500 litres Motor power 7.5 KW / voltage 400V / 50Hz Incl. MA 20 automatic mixing: for up to 20 programs (forward/backward/pause/total time and mixing speed speed) Incl. Z-mixing arms instead of paddle shafts Incl. protective grille: welded construction made of stainless steel, hydraulically operated Incl. 2 operating instructions with machine With mast feeding system BA24 Hydr., stainless, for standard wagons
DEPA Compressed Air Diaphragm Pump Manufacturer: Alfa-Laval Type: DL40-UL-T-T Item #: 09855 Year of construction: 1999 LBH: 350 x 460 x 700 mm
Vacuum pump Manufacturer: LEMA 25 AZ FAA OA O Item #: D-3402461 LBH: 350 x 180 x 220 mm
For sale: 2x polyethylene (PE) drip tray for 1 IBC, with PI footprint Manufacturer: DENIOS Type/ Model: Classic-Line IBC Manufacturer information: --Grating: Plastic Pallet Mobility: Wheelchair accessible Material: Plastic Collection volume [l]: 1000 Total load capacity [kg]: 2000 TARA/ Weight [kg]: 96 Width outside [mm]: 1430 Depth outside [mm]: 1430 Exterior height [mm]: 965 Admission: -DIBt Approval/Certificate Description: 1Z-40.22-303 Colour: blue -Ideal for the storage of various acids and alkalis or, for example, non-flammable cleaning chemicals and substances of all water hazard classes. -Depending on the dead weight of the IBC, liquids with a specific gravity of up to 1.8t are suitable -Stable footprint for safe storage of IBCs -Optimal corrosion protection, as it is made entirely of polyethylene (PE) Price: Per piece! NP. / Piece: 1069,00 Euro
Shaper cutters from Module 1 to Module 14 available: - different no. of teeth, different pressure anles, different profiles, bores and sizes! shaft cutters Module 1-3 = 150 Euro, 4-5 = 250 Euro, >5 = 300 Euro disc cutters Module 1-3 = 150 Euro, 4-6 = 200 Euro, 7-10 = 250 Euro, 10-14 = 300 Euro. complete list on request! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
1 Alfa Laval UHT line An Alfa Laval indirect tube UHT system Year of construction 2000 Output 12,000 L7h Compactly positioned on 6 x 4 m" with: a.) Tube heating plant, on frame upright, laterally shielded by Mudguards, temperature up to 145 °C without sterile tank, with low overflow completely piped in the direction of the filling machine, with flow vessel for the return flow. b.) 1 Alfa Laval homogeniser 3 pistons, power as mentioned above. Pressure up to 210 bar. Works in the ascending temperature range around approx. 65 to 85 °C c.) 1 control cabinet with Siemens S 7 control and with complete cabling. The Alfa Laval UHT system is located on the production site in southern Germany and can be visited in the company together with me become.
pressure: 320 t chamfer lenght: 4000 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 25 t dimensions of the machine ca.: m Brand: LVD Type: PPEB 320/40 CNC brand: Morris CNC model: Solutions ESA 630 Year of make: 1990 Hydraulic Capacity: 320 T Bend length: 4.000 mm Multi V + J-knive Steered backstop X+R Incl. 1 Set of tools Machine weight: 25.000 kg Machine is flat on the ground The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
current intensivity: 400 A open-circuit voltage: 65-75 V IP protection class: IP21 Permissible load at 35% duty cycle 400 A at 60% duty cycle 315 A at 100% duty cycle 250 A Idle power 0.49 kW Application class: S - Water cooled - With hand and foot remote control - Incl. Hose package approx. 6000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
1000 litre bottom flap mixer with ploughshares 3 kw-67 rpm Chain drive
1 x used double-sided Rotoles S600 with 2 grinding units and 1x brush Working width 600mmm Speed 60m/min Calibration milling planing machines with feed rollers Best accuracy of the boards and excellent results in delamination attempts, at any speed. ROTOLES S calibration machines are the best choice for calibrating boards and slats before gluing. Rotoles S calibration milling planing machines with feed rollers Best accuracy of the boards and excellent results in delamination attempts, at any speed. ROTOLES S calibration machines are the best choice for calibrating boards and slats before gluing.
Alligator scissors Lindemann Alibo The Lindemann Alibo has a mechanical hold-down. The scissor head is protected with a safety basket. Machine On hand Knife length : 760 mm Weight : 4200 kg Mouth width at the tip : 200 mm Cutting capacity: 0.45 kN/ mm² : Ø 70 mm Number of strokes : 20 – 40 cuts/min Dimensions: 4.20 x 1.50 x 1.80 meters Drive: 15 kw Hold-down: Mechanical
maximum number of results exceeded
please refine your search
